Cisco Prime Unified Operations Manager 9.0, "Service Level View" problem.

Hello to all.
Hope this mail finds all of you well.
I have a problem with a CUOM Prime 9.0.
The customer's infrastracture is a cluster CUCM (VM), 9.1.2.
The CUCM cluster is up and running and all the cisco devices can be discovered.
The customer wants to use a Cisco Prime Unified Operations Manager 9.0 in order to monitor all the Cisco devices.
Also, in the CUOM server have been installed the browser "I.E 8.0" and the browser "Firefox Mozila" (Firefox Setup 10.0.5esr).
The problem that I faced is that the page "Service Level View" can not be displayed.
When I try to use the "Internet Explorer" the loading bar is being displayed, but can not be completed.
When I try to use the "Firefox Mozila" a message is being displayed and prompt me to install the last Flash Player,
which is already installed.
Can anybody help me on that problem?
Thank you very much in advance.
Regards,
Isidoros

Finally, the solution of the problem was:
1-stop the daemon manager “net stop crmdmgtd”
2- Delete the xml files available under(please take backup from them) :
CSCOpx\objects\sir\work
CSCOpx\objects\topo\work
3-Start the daemon manager net start crmdmgtd (wait for 20 minutes until all process are up )

Similar Messages

Cisco Prime Unified Operations Manager 8.7 Server Requirement

I need a clarification regarding the Windows Server OS requirement for installing Cisco Prime Unified Operations Manager 8.7 with Service Monitor.
The data sheet says Win 2008 (R1) Enterprise edition.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/data_sheet_c78-697491.html
The installation guide says Win 2008 (R1) Std or Enterprise.
https://www.ciscosystems.net/en/US/docs/net_mgmt/prime/unified_operations_manager/8.7/install/guide/cuom_installguide.book.pdf
My server is running on Windows 2008 (R1) Standard Edition, will I be able to install Cisco Prime UOM 8.7 on this server????
The hardware meets the requirement. I am confused only with the Windows Server OS part as both documents are contradicting.

I need a clarification regarding the Windows Server OS requirement for installing Cisco Prime Unified Operations Manager 8.7 with Service Monitor.
The data sheet says Win 2008 (R1) Enterprise edition.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/data_sheet_c78-697491.html
The installation guide says Win 2008 (R1) Std or Enterprise.
https://www.ciscosystems.net/en/US/docs/net_mgmt/prime/unified_operations_manager/8.7/install/guide/cuom_installguide.book.pdf
My server is running on Windows 2008 (R1) Standard Edition, will I be able to install Cisco Prime UOM 8.7 on this server????
The hardware meets the requirement. I am confused only with the Windows Server OS part as both documents are contradicting.

Migrating from Cisco Prime Unified Provisioning Manager 9.0 BE to Prime Collaboration 9.0 Provisioning

Hi All,
    Cisco BE 6000 9.X support both Cisco Prime Unified Provisioning Manager 9.0 BE and Prime Collaboration 9.0 Provisioning as its management tool. OVA for both applications are pre-loaded on server from factory starting end of March 2013.
    For some customers that start with Cisco Prime Unified Provisioning Manager 9.0 BE, and want to migrate to Prime Collaboration 9.0 Provisioning for advanced features, they can follow the following guide for migration.
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/unified_provisioning_manager/9.0BE/migration/guide/migrate_90be_pc90.html
    For more collaterals for Cisco Prime Collaboration, please visit
http://www.cisco.com/en/US/partner/products/ps12363/index.html
Best
Jing

Finally, the solution of the problem was:
1-stop the daemon manager “net stop crmdmgtd”
2- Delete the xml files available under(please take backup from them) :
CSCOpx\objects\sir\work
CSCOpx\objects\topo\work
3-Start the daemon manager net start crmdmgtd (wait for 20 minutes until all process are up )

Unified Operations Manager 8.x Software Download

Hello Team,
We has been ordered L-UOM-B-500= Unified Operations Manager 8.x up to 500 IP Phone LIC-K9 ,now customer need to download the software ,Please suggest how we can download the software.
Thanks Is Advance

Hi there,
The OVA's and .zip are located here
Downloads Home
Products
Unified Communications
Unified Communications Management
Cisco Prime Unified Operations Manager
Cisco Unified Operations Manager 8.6
Unified Operations Manager Software-8.6
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen

Event in Cisco Unified Operations Manager makes no sense

Hi
The ennvironement is as follows:
3 CCM 4.x Cluster and lot of h323 Gateways. All is controlled by a gatekeeper.
For monitoring purposes I'm running a Cisco Unified Operations Manager 2.0.2. From a h323 gateway I recieve an event, that there happend packet loss and that the MOS was below the critical MOS threshold. As destination I see another h323 gateway in the same cluster. What does this mean? For me there is never voice between these 2 gateways. For me this event makes no sense. On the gateways everything looks fine, there are no drops or errors neither on the interface nor on the service-policy.
Any idea why it's generating this event?
Regards
Peter

Hi Peter,
I think it would be best if you could get a packet capture (at the point of the 1040 sensor) during the times of one of these low MOS scores and then open a TAC case. The TAC engineer will need to contact the 1040 sensor developers to understand how exactly they are calculating packet loss and the packet capture will help greatly in finding the root cause. There are two components to packet loss for a 1040 sensor.
1) Actual network packet loss (i.e. based on missing sequence numbers).
2) Packets lost in the jitter buffer emulation (packet discards). This will
count as a packet loss for any packet that arrives 20ms past its expected
arrival time OR any "out of order" packet. Since the packets for a G711 are
sent at a 20ms rate, a packet which is delayed 20ms may arrive out of order and
be counted as lost.
Sri

Unified Communications Operations Manager 8.0: How can I get rid of exlamation marks in Service Level View?

Hi all,
In Operations Manager I open the Service Level View and there are 3 exclamation marks visible for some devices. I acknowledged all alerts & events and they are already cleared now, but I'd like to know if I can get rid of the exclamation marks in Service Level View too. Is this possible?
Kind regards,
Richard
Message was edited by: Richard Bovens

Nancy,
You are God!
It worked!
Thanks.
I have a dumb basic question which is sort of related to your shambles comment, which I don't deny is true.
I am confused about whether style.css files get affiliated with each separate HTML page or whether there is just one style.css file that is affiliated with all my HTML pages. If they are separate CSS files, how do I separate each style.css file?
Best, P.

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Cisco video surveillance operations manager error

Hi!
Does anyone know What does mean "HttpHandler. 11391: critical coredump" error in cisco video surveillance operations manager?

Okay, well... right away; there is a very serious issue concerning the fact that mysql no longer appears installed on the server:
01-vssoftware.txt
Video Surveillance Operations Manager
MYSQL: !! MySQL is not installed and is required
Which would indicate the root of your issues. It appears something may have actually removed the package.
I also noticed from the roothistory that you've installed some other third party tools and executed what I assume are some scripts that appear to remove things? Perhaps check there?
My recommendation is to pull a valid backup and perform a recovery with the Cisco Recovery DVD. If this is not an option, you'll likely need to open a TAC case to determine how mysql has been broken, and how to correct it.
Best of luck,
Scott.

UOM service level view

Hello,
I had installed Unified Operations Manager 9.1.1 on a customer site.
the problem is that I cant see the presence cluster & cube router (they are monitored on the system) on the service level view.
all the other systems are monitored and displayed on the service level view successfully.
any help ?
BR,
Liran.

I don't think you can change much there.
You see the map display pane if you have mutiple clusters managed, or the just the cluster if you have only one cluster.
I'm not 100% sure, but if you have multiple clusters you can do a rightclick on the cluster in the left pane and make it the default view to make it show that cluster by default.
Cheers,
Michel

Cisco Unified Operations Manager v Cisco Service Monitor

I am unfamiliar with both od these products. Both seem to overlap in that they seem to aim for end to end voice quality management, relying on the 1040 probe.
Am I off base here? Are they similar products, one or both maybe OEM'd???
Are they widely deployed?
Any thoughts welcome.
Regards

Hi Gordon,
They are very much complimentary. In fact, installing OM used to install SM by default on same box.
OM doesn't collect info from the 1040 probes. SM does this, and then alerts to OM if thresholds are breached.
OM will then display the alert.
Operations Manager is very much about actively monitoring the health of the UC environment. Here's a couple of practical examples of what it does:
- Maps out a logical view of the environment
- Performs scheduled tests - checks CM reg, dial tone, TFTP
- Simulates calls with both synthetic phones and even real phones
- Interactive tests - check phone features are working etc
- Performance management - view utilisation of GW's CM's etc.
- IP SLA - simulated calls, jitter testing across the network using routers / switches and IP SLA features
- Alert monitoring - dashboard view
Service Monitor is very focussed on measuring the actual user experience of calls.
- It can use CDR / CMR records (with no 1040 HW sensors deployed) to record, and monitor the quality of individual calls
- It can also use the 1040 HW sensors to collect more granular call quality details.. (it sends the details to SM via syslog constantly)
- Report and alert on call quality based on thresholds (Alerts are sent to OM and appear in your alerts window)
The only real overlap I would say is that OM does some quality tests with IP SLA, but it is based on synthetic calls rather than working with data about real calls.
There is also another module, Unified Service Statistics Monitor, I'd recommend looking at this too, it provides the historical component, and also a variety of different reporting - including service levels and executive style dashboards.
I've done a few deployments. Standard network management principles apply, and I think this is where a lot of them fall down. No product can manage your network for you automatically, the biggest part is people and process. Once you have this in place you can definitely use products like OM, SM to automate and simplify.
The larger and more complex your network, the more valuable and useful these products can become.
My recommendation is to get the eval copy, and try them out. You do need to think carefully about what you want to achieve though, without this step, an install of these products probably won't impress. The art is all about the setup.
Cheers,
Tim

Unified Operations Manager / Service Monitor

Service monitor does not recognize any phones registered to a CUCM 6.x cluster.
1040 Sensors do recognize phones.
Any idea why the CUCM phones are not recognized ?
Thanks, Wolfgang

Naveen:
Spanning does not affect the phone count from a cluster and that is Wolfgang's issue. It only affects the phone count from the 1040 sensors.
Wolfgang:
A phone count of zero for a cluster usually means there are no cdrs being pushed from the CUCM 6.x.
1) Are you getting any records in the CVTQ reports?
2) Does it show success for both HTTP and CDR on the CUCM credentials page?
3) Are you sure that you have done the task of "Setting Unified Communications Manager Service Parameters" on every CUCM in the cluster as mentioned in the following url.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_service_monitor/2.0.1/user/guide/confccm.html#wp1037067

Broken Cisco Unity / Unified Communications Manager association

We have several Cisco Unity Connection users with the following status in their profiles:
"This user's association to the co-resident Cisco Unified Communications Manager user has been broken.
Please Click Here to reassociate the orphaned user."
Clicking on the reassociation button does not show any of the users with broken associations, just a few resource users.
Is there any way to reassociate these users with CUCM without having to delete them in Unity Connection along with their mailboxes?

These are the steps I took to resolve the issue. I was particularly concerned about users losing saved messages in their voicemail. The posted solution did not give much detail on what to do.
1) Create a new user in CUCM. For example, I have a user called 'John Doe' in the system. I created a new one called 'John Doe2'.
2) After creating the user I associated 'John Doe2' to the phone in use by 'John Doe'. Then I set the Primary Extension as needed for that user. Hit the 'Save' button and verify that the 'Create Cisco Unity User' option shows up in the drop-down box in the right hand corner.
3) Log into Cisco Unity Connection Administration, and select 'John Doe'. Click on the link to re-associate and select 'John Doe2'. This links the Unity user to the CUCM user.
4) Log back into CUCM and select 'John Doe' from the user list. Remove all device associations from the user. Hit Save, then delete the user.
5) Select 'John Doe2' and rename the user as 'John Doe'.
These steps fixed my problem. I had to do it for all the users whose association was broken. One note to make is that the voicemail PIN is automatically reset to the default I believe, which is 0000. Other than that voicemail continues to work normally and users don't have to redo their greetings and such.

Cisco Prime unable to connect to TAC Service Requests

Always had the problem, but now decided to mess around with it.
When I try to get Cisco Prime 4.1 to connect to TAC Service Request I get the following error....
"There was an error while fetching the list of TAC Service Requests: String index out of range: -1"
I am able to download IOSs and other software with Prime, just not able to connect to TAC.
Thanks

Hi Marco,
actually it took me quite a long time to understand what the problem was. I found that on my CISCO AP i had to put "payload-encapsulation dot1h" on the radio interface to get the WIP310 communicate with the AP.
By the way It seems to me that the phone is a little buggy from the wireless point of view. Sometimes i have to try several times before getting the phone connected to the AP. Once the phone gets connected it's pretty stable, but getting it connected it's a nightmare :-)
Try with the above ption if you have a Cisco AP. Also try different channels on the AP...it might help
Hope this will help you
regards
Nicola

Cisco Prime Datacenter Network Manager 6.2(5)

Hi Guys,
We purchased the Cisco Prime DCNM 6.2(5), I have installed the software on the Windows 2008 R2 server. Now having difficulty adding devices to DCNM now. I tried searching some documentation but no luck so far.
Following are the devices trying to add on DCNM
Cisco 7010
Cisco 6004.
Would appriciate if anybody can guide me on what are configuration required on switches and how to add devices on DCNM.

Please read the DCNM fundamental guide available on cisco website

Unified Operations Manager for Version 9.0 clear the events

Please let me know the procedure to clear the events of the Operations Manager 9.0.

Hello Anthony,
Lets pick up the example of Standard LRG in Pre 10.0.
As a use case we used "LRG" to route calls using Local gateway, preferebly.
For Example:
If administrator wish to create a route to a PSTN/CUCM B from particular site then he could simply have a Route list with Standard Local Route Group.
If the administrator has to add another emergency route to CUCM C/PSTN then using Standard Local Route Group would not help and he would have to make site specific Route list and Route patterns.
eg: 8.XXXX pattern would be used by device on site A to reach site E using RG_A_To_E
7.XXXX Pattern would be used by device on site B to reach site E using RG_B_To_E
With the Multiple LRG Enhancement in CUCM 10.0
On the Device Pool page, We can choose to associate the Emergency Route with a route group or leave it blank.
This will reduce the number of route list and route patters to be created.
EX.
Phone 3 calls Phone 5 via Route List “Route List to Site E”
When Phone 3 (DP_C) calls Phone 5 using route pattern 8.XXXX
Route list layer check that the first route group in the preference order is “Emergency Route Group (Local Route Group)”.
It then checks the route group associated with “Emergency Route Group” on Device Pool DP_C.
There is no Route group associated with “Emergency Route Group”.
Hence the Route list layer would check of for next member in the route list And try routing the call via “RG_General”.
**I hope this explains, if any doubts, please, let me know and we can have a quick call to discuss.
Regards
Amit Singh

Cisco Prime Unified Operations Manager 9.0, "Service Level View" problem.

Similar Messages

Maybe you are looking for