Cisco Prime upgrade (Standard to Pro)

Hello
Can anyone help answer a query we have regarding an upgrade we need to do on Prime Infrastructure, PI.
We are running PI version 1.3 on VMware in a standard deployment.
We want to upgrade to a Pro deployment.
My understanding is that the only difference between standard and Pro, is that additional VMware resources are needed.
On the software download site, there is a separate OVA image for Pro, however there is also a Prime 2.1 upgrade installer image.
Can an existing VMware Prime be upgraded to Pro by increasing the VMware resources and running the upgrade image or does it need a clean install
Thanks
Martyn

You can do a restore on the new VM if you want. I typically have not and I would export the maps from the old version, add the WLC's to the new PI and then import the maps. You can then repost licenses if your running PI 2.1 or earlier. PI 2.2 will take your original license from PI 2.0 & PI 2.1. You would just need to download the license again or open a TAC case to obtain them.
-Scott

Similar Messages

Cisco Prime Collaboraiton Standard Licenses

Dear Team,
I have a customer purchased Cisco CUWL PRO & Enhanced Licenses for 10,000 Users for Unified CM version 8.0 and now he is asking for upgrade to version 10.5. The question is :
1-since he did reinstatement for different type of licenses and already has the order, Should the customer entitle Cisco Prime Collaboration licenses by default or he has to purchase them separately?
2-Does the customer going to receive Cisco Prime Collaboration Standard (Porvisioning and Assurance only) ?, If so for How many license Users it comes by default?. If less than 10000 ,then how to order the remaining?.
Thanks in advance
Regards,

Prime collaboration standard is free and does not require any licenses. Advanced license is separate from any UC user licenses:
Cisco Prime Collaboration Packaging: Standard and Advanced Options
Beginning with version 10.0, Cisco Prime Collaboration is provided in two different offerings. Cisco Prime Collaboration Standard is included with all Cisco Unified Workspace Licensing and Cisco User Connect Licensing, and Cisco Prime Collaboration Advanced is available for upgrade. The Standard option is only available and compatible with Cisco UC 10.0. The Advanced option supports Cisco UC 8.x - UC 10.x. The Standard option enables provisioning of all voice and video services purchased and fault monitoring across voice and video for a single cluster environment. For deployments that require more advanced management, Cisco Prime Collaboration Advanced offers multi-cluster scale, additional automation, deeper diagnostic capabilities, and long-term reporting. This order guide addresses Cisco Prime Collaboration Advanced only.
Customers who are interested in Cisco Prime Collaboration Advanced may activate the “Advanced Evaluation” from within the Prime Collaboration Standard GUI, for a 60 day term, or may purchase a permanent Cisco Prime Collaboration Advanced. For more information about license installation, please refer to the Cisco Prime Collaboration Quick Start Guide 10.0 posted on Cisco.com under ‘Install and Upgrade Guides.
from:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-collaboration/guide-07-729809.html
Chris

Upgraded standard macbook pro vs base macbook pro with retina?

So I'm getting a new Macbook pro for college and the two I'm looking at are about the same price with different benefits. I'm looking for a versatile computer for everything I will do in college. I dont run any super intense photo programs or video editors, I just game and am a standard user. Also I plan on running bootcamp and playing some games on the computer. It's between:
-a Macbook Pro with retina display
    base specs of 8gb RAM and 2.3ghz processor and I would also buy an external optical drive
     The only Cons are that im not sure if 256gb SSD is enough for boot camp and everything i would be doing
-Macbook Pro Standard 15in
   2.6ghz processor and 8gb RAM
   750gb HDD 7200rpm
The price comes out to about the same so im really torn between a retina/portability vs 2.6ghz processor and optical/ethernet
so basically    2.6ghz vs. 2.3ghz       and        750gb HDD vs 256 SSD
any help?

If you are going to load a lot of Windows games, your would probably need the larger HD. If you are using it primarily for school work, internet then 256 SSD is probably enough. I have a Windows partition on the retina version with 256 SSD, and have 140 GB remaining free. But I do not game and use Windows only for Quicken. If you are a student and are going to be carrying around your computer a lot, you might appreciate the lighter weight of the MBP with retina display. However, other poster are correct, there is no upgrade path with either MBP.

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

   Hi guys,
       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
   Two questions
       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
       02) There is a option to install the Standard Version using less HD space ?
      Thanks
      My Best Regards
      Andre Gustavo Lomonaco

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around...

Adobe Reader 8 compatible with Acrobat Standard and Pro 7?

Our organization has Adobe Reader 7 deployed to all users. Some users also have Acrobat Standard 7 or Acrobat Pro 7. We want to upgrade all users to Adobe Reader 8 (or maybe 9) but do not want to upgrade Standard and Pro users yet.
I have not been able to find any information about compatibility issues with Reader 8 and older versions of Acrobat, but last time we did an upgrade in similar fashion we experienced issues. Any insight?

Thanks for the reply. I stumbled across something today after posting. I had already known that If the ARX user also had one of the other products (AAXS or AAXP), then they would get the dialog box. Here is what I just figured out: if the user uninstalled ARX and re-installed (still having both ARX and AAXS or AAXP in the end) then they no longer get the dialog box. It seems like perhaps its an issue the AAXP and AAXS are overwriting something in the registry.

LMS 4.1 (Windows) & NCS 1.1 (VM) Upgrade to Cisco Prime Infrastructure 1.2

Hi All,
Im getting a bit confused about the whole upgrade migration process for the following config to Cisco Prime Infrastructure:
LMS - Version 4.1 , 500 devices. Windows Server 2008 R2 Standard SP1
NCS – version 1.1 , 50 devices Red Hat Linux ( 64 Bit) (Installation software - NCS-VA-1.0.1.4-small.ova)
I want to be able to backup databases and migrate licensing from LMS and NCS to one platform. Does anyone have experience of this and could possible guide me thorugh this process. LMS has SAS and NCS has SAU.
Help will be very much appreciated!!

It's a couple of steps but can be done. You may want to reconsider getting off of LMS since the latest Prime Infrastructure (PI 1.2) does not have full feature compatibility with the latest LMS (4.2.3). Have a look here for the comparison.
If you still want to do it:
1. Upgrade your NCS to PI 1.2 (instructions). If you're going with a total of 550 devices on a combined license you should use the medium ova file to get the correct server resource allocation. You will need to get the new license from the TAC or via the licensing portal. I'm not sure if you can get the PI license for your LMS upgrade directly via the portal but you do have the entitlement for LMS 4.2 and PI 1.2 (combined licenses not to exceed the original LMS number) if your SAS is current. You may need to contact the TAC and ask for the licensing team.
2. Upgrade your LMS to 4.2 and patch it to 4.2.2 (instructions). Once you've done that, there is a simple menu command to export your device credentials to Prime (Admin, System, Export Data to PI in LMS and then Operation, Device Work Center, Bulk Import in PI - instruction on Page 18 here). Do that and then in the new PI installation import the devices.
Verify everything is working and you can decommission the LMS server.

Cisco Prime 1.3 Upgrade Hangs

I'm trying to upgrade our Cisco Prime 1.2 to 1.3. When I complete the command to upgrade, it then asks if I want to save the current ADE-OS to the running configuration. I say yes and it saves it. Then it begins the upgrade process. I get:
Initiating Application Upgrade...
Stage 1 of 7: Transferring file ...
That is where it is stuck at. I have looked at the server I have the upgrade file on and it shows the transfer. The transfer has been running for close to an hour.
Any thoughts or ideas why it would hang here?

Please check the link below to download the software as I feel the steps you are following is correct and you may try to do it again downloading this software. Might the software is not downloaded proper.
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272933&release=1.3.0&relind=AVAILABLE&rellifecycle=&reltype=all
even for step by step installation.
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3.1/release/notes/cpi_rn_13_update1.html#wp99493

Upgrade NCS 1.1.1.24 to Cisco Prime Infrastructure 1.2

Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.
I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same success as described in the document (see below):
gmsncs/admin# dir disk:defaultRepo/
Directory of disk:defaultRepo/
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 1544204288 bytes total used
                27185573888 bytes free
                30293413888 bytes available
gmsncs/admin# patch install disk:defaultRepo/ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Local file not found
Anybody experience with this procedure.
Thank You
--- Update ---
Skipped Step 4 and followed Step 5 in the Quick Start Quide, however now I receive a diffrent error:
gmsncs/admin# dir disk:/defaultRepo
Directory of disk:/defaultRepo
926193986 Sep 26 2012 17:48:12 GRDbackup-120926-1736.tar.gpg
508376482 Sep 13 2012 05:38:25 backup-20120913-0530.tar.gpg
853768584 Sep 20 2012 05:40:17 backup-20120920-0530.tar.gpg
     127019 Sep 26 2012 16:40:58 ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz
           Usage for disk: filesystem
                 2471309312 bytes total used
                26258468864 bytes free
                30293413888 bytes available
gmncs/admin# patch install GRDbackup-120926-1736.tar.gpg defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
gmsncs/admin#

Hi, Thank you again for your help, but I am still stuck. I have gathered the outputs from ncs start and a ncs status afterwards. Currently I am not able to access the web-UI of NCS..
deberncs01/admin# ncs startStarting Network Control System...This may take a few minutes...Dependency Check Failed: Matlab is not running.Dependency Check Failed: Ftp is not running.Dependency Check Failed: Tftp is not running.Failure during Network Control System startup. Check launchout.log for details.startdeberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin#deberncs01/admin# ncs statHealth Monitor is running, with an error.failed to start NCS on startup Health MonitorReporting Server is StartingFtp Server is FailureDatabase server is stoppedTftp Server is runningMatlab Server is runningNMS Server is stopped.SAM Daemon is not running ...DA Daemon is not running ...Syslog Daemon is not running ...statusdeberncs01/admin#
Anyone got a clue on that? and where can I find that launchout.log on NCS? Thank you

Upgrade from Cisco Prime infrastructure verion 2.0 to 2.1

Request you all to please let me know if i have to install point patch before upgrading the cisco prime infrastructure 2.0 to 2.1.

After moving to 2.1, there is a 2.1.1 point patch currently available.
You should install that and the latest device package (4.0 as of this posting).
As always, the Release Notes are the best place to check the current available updates.

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

Can we upgrade IOS in WLC 5508 through CISCO prime?

I have CISCO prime 2.0 and CISCO WLC 5508 HA SSO pair.
I would like to upgrade the software code for the WLC HA pair.
Can I do through the CISCO prime ......
As per the link :http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-43571
1. After the WLCs are configured in the HA setup, the Standby WLC cannot be upgraded directly from the TFTP/FTP server.
Prime do the upgrade through FTP server , so will it be ok if we do the upgrade through it, for HA WLC.

Please check this link to upgrade wLC software in HA setup.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
Once the Primary WLC complete the upgrade , it will transfer the entire image to the Standby WLC via the Redundant Port.
Regards
Dont forget to rate helpful posts

Upgrading WCS 7 to Cisco Prime (CPI) 2

Hello,
I have read a few article and posts about upgrading WCS 7 to CPI 1.2 via NCS. However now with Prime 2.0 I was hopping I didn't have to use NCS.
I can't find any migration guides or documents about migrating to 2.0 instead of 1.x.
Can anyone point me in the right direction.

Direct migration from WCS 7.x to Cisco Prime Infrastructure 2.0 is NOT possible.
in my work I had this problem.
the only solution was to first install the NCS 1.1, after the patch 1.1.1.24 and then migrate to 2.0
Backup WCS data , upgrade to NCS 1.1 and restore de data...
install patch 1.1.1.24 , only then you can do the upgrade to version 2
CISCO:
"We strongly recommend upgrading your WCS to 7.0.230.0 (for data integrity) or higher before attempting to migrate to NCS.
Users will first need to do an intermediary migration to NCS 1.1.1.24, and then do an inline upgrade (or migration) to Cisco Prime Infrastructure 2.0"

Cisco Prime Collaboration Assurance Standard

Hi All,
We have recently deployed Cisco Prime Collaboration Assurance Standard Server. The issue that I am facing is that after some time the server collapses and logs me out, even though I can connect via the cli.
The version of prime we are using is : 10.5.1.53684.
I am attaching some logs that I got from the cli mostly related to apache.
Has someone faced this issue?
Thanks
Hassan

Hi Aman,
Thank you I will have a look at the bug. I was following the troubleshooting document and as compared to that document the service running when I do a sh application status cpcm are a lot less.
http://docwiki.cisco.com/wiki/Troubleshooting_Cisco_Prime_Collaboration#How_to_verify_the_Cisco_Prime_Collaboration_Assurance_installation_.28for_advanced_and_standard_modes.29.3F
STAT   PID USER     COMMAND             ELAPSED
===============================================
SNl   1119 root     emsam_perfmonen       12:50
S<l   1288 root     emsam_tomcat          12:39
SNl   1400 root     emsam_poller          12:16
SNl   1625 root     emsam_fault           11:56
S<l 32045 root     Decap_main            14:41
SN   32164 postgres postgres              14:40
SN   32274 primea   postmaster            14:29
SNl 32317 root     emsam_mq              14:12
SNl 32380 root     cpc_multiproclo       14:04
SNl 32414 root     emsam_inventory       14:04
Regards
Hassan

I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?

I tried to upgrade from XI Standard to Pro and it says I already have a more current version, but it's not Pro. What do I need to do to get Pro (installed, not the membership service)?

uninstall acrobat standard, clean and then install, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

How to upgrade from Acrobat 9 Standard to Pro Extended?

Can it be done in one step? It looks like I have to upgrade from Standard to Pro, and then from Pro to Pro Extended. Seems like a pain, but it does look like it costs $300 less than buying a full version of Pro Extended.
If this is what I have to do, do I have to actually download and install Pro, and then download and install Pro Extended on top of that?

Call the Adobe store for pricing: 800-585-0774. It is not available from the web.

Cisco Prime upgrade (Standard to Pro)

Similar Messages

Maybe you are looking for