Cisco Prime Version 1.4.1 and upgrading WLC SW version to 7.6.130.0

Dear All,
we have learned that Software Version 7.5.102.0 has been deferred by Cisco.
We now plan to upgrade our WiSM2 Controllers to Version 7.6.130.0 but have seen that a Pre-Requiste is that
our CPI must be running 1.4.1 or higher.
Question: We can't find Version 1.4.1 on the Cisco Download Site. We can only find CPI 1.4 update 1. Is that the same ?
And do you know why we should upgrade to Version 7.6.130.0 and not to Version 8.0.100 which had been released Prior to 7.6.130.0 ?
We would appreciate any hint.
Cheers,
Thorsten

Question: We can't find Version 1.4.1 on the Cisco Download Site. We can only find CPI 1.4 update 1. Is that the same ?
Yes, It is.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-4/release/notes/cpi_rn_141.html
And do you know why we should upgrade to Version 7.6.130.0 and not to Version 8.0.100 which had been released Prior to 7.6.130.0 ?
7.6.130.0 is 3rd maintenance release of 7.6. code. So it has lots of bug fixed since 7.6.100.0 released in last December. On the other hand 8.0.100.0 is the first release of 8.0 code & out there in just 2-3 months. So if your wirelesll environment is very critical, then stay 7.6.130.0 is advisable. Othewise jumping into 8.0.100.0 (or wait for 8.0MR1 to be release within few weeks) . Refer this for compatibility matrix for each version
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?

Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

Can I run the 64 bit version of Mountain Lion and the 32 bit version of windows 7 using parallels on the same computer

I purchased a Macbook Pro and it has the 64 bit version of Mountain Lion, I also downloaded Parallels desktop 7, and want to download Windows 7. I need to know if I can use the 32 bit version of wodnws 7 and the 64 bit version of Mountain Lion at the same time on the same computer.

here's the 32 bit installer, 2014 release of Photoshop CC: Separate 32-bit/64-bit installation
Return, cancel, or exchange an Adobe order

Cisco Prime infrastructure Change severity Switches and hubs - link down alarm

Hi, I want to change the severity of the link down alarm in the Cisco Prime Infrastructure 1.3, but in the menu Administration -> System Settings -> Severity Configuration i can not find the alarm. Some body knows where is it? o where i can change the severity of that alarm?
Thanks in advanced.

Hi Rollin and Daniel,
the first test i did changing the severity was with a new installation, with no devices added and it worked, when i did it in a Prime infrastructure with devices added it didn´t work, well, for this Prime with devices i upgraded it with the patch for 1.3 version and now it works too, the alarms is ok as the alarm severity, this is the link for the patch:
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272933&release=1.3.0&relind=AVAILABLE&rellifecycle=&reltype=all
i hope this helps,
Regards,
Milton Tizoc.

Cisco Prime Collaboration Deployment with BE7K and VMWare license

Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster. From what I have read there is a API problem with the VMWare license that comes with the BE7K. But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
UCSS-U-VMW-FND-5-1
UCSS Cisco UC Virt. Foundation Five Year - 1 server
Has anybody out there had expericne with PCD and BE7K'?
This is from release notes of PCD
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
Search for “Business Edition 7000” and it will state it is not supported with PCD. It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
“Virtualization Software License Compatibility
Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
The following are compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
Evaluation mode license
The following are not compatible with Cisco Prime Collaboration Deployment:
Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
VMware vSphere Hypervisor Edition
Any help would be appreacted.
JP

Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration. We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
Cheers,

When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

We are running Prime Infrastructure 1.3 primarily for wireless management at this point. We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out. While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features. For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers. I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment. Does anyone know when it's officially being released? Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are? I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management. Any useful information or links would be appreciated.
Thanks,
Christian

PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
For what does it have for customers?
> As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
-Thanks

I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Cisco Prime - extract list of hostnames and their serial numbers.

Hi all,
is there a way of extracting a list of hostnames ( for devices in EMEA ) and their associated serial numbers from Cisco Prime and into say a csv file?
Many thanks,
Paul

Hi Paul,
if you have Prime Infrastructure then run the below report :
Report > Report Launch Pad > Device > Detailed Hardware > Detailed Hardware Report Details
If Prime LMS then :
Reports > Inventory > Detailed Device
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Hi all,
I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
please advice what may be the issue ?

Hi,
does anyone happen to know if that problem is fixed? My currently setup looks like this:
1. Cisco Prime Infrastructure 2.1 with updated device pack.
2. Assurance license
3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
regards
Maurus

Have IPhoto 5.0.4 ;warning says quit and UPgrade to earlier version!!

After sucessfully downloading todays new photos and seeing that my complete library was available, I attempted to send emails of four of them; got interminaable spinning ball; would not accept command quit, force quit so had to shut down. Can not re-open I Photo: get "loading"... interrupted by following: " The photo library was created with an unreleased version of IPhoto. Please quit and upgrade this library by opening it in IPhoto 2 or IPhoto 4."
Of course I can not UPgrade to an earlier version and I do not know what to make of the 'unreleased' bit, since my 5.0.4 version came with this brand new IBook. I have tried to download 5.0.4 again but result is same.
These pictures on this library include the last shots of my close companion taken just before death last Thurday, Dec. 22. Please, please help me. Bill
IBook Mac OS X (10.4.3) 1.42 GHz Power PC -1.5 GB DDR SDRAM

Hi makuakane,
So far I have not seen any solution for that error message in these discussions. If you have a recent backup of your iPhoto Library folder then take the old library out of the Pictures folder and put your backup library in there (I suggest you backup the backup before you do this) Launch iPhoto and hopefully everything will be back to normal. If you don't have a backup then...
The only thing I can tell you to do right now is to create a new library and import/add to the library to reimport your images.
these are the steps:
Close iPhoto
Drag the iPhoto Library folder to the desktop
Launch iPhoto
In the next window that opens choose to create a new library.
When the new empty library opens go to File/add to library
In the next window navigate to the library on your desktop, highlight it in the window and hit the "open" button.
Your images will be imported in nice dated rolls. (make sure your view is set to sort by rolls to see it) There are a couple of caveats to this. You will get rolls named "Originals" These rolls will contain your video clips and your original images that you had edited. If you had RAW files they would be in those rolls too (I don't do RAW, so I don't know for sure) Delete what you don't want from those rolls. You will also get the jpeg pointer files to your video clips imported. They will just be jpegs and will not point to the video clips anymore as iPhoto made new ones when the clips were imported again. You can delete those. they should be in a roll right next to the newly imported video clips so they are not hard to find. The thumbnail files don't get imported as iPhoto makes new ones when the images are imported.
You will have to redo your albums, keywords, etc.
Good luck!
Lori

VCS registered endpoints not displayed in Cisco Prime Collaboration 10.5 Assurance and Analytics

Hi,
We have been able to successfully add VCS in Prime Collaboration Assurance and Analytics 10.5 however the endpoints registered with VCS are not displayed in the list of devices. Though, we have been able to add a video codec manually which originally is registered with VCS.
Thanks in advance
Kunal

Hi F,
After investigation this issue, we came to know that this is due to the use of 4096 bit ssl certificate by the VCS.
This is currently not supported by Prime Collaboration 10.5.1 and will be fixed in release 10.6 (available beginning of December).
In the mean time you will be able to discover the VCS is you change the default VCS certificate to match the types that are supported by Prime Collaboration.
Regards,
Kunal

Cisco AIR-LAP1041N-E-K9 not working with WLC 4402 version 7.0.116.0

Hi All,
appreciate your support for a problem i started facing today. i have a Cisco WLC 4402 running version 7.0.116.0 and it is working great with 25 Cisco 1252 APs. we have recieved a new 20 Cisco 1041N APs today and i installed one in our site but it doesn't work. it worked fine and loaded the image from flash and got the WLC ip address through DHCP option and started showing the below error:
*Mar 1 00:00:10.021: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.033: *** CRASH_LOG = YES
*Mar 1 00:00:10.333: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: C8:9C:1D:53:57:5E
*Mar 1 00:00:11.373: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:11.465: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1088 messages)
*Mar 1 00:00:11.494: status of voice_diag_test from WLC is false
*Mar 1 00:00:12.526: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.594: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.647: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 13-Apr-11 12:50 by prod_rel_team
*Mar 1 00:00:13.647: %SNMP-5-COLDSTART: SNMP agent on host APc89c.1d53.575e is undergoing a cold start
*Mar 1 00:08:59.062: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:08:59.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:08:59.837: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:09:00.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:09:09.136: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e
*Mar 1 00:09:17.912: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Mar 1 00:09:17.912: status of voice_diag_test from WLC is false
*Mar 1 00:09:17.984: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:09:19.865: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:09:19.886: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:09:20.874: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
Translating "CISCO-CAPWAP-CONTROLLER.atheertele.com"...domain server (172.16.40.240)
*Mar 1 00:09:29.029: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.100.102 obtained through DHCP
*May 25 08:27:02.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:02.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:03.175: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:03.177: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:03.177: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:03.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:03.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:03.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:03.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:03.448: status of voice_diag_test from WLC is false
*May 25 08:27:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:14.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:15.185: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:15.186: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:15.186: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:15.330: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:15.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:15.334: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:15.334: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:15.450: status of voice_diag_test from WLC is false
*May 25 08:27:26.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:26.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:27.182: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:27.183: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:27.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:27.329: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:27.333: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:27.333: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:27.333: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:27.433: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:27.446: %PARSER-4-BADCFG: Unexpected end of configuration file.
*May 25 08:27:27.447: status of voice_diag_test from WLC is false
*May 25 08:27:27.448: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*May 25 08:27:27.456: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*May 25 08:27:38.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:38.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:39.183: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:39.184: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:39.184: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:39.326: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:39.329: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:39.329: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:39.330: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:39.446: status of voice_diag_test from WLC is false
*May 25 08:27:49.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:49.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*May 25 08:27:50.179: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.100.101 peer_port: 5246
*May 25 08:27:50.180: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.100.101
*May 25 08:27:50.180: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*May 25 08:27:50.323: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*May 25 08:27:50.326: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.100.101
*May 25 08:27:50.326: %DTLS-5-PEER_DISCONNECT: Peer 172.16.100.101 has closed connection.
*May 25 08:27:50.326: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.16.100.101:5246
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*May 25 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio
*May 25 08:27:50.425: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*May 25 08:27:50.438: %PARSER-4-BADCFG: Unexpected end of configuration file.
i searched for the regulatory domains difference between AIR-LAP1041N-E-K9 and AIR-LAP1041N-A-K9 and didn't find any difference that may affect the operation of this AP.
just to mention that our configuration in WLC for regulatory domains is:
Configured Country Code(s) AR
Regulatory Domain 802.11a: -A
802.11bg: -A
My question is, should i only include my country in the WLC (IQ) to add the requlatry domain (-E) to solve this problem? or changing the country will affect the operation of all working APs??
Appreciate your kind support,
Wisam Q.

Hi Ramon,
thank you for the reply but as shown in the below link:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7.0.html#wp233793
the WLC in version 7.0.116.0 supports Cisco 1040 seiries APs.
Thanks,
Wisam Q.

I have downloaded and updated to version 6.0.2, and this is what version it says I have in the help tab. But on the addon page it wont let me download latest themes ect as it says my version wont work with that.

Said it all above. It tells me I have the latest version in the help tab under About Firefox. I have upgrade like 4 times now I even unistalled firefox and reinstaled the latest version But no change It still says i am out of date. like I said above on the addon pages I cant get what i want as it says I still have version 3.6 Help please I love firefox and hate IE but it works way better at the moment

Reset your User Agent. See the following articles:
*[https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Websites or add-ons incorrectly report incompatible browser-Reset your user agent]
*What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
Does not relate to your question, but...
You have multiple old Java Console extensions that Java did not clean-up during updates. You need Java Console only if you do Java programming/development or debug Java applets on web pages. You can see them in Add-ons > Extensions, '''''but you can not remove them from there'''''. Removing them will not affect the functioning of Java on websites. You can '''''manually''''' remove them, '''''if you do not do Java development work''''' to avoid future, possible problems/conflicts:
*http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
Your old Java Console extensions:
*Java Console 6.0.13 {CAFEEFAC-0016-0000-0013-ABCDEFFEDCBA}
*Java Console 6.0.14 {CAFEEFAC-0016-0000-0014-ABCDEFFEDCBA}
*Java Console 6.0.15 {CAFEEFAC-0016-0000-0015-ABCDEFFEDCBA}
*Java Console 6.0.17 {CAFEEFAC-0016-0000-0017-ABCDEFFEDCBA}
*Java Console 6.0.19 {CAFEEFAC-0016-0000-0019-ABCDEFFEDCBA}
*Java Console 6.0.20 {CAFEEFAC-0016-0000-0020-ABCDEFFEDCBA}
*Java Console 6.0.21 {CAFEEFAC-0016-0000-0021-ABCDEFFEDCBA}
*Java Console 6.0.22 {CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
*Java Console 6.0.23 {CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
*Java Console 6.0.24 {CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}

Firefox shows an old version of a website and not the updated version

I have changed a Flash video on my website but FF still shows the old video. I looked at the source code and it is for the new version. In IE, I see the new version. I have cleared the history and cache on FF, but still see the old movie. I am using FF 4.0.1
The link to the video is:
http://www.intrinsiccaptures.com/gallery.html

The page source show a different src (intrinsic%20captures.swf) for Firefox in the embed then IE see in the object param movie (intrinsic.swf)<br />
So you need to change that and make both SWF links the same.
<pre><nowiki><object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
width="800" height="630" id="tech" align="middle">
<param name="movie" value="intrinsic.swf" />
<embed src="intrinsic%20captures.swf" quality="high" width="800" height="630"
name="tech" align="middle" allowscriptaccess="sameDomain" type=
"application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
</object></nowiki></pre>

Cisco Prime Version 1.4.1 and upgrading WLC SW version to 7.6.130.0

Similar Messages

Maybe you are looking for