Cisco Prime with two IPs

Hi.
I have installed Cisco Prime in machine virtual, i need that Cisco Prime have 2 network card with 2 IPs differents subnet. Is it possible?.
Thank.
Francisco.

See:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml

Similar Messages

  • Cisco 4510E with two supervisor 8 problem

    dear all
    today we received new switch 4510r+E with two supervisors redundant .
    my problem Is when I start the switch it is working fine for 10 mins after that it is stop forward data .
    I try to force switchover to standby supervisor it is back to work for 10 minutes again after that stopped again .
    any ideas

    This is the only thing we found. we are trying it out tonight
    https://supportforums.cisco.com/discussion/12162221/catalyst-4506-e-sup-8e-arp-issues-any-vlan?referring_site=bss&channel=bdp

  • Accessing same computer with two IPs without changing configuration in ARD

    Hi,
    This is probably a simple question but I cannot find a way to do it. I want to access a computer from both places: inside my home LAN and from internet. Obviously IP addresses will be different.
    I know my internal IP address which has been fixed by me. I know my router external IP address, and I have configured the router for doing NAT over my computer for Remote Desktop ports ( 3283 and 5900 ) also, this IP address has a DNS name assigned to simplify things.
    The setup works fine from both places but my question is how to setup the computer in Remote Desktop to avoid changing by hand the IP addresses every time I change my location: home or office.
    Regards,
    Joan

    Hello,
    thank you very much for your answers.
    For the rollback, I will reimport the original/default keys for all the image types, this should be ok.
    Here are the problems I have trying to pu Microsoft Office Picture Manager as default picture viewer (I just want  .bmp, .jpg ... files to be opened with Microsoft Office Picture Manager by default).
    1 Using new file type under Computer Configuration\Preferences\Control Panel Settings\folder options. : I define a new file type (BMP for example), associated class Bitmap Image, I configure the icon (imageres.dll,65) and an open action where OIS.EXE
    is the application used to perform the action.
    Result : Icon is correct, file type is correct, image files are opened with OIS.EXE (correct) ... BUT now Microsoft Office 2010 appears twice in open or open with menu
    2 Using new open with under User configuration\Preferences\Control Panel Settings\Folder Options : new open with preference, action (update or replace same result), file extension BMP, associated program (path to OIS.EXE), i check set as default.
    Result : Office 2010 opens image files (correct) but icon is Office 2010 one and the file type is now 'OIS.EXE' for all image file extensions I have specified ... so it won't be possible to sort the file by image type if I select that method...
    3 Using ftype : OIS.EXE doesn't open the file when I double click on it but Microsoft Office 2010 appears twice in the open or open with list ...
    I am a bit lost ... what is the best method to put Microsoft Office Picture Manager as default picture viewer, keeping the image type (Bitmap image, JPEG image etc) and without having Microsoft Office 2010 twice in the open or open with list ??
    Last question : by default an image file is opened and previewed with Windows Photo viewer and edited with Paint. I would like just to open images with Office 2010 but keep Windows Photo viewer for preview and Paint for edit ... Is it possible ??
    Thank you in advance for any help and support !!

  • Cisco Prime 2.1 HA and NFS backup

    Hi,
    I've just configured my Cisco Prime with the external NFS backup server using instruction from the Administration Guide,
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#pgfId-1085464
    all works fine but I'm wondering what about HA server? Should I configure all the same steps I did on a primary server?
    Regards
    Gunter

    No, this instruction is for how to configure backup server and how to configure Cisco Prime to be able to use NFS for backup files. It works, I did this and there was no problem during the configuration. The only thing I'm wondering is that I did this on the primary Cisco Prime and not on the HA CP server. So what will hempen if the primary fail and the HA switch over as a primary? Should I configure the same repository on it, should I enable NFS on the HA server also?

  • Cisco Prime 2.1 Third Part Integration

    Does anybody already has integrated Cisco Prime with Third party system through Sockets or CORBA ?

    Those aren't supported methods. The REST API is the recommended method to integrate external tools. 

  • Cisco Prime NCS fail webpage

    Hello everyone
    im new here. but i have a question. its about the Cisco Prime ncs.
    i have installed the Cisco Prime with a ova file on a VM-ware server.
    i have configured the cisco prime with the setup at the beginning. but the problem is that i can't get the
    webpage to work. when i go to the https://ip-address. when i try to login with my admin user at the webpage
    it say's that it is a invalid username and password.
    wat must i do to be able to login to the webpage. is there like a different user for this..?
    thank.

    Hi
    We're experiencing the same problem. But are you sure of the way that you resolved the issue?
    We have both NCS and NCS (WAN) 1.1.
    NCS-VA-1.1.0.58.ova is the installer for NCS
    NCS-WAN-VA-1.1.0.1114-small.ova is the installer for NCS WAN 1.1
    We cannot logon to the NCS WAN using the root login/password. I have already tried configuring again the root password but error occurs.Until now we cannot logon to NCS WAN.
    Any recommendations on this?

  • Cisco Prime 2.1 problem with API/Client

    Hi,
    im having a problem with the API output i get from Cisco Prime Infrastructure. The URL im trying to GET info from is:
    https://<URL>/webacs/api/v1/data/Clients
    The output shows that im missing data from a specific ID. Example:
    {"@url":"https:\/\/prime.lmv.lm.se\/webacs\/api\/v1\/data\/Clients\/1280389614","@type":"Clients","$":"1280389614"}
    Then i try to GET the info regarding this ID: https://<URL>/webacs/api/v1/data/Clients/1280389614
    {"errorDocument":{"httpResponseCode":500,"httpMethod":"GET","message":"No such entity as Clients \/ 1280389614.-PRS-101","id":"presentation.PRS-101","uriPath":"data\/Clients\/1280389614","queryParams":"{}"}}
    So something is wrong here, so when i add ".full=true" parameter i get the following error as it cannot show the client data:
    https://<URL>/webacs/api/v1/data/Clients.json?.full=true&.firstResult=1000&.maxResults=1000
    {"errorDocument":{"httpResponseCode":500,"httpMethod":"GET","message":"Exception while invoking valueOf method 'getEnum' of enumeration class 'class com.cisco.ncs.nbi.client.ClientProtocolEnum'; nested exception is org.hibernate.HibernateException: Exception while invoking valueOf method 'getEnum' of enumeration class 'class com.cisco.ncs.nbi.client.ClientProtocolEnum'","exception":"org.springframework.orm.hibernate3.HibernateSystemException: Exception while invoking valueOf method 'getEnum' of enumeration class 'class com.cisco.ncs.nbi.client.ClientProtocolEnum'; nested exception is org.hibernate.HibernateException: Exception while invoking valueOf method 'getEnum' of enumeration class 'class com.cisco.ncs.nbi.client.ClientProtocolEnum'","uriPath":"data\/Clients","queryParams":"{.full=[true], .firstResult=[1000], .maxResults=[1000]}"}}
    Any idea how to solve this issue, how can i find the client that is causing this problem? In my script im reading all the clients in the network to a third party application. But right now its hard to get this output in a smart way. It might be resolved in 2.2, but it feels like the data i corrupt in some way so i doubt that this error is related to the version?
    Best Regards // Mattias Andersson

    Hi,
    I have also run into this problem on two different Prime 2.1-systems when trying to get all Client-data available. I haven't figured out a way to fix it more than making small calls (.maxResults=100) then trying to pin-point and skip the ID giving the error. I've been using 2.2 for a while now but haven't tested the Client-API that much yet. I'll experiment some more on it and see if I can recreate the problem to see if it's related to the version.

  • Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

    Hi,
    Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime  NCS .
    We have PILMS42-1.5K-U license available with us.
    Rgds,
    Kamal

    One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
    The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
    Please refer to the ordering and licensing guide here.

  • Cisco Prime Infrastructure 2.2 clients and users IPs not detected

    Hi all,
    I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
    please advice what may be the issue ? 

    Hi,
    does anyone happen to know if that problem is fixed? My currently setup looks like this:
    1. Cisco Prime Infrastructure 2.1 with updated device pack.
    2. Assurance license
    3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
    I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
    regards
    Maurus

  • Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)

    Hello,
    Does someone have issue with backup NCS via externally mounted location (NFS)?
    I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
    NCS/admin# backup ncs repository backup_nfs
    % Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
    INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
    You do not have enough disk space available in your repository to complete this backup.
    DB size is 25 GB
    Available size is 12 GB
    Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
      Stage 5 of 7: Building backup file ...
      -- complete.
      Stage 6 of 7: Encrypting backup file ...
      -- complete.
      Stage 7 of 7: Transferring backup file ...
      -- complete.
    I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
    NFS share works perfect. I have checked it via NFS repository:
    repository backup_nfs
      url nfs://server2008:/nfs
    +++++++++++++++++++++++++++++++++++++++
    NCS/admin# show repository backup_nfs
    NCS-130130-1135.tar.gpg
    NCS-130130-1137.tar.gpg
    NCS-130130-1157.tar.gpg
    NCS-130130-1158.tar.gpg
    test-130130-1210.tar.gz
    Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
    Does someone know how can I backup NCS system?
    Thank you

    How much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB.... 
    The backup-staging-url is just for a space used to stage the backup before it is written-----

  • Cisco Prime Collaboration Deployment with BE7K and VMWare license

    Hello, I am looking for some help trying to figure out if Cisco Prime Collaboration Deployment can be used to upgrade our existing 7.1.5 cluster.  From what I have read there is a API problem with the VMWare license that comes with the BE7K.  But after reviewing the BOM/quote from my VAR it lists the foundation license which based of the release notes is supported.
    UCSS-U-VMW-FND-5-1
    UCSS Cisco UC Virt. Foundation  Five Year - 1 server
    Has anybody out there had expericne with PCD and BE7K'?
    This is from release notes of PCD
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_010.html
    Search for “Business Edition 7000” and it will state it is not supported with PCD.  It is because the licenses that the BE 6k and 7K are shipped with don’t enable certain VMware APIs that PCD needs.
    “Virtualization Software License Compatibility
    Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some licenses do not enable required VMware APIs.
    The following are compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client)
    VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition
    Evaluation mode license
    The following are not compatible with Cisco Prime Collaboration Deployment:
    Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client)-preloaded on Cisco Business Edition 6000 and Business Edition 7000
    VMware vSphere Hypervisor Edition
    Any help would be appreacted.
    JP

    Thanks Jamie for repsonding, we haven't made any purchase's yet but I wanted to ensure we are purchasing a solution that won't lead to a lot of frustration.  We only have 1000 phones so we are pretty small and the BE7K seems to be a good fit and value.
    Cheers,

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Cisco Prime Infrastructure 1.2 with Cisco Prime Network Control System Hardware Appliance

    Hi Team,
    I have  following BOM
    Cisco Prime Infrastructure
    R-PI-1.2-K9
    Cisco Prime Infrastructure 1.2
    1
    R-PI-1.1-500-K9
    Prime Infrastructure 1.2 Software - 500 Device Base Lic
    1
    L-PILMS42-500
    Prime Infrastructure LMS 4.2 - 500 Device Base Lic
    1
    L-PINCS12-500
    Prime Infrastructure NCS 1.2 - 500 Device Base Lic
    1
    PRIME-NCS-APL-K9
    Cisco Prime Network Control System Hardware Appliance
    1
    PI-APL-IMAGE-1.2
    Cisco Prime Infrastructure 1.2 Appliance Software
    1
    Pls let me know if we have both NCS and LMS preinstalled with Cisco Prime Infrastructure 1.2 Appliance Software orwe need seperate appliance or server for LMS 4.2. 
    Regards

    Hi Scott,
    Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
    Can you pls check this.
    Regards

  • Cisco Prime Infrastructure 1.2 synchronizaton with active directory

    hi all
    I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
    note:
    I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
    how can I do this task ???
    thanks all.
    I appreciate your support.

    Hi Mohamed,
    Integration with AD is not supported in PI
    Thanks-
    Afroz
    [Do rate the useful post]

  • Cisco Prime Infrastructure 1.2 with SNMPv3

    Dears,
    I am trying to add a router on Cisco Prime Infrastructure 1.2 using snmpv3 (authpriv, sha & aes256). When i go to device work center and add a device, i cannot find the AES-256 in the privacy options. Only None, DES, and AES-128 are available.
    Is there any workarround?
    Please advise.
    Moustafa

    PI only supports SNMP privacy up through AES-128 at this time. Reference the guide section on adding an new SNMP credential entry.
    Additionally there is a bug with SNMP v3 support in PI 1.2. It should be resolved in PI 1.3.

Maybe you are looking for