Cisco Profile 55 H323 mode Off after restart

Hi All,
We have a Cisco Profile 55 that for some reason after a restart switchs H323 Mode to off after a restart.
Through the web interface if you browse to Configuration -> System Configuration -> Network services -> H323 Mode is the first setting.
I have set it to On and save it twice now but after a restart it has changed back to off!
Any idea's what would be causing this would be a great help.
Thanks
John

Hello John -
As Martin as mentioned above, when using CUCM, H323 isn't supported. Actually starting with TC7 as seen in the TC release notes, on pg 7, when registering an endpoint to CUCM, H323 becomes disabled.
Taking a look at the following TelePresence Admin Guide with CUCM, on pg 11, it mentions that when using a TelePresence endpoint registered to CUCM, the default call protocol is SIP, this is because CUCM is SIP only.
In order to make H323 calls, you'll need to rely on either a VCS-C/E or Expressway-C/E to do the SIP to H323 interworking as I don't believe CUCM can. Expressway is preferred when using CUCM.

Similar Messages

I was logged in with a temporary profile on my pc, after restarting everything seemed to be fine. But my iTunes music is all in the cloud now, and my playlists are gone. What do I do?

I was logged in with a temporary profile on my pc, after restarting everything seemed to be fine. But my iTunes music is all in the cloud now, and my playlists are gone. What do I do?
My iTunes media folder shows ALL of my music still there (including all from imported CD's), but on my iTunes, it says most of it is in the cloud? As well as my playlists that I have had for YEARS, are all gone. I just recently got a new laptop and had my iTunes transferred over, when I re-downloaded iTunes onto it, everything popped up perfectly from this same file. Now after this "Temporary Profile" mishap, nothing is working properly with iTunes.
Help! Please.

Do this. If all the synced media like apps and music are alread in the the iTnunes library just backup the iPod and restore from that backup
iOS: How to back up and restore your content
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Bluetooth OFF after restart / resume from sleep

Hi, i have problem with integrated Bluetooth in my T400s. If i start Windows from off state, BT is on and my BT mouse is connected correclty. But if i restart or go to sleep mode and back resume from sleep, BT stays OFF and i have to switch it on via Fn+F5. I tried to reinstall clean Windows 7 with all drivers through Lenovo System Update, but no solution. Does somebody have the same problem? Any idea?
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64
Solved!
Go to Solution.

Unbelivable, crazy things happens. You are right, problem is solved.
1 - 2 weeks ago i tried Ubuntu, not installed, just run from USB flash and look how new one looks like
2 - probably from that time integrated BT did not start after restart or resume from sleep - really strange (i have WWAn as well but i do not use it)
3 - i tried to disable I/O Access for all devices in BIOS and set back On - that did not help
4 - i have loaded default setting in BIOS by F9 and saved and after restart BINGO BT mobule works even after restart or after resume from Sleep.
It is really strange for me, but yeahh, crazy things happend.
Thanks.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

10.6: Internet Sharing turns off after restart

I use Internet Sharing on my iMac to share the Ethernet connection from my computer wirelessly to my iPod touch. In Leopard, Internet Sharing would turn off after a restart. Snow Leopard fixed the problem for a while, but now it's acting up again. Any help?

Using MacOS X 10.6.2 I have the same problem.
My network configuration is just the other way around (wireless Internet and Ethernet LAN).
Looking this up in Google first, I came across this older support link of Mac OS X 10.2:
http://support.apple.com/kb/TA21168?viewlocale=en_US
The solution provided there is not really helping though.
However, it appears that this is a recurring issue Apple is struggling already longer with. Hope they straighten that out at one point.

Airport turns off after restart. Any way to change this preference?

I recently upgraded to 10.4.4 from 10.3.9. Whenever I restart my computer the airport by default is switched off and i have to manually select the network i want to join. Its a small detail, but previously in 10.3.9 the airport would stay on if it was switched on prior to the restart. Is there any way to change this preference or is this just the way airport is set up in 10.4.4?

Try this:
http://discussions.apple.com/thread.jspa?messageID=607421&#607421

I've customized my Firefox in full screen mode by clicking on full screen option. Now I'm not getting it back in normal mode even after restarting firefox and even restarting my system. How could I get it back in normal display mode? Thanks !

not able to come back to normal view mode from full screen view mode....

yeah it worked.... Thanks... :)

Perspective zoom turns off after restart

hello i have iphone 5s 8.0.2 and ipadmini 8.0.2
everything worked just fine untill i have upgraded to 8.0 with OTA update option.
i Use perspective zoom for background on my lock screen and home screen.
but after i reboot my iphone or ipad the zoom for lock screen disables.
on the home screen perspective zoom remains ON. So after every reboot i have to open setting-wallpapers and turn perspective zoom on for lock screen.
the same thing on my iphone and ipad. I took my friends 5s and rebooted it - he doesnt have this bug.
i Hoped that 8.02 update would fix it, but it didnt
PS ipadmini lags SO much with 8.x update ((((((

Try this:
http://discussions.apple.com/thread.jspa?messageID=607421&#607421

Font profile doesn't work after updating to ios 7.1

Before updating to ios 7.1 I can see text written in unicode zawgyi font in applications by installing the font profile. But after 7.1, text written in zawgyi unicode font appears as ?????. Some said removing and reinstalling the profile may help but it doesn't. The font appeared for a while when I first opened the app just before the font profile is installed but after restarting the app it showed ????? again. Please help me fix this problem.

hi Mr.Sianpu
nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
thanks

Having to turn Protected mode off to view Microsoft webpages

I'm in the process of building a corporate image and I have just found out that if we go to these types of webpages
http://technet.microsoft.com/en-us/library/jj200580(EXCHG.150).aspx and Protected mode is turned on for Internet under security the active parts of the pages do not expand
or collapse (they stay static in their load arrangement). Turn Protected mode off and restart IE and they work.
I don't think it is only Protected Mode that has to be on but a combination of a couple of settings as I have another machine that doesn't do it with Protected Mode on.
The machines I have this fault with are 32 bit Windows 8.1 Enterprise
Does anyone else get this and know why it is happening as I would like to keep Protected Mode turned on but I can't if it produces this error.

would like to keep Protected Mode turned on but I can't if it produces this error.
Try putting that host name in the Trusted sites zone. That would have the effect of having Protected Mode on automatically when going to those pages but otherwise leaving it off for pages that were just in the Internet zone by default.
Robert Aldwinckle

Keeping "Lock Zoom Position" always enabled, also after restarting Lightroom?

I use "Lock Zoom Position" a lot in Lightroom. Unfortunately it gets switched off after restarting the program.
Is there a way to keep it enabled all the time? I would like to set and forget it and only in certain situations maybe turning it off.
I haven't found a way to enable it by default using the settings or so. :-(

I think the "Available Memory" figure is pretty standard for a 32bit system, which is what I think the OP is running.
@howmanyetc: A couple of observations: the systems specs would seem to be not much higher than the minimum requirements for LR4, so blazing fast it ain't ever going to be. Also is the J drive the new external drive that you bought? If so I'm guessing that it may be USB2 connected? If so having the catalog on a "relatively slow" external drive is probably not the best idea from a performance perspective. The "red lining" of the CPU during exports is entirely likely, the processor is simply not sufficiently powerful to do the work quickly. As a comparison, exports which take maybe 3-4 seconds on my desktop would take upwards of 30 seconds on my old Thinkpad laptop (similar specs to yours) with both cores at 100% with no deviation (and that was back in LR3, so I can't imagine how slow it would be using LR4). The "getting real slow" after a while is more than likely due to your RAM limitations, especially on a 32 bit system.
I'm not saying that you should rush out and buy a brand new powerful system, though I do think you might struggle to make significant improvements given your specs. It sounds as though you are doing everything you can to improve things, however as I said, if the catalog is on a USB2 external drive, trying it back on an internal drive would be the first place that I would start. Having the images on the external is probably OK, your bottleneck for things such as Exports is CPU, not I/O.
Do you need to be writing XMP for all your files? Do you have the "Auto write XMP" setting enabled? If so, turning that off and using Ctrl+S to manually write the XMP at the end of a session may help a little.
Sorry I can't be of more help.

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How do I get firewire to work with after restarting from transfer mode

Every time I use transfer mode to move files to and from Mac Pro using transfer (target) mode, the firewire will not connect to any device after restarting to normal operation. The hardware profile indicates no connection. It starts working again several hours after Shuting down for an hour or so

If you have an idea for a new Print App that you would like to see, please submit your suggestion at the below link:
https://h30495.www3.hp.com/idea/submit
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

When i try to wake my macbook after sleep the keypad lights up but the screen stays black. I have to switch off and restart. How do I fix this?

After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.

OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps.

I have an iPhone 4S with Sprint, I had to replace my last phone after the newest update killed my wifi button. Now my new phone won't get 3G at all. I have tried turning my phone off/on, resetting my networks, and turning airplane mode off and on.

I have an iPhone 4S with sprint. I had to replace my phone after the new update killed my wifi button and wouldn't let me turn my phone off. Since I've had my new phone, I haven't been getting 3G. I have tried resetting my networks, Turing airplane mode off/on and restarting my phone. Nothing seems to work. Any info on what I should do next would be great.

If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.

Cisco Profile 55 H323 mode Off after restart

Similar Messages

Maybe you are looking for