CISCO Projectsquare / spark, how to dial VCS

How do you use the new alternative Sparks to dial in to an sx20 of Expressway Server
I normally would use jabber movi to dial [email protected]
I am not seeing the option in spark to do so.

This is, as far as I know, not possible at this stage. Spark now has its own support forum which you can find here: https://communities.cisco.com/community/technology/collaboration/cisco_spark
/jens
Please rate replies and mark question(s) as "answered" if applicable.

Similar Messages

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

For Cisco SPA112: can I make dial plan that can use 6 digit number without having to dial the area code 00357 but not for 0030?

Cisco SPA112:
Can I make dial plan that can use 6 digit numbers without having to dial the area code 00357 but also being able to dial 0030xxxxxxxxxx numbers?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

I can use the Cisco TelePresence Server MSE 8710 without VCS or CUCM

Hi all,
We are planning install Cisco TelePresence Server MSE 8710 for our customer.
we haven´t install this equipment, then we need know if is possible install the Cisco TelePresence Server MSE 8710 standalone, like a MCU, without a CUCM or VCS.
Regards,
GSilva

It should be possible to reach the device via ip for sip and h323 without a call control,
but as the TPS does not have an IVR this might not work out for the typical IP dialing target group.
Even if its a bit outdated (seems not to be EOL though), the 8510 MCU can be an option as the stand alone IP support might be better.
If you want to move to the TPS 8710 later you can migrate it later as well, its the same hardware.
It would be interesting to hear how the current deployment and setup looks
like and what benefits you see on deploying it without CUCM or VCS and how your requirements / use case are.
This here seems to be a special case, for new setups I would recommend to use CUCM, Conductor and TPS.

Cisco ASA 5505: How to change the default OS

Hello,
I'm learning how to work on the Cisco ASA 5505. My machine has two OS images: the old 7. whatever image and a more recent 8.2 image. The 8.2 image is lower in the index on disk0 so whenever I reboot the machine, the start up points it towards the older image and I have to go into ROMMON to boot the newer OS. Could someone please guide me on how to change the position of the newer OS so that it's the default image? I'd like to do this without deleting the older image so that I can have a proof of concept.
Thank you!

Hi Colin,
You could use the 'boot system' global command to force the ASA to the pointed image file.
boot system flash:/image.bin
Sent from Cisco Technical Support iPhone App

How to dial automatically internet connection in firefox browser at browser startup as in internet explorer

i have ADSL modem broadband connection in which i have to connect to internet by establishing a connection by using following steps
control panel>network connection>create a new connection>connect to internet>set up my connection manually >connect using dial up modem OR connect using a braodband connection in which username and password required
creating this connection i have to provide username and password provided by ISP.
i have to dial internet connection manually after modem set local area connection automatically
i found a solution for internet explorer and by changing setting internet explorer start automatically dialling internet connection as i start the internet explorer.
is their in mozilla firefox an option to automatically dial internet connection as i open firefox browser?
and is their is any solution for as i start my computer internet connections established automatically without opening any browser , if such solution is available ,please tell about it.

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

How to dial phone # from calendar

I am very frustrated that I can't seem to dial a phone number I entered as an event in my calendar with just a tap. Yet, lo and behold, I go onto the Apple site and I see this:
"Using Multi-Touch on iPhone makes the Calendar application intuitive and simple to use. Tap to create and send out meeting invites, accept or decline a meeting invitation, or dial a phone number from meeting notes."
What does this mean? Where? I regularly set up the phone numbers of people I need to call in Calendar and, so far, I can do this on any phone but can't figure out how to do this from the iPhone. Is this feature only available in "meeting notes?" Where is that? Is it visible on your calendar? If it isn't, who cares?

thelaw wrote:
"Using Multi-Touch on iPhone makes the Calendar application intuitive and simple to use. Tap to create and send out meeting invites, accept or decline a meeting invitation, or dial a phone number from meeting notes."...Is this feature only available in "meeting notes?"
Yes, only in the Notes. Meaning, if you or whoever organized the meeting enters a phone number in the Notes field, you can tap the number to dial it. The field is only present if notes were entered - for example, you can enter notes when creating a new event on the iPhone; for Outlook invitations sent via Exchange, text entered into the 'body' of the calendar event are Notes. It +does not+ work for numbers entered the location field (which is how most of my invites are, unfortunately).
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

How to dial-up my ISP

I have a USrobotics 33.6 connected to my Comm port 2.
I would like to use it to call my ISP and configure my Netscape Communicator.
I come from the Windows world and I tend to measure everything in terms of windows...So pardon me if I ask how to setup my dial-up connection in Unix. I tried to use the Admintool and there are two ports, a & b. I figured it's b so I tried to modify b from terminal to modem, but that's about it. I don't know where to go from there.
Now what? How do I call my ISP and test whether the modem is actually working?
Please help?
Thanks in advance.
Yousef

I have follow your instruction to connect to my ISP as it shows the following message:
Serial connection established.
using interface sppp0
connect: sppp0 <--> /dev/ttya
local IP address xxxxxxxx
remote IP address 1.1.1.1
But when I ping www.sun.com, it shows:
www.sun.com unknown.
I start Mozilla and it said www.sun.com not found etc...
What has gone wrong?
Do I have to configure some files such as:
/etc/resolv.conf
/etc/hosts
/etc/hostname ?
or any other steps that can help me to connect to the internet?
Thanks...

How to dial telephone numbers which have letters instead of digits?

I'm new to Blackberry products & just bought a 8330 curve. Unlike my other smartphones which had the option of a dial key pad, the Curve appears to have forgotten to include one. When a telephone number is spelled out with letters instead of digits, how do I dial it? For example: for my pharmacy refills I would dial 1-123-345-DRUG or when calling a company after hours and reach its automated answer system which prompts you to key-in the party that you are looking for their last 4 letters of their name. How do you do it. Help.

Hi and welcome to the forums!
You can enter the alpha chacratars using the alt shift for nummerics.
For example: 1-800-(alt-shift) -IFlYSWA
The same applys when you are asked for alpha characters as in your example
of search by person's name.
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Message Edited by Bifocals on 11-24-2008 06:45 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cisco Aironet 1250 - How to bridge two AP's and get Non-root to talk to Root AP

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:Arial;
mso-bidi-theme-font:minor-bidi;}
      I have two buidlings acroos the street from each other. I have two Cisco Aironet 1250 wireless AP's with the first one going in the main building with network backbone. The Second AP goes across the street with the other wired network segment. Both AP's have long range antenas 2.4 GHZ on top of each building. I have configured the 1st one as the Root Bridge. The one across the street is configured as non-root bridge. I have both AP's configured with the same WEP key and also with the same SSID name with both set to broadcast it.   I am still unsure and confused as to how I get the non-root bridge to talk to and use the root bridge to get on the main network.
        1- It’s main to use the Root parent Mac address.
        2- Is there another config that I am missing to get the signal?
Note: I still not getting any signal from the root although distance between root and non-root is 330m
My root antenna is AIR-ANT24120 and non-root antenna is AIR-ANT1949 and attached files is my configuration files
Thank you.

1. How are the AIR-ANT24120 and the AIR-ANT1949 installed?
the AIR-ANT24120 is connected virtically on tower far 11m from the earth and AIR-ANT1949 is connected horizontally on tower far 10m from the earth
2. What is the distance between both APs?
350 m
3. Do you have clear line-of-sight between the two?
there is one tanker in the middle between them but it's far 7m from the earth
4. Is the two APs properly aligned?
i think yes and changed the aligned many times without any news (I don't have any tools for alignment)
5. Which point are the antennas connected to? Primary, Secondary or middle?
I tried in the primary and secondary but never tried the middle antenna
Thanks

Cisco Prime LMS / how to create MyDashboard

Hi everybody,
i want to create my own Dashboard. But when i do this i have no choise in the dropdown menu to do this. ('copy dashboard' is empty)
When i click the created dashboard, the site is empty.
Do anyone know how to integrate a portlet to my own profile?
Thanks in advance.
Kind Regards
Georg
Cisco Prime
LAN Management Solution
Version 4.2.2

The standard way to do this is by creating a new guest user template and choosing 'Import from file'. Every line of this file (.csv) may be identical, except for the username.
Of course, you must enter the usernames by hand. If you're looking for a way to generate usernames like companyNNNN automatically, you should use some form of scripting.

Is it possible to use Cisco 1721 AUX port to dial into MS-RAS?

Is it possible to use Cisco 1721 AUX port with external modem to dial into Microsoft W2k-RAS server?

Hello Thanks for the link. The place where I'm stuck is when the async is going through the LCP negotiation. the LCP Confreg sends but I dont' get back anything. Cisco documentation states "make sure autoselect PPP or Async mode dedicated are set but I'm actually dialing into a Microsoft RAS server. Do you know where these settings are?
*Mar 1 05:38:04.782: As65 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 05:38:04.782: As65 PPP: No remote authentication for call-out
*Mar 1 05:38:04.782: As65 LCP: O CONFREQ [Closed] id 43 len 20
*Mar 1 05:38:04.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:04.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:04.786: As65 LCP: PFC (0x0702)
*Mar 1 05:38:04.786: As65 LCP: ACFC (0x0802)
*Mar 1 05:38:06.782: As65 LCP: TIMEout: State REQsent
*Mar 1 05:38:06.782: As65 LCP: O CONFREQ [REQsent] id 44 len 20
*Mar 1 05:38:06.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:06.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:06.782: As65 LCP: PFC (0x0702)
*Mar 1 05:38:06.782: As65 LCP: ACFC (0x0802)
*Mar 1 05:38:08.782: As65 LCP: TIMEout: State REQsent
*Mar 1 05:38:08.782: As65 LCP: O CONFREQ [REQsent] id 45 len 20
*Mar 1 05:38:08.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:08.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:08.782: As65 LCP: PFC (0x0702)
*Mar 1 05:38:08.782: As65 LCP: ACFC (0x0802)

How to dial a #

I need to modify a called number in a route or translation pattern to send the dtmf tone of # and then pause for 3 sec, any thoughts.

use a comma where you want the pause to happen. 1 comma equals 1 second, 3 commas ,,, 3 seconds.
For example 9,,,222. the router will dial 9 wait 3 seconds then dial 222.
Here is a good link, look under configuring dial peers.
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a0080080aec.html
Hope this helps.
Curt

How to dial-up

i would like to know " how can i make dial-up connect for inter-net through solaris.

You can use PPP-3.01 Solaris 8 for dial-up ppp connection. This message is sent by PPP-301.
First , download PPP-301.shar from Sun/Bigadmin/Software/Sunsoftware/SolarisAdminpack>
Download>signon>login .use your loginname and passwd
same as this page you login. "Solistice PPP 301 " is what you need. You need manual from ftp://192.18.99.138/802-5354.pdf Good luck!

How to dial a telphone number thru forms6.0

Dear All,
1. I want to dial a telephone number (thru a modem attached to my PC) thru an event in forms6.0. I am using personnal oracle.
2. How to identify my modem in which port (COM1 or COM2...) thru forms6.0 using backend as Personnal Oracle.
Regards
Shaju John Joseph

YOu will need some phone dialing software which you would interface to Forms vis ORA_FFI or using the Java Importer. The ability to dial a phone is not native to Forms.
Regards
Grant Ronald
Forms Product Management

CISCO Projectsquare / spark, how to dial VCS

Similar Messages

Maybe you are looking for