Cisco Provisioning Manager 2.1 bulk service area detailed configuring
Hi folks,
I'm really stuck and need some help desperately.
I have bought Cisco Provisioning Manager 2.1 for 5000 handsets and I have isntalled the product ok however I am now at the stage where I need to configure the service areas. I have some 45 sites which equates to about 350 service areas.
Service Area for each site with the following differences:
- Odd Device, Present CLI
- Even Device, Present CLI
- Odd Device, Restrict CLI
- Even Device, Restrict CLI
Can someone please advise me a way to bulk configure these detailed attributes with some tool or a let me know of a customer northbound API application that has been written to do make this painful exercise much less painful?
I estimate its going to take me 5 weeks full time to click through each thing and configure it..
Please help!
Cheers
Beau
You can bulk load (with batch provisioning) the Service Areas... I did this by exporting my phones into a CSV file from Communications Manager, and then filtered it for the fields required for the SAs. Then you just follow the instructions for batch provisioning that start here: http://www.cisco.com/en/US/customer/docs/net_mgmt/cisco_unified_provisioning_manager/2.1/user/guide/infrstct.html#wp1051558
I hope that helps...
--Joe
Similar Messages
-
Cisco VPN connects but then no services are available.
Where to start:
I have a situation where by my remote office, 5 machines, connects to head office via Cisco VPN client.
Recently we have been able to make a vpn connection but once connected we have no services available like connecting to servers, internet, network drives, voip phone or even pinging any of the services. We get an IP address on the virtual network adaptor created by vpn connection but then nothing.
After a hec of amount of troubleshooting I swapped out our router, Draytek Vigor 2820, for another 2820. Same problem. I then took my Draytek Vigor from home, that does work, to the office and it works perfectly fine using the 2600 router in the office. I then tried a dlink router and that worked in office as well. So it has something to do with the 2820 router. It has been working fine for months and now recently, having changed nothing on it, it has stopped working for us with Cisco vpn connection. Does anyone have any clues as to why and what I could do on the router to resolve issue or could it be something on the cisco side that needs changing? I have already updated firmware to latest version on router.
Any help / advice would be great appreciated.
Regards,
AshleyCan you please share the configuration as there might be something that change after the upgrade that might cause the issue.
-
Cisco call manager Network Failover Configuration
Hi all,
I have a cisco call manager 6.0.
The server is configured and is functioning very well.
Only today I realized that the server MCS has two NIC and there is the possibility to configure a networ failover by cli interface.
Now the question are:
is it possible to configure this function now without problem?
if yes what are the ordered steps to follow?
Thanks all.Hi
you can use EtherChannel, 2 phisical ports as 1 logical -
Cisco Call Manager / Translation Patterns
We have a Cisco Call Manager in a large metro area with 10 digit dialing.
The problem is some of the numbers we dial in the digit still require a 1 because they are technically long distance.
Currently I have to add multiple rules to either add a 1 or not depending on the exchange. If the user adds a 1 when they don't need it they will get a "you don't need to dial a 1 with this number". If they don't add a 1 when they need it they get a "you must dial a 1 with this number"
I'm sure there is an easier way to do this especially because I only need to dial 10 digits on my cell phone no matter what.
thanks,There is no quick solution short of build specific route patterns based on exchange dialed when you have same area code requiring 10 or 11 digit dialing, this comes down to training and having users try both and having both 1[2-9]XX[2-9]XXXXXX and [2-9]XX[2-9]XXXXXX patterns defined.
-
Cisco FireSIGHT Management Center
Dear All,
I would like to ask that, is it mandatory to have Cisco FireSIGHT management Center OR Sourcefire Defence Center to configure and manage Cisco FirePOWER/ Sourcefire IPS appliances ?
Thanks & RegardsAdding to what adhogan mentioned - yes - except for the new ASA 5506 which, when used with ASDM 7.4, will allow ASDM-based setup.
Most use cases would still want to have an FMC though for always-on monitoring and archiving the data for retrospective analysis.
You do have the option of the small licenses that allow you to manage either 2 or 10 ASA module-based sensors. (FS-VMW-2-SW-K9 or FS-VMW-10-SW-K9)
For legacy Sourcefire 3D sensors (VMs or appliances) you need the full FMC/DC option. -
Fabric Interconnect B, management services are unresponsive
Hi,
We have configured Call Home option in UCSM and we are getting below error from Call Home option since last Saturday. We have open TAC with Cisco to troubleshoot this error but as per TAC "The error is a transient error from which the fabric interconnects can automatically recover."
Below is the error messages we are getting
E-mail-1:
Subject:
System Notification from System-A - diagnostic:GOLD-major - 2011-12-27 17:54:09 GMT-00:00 Fabric Interconnect B, management services are unresponsive
Body Message:
System Name:System-A
Time of Event:2011-12-27 17:54:09 GMT-00:00
Event Description:Fabric Interconnect B, management services are unresponsive
Severity Level:6
E-mail-2:
Subject:
System Notification from System-A - diagnostic:GOLD-major - 2011-12-27 17:54:09 GMT-00:00 Fabric Interconnect B, management services are unresponsive
Body Message:
<?xml version="1.0" encoding="UTF-8" ?>
<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
<soap-env:Header>
<aml-session:Session xmlns:aml-session="http://www.cisco.com/2004/01/aml-session" soap-env:mustUnderstand="true" soap-env:role="http://www.w3.org/2003/05/soap-envelope/role/next">
<aml-session:To>http://tools.cisco.com/neddce/services/DDCEService</aml-session:To>
<aml-session:Path>
<aml-session:Via>http://www.cisco.com/appliance/uri</aml-session:Via>
</aml-session:Path>
<aml-session:From>http://www.cisco.com/appliance/uri</aml-session:From>
<aml-session:MessageId>1058:SSI1442BFRC:4EFA0641</aml-session:MessageId>
</aml-session:Session>
</soap-env:Header>
<soap-env:Body>
<aml-block:Block xmlns:aml-block="http://www.cisco.com/2004/01/aml-block">
<aml-block:Header>
<aml-block:Type>http://www.cisco.com/2005/05/callhome/diagnostic</aml-block:Type>
<aml-block:CreationDate>2011-12-27 17:54:09 GMT-00:00</aml-block:CreationDate>
<aml-block:Builder>
<aml-block:Name>UCS 6100 Series Fabric Interconnect</aml-block:Name>
<aml-block:Version>4.2(1)N1(1.43q)</aml-block:Version>
</aml-block:Builder>
<aml-block:BlockGroup>
<aml-block:GroupId>1059:Serial Number:4EFA0641</aml-block:GroupId>
<aml-block:Number>0</aml-block:Number>
<aml-block:IsLast>true</aml-block:IsLast>
<aml-block:IsPrimary>true</aml-block:IsPrimary>
<aml-block:WaitForPrimary>false</aml-block:WaitForPrimary>
</aml-block:BlockGroup>
<aml-block:Severity>6</aml-block:Severity>
</aml-block:Header>
<aml-block:Content>
<ch:CallHome xmlns:ch="http://www.cisco.com/2005/05/callhome" version="1.0">
<ch:EventTime>2011-12-27 17:54:09 GMT-00:00</ch:EventTime>
<ch:MessageDescription>Fabric Interconnect B, management services are unresponsive</ch:MessageDescription>
<ch:Event>
<ch:Type>diagnostic</ch:Type>
<ch:SubType>GOLD-major</ch:SubType>
<ch:Brand>Cisco</ch:Brand>
<ch:Series>UCS 6100 Series Fabric Interconnect</ch:Series>
</ch:Event>
<ch:CustomerData>
<ch:UserData>
<ch:Email>[email protected]</ch:Email>
</ch:UserData>
<ch:ContractData>
<ch:CustomerId>[email protected]</ch:CustomerId>
<ch:ContractId>ContractID</ch:ContractId>
<ch:DeviceId>N10-S6100@C@SSI1442BFRC</ch:DeviceId>
</ch:ContractData>
<ch:SystemInfo>
<ch:Name>System-A</ch:Name>
<ch:Contact>Name</ch:Contact>
<ch:ContactEmail>[email protected]</ch:ContactEmail>
<ch:ContactPhoneNumber>+00-0000000000</ch:ContactPhoneNumber>
<ch:StreetAddress>Office Address</ch:StreetAddress>
</ch:SystemInfo>
</ch:CustomerData>
<ch:Device>
<rme:Chassis xmlns:rme="http://www.cisco.com/rme/4.0">
<rme:Model>N10-S6100</rme:Model>
<rme:HardwareVersion>0.0</rme:HardwareVersion>
<rme:SerialNumber>SerialNumber</rme:SerialNumber>
</rme:Chassis>
</ch:Device>
</ch:CallHome>
</aml-block:Content>
<aml-block:Attachments>
<aml-block:Attachment type="inline">
<aml-block:Name>sam_content_file</aml-block:Name>
<aml-block:Data encoding="plain">
<![CDATA[
<faultInst
ack="no"
cause="management-services-unresponsive"
changeSet=""
code="F0452"
created="2011-12-27T23:24:09.681"
descr="Fabric Interconnect B, management services are unresponsive"
dn="sys/mgmt-entity-B/fault-F0452"
highestSeverity="critical"
id="2036245"
lastTransition="2011-12-27T23:24:09.681"
lc=""
occur="1"
origSeverity="critical"
prevSeverity="critical"
rule="mgmt-entity-management-services-unresponsive"
severity="critical"
status="created"
tags=""
type="management"/>]]>
</aml-block:Data>
</aml-block:Attachment>
</aml-block:Attachments>
</aml-block:Block>
</soap-env:Body>
</soap-env:Envelope>
We want to understand that what is the impact of this error and is there anything that we can do to prevent this error? Also want to know what might be the cause get this error?
Let me know if anything else is needed from my side
show-tech file uploaded.Padma,
TAC Engineer sent below mail
Hi Amit,
I’ve checked through the show tech you’ve uploaded and have not found any indicators of errors for the error message you are seeing.
As I mentioned in the call, the error is a transient error from which the fabric interconnects can automatically recover from. The recommended action is to wait for a few (10-15min) to see if the error clears automatically. If the error does not clear then we will need to do further troubleshooting. This error on its own is not a cause for worry. As you have HA in your system the management services would have failed over the to the other fabric interconnect and would not affect your system performance.
We can leave the system under observation for a few days to see if other errors occur concurrently with this error.
I will upload show-tech logs here, find my reply below
Is the alert generated only for FI B or both FIs ->> Amit: Alert generated for FI-B only
Any change in cluster state corresponding to alert time stamp ->> Amit: Unfortunately when this error generating we are unable to see the cluster state because of timing. If you can guide / suggest from any other location I can find the state that will be helpful
Cluster physical link status ->> Amit: Cluster link is OK
Does FI have any core dumps ->> Amit: I don't have any idea about this. How can check this ?
Regards,
Amit Vyas -
IPS Tech Tips: IPS Best Practices with Cisco Remote Management Services
Hi Folks -
Another IPS Tech Tip coming up and this time we will be hearing from some past and current Cisco Remote Services members on their best practice suggestions. As always these are about 30 minutes of content and then Q&A - a low cost high reward event.
Hope to see you there.
-Robert
Cisco invites you to attend a 30-45 minute Web seminar on IPS Best Practices delivered via WebEx. This event requires registration.
Topic: Cisco IPS Tech Tips - IPS Best Practices with Cisco Remote Management Services
Host: Robert Albach
Date and Time:
Wednesday, October 10, 2012 10:00 am, Central Daylight Time (Chicago, GMT-05:00)
To register for the online event
1. Go to https://cisco.webex.com/ciscosales/onstage/g.php?d=203590900&t=a&EA=ralbach%40cisco.com&ET=28f4bc362d7a05aac60acf105143e2bb&ETR=fdb3148ab8c8762602ea8ded5f2e6300&RT=MiM3&p
2. Click "Register".
3. On the registration form, enter your information and then click "Submit".
Once the host approves your registration, you will receive a confirmation email message with instructions on how to join the event.
For assistance
http://www.webex.com
IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation. If you wish to be excluded from these invitations then please let me know!Hi Marvin, thanks for the quick reply.
It appears that we don't have Anyconnect Essentials.
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license? -
Hi All,
Cisco BE 6000 9.X support both Cisco Prime Unified Provisioning Manager 9.0 BE and Prime Collaboration 9.0 Provisioning as its management tool. OVA for both applications are pre-loaded on server from factory starting end of March 2013.
For some customers that start with Cisco Prime Unified Provisioning Manager 9.0 BE, and want to migrate to Prime Collaboration 9.0 Provisioning for advanced features, they can follow the following guide for migration.
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/unified_provisioning_manager/9.0BE/migration/guide/migrate_90be_pc90.html
For more collaterals for Cisco Prime Collaboration, please visit
http://www.cisco.com/en/US/partner/products/ps12363/index.html
Best
JingFinally, the solution of the problem was:
1-stop the daemon manager “net stop crmdmgtd”
2- Delete the xml files available under(please take backup from them) :
CSCOpx\objects\sir\work
CSCOpx\objects\topo\work
3-Start the daemon manager net start crmdmgtd (wait for 20 minutes until all process are up ) -
Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil LokaPlease try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response. -
Enterprise Manager can't show web-service in the web-services area
I'm deploying my application(stateless web-service) it work's well, but Enterprise Manager show that it's not a web-service, it can't show application in the web-services area, this fuсking server have many-many-many bugs and errors (fuсking developers was drunken a lot, imho), documentation's have many errors too, and I hate this server, but I need to use it on my work :-(
p.s. read documentation's carefully it have many errors.
p.p.s. From Russia with LOVE! Russian developers are the best from the best!Hello,
Could you be more specific about the version of OracleAS you are using?
- which exact version ? (10.1.3.x, 10.1.2.x or 9.0/x)
- which kind of Web Service are you developing? (J2EE 1.4/JAX-RPC or earlier version)
Also if you find bug in the documentation or product please send let the Oracle Support Service knows.
Regards
Tugdual Grall -
Do i have to configure ssl on cisco unified provisioning manager for it to work
Here is the code
#include <userint.h>
#include "iface.h"
#define DAQmxErrChk(functionCall) if( DAQmxFailed(error=(functionCall)) ) goto Error; else
int write_onoff(uInt8 HL, const char linename[])
int error=0; // error code (initialized to zero i.e. no error)
TaskHandle taskHandle=0; // task ID for DAQmx
char errBuff[2048]={'\0'}; // error message
// DAQmx Configure Code
SetWaitCursor(1);
DAQmxErrChk(DAQmxCreateTask("", &taskHandle));
DAQmxErrChk(DAQmxCreateDOChan(taskHandle, linename, "", DAQmx_Val_ChanPerLine ));
// DAQmx Start Code
DAQmxErrChk(DAQmxStartTask(taskHandle));
// DAQmx Write Code
DAQmxErrChk(DAQmxWriteDigitalU8(taskHandle, 1, 1, 10.0, DAQmx_Val_GroupByChannel, &HL, NULL, NULL));
Error:
SetWaitCursor(0);
if (DAQmxFailed(error)) DAQmxGetExtendedErrorInfo(errBuff, 2048);
if (taskHandle!=0)
// DAQmx Stop Code
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
if (DAQmxFailed(error)) MessagePopup("DAQmx Error", errBuff);
return error;
} // end write_digital_line
int CVICALLBACK test (int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
uInt8 onoff=0;
if (event==EVENT_COMMIT)
GetCtrlVal(panel, control, &onoff);
write_onoff(onoff, "Dev1/port0/line0");
return 0; // return 0 to tell the system the message has been handled -
SQL SERVICES ARE MISSING IN CONFIGURATION MANAGER
hi
We have recently migrated SQL2008 to SQL2012 enterprise edition on WINDOWS 2012,and everything is running fine.
Today i have just opened SQLCONFIGURATIONMANAGER for normal services checkup,but i couldn't find any SQL services in it expect integration services.i have checked in SERVICES.MSC and all services are running, this happened suddenly before it was alright(i
could see all the services)could some one please help me in finding the reason for sudden missing of the SQL services in CONFIGURATION MANAGER and way to get them back.
cheersOK, so that is strange enough and looks like permissions issue with the WMI. There is an article for SQL 2008R2, which you can check and see if the solution helps you somehow - http://www.mssqltips.com/sqlservertip/2492/why-is-sql-server-configuration-manager-missing-services/
Ivan Donev MCT and MCSE Data Platform -
User Profile Application and Managed Metadata services are missing
Running SharePoint 2013 servers on a set of 2012 R2 Servers. One of our farm administrators deleted the Secure Store service account. They recreated the Secure Store account, but after doing so, the Managed Metadata Service and User Profile Service
are now unavailable.
When going to the User Profile Page, there is an error that says "Sorry, something went wrong."
When going to the Metadata page, there is an error that says "The Managed Metadata Service or Connection is currently not available."
There is an additional error that says "The Security Token Service is not available."
How can all three services be brought back online?That specific event log error is as follows:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/12547953
Exception: System.ServiceModel.ServiceActivationException: The service '/SecurityTokenServiceApplication/securitytoken.svc' cannot be activated due to an exception during compilation. The exception message is: Exception has been thrown by the target
of an invocation.. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: Value cannot be null.
Parameter name: certificate
at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate, String id, Boolean clone, Boolean disposable)
at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceManager.ConfigureTokenHandlerCollection(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key, SecurityTokenHandlerCollection&
tokenHandlerCollection)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration.ConfigureTokenHandlerCollectionForLocalIssuer(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration..ctor()
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateSecurityTokenServiceConfiguration(String constructorString)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 5504 -
UCCX Application manager service are in partial
After upgrade the uccx from 8.2 to 8.5 then application manager services are show in partical state.
Under UCCX service enginer.
application manager service are show ( PARTIAL_SERVICE).
I check the jtapi username and password are ok, I check the CTI route point and CTI port are registered.
Please can you help me on that how to resolved this issue.Hi Ketanpatani,
Please run the JTAPI and Data Resyn operation from the UCCX Admin-> CUCM Telephony subsystem and look out for any inconsistencies between UCCX and CUCM.
Make sure all the CTI route points\ Triggers in enabled state.
If you have a UCCX HA setup, make sure to run all the services are in master state in UCCX Node1 (for this you can just reboot the UCCX second node so that all the services are running in master state from first Node of UCCX).
Thanks,
Anand
Pls rate helpful posts !! -
Content Distributor, deployment Manager and resource services are dead
Hi,
I am using Fast ESP 5.3 product single node in a window environment. Recently during a SAM patch installation I have restarted ESP and post that I have found below three services status as N/A in System Overview. Even the server was restarted
due to window patching. As these services are down I am unable to create any collection neither am I able to publish any search profile.
Content Distributor
deployment Manager
and resource services
Strangely in nctrl status all services are displayed as Running.
These are the work around I have tried:
killed processes from Task manager
Restarted ESP
So is there any possible way to bring these services up.
With Regards,
Santanu MishraWith reboot of the server the issue got resolved....
Santanu Mishra
Maybe you are looking for
-
For eg. you can't see previous reviewed games earlier than 1 month.
-
I'm totally confused about getting going using mapping software. I'd like to be able to plot routes along roads in the midwest. Any notion of how to proceed? What do I need to get going?
-
Question on JRE 1.4.2_06 version
To all, I'm using WinXP SP1 and just removed the Microsoft JVM, then I've upgraded the jdk to 1.4.2_06 version (with the JRE), somehow I found that the JRE has no server JVM provided, but the JRE folder under the JDK_HOME has it ?! (strange to me) So
-
Why can I not send a photo by e-mail?
I can not send a photo by e-mail. I have tried every thing. What else can I do?
-
Trouble moving from lightroom to Photoshop CS6 raw editor
I am having trouble moving from my lightroom 4 to Photoshop camera raw. I can move directly to Photoshop but would like to use the raw editor in photoshop CS6 and not the lightroom editor