Cisco RV 120W VERY slow performance and being unreachable

Hello!
I have strange issues with my RV 120W, which I bought after the recommendations from a Cisco/Linksys pre-sales support. I'm using this unit for SOHO environment with two clients (computers) connected and a few mobile clients. Nothing special and nothing complex. I replaced my WRT610N router with this one on behalf of the VPN features, the RV 120W offers.
Before initial setup I upgraded firmware to it's latest (1.0.1.3).
The issues I'm having with this thing are:
- very slow WLAN performance. And I mean - very, very slow. After doing some analysis I'm having a drop from 10Mbit/s to a stable speed of only a few houndrets of kilos per second. Even less. An average, constant speed test show no more than 50-80 kB/s. And I have a 20/20Mbit link.
- very slow WAN - LAN performance. Although not as slow as WLAN, even LAN is somehow slow with an average throughput from WAN to LAN show no more than 15Mbit/s.
- WAN IP address - host cannot be reached. After setting up the router to be able to echo the PING and be remotely managed, I can achive both services JUST for about 20 seconds after the unit reboots. After those 20 seconds, remote management sessions are timed out and the host is unreachable. But If I reboot the router again, I get it to work again - for no more than 20 seconds.
As this is my first (more) professional router, I'm not really sure if I've got my VPN setup correctly. I cannot get it my VPN to work either and I can't tell if these issues are related.
Any help would be appriciated.
Thanks

Hey Juka,
Sorry your having issues with the rv120w.
I seen that you upgraded the firmware on the rv120w when you got it. I always do a factory reset of the device when upgrading the firmware. I will first backup my configs, factory reset the device, then reload the configs.
Try that since you did do a firmware upgrade to see if the device speeds up for you.
The wireless issues you were describing, I would do a wireless scan using a wireless analysis software like INSSIDER or something like it, that way you can see the wireless channels that are being used and set your router manually to a channel that has no or the least congestion.
Try this and let us know what you get.

Similar Messages

Acrobat very Slow performance (50% CPU usage)

My acrobat 9 PRO (9.3.2) has suddently started to use 50% of my CPU usage everytime a *.pdf document is opened.
It is the task Acrobat.exe which is the problem. This results in VERY slow performance and I cannot use the review function without adobe is crashing!
This has not always been a problem!
Does anyone know why this is happening?
I have tried to uninstall and reinstall acrobat, without any luck!
Thanks
Peder

You probably have the same problem as I do. I use version 9.3.3 on a fairly powerful machine with Windows vista. In my case, the problem is related to the weblink.api (http://forums.adobe.com/thread/675941?tstart=0). I also uninstalled, reinstalled, repaired - nothing helps.

Very slow performance, need assistance

I have a program that has very slow performance (and I mean SLOW). I was hoping somebody could tell me how to improve the performance. I know where it hangs up (at LOOP AT it_detail INTO wa_detail.) but I'm not sure what I need to do to make it quicker. Any help would be appreciated.
TABLES: vbak,
        vbpa,
        adrc.
TYPES: BEGIN OF ty_detail,
         vbeln TYPE vbak-vbeln,
         erdat TYPE vbak-erdat,
         vdatu TYPE vbak-vdatu,
         adrnr TYPE vbpa-adrnr,
         sa_name TYPE adrc-name1,
         sa_street TYPE adrc-street,
         sa_city TYPE adrc-city1,
         sa_state TYPE adrc-region,
         sa_zip TYPE adrc-post_code1,
         sa_tel TYPE adrc-tel_number,
         kunnr TYPE vbpa-kunnr,
         ag_name TYPE kna1-name1,
         ag_street TYPE kna1-stras,
         ag_city TYPE kna1-ort01,
         ag_state TYPE kna1-regio,
         ag_zip TYPE kna1-pstlz,
         ag_tel TYPE kna1-telf1,
         vkbur TYPE knvv-vkbur,
         we_num TYPE likp-kunnr,
         we_name TYPE kna1-name1,
         we_name2 TYPE kna1-name2,
         we_street TYPE kna1-stras,
         we_city TYPE kna1-ort01,
         we_state TYPE kna1-regio,
         we_zip TYPE kna1-pstlz,
         we_tel TYPE kna1-telf1,
       END OF ty_detail.
DATA: it_detail TYPE TABLE OF ty_detail WITH KEY vbeln adrnr kunnr we_num,
      wa_detail LIKE LINE OF it_detail.
DATA: addressnum TYPE vbpa-adrnr,
      temp_kunnr TYPE likp-kunnr.
* S E L E C T I O N - S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK required WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vdatu FOR vbak-vdatu OBLIGATORY.    "Req delivery date
SELECTION-SCREEN END OF BLOCK required.
SELECTION-SCREEN BEGIN OF BLOCK temp WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_auart FOR vbak-auart OBLIGATORY.
PARAMETER: p_parfun TYPE vbpa-parvw DEFAULT 'Z5' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK temp.
*INITIALIZATION.
* REFRESH s_auart.
* CLEAR s_auart.
* s_auart-sign = 'I'.
* s_auart-option = 'EQ'.
* s_auart-low = 'OR'.
* APPEND s_auart.
* s_auart-low = 'ZDT'.
* APPEND s_auart.
* END OF SELECTION SCREEN
* M A I N - B O D Y
*Main select statement.
SELECT a~vbeln a~erdat a~vdatu c~adrnr c~kunnr
    INTO CORRESPONDING FIELDS OF TABLE it_detail
    FROM vbak AS a
      INNER JOIN vbap AS b
          ON b~vbeln = a~vbeln
      INNER JOIN vbpa AS c
          ON c~vbeln = b~vbeln
*          AND c~posnr = b~posnr
               WHERE a~auart IN s_auart
               AND a~vdatu IN s_vdatu
               AND c~parvw = p_parfun.
LOOP AT it_detail INTO wa_detail.
SELECT SINGLE name1 street city1 region post_code1 tel_number
      FROM adrc INTO (wa_detail-sa_name, wa_detail-sa_street, wa_detail-sa_city, wa_detail-sa_state,
                        wa_detail-sa_zip, wa_detail-sa_tel)
      WHERE addrnumber = wa_detail-adrnr.
SELECT SINGLE name1 stras ort01 regio pstlz telf1
      FROM kna1 INTO (wa_detail-ag_name, wa_detail-ag_street, wa_detail-ag_city, wa_detail-ag_state,
                        wa_detail-ag_zip, wa_detail-ag_tel)
      WHERE kunnr = wa_detail-kunnr.
SELECT SINGLE c~kunnr INTO temp_kunnr
      FROM vbpa AS a
          INNER JOIN lips AS b
            ON b~vgbel = a~vbeln
          INNER JOIN likp AS c
            ON c~vbeln = b~vbeln
            WHERE a~vbeln = wa_detail-vbeln.
wa_detail-we_num = temp_kunnr.
SELECT SINGLE name1 name2 stras ort01 regio pstlz telf1
      FROM kna1 INTO (wa_detail-we_name, wa_detail-we_name2, wa_detail-we_street, wa_detail-we_city, wa_detail-we_state,
                        wa_detail-we_zip, wa_detail-we_tel)
      WHERE kunnr = wa_detail-we_num.
SELECT SINGLE vkbur FROM knvv INTO wa_detail-vkbur
      WHERE kunnr = wa_detail-kunnr.
MODIFY it_detail FROM wa_detail.
ENDLOOP.
PERFORM display.
INCLUDE zpartner_displayf01.
Regards,
Davis

Hi Davis,
The culprit is the select inside the loop.
YOu should use for all entries instead .
I will show for one select, you do similar thing for others:
SELECT addrnumber name1 street city1 region post_code1 tel_number
      FROM adrc INTO table itab_adrc
for all entries in it_detail
      WHERE addrnumber = it_detail-adrnr.
sort itab-adrc by addrnumber.
LOOP AT it_detail INTO wa_detail.
read table it_adrc with key addrnumber = wa_detail-adrnr.
if sy-subrc = 0.
move fiedls of it_adrc into wa_detail.
endif.
ENDLOOP.

InDesign CC 2014 very slow performance when dragging images and changing text

InDesign CC 2014 very slow performance when dragging images and changing text.
Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

Have exact same issue on my Windows 7 machine. Resetting preferences is a workaround.
So I start InDesign whilst holding down these keys.
Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

Very slow broadband and connection keeps dropping

Hello, we have been BT customers since August 2013, after previously being Freeola customers for many years. We live in a very rural area, at the end of the exchange so we are never going to get amazingly fast broadband, we are estimated 1MB.
Previously using Speedtest.net at the beginning of the year we were getting 0.9Mbps, then in May our internet dropped and we couldn't get a proper connection or speed. We contacted Freeola who after doing some tests, said that we had a copper line failure and to contact BT. We did this and the copper line failure issue was fixed, an openreach engineer tested the line and we assumed all was fine. But we were still getting very slow speeds and the connection kept dropping. So we decided to switch to BT in August, we have put up with the slow speeds and dropping connection for 3 months hoping in vain that once we got a stable line the speed would increase and we would be back to were we expected to be.
When we are using the internet, we very often get "Your connection has been reset" errors within our browsers.
This has not happened, so I have decided to come on to this forum in the hope that we can solve this issue before my hair gets any greyer. We have a BT Home Hub 4 so we have not got all the stats that previous HH had available.
Also as we are in a rural area our telephone connection is through overhead cables and as said previously we are at the end of the exchange.
Please see below for the information that I have been able to get:
Home hub stats:
17:28:52, 28 Oct. ( 68.040000) DSL noise margin: 12.00 dB upstream, 9.50 dB downstream
17:28:51, 28 Oct. ( 67.970000) DSL line rate: 448 Kbps upstream, 192 Kbps downstream
Internet Connection Configuration
Connection Information
Connection time:
4 days, 22:01:39
Data Transmitted/Received:
221.4 MB / 2.3 GB
Bt Wholesale Broadband test:
Download Speed: 0.02
Upload speed: 0.34
Ping latency: 0.00
Further diagnostics:
Master socket is
I performed the quiet line test which wasn't too bad there was a very slight crackle, but it was with a wireless phone.
Speedtest.net results:
Ping: 463ms
Download:0.13mbps
Upload: 0.28mbps
As said previously before the copper line failure we were regularly getting download speeds of 0.9mbps.
Any help would be greatly appreciated.
Solved!
Go to Solution.

Hi jacoma,
Sorry to hear that your having issues with your BT Retail services.
You will either be on the ADSLMax (upto 8mbps) service or if your exchange has been BTw 21cn upgraded you maybe on the ADSL2/2+ (upto 12/20mbps) service depending on your line quality and length.
However these upto speeds may not be the speeds you will get as ADSL broadband connections are very dependent on the distance from your property to the exchange and the quality of your line. The further away you are from your local exchange the slower your broadband speed will be.
To enable the community to help you please see the advice below:
Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
1) Are you in the TEST socket? if not can you please connect to the test socket and repeat steps 2, 3 and 4.
All the below performed in TEST Socket:
2) is there any noise on your line. dial 17070 option2 ,called quite line test, from landline phone. should be silent but slight hum normal on cordless phone.
If there is any noise on your line such as crackling, distictive noise when the phone is connected to the TEST socket and doing the quiet line test then you need to report a line fault to BT Retail by dailling 151. Once the crackling or disticive noise has gone then your broadband should slowly recover.
3) please post adsl line statistics
4) Can you please run a BT speed test (including IP Profile) http://speedtest.btwholesale.com (not beta version)[Best done with a wired, Ethernet, connection] After Quick Test is done you need to click "Further Diagnostics" to get IP Profile.
ADSL Line Statistic Help:
If you have a BT Home Hub like the one below...
Then:
1) Go to http://192.168.1.254 or http://bthomehub.home
2) click Settings
3) Click Advanced Settings
4) Click Broadband
5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
If you have a HomeHub 4 then the majority of the ADSL Stats shown in the previous Hubs will not be there.
for HH4 users you can go to hub manager then select troubleshooting then logs and are look for 2 entries together which will show theconnection speed and noise margin for when your HH4 last sycned with the exchange.
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
cheers
I'm no expert, so please correct me if I'm wrong

Lion: very slow performance of my macbook pro

very slow performance.
went to terminal, did the top command, and got following results (mind you, ONLY have Safari and of course Terminal open):
Processes: 96 total, 4 running, 9 stuck, 83 sleeping, 419 threads      19:07:17
Load Avg: 1.99, 1.81, 1.59 CPU usage: 2.36% user, 5.21% sys, 92.41% idle
SharedLibs: 1660K resident, 0B data, 0B linkedit.
MemRegions: 15947 total, 2662M resident, 47M private, 209M shared.
PhysMem: 695M wired, 2175M active, 1083M inactive, 3953M used, 13M free.
VM: 250G vsize, 1093M framework vsize, 699065(68) pageins, 1724738(881) pageouts
Networks: packets: 70104/55M in, 66648/10M out.
Disks: 966630/9347M read, 327765/18G written.
PID   COMMAND      %CPU TIME     #TH #WQ #POR #MREG RPRVT RSHRD RSIZE
4058 top          5.2   00:03.32 1/1 0    28   29    912K   216K   1620K
4055 bash         0.0   00:00.02 1    0    20   23    356K   216K   1112K
4052 CVMCompiler 0.0   00:00.30 1    0    30   69    7780K 220K   16M
4051 login        0.0   00:00.08 2    1    33   63    928K   216K   2184K
4049 Terminal     0.3   00:01.34 7    3    128+ 164+ 7580K+ 13M    15M+
4042 ocspd        0.0   00:00.02 1    0    26   33    420K+ 276K   1376K+
4041 WebProcess   0.0   00:04.35 7    3    119 201   16M-   10M    26M-
4039 Safari       1.1   00:09.44 12   3    193 413   47M-   20M    81M-
3958 spindump_age 0.0   00:00.02 2    2    38   55    356K   220K   1100K
3956 spindump     1.3   00:42.93 16/1 13   228 145   46M+   15M    53M+
3953 aosnotifyd   0.0   00:00.18 3    1    53   279   2064K 3532K 6156K
3939 AddressBookM 6.8   06:59.11 4    1    68   4067+ 2131M- 3308K 1554M-
3895 lsboxd       0.0   00:00.06 2    2    49   69    1156K 6820K 3292K
3031 cookied      0.0   00:01.36 2    1    42   82    2028K 268K   3
every minute or so the computer blocks, every 3 or 4 hours I have to restart etc.
any suggestions?

ok, stopped syncing in System preferences and even (horror) deleted the file which reappeared in seconds.
now waiting to see if stopping the syncing helps - though computer is now working a bit better, the info on Activity Monitor would indicate it is not a real improvement
473           AddressBookMobileMeSharingAgent          me          1,4          4          1.020,0 MB          Intel (64 bit)
312           helpd          me          0,4          65          358,9 MB          Intel (64 bit)
0           kernel_task          root          1,1          76          336,6 MB          Intel (64 bit)
459           Mail          me          0,4          9          276,2 MB          Intel (64 bit)
194           java          root          0,1          30          162,4 MB          Intel (64 bit)
405           Safari          me          0,5          12          120,0 MB          Intel (64 bit)
407           Safari Web Content          me          0,2          7          100,3 MB          Intel (64 bit)
195           WindowServer          _windowserver          0,5          7          64,4 MB          Intel (64 bit)

Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom

E50 very slow performance

my E50 is giving very slow performance anyway to tune it up ?? dosn't hangs but its slow ?? any solution ps whats the best antivirus to install in E50 ?

I don't use your same workflow, and I assume you're shooting RAW. However, after I have built 1:1 previews in LR (which takes a LONG time), when I click on a file to decide if it's sharp or not, it still takes 5-10 seconds for each file to load. And my computer isn't slow, and I have the same issue on my laptop, which is new and fast. I haven't seen a satisfactory answer to this problem, nor much acknowledgement from Adobe. My files are from a Nikon D7100 with 24 megapixels, so the file size is likely a factor.
If you are shooting the type of subjects where you use 1:1 previews primarily to determine sharpness, you could consider Photo Mechanic (unfortunately it costs $150) as the first step in your workflow. It uses the embedded jpg files in the RAW file, so it loads 1:1 jpg previews almost instantly. Sports and nature photographers use this product all the time, mostly to delete losers.

Formatted Search with DI leads to a very slow performance - HELP....

Hello There
I have defined some formatted search in OPCH - everything is working fine.
I have added some logic to this form via the DI.(handlling 1 item press_event), and I get a very very slow performance - the ADDON-EXE jumps TO 230MEGA of memory, and entering values to each row in the tables/item in the form takes about 15 seconds.
Any suggestions?
RGDS
HAGAI

Hi Hagai,
Normally an addon written using the DI would take up 60-80MBs.
Are you filtering out all events except for the item press event for the form? If you are not filtering events then this can have quite a drastic affect on performance.
What logic have you got behind the press event? If the addon exe is ballooning out to 230MB then it suggests that there is either a problem with a memory leak or that an error is occuring in the code. I would recommend putting try/catch clauses at suitable places in the code and maybe specifically setting objects to null and calling the .NET garbage collector to try and minimise the potential for memory leaks.
Are you sure that it is the combination of the formatted search and the addon that is causing the problem, i.e. if you take away the formatted search but leave the addon do you still get poor performance or does everything speed up?
Hope this helps,
Owen

Very slow performance in Lightroom 3??

I just upgraded to Lightroom 3.0 and I am very suprised how slow it is!?! I don't have a very large library and I'm on two reasonably new computers yet the difference from Lightroom 2 (snappy performance) to Lightroom 3 (VERY sluggish) is quite suprising..
I'm using it on a XP and a Vista system with the same results...
Is anyone else experiencing this???
Thanks,
Ken

I've noticed a slow down in performance with Lightroom 3 as well. As far a looking around the forum for older threads, ...found older lightroom 1 and 2 threads.
Your Title "Very Slow Performance in Lightroom 3??" fits what I'm looking for just perfectly.
Jim

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

I get constant buffering very slow downloads and the pinwheel. is there a keystroke remedy for this??

i get constant buffering very slow downloads and the pinwheel. is there a keystroke remedy for this??

No magical keystroke remedy. The causes for this can be complicated.
http://www.thexlab.com/faqs/sbbod.html
Also check the health of the drive with the free demo of SMART Utiltiy.
http://www.volitans-software.com/smart_utility.php
Only happening while on the Internet or all over the place? What's your Internet speed?
http://www.speedtest.net/

What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

Sorry, its on both my iphone 4s (2 iphones) and ipad2 that the app store is slow, I have done all the above and still when i download a 1 mb app it take about a half a hour just to download and previously it wasn't even a second. When browsing the web the devices are fast and internet speed is good, but when going in to app store it takes long to load and show me the new app, updates, featured app ect. We watch movie online and the streaming is brilliant. Even on my windows pc the app store is slow and sometimes says that i store could not be opened, i have also tried on my buddies wifi and there it does exactly the same which makes me think that its on apples side, but why do you not have any problems?

I am experiencing very slow import and backing up issues.

I am experiencing very slow import and backing up catalog on exiting Lightroom. This is a very recent issue. I use RAW files.

The type of files you are importing will have an effect on the speed of the import process. Larger files, like raw sensor files, are normally much larger than JPG files.
But if this is something new, the slowness, and you are using the same camera with the same size files as previously then it's not just the file size.
What type of computer and what operating system are you using.

IPhone turning off during Phone Call with iOS 4 and very slow performance!!

Ever since the update, my phone has been switching itself off during a conversation.
Has any one else experienced this problem since the update???
Do you have a solution, if so please post it and help me!!!
Also, the phone has been going very slow.
Keyboard appearing 20 seconds later, after opening a new note and overall slow performance.

Thread here :
http://discussions.apple.com/thread.jspa?threadID=2471090&tstart=15

Cisco RV 120W VERY slow performance and being unreachable

Similar Messages

Maybe you are looking for