Cisco RV082 timeout after every 30 minute

i purchases cisco rv 082. i set MTU vale at 1500.i use public IP for WAN and just using one WAN. please help me to adjust time out problem.

well server is on internet. and we conect throgh it via internet. and for internet we used static IP.we used cisco switch becuase more than one computer conected to router.
our toplogy is very simple
1)application and database on window server 2003
2)server conect with router and by using ethernet cable and i put in LAN Port number 1
3)than another cable i put in LAN port 2 in router (as RV082 have 8 LAn ports) and other end of cable in cisco switch where 12 computer plug in switch
I also forword few ports in router (80,8080 for http and 1521 for oracle and 3389 for remote access) as few clints of server application in diffrent cities. they use this application via port forwading.
its all about out network.

Similar Messages

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Firefox become not responsive after every 10 minutes for few seconds, and it back again.

Firefox 4 become not responding after every few minutes ( mainly 10 minutes). And it came back to its normal state within 10-15 seconds. I reinstall windows and Firefox, but same problem occur. On using chrome 11 and IE 9 I have no problem. I also check that there is no problem on using Firefox 3.
I mainly use Firefox for my web browsing, but due to Firefox 4 I totally disappointed. What should I do for now?

You have an add-on installed called Internet Download Manager. It's on Mozilla's Add-on Blocklist @ https://www.mozilla.com/en-US/blocklist/ at the foot of the page.
Uninstall it by clicking the orange Firefox button, go to Add-ons and then remove it in the Extensions menu.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your other add-ons is the culprit.

BPEL process on error retrying self after every 5 minutes (no fault policy)

Hi All
We are facing very strange issue in one of our BPEL processes (we are using Oracle SOA Suite 11.1.1.3 on linux with 2 soa servers in cluster). The composite consists of a web service binding followed by a mediator which routes to three different BPEL processes (operational routing). This is all one way.
Inside the BPEL we are throwing a bpel rollback fault in the catch all to roll back any pending database changes. As soon as the error comes, In the composite diagram i can see multiple BPEL instances under the mediator and they keep on coming after every 5 minutes (basically i see two BPEL instances with a gap of one second and this pair keeps on repeating every 5 minutes)
Also we have a send email in the catch all and the email we get has a different composite id in every mail. However in the em i can see only one composite id (the first one when the error came) with multiple BPEL diagrams in it.
We are not sure what is causing the error?
1) Is it the one way mediator routing to 3 BPEL processes as per the operation invoked?
2) Is there something wrong with clustering?
3) Is there a problem with version 11.1.1.3?
Please help as we are struck and not able to move to INT.
Thanks and Regards
Amit Sachdev

Hi Anuj
Thanks for the reply again. Using the below property seems to work, but it is making the call sync (i get an empty fault in SOAP-UI) and my java client also waits for the response.
<component name="abcd">
<implementation.bpel src="abcd.bpel"/>
<property name="bpel.config.oneWayDeliveryPolicy" many="false" type="xs:string">sync</property>
<property name="bpel.config.transaction" many="false" type="xs:string">required</property>
</component>
As i told that this is a long running process (could easily take 3-4 hours), i cant afford to wait for this (should be fire and forget).
1) Is there a way, i can make it fire and forget and also stop the recovery using the properties you just told?
2) If there is no way out, i can remove the throw rollback fault in catch all, but i want the composite instance to be shown as red (i will take care of the rollbacks in db in code). I tried using the terminate activity but that doesn't make it red (like it used to be in 10g). Is there a way to mark the instance as red without throwing an uncaught fault?
Please let me know. Thanks
Also regarding the patch, if we apply it, will it still recover the BPEL instance? I mean the BPEL is throwing a rollback fault and is being exactly retried 50 times with a gap of 5 minutes (default settings in em console, not touched at all). Every time it runs it would throw the same fault again (as it reads and deletes a control file, so in successive runs that control file will not be there) leading to rollback error being thrown from catch all during automatic retry.

Request Summary: Average Response time showing value 0 after every 5 minute

Greeting Experts,
We are facing a strange problem on our portal, we have been assigned with the task of monitoring system performance of portal every one hour. But at the end of every hour, the values it was giving is 0 in the request summary tab(System Administration> Monitoring> Request Summary). After monitoring we found out that the monitoring is resetting after every 5 minutes which means that every 5 minutes the values are showing 0. We need to increase the reset time in request summary so as to evaluate the real performance of the system.
Please advice whether it is a normal case in portal, and whether the threshold can be increased in the portal.
Thanks and Regards,
Sarthak syal

Increase "HungServerRecoverSecs"(default 300 seconds) in your iisproxy.ini.
Jong
"TejoKiran" <[email protected]> wrote:
>
Hi ,
Iam using an Applet (under JRE 1.3.0).
Iam trying to send a Http Request using URL Connection.
It is working fine . However, if the response time of the server is more
than
3 minutes ,
the Response is not coming back to the the Applet and it is in a loop
trying to
read from the Server.
I have observed that the request is sent to the server and it is processed
successfully.
Then , I tried to call this sample JSP from the Applet.
<CODE : delay.jsp>
<%@ page language="java" import="java.util.*"%>
<%
System.out.println("<START>");
out.println((new Date()).toString());
System.out.println((new Date()).toString());
long cTime;
cTime = System.currentTimeMillis();
long dTime = cTime;
while(true) {
long dif = System.currentTimeMillis() - cTime;
if(dif > (15*60*1000))
break;
if((System.currentTimeMillis() - dTime) > (2*60*1000)) {
out.println("2 Minutes");
out.flush();
System.out.println("2 Minutes");
dTime = System.currentTimeMillis();
System.out.println((new Date()).toString());
out.println((new Date()).toString());
System.out.println("<END>");
%>
</CODE>
Because , I was flushing the data after every 2 minutes , it worked fine
This one worked with WebLogic 5.1 when accessing the Weblogic server
directly
. Like
http://IP:7001/ccls/test/applet.jsp (This JSP downloads the Applet under
JRE1.3)

Macbook air shuts down and then keeps restarting on its on after every few minutes

My macbook air shuts down after starting the maching and then keep restarting and shutting down in a loop untill I close the lid.
I had bought this machine last november so have just about completed a year. Please help me identify the issue?

last November is more than a year
How long will it stay on until it restarts itself? logic board or battery failure.
Contact Apple for appt. for full in shop diagnostic and possible repair.

5.0.1 constant signal drop after every 2 minutes

As soon as I updated the software in 4s to 5.0.1 the neverending trouble started. There are constant signal drop resulting communication lost and despite the signal bar showing full strength. can any one help, Have already triesd the SIM PIN option can any one help? would really appreciate it

mAN?
with that type of config. you have? you should not have any problems.
especially with the intervideo program 'cause it captures in mpg and it is a very loose coding (better said no coding at all)
try turning the ht off through bios
or try this prog.
http://www.auzol.narod.ru/download_e.html
also did you have xp sp2 allways?
maybe sp2 is causing problems
also
did you try recording on both (4) of your hdd's?

After every two minutes every thing stops.

music stops,can't write any thing , can't slide I installed mavericks twice just in one week but the problem remains

Guys Finally I had to replace My hard drive.

Timer Job job-application-server-admin-service spiking CPU after every minute

Hi all,
I have an issue in my SP2010 Farm that all the servers spiking CPU to 100% after a minute or so. I have drilled down and found that the following timer jon is the culprit.
Timer Job job-application-server-admin-service. If I change the service running to 2 minutes (default is 1 Min) then the spikes comes after every 2 minutes.
Please suggest what I can do about this?

Was it working fine previously. If yes, what changes happened which caused this issue
1. Check the ULS + Eventviewer logs at the time when this issue happens.
2. Collect perflog files and execute PAL on that this will give you the complete analysis of processes and performance at that time.
Check below:
http://social.technet.microsoft.com/Forums/office/en-US/07207109-0450-47cf-b6ee-467a58eaa887/trust-relationship-between-the-primary-domain-and-trusted-domain-failed?forum=sharepointgenerallegacy
http://webcache.googleusercontent.com/search?q=cache:nJYnqC6ug8cJ:sharepointfraggel.blogspot.com/+&cd=3&hl=en&ct=clnk&gl=in
Fix the problem
Manually clear the file system cache on the local servers (fe's) on which the timer service is running (http://support.microsoft.com/kb/939308)
Stop the SharePoint Timer Service in Administrative Tool/Services.
Go to the cache folder. For Windows Server 2008: Drive:\ProgramData\Microsoft\SharePoint\Config
Find the folder that contains the file Cache.ini
Delete all the XML configuration files in the folder so that you can verify that the folder is replaced by new XML files when the cache is rebuilt.
Open the Cache.ini file, delete all content in the file and type 1, save and exit.
Start the SharePoint Timer service
If this helped you resolve your issue, please mark it Answered

Fire fox 14 is crashing every 15 minutes. Usining win7 .This is after updating from FF13. require a solution.

FF14 is crashing randomly after every 15 minutes. Is this problem a general problem after updating from FF13. All plugins are up to date. No virus on system. Does any one have any solutions?
Thanks

More information, from the crash report for the first Crash ID listed in "More system details":
https://crash-stats.mozilla.com/report/index/63e76a0f-b807-4eab-a83c-4d14c2120719 Firefox 14.0.1 Crash Report [@ StrChrIA ]
.....the crash report links to a related bug,
[https://bugzilla.mozilla.org/show_bug.cgi?id=530074
Bug 530074 - Crash [@ StrChrIA ] from winsock and shlwapi.dll (LSP, evil *x86.dll module, or BitDefender)]
So, your crash seems to be related to Bit Defender antivirus software or one if its components (BdProvider.dll). I did a google search and according to [http://systemexplorer.net/filereviews.php?fid=11324853 this page], the file BdProvider.dll is the Bitdefender parental provider plugin.
If Firefox no longer crashes when you [[Safe Mode|restart with add-ons disabled]], look in the Firefox Add-ons Extensions list for any BitDefender add-on and disable it (see [[Disable or remove add-ons]] for details), then restart Firefox to see if the crashes stop.
You could also contact BitDefender support or ask for help on the [http://forum.bitdefender.com BitDefender forums].

Quorum/Witness Disk Offline every 15 minutes error - Event ID 1069 - Event ID 1558

2 node active passive, 2008 failover cluster. I keep getting the following error events:
The cluster service detected a problem with the witness resource. The witness resource will be failed over to another node within the cluster in an attempt to reestablish access to cluster configuration data. Event ID 1558
Cluster resource 'Cluster Disk 1' in clustered service or application 'Cluster Group' failed. Event ID 1069
However my quorum disk is online from what I can see. One thing I did notice is, the Quorum disk no longer has any files in it. It is just a empty drive.
I also noticed these errors are being entered every 15 minutes exactly.
I monitored the Quorum disk and it is going offline momentarily every 15 minutes.
Experts Exchange Posts indicate this is known issue and waiting for microsoft to deliver SP2? Really?
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_24751092.html
Any thoughts

support.microsoft.com/kb/2750820 - This does not resolved your issue because it applies only to the Quorum model Node and File share majority.
The issue is because of the cluster configuration corruption and cluster I checking after every 15 minute and is seeing the cluster quorum disk in failed state (actually it is not failed) but is not able to update the current state of the quorum disk.
Check for below logs in the cluster logs:
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: Witness Failed Gum Handler [QUORUM] Node 1
00000d84.00000f58::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: witness attach failed. next restart will happen at 2014/11/18-13:19:06.797
00000d84.00000ef8::2014/11/18-19:04:06.805 INFO [QUORUM] Node 1: quorum is not owned by anyone
Try reforming the cluster, it will resolve the issue.
Change the quorum model to Node majority and back to node and disk majority.
Stop cluster service on all the nodes and then start them back when it is stopped on all the nodes.
Thanks
Himanshu Swarnkar (MSFT)

Nokia E72 restarting after 2-3 minuts!

yesterday i have pruchased new nokia E-72 mobile phone and i was surprised that
its restarting after every 3 minuts,
i dnot know why its doing this.
to slove this issue i have update the software and now my all the application are update but thei probelm is still same and i am not able to use the mobile phone.
i have already apply all the solution those are avaliabe at internet, none of them worked.
please help me i am in the big trouble........now...

@shahg_shahg
If you reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user) and tried without memory card in place I suggest you return device to where you purchased it from!
I do use E72 running v091.003 and don't experience such issues!
Happy to have helped forum with a Support Ratio = 42.5

Machine hangs after every 30 min

I have lonovo notebook,and am facing strange problem. the keyboard ,tap pad and pointer becomes unresponsive after every 30 minutes and i have to restart it to start work again. Also, it takes more than 5 minutes to start.
I called the lenovo the support people, but the support guy was extemely rude and un-coperative and thrice cut the communication without any reason, any help, and information. Twice he hanged the phone telling that my warrenty period is expired. ( i have purchased it just before just 6 months).
I dont know now what to do, as am tired of the machine's hangs and restarts.
and am too much unhappy with the kind of after-sales support division of lenovo. Its very frustrating and i would never recommand anybody to buy lenovo.

Keep Activity Monitor open (or some other monitoring utility) and see what happens to your free memory while you're working in FCP. If it is all being depleted you may want to get an app that frees up memory. I can't recommend one because I just use Terminal and find does an OK job. However, there have been several threads about this where users have recommended specific apps. They should be findable with a search.
Russ

Outlook 2007 disconnects and restore immediatley within every 20 minutes in exchange 2013

Hi all,After upgrading from 2003 to exchange 2013 we are facing outlook disconnects and immediately restores but this happens after every 20 minutes. Outlook client is outlook 2007 sp3. There is no issues in the networks. Is there is outlook version issue
or network issue. I will check again in the network if u all say it. Please help me in this. Thanks

hello, you can try to install this hotfix:
http://support.microsoft.com/kb/2596598/en-us
Described in this blog:
http://blogs.technet.com/b/jribeiro/archive/2012/09/25/exchange-2013-preview-supported-outlook-clients.aspx
Regards,
Flynn

Why does my mac go to sleep every 30 minutes?

When watching a film my mac logs off after every 30 minutes. I have checked my energy saver preferences and moved everything to never sleep and unchecked 'put hard disks to sleep when possible' but still it sleeps after 30 minutes of non-use.
Is there something i'm missing?

From the menu bar, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Advanced... ▹ Log out after … minutes of inactivity: Off
If there's a closed padlock icon in the lower left corner of the preference pane, you may need to click it to unlock the settings. Enter your login password when prompted.
These instructions apply to OS X 10.7 or later. If you're running an older version of OS X, the preference pane may have a different name.

Cisco RV082 timeout after every 30 minute

Similar Messages

Maybe you are looking for