Cisco RV180 problem with DHCP and Vlan

Hi,
I have a RV180 router and I need it mainly for routing a /26 subnet over three vlans
VLAN ID
IP Address
Subnet Mask
DHCP Mode
DNS Proxy Status
1
82.xx.xx.xx
255.255.255.192
DHCP Server
Enabled
2
192.168.10.1
255.255.255.0
DHCP Server
Enabled
3
192.168.3.1
255.255.255.0
DHCP Server
Enabled
vlan 1 (default)
will be the default one and will have the ip 82.x.x.x, on this vlan I want to put two webservers with static/external ip
vlan2
will be for office use with the ip 192.168.10.1. I need for this DHCP enabled to give computers the correct ip in form 192.168.10.x. I will be configuring the static DHCP later on for those comps.
vlan3
will be for management with the ip 192.168.3.1. I don’t need DHCP will be using a static ip.
VLAN ID
Description
Inter VLAN Routing
Device Management
Port 1
Port 2
Port 3
Port 4
1
Default
Enabled
Enabled
Untagged
Untagged
Excluded
Excluded
2
Vlan2
Enabled
Enabled
Excluded
Excluded
Excluded
Untagged
3
Vlan3
Enabled
Enabled
Excluded
Excluded
Untagged
Excluded
Everything works, on port 1 the servers work with their static ip, on port 4 the office computers receive the correct ip from DHCP, 192.168.10.x and even on port 3 the dhcp works for my management ip. But randomly some computers start losing connectivity, some regain it but some won’t connect even if I use a static ip corresponding to their vlan. When I say they won’t connect I mean I can’t ping their gateway or the management ip of the router (all vlans have inter vlan routing enabled so no matter on what vlan I am, I can access the web interface for the router). It;s not from security settings on the computers or firewall.
I discovered they will connect if I use the static ip corresponding to vlan1 82.xx.xx.xx, but not the ip corresponding to their port number. DHCP stops working for a while, it will recover randomly.
What am I doing wrong? I don’t have other switches I could use for DHCP, I thought I could use some managed switches to solve the DHCP problem.
Thanks,
Razvan

I tried with only two vlans and set the DHCP active only for the office "vlan2". Computers receive the correct ip but some of them won't register on the network, i tried to set the ip manualy on the computers but that computer will still be isolated.
Ex: computer A receives ip 192.168.10.25, Subnet 255.255.255.0, Gateway 192.168.10.1, for 2-3 minutes i can access the router on 192.168.10.1 and the internet, after a random time interval the gateway won't even respond to ping.It's not from firewall related issues as i set to accept all both incoming and outgoing. If i set a manual ip corresponding to vlan1 "default" everything works.It's like that computer is isolated so i believe it has to do with the asignment of Tagged, untagged and Excluded settings on the vlans.

Similar Messages

  • Problems with DHCP and virtual PC connected to an AP in autonomous mode

    I've a virtual machine (Windows 7) on my MacBook running on VMWare Fusion 6 running in bridge mode and can't get an IP address from my DHCP server. NAT mode in VMWare is working, but not an option.
    I've tracked down the problem with Wireshark to the DHCP Offer that is dropped by the Cisco AP:
    On the LAN side I've captured the packets and could see that the DHCP-DISCOVER from the Windows client was answered by the DHCP server with a DHCP-OFFER (all these packets are broadcasts in the same layer 2 network), but the OFFER was not forwarded by the 1142 AP running in autonomous mode, version 15.2(4)JA.
    The problem looks to be similar to a previous discussion with WLCs where a solution is available meanwhile, see:
    https://supportforums.cisco.com/discussion/11350776/dhcp-issue-inside-vm-connected-wireless-network
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110010.html#ID2828
    Is there any solution for APs running in autonomous mode?
    Jan

    It's already a while ago, but recently I got a new router at home and have upgraded the AP to 15.3(3)JAB as well. I'm not sure what the exact reason was, but the problem reappeared. I'm a Mac user and need the bridging mode at home for my home automation system that only comes with some windows tools. Therefore I spend some time to figure out more details and was able to solve the problem.
    It turned out, that the AP needs to get an IP address by DHCP, otherwise the Windows machine never gets an IP address. I was able to see the DHCP discover broadcast from my virtual Windows PC as well as the DHCP offer from my home router. Even the packets from the DHCP relay agent (the AP with ip-helper) and the reply packet from the home router were shown with a DHCP debug on the AP and also with Wireshark on the LAN, but these broadcasts were not forwarded to wireless client. I've used Wireshark to capture packets on the WLAN adapter of my Macbook to verify that these packets were dropped on the AP and not on the Macbook with VMware Fusion. For some unknown reason the AP (acting as a bridge!) does not forward these broadcasts to the wireless client. 
    After playing around it turned out, that it WORKS if the AP itself is configured as a DHCP client and does not have a static address AND there is a DHCP entry for my virtual Windows PC like this:
    ip dhcp pool Macbook
     host 192.168.128.44 255.255.255.0
     client-identifier 0100.5056.1234.56
     dns-server 192.168.128.1
     default-router 192.168.128.1
     domain-name home.local
    It's a bit weird that the AP itself needs to be a DHCP client and I can't explain why, but this setup works for me. I like to keep the DHCP server on my home router, so I've only added this DHCP reservation on the AP. 

  • Problem with EAP and RADIUS

    Hi *,
      I have the following problem with RADIUS and EAP authentication.
    Radius server sends an "Access-Accept" packet to my AP, but the station does not authenticate.
    I've tried with different encryption configuration and with different authentication methods under "dot11 essid", but nothing changes...
    What could it be?
    Debug piece and configuration follows:
    *Jan 25 14:23:34.795: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.795: RADIUS(00000012): sending*Jan 25 14:23:34.799: RADIUS:   4E 47 56 7A 78 65 4A 4F 55 31 47 40 77 6C 61 6E  [NGVzxeJOU1G@wlan]*Jan 25 14:23:34.799: RADIUS:   2E 6D 6E 63 30 30 31 2E 6D 63 63 30 30 31 2E 33  [.mnc001.mcc001.3]*Jan 25 14:23:34.799: RADIUS:   67 70 70 6E 65 74 77 6F 72 6B 2E 6F 72 67        [gppnetwork.org]*Jan 25 14:23:34.799: RADIUS:  NAS-Port-Type       [61]  6   802.11 wireless           [19]*Jan 25 14:23:34.799: RADIUS:  NAS-Port            [5]   6   265                       *Jan 25 14:23:34.799: RADIUS:  NAS-Port-Id         [87]  5   "265"*Jan 25 14:23:34.799: RADIUS:  NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:34.811: RADIUS/DECODE: EAP-Message fragments, 20, total 20 bytes*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:34.831: RADIUS:  AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:34.831: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:34.831: RADIUS:  AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:34.831: RADIUS:   32                                               [2]*Jan 25 14:23:34.831: RADIUS(00000012): Config NAS IP: 192.168.173.2*Jan 25 14:23:34.831: RADIUS/ENCODE(00000012): acct_session_id: 17*Jan 25 14:23:34.835: RADIUS(00000012): sending*Jan 25 14:23:34.835: RADIUS:   10 01 00 01 07 05 00 00 D9 37 C3 D9 79 3E 33 EA  [?????????7??y>3?]*Jan 25 14:23:34.835: RADIUS:   F3 7D 73 43 BF BA D0 6A                          [?}sC???j]*Jan 25 14:23:34.835: RADIUS:  NAS-Port-Type       [61]  6   802.11 wireless           [19]*Jan 25 14:23:34.835: RADIUS:  NAS-Port            [5]   6   265                       *Jan 25 14:23:34.835: RADIUS:  NAS-Port-Id         [87]  5   "265"*Jan 25 14:23:34.835: RADIUS:  NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.035: RADIUS: Received from id 1645/64 192.168.177.158:1812, Access-Challenge, len 304*Jan 25 14:23:35.039: RADIUS:   46 10 78 5F 5F B0 CB 6C 0B 05 00 00 DA C3 BF 28  [F?x__??l???????(]*Jan 25 14:23:35.039: RADIUS:   E0 18 2B 95 97 C2 0A D7 40 53 FE 62              [??+?????@S?b]*Jan 25 14:23:35.039: RADIUS(00000012): Received from id 1645/64*Jan 25 14:23:35.039: RADIUS/DECODE: EAP-Message fragments, 60+220, total 280 bytes*Jan 25 14:23:35.355: RADIUS/ENCODE(00000012):Orig. component type = DOT11*Jan 25 14:23:35.355: RADIUS:  AAA Unsupported Attr: ssid              [265] 8   *Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41                                [WifiEA]*Jan 25 14:23:35.355: RADIUS:  AAA Unsupported Attr: interface         [157] 3   *Jan 25 14:23:35.359: RADIUS:   92 DA 5E 26 CF 40 01 22 7A 8E F5 C1              [??^&?@?"z???]*Jan 25 14:23:35.359: RADIUS:  NAS-Port-Type       [61]  6   802.11 wireless           [19]*Jan 25 14:23:35.359: RADIUS:  NAS-Port            [5]   6   265                       *Jan 25 14:23:35.359: RADIUS:  NAS-Port-Id         [87]  5   "265"*Jan 25 14:23:35.359: RADIUS:  NAS-IP-Address      [4]   6   192.168.173.2             *Jan 25 14:23:35.367: RADIUS: Received from id 1645/65 192.168.177.158:1812, Access-Accept, len 30*Jan 25 14:23:35.367: RADIUS:  authenticator 8C 2C 1B 97 82 BB 6C 7F - AA D3 4A AB CA 22 8B B7*Jan 25 14:23:35.367: RADIUS:  EAP-Message         [79]  10  *Jan 25 14:23:35.367: RADIUS:   03 01 00 04 00 00 00 00                          [????????]*Jan 25 14:23:35.371: RADIUS(00000012): Received from id 1645/65*Jan 25 14:23:35.371: RADIUS/DECODE: EAP-Message fragments, 8, total 8 bytes*Jan 25 14:23:35.671: %DOT11-7-AUTH_FAILED: Station d023.dbb8.d6a9 Authentication failed
    Config:
    aaa new-model!aaa group server radius rad_eap server-private 192.168.177.158 auth-port 1812 acct-port 1813 key 7 044803071D2448!aaa authentication login eap_methods group rad_eapaaa authorization exec default if-authenticated aaa authorization network default if-authenticated !         aaa session-id commonip name-server 192.168.177.45!                dot11 ssid WifiEAP1   vlan 10   authentication open eap eap_methods    authentication shared eap eap_methods   authentication key-management wpa optional   guest-mode!         bridge irb!         interface Dot11Radio0 no ip address no ip route-cache !        encryption vlan 10 mode ciphers aes-ccm tkip wep128 !        broadcast-key vlan 10 change 300 !        ssid WifiEAP1 !        antenna gain 0 station-role root!         interface Dot11Radio0.10 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled!         interface GigabitEthernet0 ip address 192.168.173.3 255.255.255.0 no ip route-cache!         interface GigabitEthernet0.1 encapsulation dot1Q 10 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled!         interface BVI1 ip address 192.168.173.2 255.255.255.0 no ip route-cache!ip radius source-interface BVI1 bridge 1 route ip
    thanks so much!

    Stefano: not sure if related but there is an unsupported attribute in the debugs:
    Jan 25 14:23:35.355: RADIUS:  AAA Unsupported Attr:
    *Jan 25 14:23:35.355: RADIUS:   57 69 66 69 45 41
    *Jan 25 14:23:35.355: RADIUS:  AAA Unsupported Attr: interface
    Try to eliminate any configured attributes on radius except those in IETF radius. Then try again.
    You may also chech by removing the shared eap as suggested above. Let us know if this works.
    Sent from Cisco Technical Support iPad App

  • [SOLVED] Problem with netctl and dhcpcd

    Hi everybody,
    I had a problem with netctl and dhcpcd.
    I was using netctl and wifi-menu to connect to wirelless networks with dhcp.
    It worked fine at home, then i went to a friend where it also worked but then i went back home and it failed at every try with those error messages:
    dhcpcd[2718]: version 6.0.5 starting
    dhcpcd[2718]: wlp9s0: rebinding lease of 192.168.1.154
    dhcpcd[2718]: wlp9s0: reject NAK via 192.168.178.1
    dhcpcd[2718]: wlp9s0: soliciting a DHCP lease
    dhcpcd[2718]: wlp9s0: offered 192.168.178.44 from 192.168.178.1
    dhcpcd[2718]: timed out
    network[2659]: DHCP IP lease attempt failed on interface 'wlp9s0'
    systemd[1]: netctl@wlp9s0\xxx.service: main process exited, code=exited, status=1/FAILURE
    systemd[1]: Failed to start Automatically generated profile by wifi-menu.
    systemd[1]: Unit [email protected] entered failed state.
    I figured that dhcpcd tried to rebind an ip that my router rejected and didn't accept the ip that it offered instead.
    The solution was to delete:
    /var/lib/dhcpcd/dhcpcd-wlp9s0.lease
    now how can i configure netctl and or dhcpcd so that won't happen again and that it accepts all ips offered by routers?
    Last edited by Samy (2013-09-04 13:32:13)

    I've had this happen now and again. You can rebind the lease yourself with:
    $ dhcpcd --rebind
    You could also try increasing the timeout by adding
    TimeoutDHCP=
    to your netctl profile/s - see netctl.profile(5) as WonderWoofy suggests. Although I haven't tried the latter.
    Last edited by youngdm (2013-09-01 22:01:05)

  • My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

    My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
    Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
    Skip

    I am having lot's of lag time with Safari, etc..
    I'll type in a website.. and it will take 15-20 seconds to start..
    Start time: 17:51:37 12/02/14
    Model Identifier: MacBookPro11,3
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 14 days 3:02
    USB
       My Passport 07B8 (Western Digital Technologies, Inc.)
    Diagnostic reports
       2014-11-13 QuickLookSatellite crash x2
       2014-11-21 com.apple.WebKit.Plugin.64 crash
    Log
       Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
       Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
       Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
       Dec  1 09:09:03 [[0xffffff802bfa4000]  OpCode 0x0C01 (Set Event Mask) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
       Dec  1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
       Dec  1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
       Dec  1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
       Dec  1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
       Dec  1 10:31:08 ALF: ifnet_get_address_list_family error 12
       Dec  1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
       Dec  1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
       Dec  1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
       Dec  1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
       Dec  1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
       Dec  1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
       Dec  1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
       Dec  1 20:08:30 jnl: disk3s2: journal replay done.
       Dec  1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
       Dec  2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
       Dec  2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
       Dec  2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
    Swap (MiB): 41556
    Activity
       Net: 210 in, 20 out (KiB/s)
    Memory: kernel_task (UID 0) is using 1632 MB
    kexts
       com.cisco.kext.acsock (1.1.0)
       com.wdc.driver.USB.64.10.9 (1.0.1)
    Daemons
       com.cisco.anyconnect.vpnagentd
       com.oracle.java.JavaUpdateHelper
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.google.keystone.daemon
       com.wdc.WDSmartWareService
       com.oracle.java.Helper-Tool
       com.adobe.fpsaud
       com.wdc.SmartwareDriveService
    Agents
       com.adobe.AdobeCreativeCloud
       com.zimbra.desktop
       com.citrix.ServiceRecords
       com.google.keystone.system.agent
       com.apple.photostream-agent
       com.genieo.completer.download
       com.genieo.completer.update
       com.cisco.anyconnect.gui
       com.citrix.ReceiverHelper
       com.citrix.AuthManager_Mac
       com.citrix.FMDAgent.14800.UUID
       com.oracle.java.Java-Updater
       com.fiplab.MailTabProHelper
       com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
       com.citrixonline.GoToMeeting.G2MUpdate
       com.apple.AirPortBaseStationAgent
       com.microsoft.SyncServicesAgent
    Startup items
       /System/Library/StartupItems/ciscod/ciscod
       /System/Library/StartupItems/ciscod/StartupParameters.plist
    Bundles
       /System/Library/Extensions/hp_fax_io.kext
       - com.hp.kext.hp-fax-io
       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
       - com.hp.print.hpio.Inkjet1.kext
       /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
       - com.hp.print.hpio.Inkjet4.kext
       /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
       - com.hp.print.hpio.inkjet8.kext
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/WD1394_64_109HPDriver.kext
       - com.wdc.driver.1394.64.10.9
       /System/Library/Extensions/WDUSB_64_109HPDriver.kext
       - com.wdc.driver.USB.64.10.9
       /Library/Extensions/hp_io_printerclassdriver_enabler.kext
       - com.hp.hpio.hp-io-printerclassdriver-enabler
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
       - com.citrix.citrixicaclientplugIn
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
       - com.google.googletalkbrowserplugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/npg.plugin
       - npg.graphon.com
       /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
       - com.google.o1dbrowserplugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/Internet Plug-Ins/SlingPlayer.plugin
       - com.slingmedia.slingplayer.plugin.nspapi
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/FMDSysPrefPane.prefPane
       - Citrix.FMDSysPrefPane
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
       - com.westerndigital.quickview.prefpanel
       /Library/PreferencePanes/Zimbra.prefPane
       - com.zimbra.prefpanel
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Internet Plug-Ins/WebEx.plugin
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx64.plugin
       - com.cisco_webex.plugin.gpc64
    dylibs
       /usr/lib/libaudioc.dylib
       /usr/lib/libclipc.dylib
       /usr/lib/libcs.dylib
       /usr/lib/libdc.dylib
       /usr/lib/libfilec.dylib
       /usr/lib/libMonoPosixHelper.dylib
       /usr/lib/libpbr.dylib
       /usr/lib/libprintc.dylib
       /usr/lib/libsc.dylib
       /usr/lib/libSFFileMonitor.32.dylib
       /usr/lib/libSFIPC.32.dylib
       /usr/lib/libSFIPC.I.dylib
       /usr/lib/libSFsqlite3.7.4.dylib
       /usr/lib/libSFSyncEngine.I.dylib
       /usr/lib/libupc.dylib
    App extensions
       it.bloop.airmail.beta10.Airmail-Today-Beta
       it.bloop.airmail.beta10.Airmail-Composer-Beta
       com.wunderkinder.wunderlistdesktop.sharingextension
       com.wunderkinder.wunderlistdesktop.todayextension
       com.readitlater.PocketMac.AddToPocketShareExtension
       com.stylemac.instadesk.Photodesk-Feed
       it.bloop.airmail.beta10.Airmail-Share-Beta
    Apps
       /Applications/Uninstall IM Completer.app
    Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/opt/cisco/anyconnect/gui_keepalive</key>
        <true/>
        </dict>
        </dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.gui</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>open</string>
        <string>--wait-apps</string>
        <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
       ...and 8 more line(s)
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>9</integer>
        <key>Minute</key>
        <integer>57</integer>
        <key>Weekday</key>
        <integer>3</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
       http://www.apple.com/DTDs/PropertyList-1.0.dtd >
       <plist version="1.0">
       <dict>
            <key>Label</key>
            <string>com.cisco.anyconnect.vpnagentd</string>
            <key>ProgramArguments</key>
            <array>
                 <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
                 <string>-execv_instance</string>
            </array>
            <key>KeepAlive</key>
            <true/>
            <key>RunAtLoad</key>
            <true/>
            <key>AbandonProcessGroup</key>
            <true/>
            <key>EnableTransactions</key>
            <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.SmartwareDriveService</string>
        <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.WDSmartWareService</string>
       <!-- <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.download</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>download</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Downloads</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.update</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>update</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>StartInterval</key>
        <integer>86400</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.microsoft.SyncServicesAgent</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
               <key>Label</key>
               <string>com.zimbra.desktop</string>
               <key>ProgramArguments</key>
               <array>
                       <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                       <string>start</string>
                       <string>-w</string>
               </array>
       

  • Kindly Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN ?

    Kindly 
    Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
    Thanks,

    Linksys/Cisco E4200 are compatible with DHCP. Second, these Wireless-N routers are only capable of enabling the VPN traffic to pass through the device.  You will need a VPN router and software to create the actual network to connect with your VPN client.

  • Problem with JFrame and busy/wait Cursor

    Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
    for the duration of some operation (usually just a few seconds).
    I can get it to work in some situations, but not others.
    Timing does seem to be an issue.
    There are thousands of posts on the BugParade, but
    in general Sun indicates this is not a bug. I just need
    a work-around.
    I've written a test program below to demonstrate the problem.
    I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
    I have not tested on Windows yet.
    When you run the following code, three JFrames will be opened,
    each with the same 5 buttons. The first "F1" listens to its own
    buttons, and works fine. The other two (F2 and F3) listen
    to each other's buttons.
    The "BUSY" button simply sets the cursor on its listener
    to the busy cursor. The "DONE" button sets it to the
    default cursor. These work fine.
    The "SLEEP" button sets the cursor, sleeps for 3 seconds,
    and sets it back. This does not work.
    The "INVOKE LATER" button does the same thing,
    except is uses invokeLater to sleep and set the
    cursor back. This also does not work.
    The "DELAY" button sleeps for 3 seconds (giving you
    time to move the mouse into the other (listerner's)
    window, and then it behaves just like the "SLEEP"
    button. This works.
    Any ideas would be appreciated, thanks.
    -J
    import java.awt.BorderLayout;
    import java.awt.Cursor;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class BusyFrameTest implements ActionListener
    private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
    private static Cursor done = Cursor.getDefaultCursor();
    JFrame frame;
    JButton[] buttons;
    public BusyFrameTest (String title)
    frame = new JFrame (title);
    buttons = new JButton[5];
    buttons[0] = new JButton ("BUSY");
    buttons[1] = new JButton ("DONE");
    buttons[2] = new JButton ("SLEEP");
    buttons[3] = new JButton ("INVOKE LATER");
    buttons[4] = new JButton ("DELAY");
    JPanel buttonPanel = new JPanel();
    for (int i = 0; i < buttons.length; i++)
    buttonPanel.add (buttons);
    frame.getContentPane().add (buttonPanel);
    frame.pack();
    frame.setVisible (true);
    public void addListeners (ActionListener listener)
    for (int i = 0; i < buttons.length; i++)
    buttons[i].addActionListener (listener);
    public void actionPerformed (ActionEvent e)
    System.out.print (frame.getTitle() + ": " + e.getActionCommand());
    if (e.getActionCommand().equals ("BUSY"))
    frame.setCursor (busy);
    else if (e.getActionCommand().equals ("DONE"))
    frame.setCursor (done);
    else if (e.getActionCommand().equals ("SLEEP"))
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    else if (e.getActionCommand().equals ("INVOKE LATER"))
    frame.setCursor (busy);
    SwingUtilities.invokeLater (thread);
    else if (e.getActionCommand().equals ("DELAY"))
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    System.out.println();
    Runnable thread = new Runnable()
    public void run()
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.println (" finished");
    public static void main (String[] args)
    BusyFrameTest f1 = new BusyFrameTest ("F1");
    f1.addListeners (f1);
    BusyFrameTest f2 = new BusyFrameTest ("F2");
    BusyFrameTest f3 = new BusyFrameTest ("F3");
    f2.addListeners (f3); // 2 listens to 3
    f3.addListeners (f2); // 3 listens to 2

    I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
    I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

  • Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

    Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
    My Macbook pro is just 2 months old.
    What should I do? Is there a way to delete my Mac Address Book without having the problem above?
    Many thanks
    Regis

    zlatan24 wrote:
    For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
    If it is a windows problem it's not going to run on the OP's MacBook Pro

  • Problems with Safari and Firefox (HTTP?)

    Problems with Safari and Firefox (HTTP?)
    On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
    On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
    On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
    What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    and
    defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
    but that did not help,
    Nanne

    I'm still wondering why it happens now at this moment in time...
    PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
    It may work when re-enabled

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problem with DMGs and error: "No Mountable File Systems"

    Problem with DMGs and error: "No Mountable File Systems"
    The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
    This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
    I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
    Recent programs includes:
    1) upgrading from Parallels 5.5 to 6.0 on both machines.
    2) using an HP secure II usb drive and setting up a secure disk.
    3) installing new itunes 10
    4) new update to Flip For Mac.
    The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
    Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
    In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
    Message was edited by: remaia

    Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Problem with Speaker and Headset in Windows Vista

    Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
    Regards,Edwin

    When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
    http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

  • Problem with trigger and entity in JHeadsart, JBO-25019

    Hi to all,
    I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
    I have a problem with trigger and entity in JHeadsart
    I have 3 entity and 3 views
    DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
    TelUoView based on TelUo entity based on TEL_UO database table.
    NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
    I am using JHS to create :
    A JHS table-form based on DsitTelephoneView
    A JHS table based on TelUoView
    A JHS table based on NewAnnuaireView
    LIB_POSTE is a :
    DSIT_TELEPHONE column
    TEL_UO column
    NEW_ANNUAIRE column
    NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
    Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
    Lib_poste is upadated in JHS table based on TelUoView
    I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
    CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
    AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
    FOR EACH ROW
    BEGIN
    UPDATE DSIT_TELEPHONE T
    SET t.lib_poste = :new.lib_poste
    WHERE t.id_tel = :new.id_tel;
    END;
    When I change the lib_poste with the application :
    - the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
    - but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
    - in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
    oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
    25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
    It is as if it had lost the bond with the row in the entity.
    Could you help me please ?
    Regards
    Laurent

    The following example should help.
    SQL> create sequence workorders_seq
      2  start with 1
      3  increment by 1
      4  nocycle
      5  nocache;
    Sequence created.
    SQL> create table workorders(workorder_id number,
      2  description varchar2(30),
      3   created_date date default sysdate);
    Table created.
    SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
      2  BEFORE INSERT ON workorders
      3  FOR EACH ROW
      4  BEGIN
      5  SELECT workorders_seq.nextval
      6    INTO :new.workorder_id
      7    FROM dual;
      8  END;
      9  /
    Trigger created.
    SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
    Session altered.
    SQL> insert into workorders(description) values('test1');
    1 row created.
    SQL> insert into workorders(description) values('test2');
    1 row created.
    SQL> select * from workorders;
    WORKORDER_ID DESCRIPTION                    CREATED_DATE
               1 test1                          30-NOV-2004 15:30:34
               2 test2                          30-NOV-2004 15:30:42
    2 rows selected.

Maybe you are looking for

  • How can I get rid of Tencent QQ Adware?

    Hey Just wondering if any one here runs Tencent QQ on mac os x? I have to run QQ as everyone in China uses it for: work, file sharing, blogging, and communication. The PC version is full of all sorts of horrors. But I'm finding problems with the mac

  • Hiding table columns dynamiclly

    Hello experts. I'm trying to build a wizard which presents a simple query, one of the steps of the wizard is letting the user choose which columns he wants to see in the table at the end (the table is connected to the query). When I deploy the model,

  • I would like to put my camera roll into my laptop, i would like to put my camera roll into my laptop

    how do I download or upload pictures to my laptop from my iphone

  • How to replicate bundle from Author to Publish

    Hi, I have published a java bundle by right clicking and select 'Build Bundle' on the 'bnd' file, the bundle gets deployed properly on the 'Author' instance, but the 'publish' instance deploy failed. The code currently works in 'Author'. How do I rep

  • Need Document/Steps for Cloning RAC 11g.

    Hi, I am looking for a document to clone an existing RAC 11g database. I believe in the cloning process this will create a new RAC database... Also the source database data has to be applied to the cloned rac db. Environment 11g, AIX. Advice needed.