Cisco's AnyConnect Network Access Manager (NAM)

Hi dears,
I configurate EAP_FAST in Cisco ISE and want wired users authenticate from ISE. I install Network Access Manager Profile Editor and Cisco Anyconnect Security Mobility Client on PC. I configure Network Access Manager when i want to save as that I did not see the . \newConfigFiles folder. Then I did that: Organize’, ‘Folder and Search Options’, ‘Show hidden files, folders, and drives. but in this case i did see the network access manager folder.
I need a to install Cisco’s AnyConnect Network Access Manager (NAM) on PC. HOW I get this soft? I have a smartnet for ISE.
Which email address(to cisco) i must be write to get this soft?
Thanks.

You can download the Network Access Manager module from CCO. This link should work if you have a CCO account.
http://software.cisco.com/download/release.html?mdfid=283000185&softwareid=282364313&release=3.1.05160&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rs
The file name will be similar to anyconnect-win-3.1.05160-pre-deploy-k9.iso. Just unzip the ISO with 7zip or Winrar and you will see the NAM msi file anyconnect-nam-win-3.1.05149-k9.msi.

Similar Messages

AnyConnect + Network Access Manager (NAM) + Certificate

Hello,
I want to use Network Access Manager with Anyconnect.
I configured a WiFi network with EAP-TLS authentication.
The certificate used for EAP-TLS has the following EKU:
- clientAuth (1.3.6.1.5.5.7.3.2)
- emailProtection (1.3.6.1.5.5.7.3.4)
- msSmartcardLogin (1.3.6.1.4.1.311.20.2.2)
It works with Microsoft Wireless Zero Configuration.
With NAM, I have this error "No valid certificates available. Please insert a smart card or install a valid certificate"
If I remove msSmartcardLogin EKU, it works with NAM.
I can't remove this EKU because Smart card logon is used.
Why msSmartcardLogin EKU generates this error?
How can I resolve it?
Thanks a lot for your support.
Patrick

Hi,
I am having the same issue, but have noticed that every now and then the NAM will fail to detect the certificate 3 times then suddently in the NAM event log there will be a message that saying "“Enumerating certificate store 'user personal'.” and it would retrieve the local certificate for authentication.
Has anyone else experienced this problem? and knows the fix?
Regards,
JZ
anyconnect fails to detect the local certificate store about 3 time before “Enumerating certificate store 'user personal'.” And retrieves the local user certificate for authentication.

AnyConnect Network Access Manager and Windows 10

Hello,
I'm currently testing Windows 10 for a client that use AnyConnect NAM (without VPN) to manage his wired and wireless corporate networks.
After some tests with the latest 3.1 version, it seems that NAM is breaking something in Windows 10 Tech Preview.
Immediately after the installation, trying to start an application as an Administrator doesn't allow me to enter user credentials anymore and at the logon screen, I can only use a Microsoft Account. I'm unable to enter my Domain credentials.
Any idea on how to prevent this?
Regards,
Gerald

For info, newest version 3.1.07021 fixed the problem.
NAM is now working correctly on Windows 10 Tech Preview.

Is Anyconnect Network Access Manager module supported on iOS ?

Hi there,
I can't seem to find any reference in regards to support for iOS / android . Can someone please confirm this is the case? much appreciated !!

AnyConnect VPN is available for iOS, not Anyconnect NAM.

NEO4 Plat. -- Nvidia NAM (network access manager)

Hi everyone,
My motherboard documentation mentions that the board supports the Nvidia network access manager firewall. I have not yet installed the software for it. Is it a hardware firewall?
I have used ZoneAlarm for a couple of years, and have found it both simple and effective. How does the NAM compare?
Thanks,
DEM

i was wondering the same thing.....my board is sitting next to my desk, thursday is my day off so hopefully i can get her built than, but i was reading the book and noticed this too, i know it has something to do with the built in firewall...but otherwise not sure whatesle there is to it, i run norton internet secuirty for 3 years now with issues (built in firewall) so i suppose even with the nvidia active firewall i will still install norton of course for antivirus....

Network Access Manager - Service (Secure Mobility Client)

We are currently working on Deploying the Secure Mobility Client.
1. We are looking at the ability to stop the Network Acess Manager without Admin rights, According to the Cisco Documentation on this:
"Stopping and Starting the Network Access Manager"
Users with local administrator privileges can start and stop the Network Access Manager. Users without local administrator privileges cannot start and stop the Network Access Manager without using the service password defined in the Authentication panel of the profile editor.
Question: I am unable to find the said option in the Authentication panel in the profile editor
2. Since we will be using NAM for all of our computers, and since some users will not be using the VPN, we will need to push out profiles to the users (This is easy however we are concerned about updates and getting those pushed). A collegue shared that he head at Cisco Live2011 that there is an option in NAM to update it's profiles by connecting to the VPN-Headend without actually authenticating and logging into the VPN.
I know if a user connects to the VPN Headend we can update the profiles on NAM/VPN etc... however without them connecting I'm not sure if there is any way to do so?

Hi Alwin,
There is nothing to be done with your anyconnnect client.... if needed changes needs to ne done at VPN FW/Router where your anyconnect connection is established..... here i guess your corporate office is having this VPN server.....
They have configured it as tunnel all mode... means all traffic will be taken through VPN... see from your output preferred default route is pointed to 192.168.0.101, which is a vpn gateway....
If needed anyconnect vpn configuration needs to be changed from tunnel all to split-tunnel....
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.101 20
0.0.0.0 0.0.0.0 146.236.12.1 146.236.12.73 2
Regards
Karthik

What changes does Network Access Manager have to do into Windows to work fine?

We are deploying the Network Access Manager in Windows machines to work in 802.1x cenario with CISCO ISE. In some machines NAM doesn't work well. What Windows 7 features does NAM module have to interact with Operational System?

We solved the issues with a custom package made with WISE and we deployed it with Microsoft SCCM.
SCCM works with a System Account to install applications and we deduced that issues happened because the account privileges to install AnyConnect in some machines was not enough.
Thanks for all.

Network Access Manager and WiFi

I have a computer that is a member of a domain. The computer has Network Access Manager and Cisco Secure Mobility Client VPN modules loaded. I have the computer setup to authenticate to the network before it connects to the domain. This is working fine.
When a user brings their computer home, they are unable to connect to their wireless network. I tried adding some wifi authentication in Network Access Manager, but that did not fix the issue. I am still going to do some reading up on this issue, but I was hoping that somebody could give me some input if they have any experience?
I need for people to be able to authenticate to the network when they are at work, and VPN when they are at home.
Thanks,
Alex Pfeil

You mean you have start before feature (SBL) enabled and its working fine as long as you're at work. I guess I have seen this before.
What I read in an internal enhancement request that Cisco AnyConnect 3.0 Start Before Logon (SBL) does not work with user created personal networks. NAM establishes connections with user created network profiles only after user logon, and consequently there will be no network connectivity at the time Start Before Logon executes.
What version of NAM are you using?
Jatin Katyal
- Do rate helpful posts -

Using Network Access Manager to manage VPN connections

Can Network Access Manager be used to manage Cisco AnyConnect Secure Mobility VPN connections?

Does Nvidia have any kind of technical support for their drivers? I could not find anything on their site. I can not figure out why the Network Access Manager will not load in IE for me. My WindowsXP and IE are completely up-to-date. I can access the Network Access Manager in the Firefox browser, but the profiles will not change.
Under Personal Firewall->Basic Configuration, I cannot switch my profile. It takes me to the " Please Wait Configuration settings are being applied" screen, with the progress meter, but nothing ever happens, even if I leave it sitting for 30 minutes. I noticed there are error messages on that screen: "Error in ProfileCustom1Base Set : Invalid selection. Please choose a valid selection" and "Error in ProfileCustom2Base Set : Invalid selection. Please choose a valid selection" The error messages appear regardless of which profile I'm attempting to use: low, off, high, medium, custom1-3.
This is really bugging me, because I want to use the firewall, but I cannot open ports for programs I want to use.
If someone knows a contact email for Nvidia, please let me know.
Thanks.

TACACS+ Accounting "Network Access Profile" name is missing

Hello,
I have a problem trying to export logs to the Cisco ACS View from my ACS 4.2
In the document http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_view/4.0/user/guide/appendixA.html Cisco states that one of the mandatory attributes for export to work is "Network Access Profile Name" under TACACS+ Accounting (under ACS 4.2 System configuration -> Logging settings). Well, I don't have this mandatory attribute listed in ACS under TACACS+ accounting log configuration. I tried to ignore this attribute, but then ACS View complains about null value for the attribute mentioned above.
Is this some bug in ACS View or ACS or maybe I simply missing something?;)
Best Regards,
Igor

Cisco created a new bug for it:
CSCtq85420
Best Regards,
Igor

Win x64 K8N Neo4 SLI--How do I uninstall Nvidia Network Access Manager?

I'm trying to get completely out of the Nvidia firewall I made the mistake of installing. I uninstalled all Nvidia drivers, but control program/add-delete programs shows a Nvidia Network Access Manager and a Nvidia Mixer. Clicking on remove does nothing. Just ignores me. I turned off virus, Windows Firewall, closed all programs but I can't get rid of the dumb thing.
Anybody figure out how to do it?

Ctl Program/Add remove programs & going to Uninstall Nvidia drivers gives the option to uninstall components, but either checking all or just the ethernet componenet still leaves Nvidia Network Access Manager remaining. Clicking on uninstall does nothing; apparently there's no way to get rid of it
Regards, Ron

3dmark 03 and network access manager

I did a reformat today and when I went to bench my rig with 3dmark 03 the program crashed just after the Battle of Proxicon (or whatever its called, 2nd test). The only thing different that I had installed after the reformat (it was working ok before reformat btw) was the network access manager, so I uninstalled it and now 3dmark works again.
Anyone else had similar issues with the network access manager or any idea why it would crash 3dmark?

Quote
Originally posted by revrondo
I did a reformat today and when I went to bench my rig with 3dmark 03 the program crashed just after the Battle of Proxicon (or whatever its called, 2nd test). The only thing different that I had installed after the reformat (it was working ok before reformat btw) was the network access manager, so I uninstalled it and now 3dmark works again.
Anyone else had similar issues with the network access manager or any idea why it would crash 3dmark?
OMG .. you are my hero of the month ! You have another great fix like that for Punkbuster bug ?!
Thx
RainZ

Network Access Manager - Switch to Custom Profile

Hi,
I'm trying to open some ports using the web-interface for the firewall Network Access Manager. When I go to open ports, it says to switch to one of the custom profiles. I select the profile, click on apply and I see 'Please Wait' and 'Configuration Settings Are Being Applied' messages. The problem is, nothing ever happens. It just sits there. So I can never actually change any of the port settings, which is not very good. Anyone seen this problem?
Oh yah, I was never able to even view the Network Access Manager front-end until I switched from IE to Firefox ... never would have thought something like that would be broken in IE.

Does Nvidia have any kind of technical support for their drivers? I could not find anything on their site. I can not figure out why the Network Access Manager will not load in IE for me. My WindowsXP and IE are completely up-to-date. I can access the Network Access Manager in the Firefox browser, but the profiles will not change.
Under Personal Firewall->Basic Configuration, I cannot switch my profile. It takes me to the " Please Wait Configuration settings are being applied" screen, with the progress meter, but nothing ever happens, even if I leave it sitting for 30 minutes. I noticed there are error messages on that screen: "Error in ProfileCustom1Base Set : Invalid selection. Please choose a valid selection" and "Error in ProfileCustom2Base Set : Invalid selection. Please choose a valid selection" The error messages appear regardless of which profile I'm attempting to use: low, off, high, medium, custom1-3.
This is really bugging me, because I want to use the firewall, but I cannot open ports for programs I want to use.
If someone knows a contact email for Nvidia, please let me know.
Thanks.

Network access manager gone crazy?

Hey network techies out there. Why in the log for Network access manager is it consistently filling with block of port 137, and 138? Does this happen on other computers too? I am connected to a 100 base T network at school and I have file and printer sharing off.
Secondly, in the administrative properties tab and then the version area...does everyones else say it can't find nCLI.exe?

Hi There Sdiver2489
I am a network administrator for a college running 2000 machines ...
Questions
Quote
Does this happen on other computers too?
Is This On The Server You Are Doing It With The Network Software Installed ?
Quote
Secondly, in the administrative properties tab and then the version area...does everyones else say it can't find nCLI.exe?
Nope i don't get any problems my end i sugest a full uninstall and reinstall of the software

Nvidia firewall (network access manager)

Does anyone know what the status of the nvidia built-in firewall software/driver problems? I haven't heard anything about it for a while. Are there any beta drivers or software out there from nvidia/MSI that work better than the released versions already available? TIA!
RB

It certainly is possible I did something wrong in my setup, but if I have so have a lot of other people. I did notice that you are running the 1.4 BIOS. It is possible that it works better with that BIOS version. Also, it may have to do with how you install the drivers. I know that in the past, the order you install them in and whether you delete the old ones first made a bid difference in if they worked correctly. I am not sure what the correct way to update the forceware drivers is nowadays. If anyone has a good guide on exactly how to update your forceware drivers, I for one would appreciate it.
RB

Cisco's AnyConnect Network Access Manager (NAM)

Similar Messages

Maybe you are looking for