Cisco SAMI (Cisco Service and Application Module for IP) modules

Hi,
Could anyone confirm whether Cisco SAMI module on 7600 supports traditional ppp over vpdn wholesale broadband?
Currently we have setup on Cisco 7200's and we want to upgrade the hardware to 7600 to scale better, MWAM module supports the VPDN configuration but its now end of sale and replacement product is SAMI whose literature is quite confusing.
Thanks
Hitesh

Try this link for more information on cards
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_white_paper0900aecd801f92c1.shtml

Similar Messages

  • One of cloud doesn't work in failover with Event ID 1205 and 1069 and unable to move services and application another node

    Any one please respond.
    I've been working on creating a windows server 2008 R2 cluster for about a month now and I keep getting an error whenever I try to add a 2nd node. I keep
    getting The cluster node is not reachable. However, when I validate the configuration, everything goes through success. I created and destroyed the cluster a couple of times, but no luck. I even re-installed Windows Server 2008 R2 on both servers, re-configured
    the iSCSI, and the same warning keeps coming up. 
    I installed a new a new SQL Server 2008R2 Named Instance on an exisiting SQL Server cluster node (Node 1 &Node2). When I try to manually fail
    over 
    the Services and applications  to another node (Node1 to node2) using Failover Cluster Manager, I get the errors
    The cluster has these Events:
    Event ID
    1069: Cluster resource 'IP Address xx.xx.xx.xx' in clustered service or application 'ClusterDtc' failed.
    Event ID 1205:The Cluster service failed to bring clustered service or application 'ClusterDtc' completely online
    or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application..
    Why the cloud server doesn’t move to node2? you can see screen shorts below.
    1.
    in system configuration-
    3. in
    system configuration---->warning--->Validate All Drivers Signed
    after creating cluster I got below errors.
    Any info you might know would be really helpful.

    Dear Ravikumar
    From clone support they given reply mail...
    mail from Ramu...
    That would be a typical work around in this situation. But what we intend to do cannot be accomplished through this work around as we need the validations to complete successfully.
     We are looking for an option either to get the driver signed or use a different signed adapter for the same. Could you please suggest us something on that line. 
    Mail from Support....
    Hello,
    Unfortunately this is not something that we would be able to do in a virtual environment; You are welcome to try different drivers however we would not be able to provide any support 
    for untrusted drivers. The only true solution would be to upgrade from a VM to a dedicated server where you would have control of all the drivers as there is no virtualization layer to
     contend with. Stepping into the territory of untested drivers for a custom configuration in a virtual environment will certainly prove to be an uphill battle.
     I would advise contacting Microsoft's support for additional assistance as they will be able to provide the most accurate information regarding this concern. 
    Regards
    Systems Administrator

  • Functionality wise comparision between ECC 5.0 and 6.0 for QM Module

    Dear QM Experts,
    Can anybody brief the comprehensive functionality wise comparision along with business benifits between ECC 5.0 and 6.0 for QM Module?  For example, what are the diffrence for Quality Notification, Inspection plan, etc and other QM functionalities between 5.0 and 6.0.
    Best Regards,
    Anand Rao

    Hi,
    http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
    This link can be used for same.
    Vishal

  • In cluster Manager there are no services and application listed on a node.. what does this mean?

    In Cluster Manager I can see two nodes listed.
    When I click on the first it lists the two SQL Server instances.
    On the other node there are no services and application listed....what does this mean?
    Mr Shaw

    Yes Instance A and Instance B will also be installed in the second node.
    Just go to configuration manager in the other node, you will see those instances in stopped state.
    Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
    the same instance.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
    Oh I get you.. 
    The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
    Thanks,
    Ben
    Mr Shaw

  • Change "Services and applications" names in failover cluster manager

    Hi. Id like to change "Services and applications" names in failover cluster manager for Windows Server 2008 R2.
    I right click on one and press rename, but when i change the name and press enter i get the message "To rename this service or application please rename the Client Access Point via its property page"
    It's important that we don't change the network name for the service

    Hi,
    Checkout this blog post
    PowerShell for Failover Clustering: Let’s Rename a Few Things
    But keep in mind if you rename the resources and you are using them in a script or backup you need to check this also with the new name.
    Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

  • "Services and Applications" is missing from the Failover cluster manager menu

    Hi,
    I am not sure this is the right group for my question, but I couldn't find anything else more suitable.
    In my Hyper-V installation (Windows 2012 Data Center), I am missing "Services and Applications". I am using Windows 8 to manage the cluster and I need this menu to import an existing VM into the cluster. How can I get this option or is there a
    software that I need to install?
    Thanks

    Repost here: http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/threads
    in the Hyper-V forum.  You'll get a lot more help there.
    This forum is for Virtual Server 2005.

  • Software and application cd for Soundblaster Live/Audigy Windows

    Hello, i have got a Soundblaster Li've Platinum 5. and a computer with Windows xp. I need the software and application cd for the Soundblaster li've/audigy to make it work as i want .Who can help me get this cd or a copy?Anton.

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum

  • Business Objects, external services and application services in CAs

    Hi All,
    right now we are developing our first eSOA Composite Application with CE and I have some questions regarding Business Objects, the import of external services and the development of application services.
    As I understood there are two ways to provide business functionality for composite applications:
    a. Import backend functionality as an external service (e.g. BAPI, RFC) at the CAF, build the application service which can be used as a callable object for UIs or the GPs
    b. Develop a local Business Object (in CAF) providing the business logic, create the application service which again can be used as a callable object. Furthermore the application service can be exposed as a Web Service (external service).
    My questions:
    1. When is it appropriate to to import external services in stead of developing local BOs?
    2. Under what conditions is it advisable to (solely) develop local BOs?
    3. What are the advantages / disadvantages regarding the reusability of the services (in option a and b)?
    Note: We are developing on NetWeaver 2004s.
    Please let me know, if you need more information to answer the questions!
    Thanks for your advice in advance,
    Regards,
    Ivonne

    Hi Ivonne,
    first of all, the CAF Business Objects (BOs) itself don't contain any business logic, they're basically just local database tables (with some CRUD services on top).
    Business logic is implemented in Application Services (AS).
    Now, regarding local BO's vs. external services, it depends on your use case. If the data is already available somewhere in your backend system it makes sense to use external services. For instance you wouldn't want to store business partners all over different composites. For data that is specific to your composite (in particular configuration, customizing etc.) and not likely to be reused by other applications you should use local BOs.
    Accessing local BO's is also much faster than calling external services.
    You can do reuse in both scenarios, since the CAF services can be exposed as web services.
    Regards,
    Christian
    Edited by: Christian Loos  on Apr 8, 2008 6:11 PM

  • Distributing Workspace Services and Application

    Hi All,
    We are attempting to distribute the Workspace services and the workspace application on 2 linux servers. The application was deployed successfully and the services installed successfully on the separate boxes. Configuration was successful on both boxes as well except for registration with Shared Services. If anyone has any information on how to point the workspace services to Shared Services on a separate box it would be an enormous help.
    Server 1
    Shared Services
    Workspace app
    Server 2
    Workspace services
    BI services
    Thank you!!!

    Any information anyone has to share about installing workspace services (core services) and configuring them would be extremely helpful.

  • IIS Virtual Directory and Application Pool for Large Images folder

    I have a large images folder used for Upload and Download with approx. 1.5 TB for a web site.
    My Website use AppPool_A.
    For performance reasons, do I need to create different Virtual Directory and different Application Pool (AppPool_B) for Images folder. Assuming, if the number of users increase in upload/download images the memory & cpu utilization will be
    more and App Pool recycle happens more often. And other impact is if Website and Images are in same App Pool, the application performance slow.
    Pls. suggest
    AnilKumar Bedide

    Hi,
    Please post on IIS fourm instead of here.
    http://forums.iis.net/
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Digusted with the lack of Customer Service and Complete disregard for Inconvenie​nces

    Its a shame I have to come here in order for my voice to be heard. I have spent many hours on the phone with technical support and customer service and it has been to no avail. As a longstanding verizon wireless customer I assumed the high level of customer service experienced there would be translated when I decided to pay MORE money and switch from DirectTV to Verizon FIOS. The last few days have proven me wrong as I still remain without internet, tv, or phone service due to a technical issue beyond my fault. I spent an hour on the phone yesterday only to find out a technician would need to be scheduled and sent to my home today. Working in sales, I have reports I must complete each day requiring use of a WIFI connection so this was already becoming an inconvenience on top of the fact I had to be available between 8-12 and miss a half day of work. Not only did the technician never show up but lied in the notes and stated he/she made an attempt to reach me by phone. My call log shows no incoming phone calls during anytime between 8-12 today. When I called tech support to check on the status of when they would be getting someone back out they informed me I would have to wait until tomorrow afternoon before someone could come out. I expressed my extreme displeasure with having to miss more time from work (which is additional money lost) and inconvienece as I would have to move my day around to find a place with free WIFI after work hours to complete my reports. Traffic in DC is not friendly and this has completely turned me off. Veriozn FIOS is unreliable and the level of service I have received to date has been sub par to put it politely. Offering me 2 pro-rated days back on my service doesn't even begin to compensate for the missed time out of work nor the gas and inconvience of running to the nearest free WIFI so I am able to do work required of me. I decided to switch to FIOS because of the verizon name assuming the quality of the product and level of service would be one I could depend on. This has been the farthest thing from what has taken place. I now have another appointment tomorrow and quite unsure if anything at all will happen. I need some somebody from corporate to receive this message as it took me forever to find this forum to express myself and try to come to some resolve to make things right in this situation. None of your customer service reps possessed any information on how to contact corporate and due to my experience I can see why. You all would likely have to hire full time stafff to accomodate the level of complaints coming in. Pending how this situation is resolved, I may or may not take my story to social media and as many review and blog sites as possible. Verizon FIOS has ruined my day and I hope that someone will care enough to make this situation right.

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • Best Web Filter and Application control for K-12 School using Chromebooks

    Sophos UTM has good education pricing and provides all this and a lot more
    Wil replace the firewall and has excellent web filtering and application control
    Also nice features for education like allowing google apps but limiting to your google domain

    We are currently using Barracuda Web Filter (410) with a Watchguard firewall. This school year we are launching Google for Education with 160 Chromebooks to start the program.
    We need to upgrade our webfilter and are considering another Barracuda as well as Litespeed, Websense and perhaps OpenDNS. 
    is there anyone who is in a similar situation that has some recommendation?
    Here are a few more details:
    School is 900+ students
    300 wired workstations
    Active directory environment
    Ruckus Wireless with 30+ access points
    This topic first appeared in the Spiceworks Community

  • Adobe Flash Builder availability, usability and application export for students?

    Hello!
    I'm a student from Estonia and i'm making my final paper for my graduation.
    What chances or possibilities do i have, if i want to acquire Flash Builder, make an application, export it and use it for my final paper (code tutorials in Estonian language) for free?

    Well, Adobe did have a program that gave free Flash Builder to students & teachers, but apparently it has been discontinued - sorry! 
    The 30-day trial versions of Flash Builder and all other CS6 and Creative Cloud tools are still available though, if that helps.
    Adobe is also currently offering free copies of Edge Animate 1.0 for everyone (permanent versions for creating interactive & animated web content), which could serve as a nice replacement.

  • HT204053 How do I use the same Apple ID and different Cloud for other devises

    Hi
    How do I use the sane Apple ID and different Icloud for other devises

    http://support.apple.com/kb/HT4627

  • Generate AS3 service and value classes for Blaze -- without FB4

    Is there a way to generate service and value object classes (like Flash Builder 4 does) from a command line -- or more specifically from within Maven?
    We have a Java/Maven back end and wish to generate the action script 3 classes as part of the build process rather than interactively from within an IDE.

    It should be easy to code something to parse the java classes in Adobe Air and create the Blaze objects.  I did it once didn't take too long.

Maybe you are looking for