Cisco Secure ACS 4.2 for Windows web-based Admin Console log in problems

To Whomever Can Assist,
I am running two deployments of Cisco Secure ACS for Windows 4.2 and I can login into the admin web-console just fine. However, when I create a new or test user that mirror my configuration that user cannot login to the admin web-console. The user can login it to devices with the appropriate privileges, but can't administer his/her account within ACS. This has proven very problematic and needs a remedy. Thanks for the assistance.

Bradbryant.dhs,
Where are you creating the new admin user who should have access to ACS web gui under internal users or administration.
Internal user and ACS administrator accounts are completely different.
Adding administrator account
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4-2/user/guide/ACS4_2UG/Admin.html
Regards,
Jatin Katyal
** Do rate helpful posts **

Similar Messages

Advice for Buying Cisco Secure ACS 3.3 for Windows

Just need advice on what other things I NEED to order apart from the Windows server when I want to iplement ACS and I want to use CISCO SECURE ACS 3.3 FOR WINDOWS
Hope someone will help

Hi,
This is all what you require:
Supported Operating System
Cisco Secure ACS for Windows Servers 3.3 supports the Windows operating systems listed below. Both the operating system and the service pack must be English-language versions.
Windows 2000 Server, with Service Pack 4 installed
Windows 2000 Advanced Server, with the following conditions:
with Service Pack 4 installed
without features specific to Windows 2000 Advanced Server enabled
Windows Server 2003, Enterprise Edition
Windows Server 2003, Standard Edition
Note The following restrictions apply to support for Microsoft Windows operating systems:
We have not tested and cannot support the multi-processor feature of any supported operating system.
We cannot support Microsoft clustering service on any supported operating system.
Windows 2000 Datacenter Server is not a supported operating system.
Please refer to the following link for more information:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/win33sdt.htm
Thanx & Regards

Delete proxy config on Cisco Secure ACS 4.1 for Windows ?

We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2.
We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
pressed the Network Configuration button,
saw the Proxy Distribution Table
clicked (Default)
moved ACS1 from the AAA Servers column to the Forward To column.
So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.

Hello Jeffrey,
By default the ACS 4.x Proxy Distribution Settings should have the ACS entry for itself on the Forward To box. Your ACS1 entry should be on the Forward To box.
The Internal Error message on the ACS should be highligthing a different issue on your ACS1. Also, the message stating that we cannot have zero servers on the "Forward To" box is expected.
Set your ACS1 for Full Logging Detail (System Configuration > Service Control) and configure the ACS1 entry under the Forward To box. Recreate the authentication issue and collect a package.cab file. If you have an ACS for Windows, under the ACS Installation folder look for the CSAuth folder > Logs and share the auth.log file with a failure timestamp for us to review the ACS logs when failing with Internal Error.
If this was helpful please rate.
Regards.

Cisco Secure Access Control Server for Windows 3.0

I have to rebuild a server using Cisco Secure Access Control Server for Windows 3.0 ... I cannot locate this software under "download software" in cisco.com ..
where can I download a copy for Cisco Secure Access Control Server for Windows 3.0 ?

Hi,
You can not download the ACS windows Solution engines softwares from the cisco.com > download pages as these s/w are not available there. You can only download patches and remote agent software.
In order to get any ACS software/ upgrade assistance you need to open up a TAC case.
Also, ACS 3.0 is not supported by Cisco anymore..getting support for this version or any 3.x is not possible.
HTH
Regards,
JK

Does Embedded OC4J has a web based admin console ?

Hi
Thank you for reading my post
does embedded OC4J has a web based admin console ?
i tried to open the /em context and it said that the page not found.
if it has no Admin console , it ir t possible to install an admin console for it ?
thanks

Hi,
yes, it has. You need to start embedded OC4J as stand-alone from the jdev-home\j2ee\home using the java -jar oc4j.jar command. You can then launch it and access it via port 8888 and issue
http:://....:8888/em
The embedded server does not use the enterprise manager screen because the configuration is kept in the JDeveloper_home\jdev\system...\j2ee...\embedded...\config directory
Frank

Cisco Secure ACS 4.1 with Windows Database

I have ACS 4.1 integrated with Windows Database (check mark in allow Remote DialIn).
When we terminate a employee do I have to also delete their ACS User Profile?
If I delete the user in AD will they automatically delete the user in ACS?
Where can I read more about this?

Hi,
If you delete the user in AD, then it would not authenticate the user even if the dynamic mapped user exists in the ACS database, as the password would not be verified from the AD for the user.
The dynamically mapped user entry would still exist in ACS and would not get deleted if the user is deleted from AD.
tnx
somishra

With Cisco Secure ACS For Windows TACACS+, authentication fails with AD

I am setting up a Cisco Secure ACS 4.2 server to act as a TACACS server for Switches and Routers I am using Windows 2003 server for the ACS,
and a Windows 2003 Active Directory server. The AD server is fine, as it is used for many other things.
I have set up ACS as defined nit he installation guide, including all the steps in the 'Member Server' section of the install guide
when using AD as an external database (i.e. setting up the services to run with a domain admin account, setting up a machine called 'CISCO'
on the domain etc).
I've set the unknown user policy to use the Windows database if the internal database doesn;t contain the user details.
If I add a user to the internal database, the authentication goes through fine, with an entry in the 'Passed Authentications' log,
02/24/2010,05:07:03,Authen failed,eXXXX,Network Administrators(NDG) ,X.X.X.X,(Default),Internal error,,(geting error message as INternal Error)
I've scoured google etc, and just cannot come up with any reason why this should be happening.
I've followed all the install guides to the letter. I need to get this up and running as soon as possible,
so am looking forward to finding out if anyone can help me with this one!
THanks and regards
Sharan

Hi Jesse,
Thasts a great answer and Soution.
My previous version was 4.2 and it was installed on 64 bit machine hence getting internal Error.
After this answer i have upgraded it to ACS4.2.1 and its started working fine
Thanks very much for the help
Dipu

Upgrade path for Cisco Secure ACS 4.X Solution Engine 1113 Appliance.

Hello,
I am having Cisco Secure ACS 4.X Solution Engine 1113 Appliance, and is running on version Cisco Secure ACS Release 4.1(1) Build 23 and now want to upgarde it to the latest version. Need to know the upgrade path for the same. As per my information ACS 4.1(1) runs on windows server and releases post to 5.X uses Linux. Please guide how can i upgrade Appliance 1113 from 4.1 to 5.x

Hi,
Cisco ACS 1113 appliance doesn't support ACS 5.x version. 1113 appliance supports till ACS 4.2.1 version.
Cisco ACS SE 1120/1121 appliance models are required for ACS 5.x
The upgrade path for ACS 4.1 to 4.2.1 version can be found in the following link :
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1237189
Regards,
Karthik Chandran
*kindly rate helpful post*

Reporting & Audit Compliance Solutions for Cisco Secure ACS

The Cisco Secure ACS Access Control Server is probably the worlds best selling remote access security solutions and its quite likely that you're already using it! Wouldn't it be great to know exactly what it was doing? Further still, when you have to provide audit documentation regarding your policies and how effective they are, how long does this take and what valuable data remains locked inside the ACS database and logs?
extraxi offer a range of products that deliver a complete solution for harvesting, managing and analyzing your ACS/SBR log data to meet the increasing demands for regulatory compliance (SOX, COBIT) and overall enterprise monitoring and security.
We are proud to supply customers including Intel, Ford, Lego, T-Mobile, US Dept of State, US Army, British Telecom, First Energy, TNT Express, Kodak and JP Morgan and many more so why not take a look at our industry leading solutions and evaluate the benefits for your organization...
Featured Products:
* aaa-reports! enterprise edition - Automated Reporting
The best reporting system for Cisco Secure ACS and Funk SBR just got a whole lot better! Improved reports, enhanced filtering and query builder and now with up to 48GB internal storage based on SQL Server technology makes this the ideal solution for large or complex AAA deployments and those that need the additional functionality from the standard aaa-reports! tool.
With aaa-reports! enterprise you have a complete application for reporting including many canned reports (each with flexible filtering options) and a point-n-click query builder for designing custom reports.
For historic trending, forensics and audit compliance there simply is no better reporting application for Cisco Secure ACS or Funk/Juniper SBR.
* csvsync - Automated ACS Database & Log File Collection
csvsync allows you to download CSV log data (RADIUS, TACACS+, Passed/Failed Attempts etc) directly from any number of Cisco Secure ACS servers (Windows & Appliance) via http(s). Version 3.0 now supports the collection of ACS database itself for import into aaa-reports and detailed reporting based on the ACS security policies. Simple, secure and efficient, csvsync is the best solution for harvesting log data from your Cisco Secure ACS servers.
Download fully working 60 day trial versions at http://www.extraxi.com/rq.asp?utm_source=technet&utm_medium=forum
Fore more information please visit http://www.extraxi.com/?utm_source=technet&utm_medium=forum

bump

Patch rollup for Cisco Secure ACS 4.2 fails.

I've got 2 freshly installed ACS 4.2 for Windows servers and I need to apply the latest patch rollup before I build the configurations. I stopped the ACS services and ran Acs-4.2.0.124.15-SW.exe to install the patches. The application begins running fine but fails on upgrading the database and then none of the ACS services would start. I was able to restore the files from the backup that runs with the patch utility and get ACS functioning again. What am I missing - does the patch rollup require any specific Microsoft Patches to be installed or something like that?
Thanks

Thanks for the feedback. I attempted the patch rollup install again and it failed in the same place - on the database upgrade. I did think of one thing. Do I need to have my antivirus/protection services disabled prior to installing the rollup?
Also my versions are as follows:
Server OS - Windows Server 2003 R2
Cisco Secure ACS - 4.2.(0) Build 124
Thanks,
Richard Jaehne

With Cisco Secure ACS 4.2 User accounts gets locked at first instance of wrong credentials even if configured for 3 attempts

Hello Everybody,
I am working with Cisco Secure ACS 4.2 and it is integrated with Active Directory at a Windows 2008 R2 functional level, user accounts that are set with lockout parameters (3 incorrect attempts) are locked out prematurely after the user enters the wrong credentials just once, the integration is done via LDAP.
I wonder if anybody has any idea why this is happening, because when I connect to a Cisco device or VPN, and type my password wrongly, on the Active Directory I get extra bad password counts.
Thanks in advance and regards....

Hello Scott,
Thanks for your answer. However we checked the ACS logs and it shows that we entered bad credentials just once, but in the Active Directory our account sometimes is blocked because we get at least 2 and sometimes 3 failures. This problem is only presented when we authenticate Cisco devices or through VPN, in normal circumstances, when users enter bad credentials on their computers, it works fine.
Thanks and regards...

Troubleshooting Cisco Secure ACS on Windows - Q&A clarification.

In a Cisco Press publication "Troubleshooting Cisco Secure ACS on Windows" (http://www.ciscopress.com/articles/article.asp?p=474238&seqNum=6&rl=1), I read the following question:
How can I disable the users' option to change the password by using Telnet to access the router?
It has an answer describing certain details. However, the question itself is not clear to me. Could someone explain them a little more clearly?
Thanks.

At the command prompt on a router its possible to start a password change request over TACACS to the ACS server.
I think you enter an empty password twice as I recall.
This can cause problems if users change their password on a "slave" ACS which is then replicated to from a "master" thus setting the password back to its pre-changed value.

Cisco Secure ACS with UCP assistance and enable password

I am running Cisco Secure ACS version 4.2 running on a
Standalone Windows 2003 Enterprise 2003with the lastest
windows service pack and update. Secure ACS is running
fine and I can authenticate with Cisco routers and
switches. The Windows 2003 server is also running Microsoft
IIS Server. In other words, the IIS server and Cisco
Secure ACS is running on the same windows 2003 server.
I am trying to get Cisco User-Changeable password to work
with Cisco Secure ACS. I followed the release notes lines
by lines and the work around provided below:
Also server require more privileges for the internal windows user that runs CSusercgi.exe.
The name of the windows user that runs UCP is IUSR_<machine_name>.
Workaround steps:
1) Install UCP 4 on a machine that runs IIS server.
2) Open IIS manager
3) Locate Default Web Site
4) Double click on the virtual name 'securecgi-bin'
5) Right click on CSusercgi.exe and choose Properties
6) Choose 'File Security' tab
7) Choose 'Edit' in 'Authentication and access control' area
8) Change username from IUSR_<machine_name> to 'Administrator' and enter his
password (make sure that 'Integrated Windows authentication' is checked)
I still can NOT get this to work. I got this error:
It says:
The page cannot be found
The page you are looking for might have been removed,
had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
I modified everything in the Windows 2003 to be "ALLOWED" by
EVERYONE. In other words, there are NO security on the windows 2003.
It is still NOT working.
The other question I have is that can Cisco UCP allow user
to change his/her enable password?
Can someone help? Thanks.

Yes bastien,
Thank you.
But one thing more i want to know that in its Redundant AAA server, when i try to open IIS 6.0 window 2003; it prompts for Username and Password.
I've given it several time; also going through Administrator account with administrative credentials but it always failed.
Any suggestions/solution/?
This time many thanks in advance.
Regards
Mehdi Raza

EAP-TLS witch Cisco Secure ACS

Hi everyone,
we have implemented wpa/leap in our WLAN. We would use certificates for machine authentication. There is a Cisco Secure ACS Server 3.3 installed.
Is it possible to use the ACS self generated certificate without a CA ?
The examples I found on the web describes only the configuration with CSACS with Microsoft CA.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a0080205a6b.html
We use Cisco AP1231/AP1232 with 12.3.4JA.
I think for machine authentication we have to install a CA. Let me know, how you think about that issue.
Armin

There are no much options on Client side: MS PEAP, EAP-TLS, EAP-MD5. ACS version 3.3 can generate self-signed certificate (for itself) without the need to install separate CA server. So I'd recommend you to use MS PEAP (PEAP MS-CHAPv2) with self-signed certificate on ACS.

Cisco Secure ACS 4.0 Solution engine problem

Hi,
I have a probleme with a Cisco Secure ACS 4.0 Solution Engine (CSACSE-1113-K9).
I try to power up the engine, but the light in the power button stay blinking all the time. Anyone have a idea why ?
Last week, I boot it for the first time (It's brand new), every things goes fine.
I made " shutdown " then wait the message to press 4 seconds power button to turn it off. This morning, nothing come up.
I see one thing in the console "Press <SpaceBar> to update BIOS." after that, blank. No bios detection, no harddrive dectection, no windows boot.
Any idea ?
Thank you

No, I'm sur.
Then we have version 1113 of ACS.
See: http://www.cisco.com/application/pdf/en/us/guest/products/ps6731/c2001/ccmigration_09186a008068f7bd.pdf
Page 32(1-8) #2.
I let the engine off about 6hours after my first post, then I try back. The engine start.
What can cause this problem ?

Cisco Secure ACS 4.2 for Windows web-based Admin Console log in problems

Similar Messages

Maybe you are looking for