Cisco secure desktop and failover configuration

I wonder if secure desktop configuration and dynamic access policy DAP configuration is replecated between the primary and secondary firewalls when saving the configuration ?

Yes. It does replicate sdesktop.xml and dap.xml
Anton
Sent from Cisco Technical Support iPad App

Similar Messages

  • Cisco Secure Desktop access denied and critical failure errors

    Hi
    Please can you assist me with the following Cisco Secure Desktop error. 
    "Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.
    Cisco Secure Desktop must run and validate your system to proceed. Please verify your browser settings and configuration and retry."
    Under "Weblaunch" Platform detection, Sun Java and Java Detection are ticked.  The other items are unticked.
    Thank you in advance.

    I'm having the same problem with Lion 10.8.4
    I've tried three different browsers with similar results.
    Firefox 22.0
    Chrome Version 27.0.1453.116
    Safari 6.05
    Any ideas?  I know we have the Secure desktop set to scan for antivirus for all connections.  I know that my AV is on the list and supposedly compatible.

  • Weblaunch cisco secure Desktop mac os x is not working

    Hi there,
    The weblaunch for Cisco Secure Desktop is not working with MAC OS X 10.7.5 on Safari and Firefox (latest one).
    On Windows ist it working properly.
    Java is enabled on the browser. With the local installed hostscan it works, but how can the weblauch be enabled for MAC OS X?
    Here the error:
    Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.Cisco Secure Desktop must run and validate your system to proceed. Please verify your browser settings and configuration and retry.
    Thank you,
    Norbert

    We are matching the group policy, I can connect from the Mac using the AnyConnect client so the DAP is working correctly now. I have the DAP connection meathod as both default webvpn or clientless.
    Only things I'm checking for in DAP is group policy, then OS X and Antivirus for MAC. That's it, yet WebVPN does not launch, i'm stuck at the Access Denied, system failed to be validated by Cisco Secure Desktop. I enabled the Java Plugin when prompted...same issue.
    This doesn't work in Safari or FireFox.
    Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.Cisco  Secure Desktop must run and validate your system to proceed. Please  verify your browser settings and configuration and retry.

  • I received the following Cisco Secure Desktop error when trying to

    I received the following Cisco Secure Desktop error when trying to use WebVpn.    "Access Denied Your system failed to be validated by the Cisco Secure Desktop and will not be granted access. Critical failure. Cisco Secure Desktop must run and validate your system. When I go verify Safari settings under "Weblaunch Platform detection, sun Java and Java Detection are all clicked.  I even change the DNS in safari system preferences, to no avail.
    My system is MacBook Pro 2.8 GHz Intel core i7 with 16 GB 1600 MHz DDR3.
    Thanks.

    Sorry I don't really understand.... there are no partitions on the drive.  How do I repartition it?
    And should I use "erasing free space" or "erase" for wiping clean my drive of everything?  Erase seems to be faster last tiem I tried.
    Thanks!

  • Cisco Secure Desktop Space Requirements

    Does anyone know what the space requirements are for the Cisco Secure Desktop configuration.  Each time I try to configure CSD it tells me "the disk is (or was) full during extraction."  Looking at my space in flash there is more than enough space unless Im missing something.

    Hi Bro
    When a Secure Desktop environment is created, an encrypted file space is generated in the Cisco ASA. The file space starts small and grows to a maximum of 2GB, depending on the applications loaded from their default locations whilst operating within Secure Desktop.
    For further details on this, please kindly refer to https://supportforums.cisco.com/docs/DOC-1247#Q_How_big_of_a_partition_on_the_hard_drive_does_CSD_create
    P/S: If you think this comment is helpful, please do rate them nicely and select the option "This Question is Answered"

  • CSD - Cisco Secure Desktop - updates needed !

    Hi,
    Does anyone know if/when there will be an update to the Cisco Secure Desktop. Latest version available is 3.1.1.45 dated October 2006. This version is massively out of date in terms of AV clients, FW's and there is no Vista support !
    Am i missing something here - has Cisco stopped developing this product ? Is there another product that has superseded this ?
    Any advice much appreciated,
    cheers
    Chris

    Hi Joe,
    Thanks for your reply.
    Is there any mechansim for us to edit the config files for CSD so we can manually add in AV products such as Kaspersky, AVG7.5 etc etc. We are finding that we are having to insist people use a narrow range of old product versions in order to meet our posture detection policies. Surely regular AV and FW additions and updates are essential for a product such as CSD.
    Many thanks
    Chris

  • Cisco Secure Desktop not loading on MB Pro

    Hello
    I have a MacBook Pro that I use for work, and am trying to access my  work VPN via the Cisco Secure Desktop.  Up until approx two weeks ago,  it worked fine, but now I get the following message
    I have Java 7 update 25 installed, and am using Firefox Mac version 22.
    Any help is appreciated !
    Thank You

    I am seeing similar behavior. Hopefully what I'm seeing isn't drastically different, so as not to have hijacked your thread. (I hadn't keyed into the IE connection until you mentioned it, but once I check my logs, IE seems to be the common factor.)
    Any of my VPN users with AnyConnect 3.1.3103 on Windows 7 (64-bit specifically) and IE 10 fail to pass my DAP policies. A virtually identical host with Windows 7 64-bit and IE 9 passes DAP. (I'm not performing any DAP check on IE at all.) After working on a little testing of my own, I intend to file a TAC case. If something interesting develops either in my testing or the TAC case, I'll update here.

  • What is the cisco ironport C680 and M680 configuration backup file size?

    what is the cisco ironport C680 and M680 configuration backup file size?

    Size of the XML itself?  That is going to vary based on what you have configured, total lines of code, and # of appliances you may/may not have in cluster.
    M680, based on SMA as stand-alone, should be similar --- you are probably looking @ < 1 MB... 
    Looking @ my test environment, in which I have a nightly cron job set to grab a backup of...
    -rw-rw----  1 robert robert 161115 Sep 26 02:00 C000V-564D1A718795ACFEXXXX-YYYYBAD60A5A-20140926T020002.xml
    So, 161115 bytes = .15 MB
    -Robert

  • Add/remove applications from cisco secure desktop

    Is there anyway to add and remove applications on the actual desktop of the CSD? I have a client that would like to remove IE from the desktop and add a shortcut to RDP. Is this possible. I have a feeling it isn't, I figured I'd ask.
    TIA,
    Dan

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • Cisco call manager Network Failover Configuration

    Hi all,
    I have a cisco call manager 6.0.
    The server is configured and is functioning very well.
    Only  today I realized that the server MCS has two NIC and there is the  possibility to configure a networ failover by cli interface.
    Now the question are:
    is it possible to configure this function now without problem?
    if yes what are the ordered steps to follow?
    Thanks all.

    Hi
    you can use EtherChannel, 2 phisical ports as 1 logical

  • What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

    Hello All,
    UCCX version 8.0.2.11005-20
    UCCX is running in HA mode.
    Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
    So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
    Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
    When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
    Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
    Any thoughts would be much appreciated!
    Thanks in Advance,
    Matt

    Has your problem cleared up?  Did you do anything, such as a reboot or open a TAC case?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Network interface cards tested with cisco agent desktop and CTI Toolkit Desktop Silent Monitor

    Hi Guys,
    My Customer is testing the Silent Monitoring, but, not is working. He is using the NIC Intel 82579LM, version 17.4 - 64 bits. I read the documentation the link http://www.cisco.com/en/US/prod/voicesw/custcosw/ps5693/ps14/prod_system_requirements0900aecd800e3149.pdf
    but, the reference is to version 7.1.3. My Customer work with UCCX and CUCM version 8.6. Are there one specific documentation about this version? The link don´t show the NIC tested by my Customer
    Thank You,
    Best Regards,
    Wilson

    Hi
    I've done lots of deployments of this on UCCX, and still haven't found a NIC that doesn't work. I'm sure there are some, but they appear to be very rare.
    If you can sniff the UDP when a call is in progress, it can work. If you can't, then it's usually down to configuration - e.g. non-phone-connected PCs, span-to-PC-port, PC vvvlan access, etc etc.
    Aaron

  • Cisco Security Manager and User-aware firewall rules

    Hello !
    I have a firewall ASA which is managed with CSM and I try to create some user-aware rules. To do this, I need to match CSM with an Active Directory server.
    I added an AAA server group matching my Active Directory server in the Identity Setting menu from Security Manager Administration and when i click on "Test", I obtain the error message "Unsuccessful Bind prevented to fetch data, please reconfigure AAA server".
    What can I do to solve this problem ?
    Thank you !
    Stephane

    You can contact your local AM to get an evaluations version, this is related to the new 'restricted' downloaded access on CCO. You need to have a service contract assocaited for that 'specific' product to download software (I know it does not make sense in case of an evaluation).
    And you also have the following alternate:
    Note:
    This download does not include  CiscoWorks Resource Manager Essentials (RME). For customers that wish to  also evaluate CiscoWorks RME or that prefer a media format rather than a  large download, an evaluation DVD can be ordered from Cisco  Marketplace. At http://www.cisco.com/pcgi-bin/marketplace/welcome.pl,  navigate to the Collateral and Subscriptions Store and search for part  number EVAL-CSMGR-4.0.
    Regards
    Farrukh

  • Cisco sx80 Layouts and Displays configuration

    Hello everyone
    I am installing a sx80 cisco telepresence, it has 3 dispays, two connected to HDMi ports and one conneceted to DVI port.  I have a question in order to know if we have some way for modify a layout, there are 5 or 6 layouts by default, but Can we modify these ones?  Other question is if there is some way for configuring a display for receiving content just when remote site send content and the others two shows selfview, when remote site is not sending, I want that 1 display shows remote site and other two displays continue shows swlfview.
    Thanks

    You can modify the layout with the use of the TC Console software available here.
    We don't actually have an SX80s but I know that the C series with dual display unit out of the box, 1 display is used for Presentation, and the other is used for Remote with Local as a PiP. We dislike this setup however, and have Local on one screen and Remote on the other, then when a Presentation is shown, this appears on the Local display, and the the Local selfview appears as a PiP on the Remote screen. I'm sure something similar could be achieved on the SX80

  • Cisco Secure ACS and Windows NLB

    Hi,
    I have two ACS servers and have been trying unsuccessfully to setup Windows NLB for them. I can successful setup the NLB but ACS won't respond on the clustered IP. Other services running on the clustered IP will respond so I believe the NLB is working correctly.
    Has anyone had any success with ACS and Microsoft NLB? I can?t find any documentation to suggest that they are incompatible but I think this may be the case.
    Thanks,
    Neil

    Neil,
    ACS is not tested with NLB but if cluster hosts are attempting to communicate with the ACS using their clustered IP then ACS should reply.
    Do you see any hits on acs ? If you sniff the acs interface, what is the source IP address ? Is it clustered ip or clustered host IP ??
    Also on acs --->Network configuration add aaa client with host IP and clustered ip . Now see if acs responds to NLB.
    Regards,
    ~JG

Maybe you are looking for