Cisco Security Manager is vulnerable to CVE-2014-0160 - aka Heartbleed

Dear All,
              We have CSM 4.4.0 SP2 patch 1 installed with no default configuration.
According to cisco, CSM is under Vulnerable Products list with cisco bug ID CSCuo19265. 
Do I need to take any action for my CSM ?
Thanks & Regards
Ahmed...

Im not sure if that's true. the release notes don't state anything about fixing that big. and also looking at the opensource licenses PDF for 4.6.0 it states OpenSSL version: 1.0.1e (which is the same version as 4.5.0 and all versions 1a through 1f are vulnerable).
I would find it very odd they didn't fix it considering it was released just yesterday.

Similar Messages

  • Cisco IOS XE is vulnerable to CVE-2014-0160 - aka Heartbleed CSCuo19730 on Cisco 4500E IOS XE?

    Hello Experts,
    I need to find out what exact IOS XE software version on Catalyst 4507E will affect by Heartbleed.
    Cisco WS-C4507R+E
    WS-X45-SUP7-E
    Thanks in advance.

    @apieper, looking at the bug details, it doesn't look like you are affected.
    Conditions:
    Cisco IOS XE devices running release 3.11.0S, 3.11.1S or 3.12.0S and with the WebUI interface over HTTPs enabled. No other versions of Cisco IOS XE are affected.
    Devices with the WebUI interface enabled and using HTTPs as transport protocol will include the following configuration:
    transport-map type persistent webui http-webui
    secure-server
    ip http secure-server
    transport type persistent webui input http-webui
    Devices running IOS XE release 3.11.0S, 3.11.1S or 3.12.0S but WITHOUT the WebUI interface enabled, or with the WebUI interface enabled but NOT using HTTPs as transport protocol are NOT AFFECTED by this vulnerability.
    Devices running IOS XE release 3.11.0S, 3.11.1S or 3.12.0S and with the HTTPs server enabled (by including in their configuration the line "ip http secure-server") are NOT affected. Both the HTTPs server and the WebUI interface need to be enabled for a device to be vulnerable.

  • Cisco Security Manager IOPS for Storage (VM Deployent)

    Hi,
    I've been asked by a client about the Cisco Security Manager requirement to have 1TB of storage for events and another for archiving.
    They wish to know the IOPS requirement for this storage. Please could anyone assist in this ?
    Many thanks,
    Mark                 

    Hi,
    I'm not sure that I can really help you, but I can verify that on my CSM 4.5 server which is running normally, that service has a starup type of automatic and is in the "Started" state.
    You may want to check your system and application event logs to see if there are any messages that could explain why it stopped.
    Regards,
    Matt

  • Unable to Install Cisco Security Manager

    Hi,
    I facing issue when trying to install Cisco Security Manager in my Windows Server 2008.
    I had attach the print screen of my server version and error message.
    The error message had mention that it was due to unsupport OS or terminal service.
    But, i check and it show that my Window Server was the recommend version and no terminal service been enable.

    Hi Vincent,
    Please understand that Window Server 2008 R2 Enterprise Server is not same as Windows Server 2008 Enterprise Server. I had faced the same problem earlier. The R2 version is supported only CSM 4.1 onwards.
    Regards,
    Chetan

  • Cisco security Manager Backup error

    i  am getting  the below  error  after the backup in Cisco Security  Manager 3.2
    [Sun Dec 20 00:00:05 2009]  ERROR(313): D:/backup.LOCK file exists
    Most probably another backup process is running
    [Sun Dec 20 00:00:05 2009]  Backup failed: 2009/12/20 00:00:05
    i have deleted the backup.LOCK file and tried  it is giving the same error.
    any one help me in this.
    thanks in advance.

    Update:
    WHen performing the same action through the client interface, rather than from the server interface the backup has appeared to work.
    Is this a feature?
    Needless to say I was able to run a backup.
    Steve

  • Cisco Security Manager Local RBAC Authentication Radius assign user role

    Is it possible to use Cisco Security Manager with local RBAC, authenticate the user to Radius and retrieve it's role from Radius. Getting the authentication to work isn't the problem, but is it also possible to return the role the user has (i.e. Super Admin) via Radius, without having to create all the users one-by-one in the local CSM database with the correct role.
    Can i use a certain Cisco-AV-Pair attribute to return the user role via Radius?

    I just got asked to look at the same situation by one of our security people.
    We have exactly the same problem but it reports a username of "*****" and we are running CSM 4.7 (upgraded last week)

  • Cisco Security Manager logging

    Hello Experts,
    Can anyone help me, how can i configure CSM 4.0 to capture its logs.
    I want to read logs of Cisco Security Manager itself, so how can i do that & in which location it captures it log file.

    There are multiple server logs (47 of them on my CSM 4.4 setup) all stored on the server itself and accessible from Windows Explorer.
    You will need to RDP to the server and look at the log directory under the path where you installed CSM.

  • Cisco Security Manager (CSM) License Problem

    Hi All,
    We have CSM V3.2 with Professional license edition and support 50 devices. It's installed properly in the Cisco Security Manager client as appeared in the attachement but the problem is in the server administration- license management which doesn't include any records for license (see attachment).
    I tried to upload the .lic file by clicking the Update button in server administration but an error message appeared stated that the license file is corrupted although it's installed properly in CSM client!!!
    Could you please advise what's the problem and what should I do?
    Thanks in Advance!

    Sorry but Cisco seems to have removed that product bulletin from cisco.com.
    Your reseller can use Cisco Commerce Workspace (CCW) to order the correct part number for your CSM installation. There is a unique number for each licensing level and/or upgrade.
    For instance, for a 10-device standard license, the support would be part number CON-SAS-CSMST10K.
    For the 100-device Pro license, the support would be CON-SAS-CSMPR4K9.
    The reseller needs to adjust the support term (12-60 months) to suit when ordering.

  • Import Network host objects to Cisco Security Manager

    Is it possible to import complete lists of Network Hosts objects to Cisco Security Manager?
    Exporting the hosts already defined in the ASAs is easy but how to import them in CSM??
    Thanks

    No hostnames discovered go the Policy Object Manager (nor to the Access rules), only group-names (there's a bug in ASAs related to single host names too). The way CSM handles single hosts is previously creating them, so when we later discover devices, the single hosts names set in the discovered device are not considered, only their IP addresses; then you can see that in the discovered access rules CSM shows the hostname as the previously defined ones in the Policy Object Manager. If you dont define those hostnames before the device discovery, you will only see IP addresses, no hostnames, no matter they are set in your firewalls.
    Imagine discovering a couple FWSM modules with 500 access rules, and you only get to see the IP addresses of the 2,500 hosts on your network. And you have all those hosts already defined in your FWSM firewalls, when you log via ASDM you view your hard created rules with hostnames, and when you log to CSM you only view IP addresses. The clients get very disappointed with CSM after that, and discard it. The bigger the network, the faster they reject CSM.
    The only way to add hosts in the Policy Object Manager is 1 by 1. But as this may have happened to more than one company and considering how easy it is to code a feature like that, I assume that it's possible to import a complete list of single hosts to CSM.
    is that really possible? it should be.
    thanks for the replies so far

  • Cisco Security Manager, need global search, i.e. filters are not good at all

    Does anybody know how to work effectively with security manager and filtering?
    It is extremely time consuming and frustrating to work with Cisco Security Manager in regards to search for entries or filter. I have not been able to find some kind of global search, is there?
    How do other people cope with this?

    It appears to have been a temporary issue as the backup is running fine again now... closing the thread.

  • Catalyst 3750x and 4510R and Cisco Security Manager

    Hi,
    I just downloaded and install trial (evaluation) version of Cisco Security Manager 4.3. In supported devices list I saw Cisco Catalyst 3750 and 4510R but when I try to add it I got for 3750:
    Invalid device: Device is a switch and cannot be mapped to a Generic Router model.
    Please verify the selected device type, OS version and device configuration
    For 4510R:
    Invalid device: Version 03.03.00.SG (N/A) is not supported for the device type of Cisco Catalyst 4510R Switch Please verify the selected device type, OS version and device configuration
    We need to make a purchase decision but for it we need to import all of our devices and perform some tests.
    Thanks in advance for your replies!
    BR, Vasily.

    I figured this out on my own -- change Compatibility mode of the installer to be Windows 8 (which is same OS version as Windows 2012) and it installs just fine.

  • Cisco Security Manager evaluation

    How to download CSM software for evaluation ? CSM Q&A state -
    Anybody with a valid cisco.com account can download Cisco Security Manager and use the software for up to
    90 days in evaluation mode. Visit  http://www.cisco.com/go/csmanager  and select the “Download Software”
    But when I click "Download" I get "To Download this software, you must have a valid service contract associated to your Cisco.com user ID."
    Help, plz.
    BR, Oleg.

    You can contact your local AM to get an evaluations version, this is related to the new 'restricted' downloaded access on CCO. You need to have a service contract assocaited for that 'specific' product to download software (I know it does not make sense in case of an evaluation).
    And you also have the following alternate:
    Note:
    This download does not include  CiscoWorks Resource Manager Essentials (RME). For customers that wish to  also evaluate CiscoWorks RME or that prefer a media format rather than a  large download, an evaluation DVD can be ordered from Cisco  Marketplace. At http://www.cisco.com/pcgi-bin/marketplace/welcome.pl,  navigate to the Collateral and Subscriptions Store and search for part  number EVAL-CSMGR-4.0.
    Regards
    Farrukh

  • Cisco Security Manager Advice

    Hi,
    I'm looking into Cisco Security Manager. From what I understand you can monitor and manage Cisco security appliances. I'm interested in the monitoring of our Cisco ASAs - specifically, monitoring VPN sessions and their  trending over months at a time and I would like to monitor other Cisco devices on the network for link problems/performance and such - I don't want to use Cisco Security Manager as a management point. Would Cisco Security Manager not be the right tool for this?
    We have SolarWinds and I've heard that you can assign UnDPs(Device Pollers) to devices you want to monitor, including ASAs and these pollers can give you trending for VPN sessions with graphing. I just want to make the most of our budget dollars.
    Any advice?
    Thanks, Pat.

    CSM 4.3 and above can be used to monitor VPN sessions on Cisco ASAs. You can definitely use CSM as a monitoring only solution for ASAs (without using it for management). You can also explicitly disable policy change privileges for all admins so they do not modify stuff by mistake. Note however that CSM is primarily focused on end-to-end management scenarios (including policy change, troubleshooting, reporting, etc). So you may not find all the bells and whistles in CSM for monitoring scenarios that you may find with some of the pure monitoring only solutions.

  • Cisco Security Manager CLI change

    Hi Guys,
    IS there any way to detect a CLI change in Cisco Security Manager without having to manually rediscover policies from CSM
    Can it be automatic?
    Regards

    Following link may help you
    http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/defapset.html

  • Cisco Security Manager Notification

    Hi all,
    In cisco security manager, how to change the administrator email address ?
    I am using version CSMrg3.1.1
    thank you

    Following link may help you
    http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/defapset.html

Maybe you are looking for

  • SSRS Parameters using SSAS Tabular model get cleared

    I have an SSRS report that uses data from a SSAS Tabular model.  In the query designer, from the calendar dimension I choose a "Date Inclusive" filter and make it a parameter. I also choose to add another filter using and Organisation Unit dimension

  • PARCONV phase Index could not be created ERROR

    Upgrading Solution Manger 3.2 to 7.0  Windows Nt SQL Server 2000 We are in teh PARCONV phase now and getting errors regarding tables with missing indexes. Example from PARCONV.ELG file: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  • How can I install the Flash Debug Player in Internet Explorer 10?

    I just downloaded the Flash Debug Player 11.4.402.287 from http://download.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_ax_debug.exe - however, trying to install it merely shows a message box saying The installation encountered errors: Y

  • Excise values error in migo

    Dear Friends,                 this is chandra shekar , here i had one problem in migo transaction excise values are capturing in wrong way for example the  material price is 100 rs BED is 8 % that is 8 rs when doing goods receipt for this material in

  • How to refund the security deposit?

    When I was setting up a new line I needed to pay $125 for the security deposit. The sales people told me it would be refunded after 6 months of use in form of credit in the billing cycle. But after 7 billing cycles, I still havent got any and still n