Cisco Security MARS 110 error - sfdisk:Cannot open /dev/sda for reading

HI when installing the MARS ver 6.0.1 we are getting this error sfdisk:Cannot open /dev/sda for reading, but found that this a bug for that ver BUG id : CSCso92379 - Cannot open /dev/sda for reading" error seen on installing Gen1 GC
So we tried installing the ver 5.3 now also getting the same error, pls let me know is this a hardware issue or a bug

It sounds like there may either be a problem with the RAID controller [configuration] or, though unlikely a hardware failure. You'd need to check the RAID controller BIOS to see if there's a hard disk drive problem or RAID configuration problem. Also check RAID controller is damaged as disks are not recognized at all.
Rebuild the Raid and reimage the appliances.

Similar Messages

Startx: xf86OpenConsole: Cannot Open /dev/tty0 (Permission Denied)

running startx as normal user gives me the following error:
xf86OpenConsole: Cannot Open /dev/tty0 (Permission Denied)
it seems to run ok as root... but I obviously don't want to be doing that all the time. I guess that means its a permission issue, but what, where, when and how?
I searched the forums and found one article from last year with similar errors after an updated Xorg package, apparently that was fixed and it gave me no insight as to how to manually fix this error.
I'm just starting with Arch and its my first 'advanced' distro (been mostly running ubuntu up until now)... hence, I've never had to set up Xorg etc before.

$ groups
users
$ls -l /dev/tty0
lrwxrwxrwx 1 root root 4 2007-10-17 08:54 /dev/tty0 -> vc/0
I've already tried adding the group 'users' to /dev/tty0 but when I restart it just goes back to 'root'
When I do add the group 'users', it seems to get past the problem with /dev/tty0 and it gives me this error:
xf86OpenConsole: Cannot open virtual console 7 (Permission Denied)

Plugin development for premiere, adobe example error LNK1104: cannot open file 'C:\Program Files\Ad

Hello,
I downloaded the Premiere Pro CS 5.5 Win SDK, i open the project SDK_Exporter in Visual Studio 2008, when i hit debug i get the following error
Error
1
fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\ExporterSDK.prm'
How can i resolve ?

RESOLVED LOOKING AT THE PAST
1.Zac Lam,01-dic-2013 10:43   in reply to Alex B MartinReport
Hi Alex, Are you launching Visual Studio with administrative privileges? If not, you won’t be able to generate the .aex in certain protected folders because of a Windows security restriction.
Was this helpful? Yes   No
Reply
|Mark as:
Unmark as Correct
|Translate
7 posts
03-ene-2013
2.Alex B Martin,01-dic-2013 12:34   in reply to Zac Lam
Yes it works, thanks Note: For CS 5.5 Administrative privileges are not need, so thats only with visual studio 2010 and premiere cs6 where i need to run vs2010 as admin.

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

Security & Privacy System Preferences pane cannot open!

my env:
- Max OS X 10.7.3
- 2.2 Ghz Intel Core i7
this month , i can not enter Security & Privacy pane from System Preferences
- when i click
- pop alert windows, tell some error
what can i do now?!

that magic is:
- my MacBookPro set up two user
- in my user, Security & Privacy System Preferences pane cannot open!
- but switch another user ,
open Security & Privacy System Preferences pane is OK?!
What make this happened?!

System Preferences Error. Cannot open iCloud or others

I am on 10.7.5 on my older iMac.
I just had a new hard drive installed my a Mac Service center.
I am in the System Preferences and when i click on iCloud, it says it has to close system preferences and reopen. I click ok and it reopens SPreferences.
When I click on iCloud a window pops up and says "Preferences Error. Could not load iCloud preference pane". Same thing with Mail/Contacts/Calendars.
Funny thing is, when I click on iCloud or Mail tab in System Prefs, it tells me that SP needs to quit and reopen, it will do so, then the top of the Prefs window then reads "System Preferences (32-bit)".
I tried repairing permissions and restarting, no luck.
Anyone know what the heck is going on?

that magic is:
- my MacBookPro set up two user
- in my user, Security & Privacy System Preferences pane cannot open!
- but switch another user ,
open Security & Privacy System Preferences pane is OK?!
What make this happened?!

I bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

i bought an eBook from iTunes. I can view/read it perfectly on my iPhone but when I try to open the eBook file on my iPad, I get the error message, "Cannot open book. This book is protected by an incompatible technology." Any ideas for me? thx

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

2010 Review Approval Workflow Error - Outlook cannot open a new form

Hi,
I set up an Approval - SharePoint workflow on a document library list in a webpart. When the approver got the email and tried to approve from outlook, she received the following error. She has approved documets in the past for the same page.
Can anyome please help me troubleshoot this? So much appreciated!
Word Error:
Could not open. http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 2010/Review Approval_Task_1033.xsn
Outlook Error:
Outlook cannot open a new form. To open the file, access to the folliwng form template is required
http://<site ulr> _layouts/formsResource.aspx?templateFile=http://<site url_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn

can she open the approval form in web browser instead of Outlook?
According to the error message, it seems that the user does not have permission for the file http://<site url/_catalogs/wfpub/Approval - SharePoint 201o/Review Approval_Task_1033.xsn.
can she open see this file in SharePoint designer 2010? that is, open the site with SharePoint designer and navigate to All Files->_catalogs->wfpub->Approval - SharePoint 201o. If she can not see the file there, ask the workflow creator to publish
the workflow again. I had experienced strange issue in SharePoint designer 2007 and solved by check out all the workflow files and check in again
http://social.msdn.microsoft.com/Forums/en-US/sharepointworkflow/thread/b533cfa5-e858-4ff9-bd0d-96d19946b789.

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file

I am running the TemperatureSensor project from lesson 2
I can detect the BMP180
pi@raspberrypi ~/javame81ea/bin $ sudo i2cdetect -y 1
     0 1 2 3 4 5 6 7 8 9 a b c d e f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
I can retrieve the I2CDeviceConfig info
Controller Name:   null
Controller Number: 1
Address:           0x77
Address Size:      7
Clock Frequency:   3400000
My API permissions are
jdk.dio.DeviceMgmtPermission "*:*" "open"
jdk.dio.i2cbus.I2CPermission "*:*"
But when I attempt
myDevice = DeviceManager.open(config);
I get
[ERROR] [DAAPI] iso=-1:[I2C] cannot open /dev/i2c-1 bus file
Any suggestions?

Hi Tom,
I stepped back and removed the BMP180 entirely. The UU remained.
Googling "raspberry pi UU" yielded
https://github.com/raspberrypi/linux/issues/581
which referenced
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=31420&p=612513#p612513
which referenced
https://www.hifiberry.com/forums/topic/i2cdetect/
which reccomended blacklisting snd_soc_wm8804
Googling "what is snd_soc_wm8804" yielded
http://www.raspberrypi.org/forums/viewtopic.php?f=44&t=81750
which explained the whole matter
Anyhow the UU is gone. Only 77 is detected now. The mystery continues which I accept as an interesting challenge.
Victor

Crystal 8.5 Error #599 Cannot open SQL Server

I have a user who is viewing Crystal reports (8.5 i think) from a window inside GoldMine CRM software.
they are getting an error saying Error #599: Cannot open SQL server.
Any ideas?

We don't support third party applications. Post your question to GoldMine Support

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

Error LNK1104: cannot open file 'MSCOREE.lib'_In visual studio 2013

Hi,
I have upgrade the window application from vs 2008 to vs 2013 after upgradation, when i m trying to build madelineDll I am getting this error LNK1104: cannot open file 'MSCOREE.lib'
MadelineDLL
Can someone help me to resolve this ASAp.
Thanks in advance
Archana K.

Hello archana,
From your description, this exception seems to be related with the C++, if so, i suggest you could post this issue to the C++ forum and i notice that this issue is caused by the upgradation of Visual Studio, you could aslo ask it on the Visual
Studio forum to confirm if the VS2013 has some changes compared with VS2008. I move it to the where the forum for, there are forum experts would help redirect it to a proper forum.
The current forum you posted to is for .NET class libraries.
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory

Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !

This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb"

Cisco Security MARS 110 error - sfdisk:Cannot open /dev/sda for reading

Similar Messages

Maybe you are looking for