Cisco Security Policy Builder, does it still exist?

I'm going through the Cisco CCNA Security Lab manual and in Chapter 9 I need to use the security policy builder. The link has since been deprecated (www.ciscowebtools.com/spb). Does anyone know where I can still find this tool or if maybe it has been updated and named something else?
Thanks for the help!
-Mark

Hi Mark,
Did you find it or any other tool similar to it ? It seems to be a very nice tool to start a Security Policy for a company.
If any one know anything about it let us know.
Thanks,
Paulo

Similar Messages

Does pagemaker still exist and is it free

does pagemaker still exist and is it free

If you are planning to buy it is well to note that it will not run properly or at all on any current Mac or Windows system. It is an antique and you need an old computer and system to run it. If you have old PageMaker files to open, versions of InDesign up to CS6 will have a go, but you've left it a bit late.

HT1338 does iweb still exist? if so, where do i get the app?

does iweb still exist, if so where do i get the app?

Yes, still compatible.
Treat reviews with caution - you can never be quite sure who writes them!

Does iWeb still exist and what does it run through?

Does iWeb still exist and what does it run through? Is it still part of iLife?

Apple has discontinued iWeb and iDVD and no longer sells the last version of iLife ('11).
You may still be able to find a copy of iLife '11 at other resellers. It, and iLife '09, still have iWeb and iDVD.

There once was a link to the updates made in a given release. I can no longer find it. Does this still exist?

When I try to find some list of changes made in 6.0, I can no longer find that link in Firefox online support. Does such a URL still exist?
Regards,
Gordon Gross
CompTIA A+, Network+, Security+
[email protected]
http://www.facebook.com/MrTechnoWiz
http://www.yelp.com/biz/mr-techno-wiz-berkeley
http://www.linkedin.com/in/gordongross
Phone: (510) 747-8250

See:
*http://www.mozilla.com/en-US/firefox/6.0/releasenotes/

Apple security question Provider does no longer exist

I am in a bit of pinch here. I forgot my Apple-ID Security Questions and the email-address in which to reset or get the answers from does no longer exist. therefore I want to know:
1. Can I with my Apple rights change the "Back-Up" e-mail address somehow?
2. Do I have to call the support to solve that problem?
3. If I dig out my Computer on which I created the ID, do you think it would solve anything?
thanks in advance
olfaspur
I am terribly sorry if i did a repost

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

How do I show the bookmarks toolbar while in fullscreen on Firefox 20? In older versions you could edit the userChrome.css file. Does that still exist?

After searching for this option, it appears it was very easy to do in older versions of firefox on windows 7. Many posts say you can edit the userChrome.css file to add:
#PersonalToolbar[moz-collapsed="true"] {
visibility: visible !important;
However, on 2 machines with firefox 20, I've searched for that file and cannot find it. Does it even exist any more? if not, how can I set firefox to go to fullscreen mode and continue to show the bookmarks toolbar? Unchecking hide toolbars does not work for the bookmarks toolbar.

userChrome.css does not exist by default. You can create it; it's an ordinary text file. Note that you do need a namespace at the beginning of the file.
You could try this:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#PersonalToolbar[moz-collapsed="true"]{
visibility: visible !important;
#navigator-toolbox[inFullscreen="true"]{
margin-top:-62px !important;
I added the second rule to prevents the toolbar area from rolling all the way up. The specific value may need to be adjusted by a few pixels depending on your toolbar heights.

Publishing photo's to iweb - without mobileme can it still be done? Does iweb still exist? Help

I have bought the latest version of iPhoto but still can't seem to publish my photo page. I'm sure this is an old question that's been answered time and time again but I can't seem to find anything on this that gives a clear answer.
Thanks

iWeb exists but is not suported or developed anymore.
You can still build a Photos or Albums page in iWeb and publish it...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
You would need to sign up for hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you don't have a domain name, most hosting services will provide one free.

Security policy from old GPO still applying after removal

We have a Server 2k3 domain with a mix of 2k8R2 (PDC) and 2k3 DCs. We are currently in the process of
replacing older 2k3 DC policies with newer policies. Policy A (AKA "Old policy") has always been a problem as it contains settings which cause errors in the event logs of the DCs it is applied to (ID 1020 "Windows cannot create
registry key CurrentControlSet\Control\Session Manager. (The parameter is incorrect)" and 1096 "Windows cannot access the registry policy file, \\domain.com\sysvol\domain.com\Policies\{GUID}\Machine\registry.pol. (The parameter is incorrect)").
Policy B (AKA "New policy") has been wonderful in a completely different AD Forest/Domain that we created it in but is not happy after we copied it to this Domain.
The new policy was exported as a Backup and imported by creating a new GPO on this domain and choosing "Import settings". We've previously encountered both the "hidden file" and "read only" issues with copying GPOs so we avoided
those by ensuring hidden files were copied and removing "read only" from the policy folder. The new policy was then applied to the Domain Controller OU with a higher precedence than the old policy. Neither policy is set to enforced
and the links for both were enabled, both policies are set with GPO Status "Enabled" so the new policy should have overridden the older policy settings. After several gpupdate /force and reboots, the 2k3
domain controllers are showing in RSOP a Red x on "Computer policy" with "Group policy Infrastructure" as failed with details "Group Policy Infrastructure processed successfully but failed to log resultant set of policy information".
Under general with "Display all GPOs and filtering status" Old policy is lower than new policy.
When drilling down to "User Rights Assignment" you can see that "Old Policy" is still the winning policy for all settings. When under "Administrative Templates" "New policy" is the winning policy there. So it
seems that the new policy is applying for admin template settings but not for security policies.
I then disabled the old policy which reflected under the general tab filtering status "Disabled" but the user rights assignment still showed Old policy as winning. I tried modifying the Old policy and saw that the serial number for the policy updated
in the RSOP general tab. Then I completely removed the link for the policy from the DC OU and the policy disappeared from the general tab but still showed under User Rights Assignment.
I've tried clearing the Cached group policy from the machine with:
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
and deleting [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft] from registry and c:\windows\system32\GroupPolicy from HD.
Usually I'll get an error from RSOP about RSOP already running until I gpupdate /force and then I'm back at square one.
I've confirmed that the issue is not replication, the machine shows no errors in FRS and I've performed non-authoritative SYSVOL restore on this server. repadmin
shows no errors.
I have not yet tried to demote/repromote the server as I'm unconvinced that will have any effect. I've seen this kind of issue on 2k3 servers where even after removing the server from the domain entirely the policies from the domain still remain in effect
to where you cannot even modify a setting from local gpedit.msc.
It seems that something is causing security policies to stick from the old policy but is allowing admin template policies to apply from the new policy. Where would these old settings be cached from, and how can I get them to go away?

I've now also tried putting the machine in an OU with inheritance blocking an no policies applied.
I've tried deleting [HKLM\Software\Microsoft\Windows\CurrentVersion\GroupPolicy\History] and reboot.
I've turned on all the logging (http://technet.microsoft.com/en-us/library/cc775423%28v=ws.10%29.aspx) and I can even see the .inf files created in c:\windows\security\templates\policy
for each GPO and the policy shows the correct settings.
NTRights (http://ss64.com/nt/ntrights.html,
http://support.microsoft.com/kb/315276) allows me to set the setting manually and AccessChk shows me the current settings
http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx but I still cannot get RSOP to come back clean. I can also see in c:\windows\security\logs that some of the security settings
I'm working show up; "remove SeDebugPrivilege." for example shows up as having been removed from the local administrator which was one of the changes I made.
I've opened up a ticket with Microsoft Support but they haven't had any fresh ideas either. My best guess at this point is that policy is actually applying but RSOP is busted. I have no idea how to reset the RSOP data however.
At this point I'm trying to run WMIDiag to see if there's an issue with WMI as several of the misc errors in the gpedit.log file come up with WMI related issues in google ("InitializeRSOP failed with 0x80070102", "GetObject for event source
of RSOP_ExtensionEventSource.id="{GUID}" failed with 0x80041002").
I should clarify that AccessChk seems to indicate that the User Rights Assignment settings ARE applying but are not showing correctly in RSOP.

There is/was a utility in VCP to convert a standard organization to a supplier organization. Does this still exist? If so what is the name of the utility?

Trying to create a supplier organization only in VCP, as the source is JDE (JD Edwards).

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See http://kb.mozillazine.org/Zoom_text_of_web_pages
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r45
* Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I work at a publication that referred readers to the Dispute Finder plug-in, but I can find no way to access/download the plug-in. Does it still exist?

If it no longer exists, when did it disappear?

Looks like that Firefox extension was pulled from AMO. <br />
https://addons.mozilla.org/en-US/firefox/addon/11712/
Mozilla sent email to all Add-on developers around the first of the year, as the first step in a cleanup process for the Addons website. Addons created by Developers who didn't respond to multiple emails were deleted from AMO just prior to the Firefox 4.0 release.
I also found a link to that Add-on here ''(where it was created)'' - http://disputefinder.cs.berkeley.edu/ - but it looks like it is gone from that server, too.
http://confront.intel-research.net/Dispute_Finder.html

Now that I have uploaded Firefox 4 I seem to have lost the option to save and quit. Does it still exist and if so, where can I find it?

Well, there's not much more to say really. The main reason I use Firefox is so that I can leave all my tabs open and come back to them next time I log onto the internet and since I upgraded to Firefox 4 I have not been able to do this. When I close down it just asks me if I am sure I want to close all the tabs - this used to happen if I had inadvertently opened Firefox twice but now it happens even when I haven't. If there isn't a solution I will just go back to using the previous Firefox programme.

Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Sorry I can not find Exchange 2010 forum does it still exist? How do you stop mails automaticaly being received by outlook on the exchange server

Hi
is it possible to stop the exchange server 2010 from automatically populating the outlook clients inbox with new emails forcing the users to press send and receive every time they want to collect emails?
I thought it was but I can no longer find any information on this.
kind regards
Paul
paul waterhouse

Hello，
Based on my known, I'm afraid that there is no way to realize it on exchange server.
Could you tell me why you do this?
If you want to control the size of mailboxes, you can configure mailbox storage quotas for a mailbox.
If you want to delete specific message or messages from the specific sender or domain, you can create transport rule to do it. Or you can set outlook rule to do it.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

3.25 GB Ram Limit: Does it still exist?

Hello,
I know my 32-bit Vista Ultimate system allows using only about 3.25 GB of the 4GB Ram that is installed. This is a known issue.
However, I had sworn recently my system showed the full 4GB was being used, but after a recent OS reinstall, it lists only the 3.25GB Ram. Is this correct? Or in my previous case, had a driver update or OS patch been installed that I am now missing? Obviously I should've paid more attention.
Thanks!
Scott

Quote from: Svet on 09-June-09, 10:16:33
Sure that can't be changed. But silly Vista {since SP1} is trying to tricky you:
Windows Vista SP1 includes reporting of Installed System Memory (RAM)
==> http://support.microsoft.com/kb/946003/
Funny...you are exactly right..I just upgraded to SP1 and 4.00 GB is there....thx for the explanation!

In lion does airport still exist or only wi-fi

I upgraded to Lion and now I'm connected to wi-fi, where is airport connection?

Sweet Ds,
If you have a wifi enabled MBP - and most do - the wifi "connection" is in the computer itself. Once it connects to the wifi network, it will automatically work.
If you require a larger network, like for several rooms or an entire house or larger, you would need to purchase an Airport transmitter. Then, the connection is managed wirelessly, but generated after linking to a USB connection.
The info is entirely free - but I'd be obliged if you could post your questions/remark in this post!

Cisco Security Policy Builder, does it still exist?

Similar Messages

Maybe you are looking for