Cisco SG300-10 spf module not recognized

Hi all, I have 2 Cisco SG300-10 switches with MFEFX1 spf modules. Although these modules should be supported, it seems they are not working properly.
If I execute SH fiber-ports optical-transceiver I get
SwInter1#show fiber-ports optical-transceiver interface gi10
   Port      Temp Voltage Current Output Input LOS
                                   Power Power
   gi10      N/S     N/S     N/S    N/S    N/S N/S
Temp         - Internally measured transceiver temperature
Voltage      - Internally measured supply voltage
Current      - Measured TX bias current
Output Power - Measured TX output power in milliWatts
Input Power - Measured RX received power in milliWatts
LOS          - Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Could you help me with this?
Thanks in advance

Hi Mark,
The led is green, also the status is connected
SwInter1#sh interface status
                                                                    Flow Link          Back    Mdix
Port     Type         Duplex Speed Neg      ctrl State       Pressure Mode
gi1      1G-Copper      --      --     --     -- Down           --     --
gi2      1G-Copper      --      --     --     -- Down           --     --
gi3      1G-Copper      --      --     --     -- Down           --     --
gi4      1G-Copper      --      --     --     -- Down           --     --
gi5      1G-Copper      --      --     --     -- Down           --     --
gi6      1G-Copper      --      --     --     -- Down           --     --
gi7      1G-Copper      --      --     --     -- Down           --     --
gi8      1G-Copper      --      --     --     -- Down           --     --
gi9      1G-Combo-C     --      --     --     -- Down           --     --
gi10     1G-Combo-F   Full    100   Disabled Off Up          Disabled Off
When I insert the spf module, this appears in the log
6-Mar-2014 19:04:22 %Fiber-I-SFP-PRESENT-CHNG: gi10 SFP status is present.
06-Mar-2014 19:04:23 %HAL_config_phy-I-CHNGCOMBOMEDIA: Media changed from copper
media to fiber media (Unknown) on port gi10.
06-Mar-2014 19:04:24 %LINK-I-Up: gi10
06-Mar-2014 19:04:24 %LINK-I-Up: Vlan 1
06-Mar-2014 19:04:29 %STP-W-PORTSTATUS: gi10: STP status Forwarding
The ports are simply configured with speed 100. It's being used only vlan 1.
Thanks

Similar Messages

Memory module not recognized on K7T266 Pro2

Hello.
I have a computer with only 256 Mb of RAM and I wanted to add 256 Mb but my second memory module of 256 Mo is not recognized whereas it functions very wel.
Here are details :
- Mother board : MSI K7T266 Pro2 (ms-6380 v2.0) with 3 memory slots
- BIOS : Award Modular W6380F1 V3.0 071902
- Memory module of origin : Samsung 256 Mo PC2100 (2 Sides)
- New memory module : Corsair Value 256 Mo PC3200 (1 Side)
Configs Tested :
- Samsung only : OK
- Corsair only : OK
- Samsung in Slot 1 and Corsair in Slot 2 or 3 : the computer starts but with only 256 Mb of RAM (in this config, Everest Ultimate Edition finds both memory modules but also only 256 Mb of RAM)
- Corsair in Slot 1 and Samsung in Slot 2 or 3 : the computer starts with a blank screen and several beeps.
Can somebody help me so that my second memory module is recognized correctly ? I specify that I did not modify the BIOS.
I thank you by advance.

I'm no memory expert, but from being around here I've learned that there is more to a stick of RAM than the MHz speed. If timings etc were perfectly the same for the 3200 and the 2100, the system (the Northbridge) could simply set down memory speed to the slowest of the sticks.
However, I also know that many have been helped by entering BIOS, Advanced Chipset..., and go to the subtitle Memory timings controlled by..., and change from By SPD to By User. Then manually set down to 133 (266 effectively). This is if you absolutely want these two sticks.

Cisco Linksys RE1000 extender is not recognized

My Actiontec Model GT784WNV (from Verizon) does not recognize the Linksys RE1000 range extender - any ideas?

Most Linksys products have the recessed reset button to reset devices to factory defaults.
Set the extenders Static IP information first before completing the wireless configuration. That way you can login on the extend using that IP after it's initial configuration.
Make sure the router sees the extender at about 70% signal strength. You don't want the extender to have too weak or strong a signal.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

After upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T to the latest release the ASA-SM module is not recognized

after upgrading ios Cisco Catalyst 6500 Series Supervisor Engine 2T to the latest release the ASA-SM module is not recognized it is disabled. the FPD
is not recognized any more. reverted back to previous ios with no luck

Duplicate post.
Being discussed actively in this thread.

Memory modules and hard drive not recognized

I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
Solved!
Go to Solution.

When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

10.4.2 not recognizing extra memory module

I upgraded recently to 10.4.2, and now one of my memory modules is not recognized. the machine has the original 512M chip in the upper slot, but the 512M chip in the lower slot is not recognized. in the system profiler under hardware/diagnostics, i get:
Power On Self-Test:
Last Run:     7/15/05 7:57 PM
Result:     Failed
Failure type:     Memory
Memory slot:     SODIMM0/J25LOWER
anyone have any idea what's going on??? thx.

"However, I have another problem in that there is no startup chime on my machine, and hasn't been for a while"
Same problem with my PowerBook G4 - 1.5GHz - 512MB, only since the chime problem (not hearing it any more) has the problem with not recognizing the lower memory slot. Not certain if the two problems are related. So it seems from the discussions hear there are two solutions, $600 to repair, or purchase more memory to run in the upper slot. I do have to agree that it would be futile in my opinion to pay for the repair if the same problem emerges again, (as has been reported, at least in the forums,) meaning it could cost $1200 to fix (maybe).
"I think that terming the logic board, "fried" overstates the issue. In fact, the logic board itself is probably in good working order, thus its ability to report on the state of the lower RAM slot. The real issue is the quality of the connection from the lower slot to the logic board--essentially a bad solder. This connection can't be resoldered, so the logic board needs to be replaced."
This statement actually makes more sense then anything I have read so far.

GVRP not working on Cisco SG300-28

I have three Cisco SG300-28 switches. I setup a test lab environment with a core (server) switch in Layer 3 mode and the rest are (clients) in Layer 2 mode. As I understand, these switches doesn't support VTP, only GVRP. And GVRP works the same with VTP. Whenever you create VLANs on the core or main switch, other switches will learn from the core switch and no VLAN creation for the client switches will be made. (Hope I got it right. I guess GVRP is more complicated than VTP).
GOAL: Obviously, I want to use GVRP to create VLANs on the main switch so that I won't be doing it all over on the other switches.
The following is my (so far) configuration through CLI only:
I haven't use the web GUI. My SW version is 1.1.2.0.
1. I already enabled the GVRP globally.
2. I configured GE 12 & GE 24 as TRUNK ports for the core switch that connects both switches, I also configured GE 12 ports for both the client switches. All other ports are in ACCESS mode. (I am connected to GE 2 port)
3. I enabled GVRP on the TRUNK ports only for all switches.
4. I allowed all vlans on the TRUNK ports. (#switchport trunk allowed vlan add all)
5. All TRUNK ports registration mode is NORMAL and dynamic vlan creation is enabled on all trunk and access ports.
6. I created 3 VLANs without configuring its IP Addresses:
     vlan 2 = MGT
     vlan 3 = IT
     vlan 4 = MKTG
I don't know if I missed something on the configuration or the connection. I was expecting the vlans I created will be learned from other switches. Hope somebody can help me out. Thanks a lot.
QUESTIONS:
1. Is it necessary to enable all switches to layer 3 mode? Or depends on the network setup? Does this affect the GVRP?
2. Does switching ports to TRUNK mode means they are already 802.1q ports by default? Because I can't configure TRUNK ports to 802.1q (#switchport encapsulation dot1q) config like other switches.
SAMPLE CONFIGURATION:
*** START CONFIG***
vlan database
vlan 2-4
exit
interface range gi12,gi24
gvrp enable
exit
gvrp enable
interface vlan 1
ip address 172.10.10.10 255.255.255.0
exit
interface vlan 1
no ip address dhcp
exit
no bonjour enable
bonjour interface range vlan 1
hostname SW1
line telnet
exec-timeout 0
exit
line telnet
password 1e3855b6b22c5775cd12207ced02a082b073e4a8 encrypted
exit
line console
password 1e3855b6b22c5775cd12207ced02a082b073e4a8 encrypted
exit
enable password level 15 encrypted 1e3855b6b22c5775cd12207ced02a082b073e4a8
no snmp-server server
clock source sntp
no ip domain lookup
ip telnet server
banner login ^C
SWITCH 1: PLEASE DO NOT LOG IN
^C
interface gigabitethernet1
switchport mode access
exit
interface gigabitethernet2
switchport mode access
exit
interface gigabitethernet11
switchport mode access
exit
interface gigabitethernet12
switchport trunk allowed vlan add 2-4
exit
interface gigabitethernet13
switchport mode access
exit
interface gigabitethernet14
switchport mode access
exit
interface vlan 2
name MGT
exit
interface vlan 3
name IT
exit
interface vlan 4
name MKTG
exit
*** END CONFIG ***

trust me i am also heaving the same issue with my 3 Cisco SF300-24 ports ad i need the same what you was looking forward for...
can you please check my question and comment what i am missing :(
Aside to this i will try creating Vlans on my client switch without assigning the ip address as it's already assign and created on core switch.
Thanks,
Sandy

CISCO 3845 - WIC-1B-S/T NOT RECOGNIZED

Dear Sir,
We have Cisco 3845 Router.I inserted the WIC-1B-S/T - 1 port isdn bri card to the HWIC Slot.but it it not recognized.
Kindly help me to find out the solution.
Thanks in advance.
regards
nagarajan
hyundai motor india

Hello Nagarajan,
looking at the data sheet (see link below) it appears that the WIC-1B-S/T is not supported on the 3845, you need the WIC-1B-S/T-V3, as well as IOS 12.3(11)T...
Cisco 3800 Series Integrated Services Routers
Data Sheet
http://www.cisco.com/en/US/products/ps5855/products_data_sheet09186a0080091b87.html
HTH,
GP

IPhone 6 is not recognized by AT&T Microcell (older Cisco version)

I just discovered my new iPhone 6 is not connecting to my existing home AT&T Microcell. This device worked just fine for the last three years with my old iPhones 4 & 5. AT&T tech support had no immediate solution. (The Voice-over-WiFi feature should resolve this issue at some point in the future, however.)

Hello Myschyveus,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone is not being recognized by iPhoto please follow the steps in the article below for your computer.
iOS: Device not recognized in iTunes for OS X
iOS: Device not recognized in iTunes for Windows
Take care,
Alex H.

Java not recognized by Cisco Self-Provisioning Portal on Apple computers

Have a Mac Mini running that had this problem under OSX 10.8 and is persisting in 10.9. When this computers reaches the self-provisioning portal, after clicking submit on the MAC address registration, the following screen displays an erroneous error that Java isn't installed.
Have gone through updating Java from Apple (2013-005) as well as from Oracle/Java (1.7), and applied several variations of uninstalling and reinstalling Java, doesn't seem to make a difference. From the top, the Mac Mini attaches to Wifi and the self-provisioning page appears with an authentication request. User authenticates succesfully. The next page displays the MAC address for the machine and a description field. Upon filling out the description, the page is submitted. The following page tha should complete the provisioning process, rather, displays an error that Java isn't installed and the user should go to java.com to complete the installation. According to the Java.com, Java is installed. According to terminal (by executing the command "java -version"), Java is installed. Running other Java applications, like JDE, run perfectly well. The self-provisioning page seems to be unaware of Java despite everything else. Ideas?

Thanks. No dice. The instructions on that page also appear to be woefully out of date too. In Safari, on the preferences security tab, there is no checkbox for "Enable Java" (I think that is a Safari 6.0.4 thing on OS X 10.8 or thereabouts). In OS X 10.9 there's just the "allow plugins" checkbox and the "manage website settings" button. Assuming this is where it's at now, moving to the Java plugin in the list, they were already "allow". I went a step further and set it for the three websites listed (that include the provisioning portal domain) to "allow always". No luck. Then went to another step further and click "run in unsafe mode" for every item in the Java website list and again it made no difference. The self provisioning portal page still says that Java isn't installed :-(
For Firefox, the instructions on that page are out of date too. Under what I believe are the correct settings, the Java applet plug-in for 7.45 is set to "always activate". I assume this is the same thing as seeing the "disable" button in previous FF versions, indicating that the job applet plug-in is actively running.
The chrome instructions on the page are irrelevant because my OS X and hardware are 64-bit and so is Java but not chrome. Therefore Java doesn't run on chrome on this machine in the first place.
I don't know who's browser the self provisioning portal fires up since it fires up its own window, not a Firefox or Safari specific one. In windows for example the self-provisioning portal fires up a tab in IE. That actually makes it simpler to debug IMO.
Any more advice? Java seems to be running just fine for every thing else. What am I missing?
UPDATE (Just another thought)
Alternatively, could it be a the with WebKit? Or Cisco's implementation of WebKit (as far as whether any changes would have been required for OS X 10.9 in the way with kids is instantiated)? If or example the self provisioning portal is opening up its own "browser" by using the Safari webkit function (as opposed to opening a tab directly in Safari itself) could this be a bug in Safari itself, or a changed API that Cisco has failed to implement (considering the other incompatibilities various Cisco products have with OS X 10.9)? I just hope that the problem is something that I can fix with a workaround rather than waiting for a patch from either Apple or Cisco that may or may not come anytime soon? :-/

FEX 2232TM not recognized by Nexus 5010P

Hi there,
I don't have any clue what this problem might be so please help.
I have a brandnew FEX 2232TM which is connected to a NEXUS 5010P running the following firmware:
oftware
BIOS:      version 1.5.0
loader:    version N/A
kickstart: version 5.2(1)N1(1)
system:    version 5.2(1)N1(1)
power-seq: Module 1: version v1.2
BIOS compile time:       11/30/10
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.2.1.N1.1.bin
kickstart compile time: 7/12/2012 19:00:00 [07/13/2012 02:08:13]
system image file is:    bootflash:///n5000-uk9.5.2.1.N1.1.bin
system compile time:     7/12/2012 19:00:00 [07/13/2012 03:23:16]
According to the Cisco download page it is the latest version and should definitely support the 2232TM.
The problem is that the FEX is completely not recognized by the parent Nexus.
It is connected via 8 FET modules. But when ich check the light on both sides I only have light on the NEXUS side never on the FEX side on all modules.
From my understanding this should be the root cause of the issue because no light = no link.
I tried standard 10GBase-SR and Twinax cables as well. Same behavior - the FEX is not recognized.
The status LED if of course orange on the FEX.
This is the FEX related config ont he NEXUS:
feature fex
fex 101
pinning max-links 8
description "FEX0101"
interface Ethernet1/1
switchport mode fex-fabric
fex associate 101
interface Ethernet1/2
switchport mode fex-fabric
fex associate 101
interface Ethernet1/3
switchport mode fex-fabric
fex associate 101
interface Ethernet1/4
switchport mode fex-fabric
fex associate 101
interface Ethernet1/5
switchport mode fex-fabric
fex associate 101
interface Ethernet1/6
switchport mode fex-fabric
fex associate 101
interface Ethernet1/7
switchport mode fex-fabric
fex associate 101
interface Ethernet1/8
switchport mode fex-fabric
fex associate 101
Can anyone give me a hint what I am missing here??
Any help is really appreciated.
Thanks a lot!

I have a two lab switches running 5.2.1.N1.1 and connected in vpc with 2232TM and I am able to see the fex online without any problems. One side I have SFP-10G-SR and other side I have 3M Cisco Twinax cable.
here is the output from my lab,
5010-1# show fex
FEX         FEX           FEX                       FEX
Number    Description      State            Model            Serial
100        FEX0100                Online    N2K-C2232TM-10GE   SSI15380CPM
5010-1# show fex 100 detail
FEX: 100 Description: FEX0100   state: Online
FEX version: 5.2(1)N1(1) [Switch version: 5.2(1)N1(1)]
FEX Interim version: 5.2(1)N1(1)
Switch Interim version: 5.2(1)N1(1)
Extender Serial: SSI15380CPM
Extender Model: N2K-C2232TM-10GE, Part No: 73-13626-03
Card Id: 164, Mac Addr: 28:94:0f:2e:12:82, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
Pinning-mode: static    Max-links: 1
Fabric port for control traffic: Eth1/1
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
    Po100 - Interface Up. State: Active
    Eth1/1 - Interface Up. State: Active
Fex Port        State Fabric Port
5010-1# show interface e1/1 transceiver details
Ethernet1/1
    transceiver is present
    type is SFP-H10GB-CU3M rev A
    name is CISCO-MOLEX INC
    part number is 74752-9026
    revision is A
    serial number is MOL12240343
    nominal bitrate is 12000 MBit/sec
    Link length supported for copper is 3 m
    cisco id is --
     cisco extended id number is 4
DOM is not supported
5010-2# show fex
FEX         FEX           FEX                       FEX
Number    Description      State            Model            Serial
100        FEX0100                Online    N2K-C2232TM-10GE   SSI15380CPM
5010-2# show fex 100 detail
FEX: 100 Description: FEX0100   state: Online
FEX version: 5.2(1)N1(1) [Switch version: 5.2(1)N1(1)]
FEX Interim version: 5.2(1)N1(1)
Switch Interim version: 5.2(1)N1(1)
Extender Serial: SSI15380CPM
Extender Model: N2K-C2232TM-10GE, Part No: 73-13626-03
Card Id: 164, Mac Addr: 28:94:0f:2e:12:82, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
Pinning-mode: static    Max-links: 1
Fabric port for control traffic: Eth1/1
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
    Po100 - Interface Up. State: Active
    Eth1/1 - Interface Up. State: Active
Fex Port        State Fabric Port
5010-2# show interface e1/1 transceiver details
Ethernet1/1
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-AVAGO
    part number is SFBR-7700SDZ-CS2
    revision is B5
    serial number is AGD133133S4
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                Current              Alarms                  Warnings
                Measurement     High        Low         High          Low
Temperature   44.18 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.26 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        6.48 mA       10.50 mA     2.50 mA    10.50 mA       2.50 mA
Tx Power       -2.62 dBm       1.69 dBm -11.30 dBm   -1.30 dBm     -7.30 dBm
Rx Power       -2.80 dBm --    1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
So dont believe we have any interoperability issue with 5010 and 2232TM here. Before we swap out this fex, can you please open a case with Cisco support or let me know when you are available and I can do a webex to look at this switch to see if there is something more to this problem than what we already know ?
Thanks,
Vinayak

MGBLX1 & Cisco SG300-28

I am trying to connect the 2 Cisco SG300-28 switch using the MGBLX1 module with a single mode fiber cable. When I inserted & removed the module it detected (see attached screenshot) but when I see the optical module it is not detected (see attached screenshot), the shared port of mini-gbic is not blinking. Is there are any compatibility issues with switch, module or single mode fiber? What is the minimum distance of single mode fiber optic cable? Do I need to configure the switch to enable the mini-gbic?

I tried your suggestion but there is no light in the shared port. I will try a patch cable to test the module. How do I know if the module is defective?
Below are the logs.
Optical Module Status Table
Port
Temperature
Voltage
Current
Output Power
Input Power
Transmitter Fault
Loss of Signal
Data Ready
GE27
N/A
N/A
N/A
N/A
N/A
N/A
N/A
GE28
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2147483606
2013-May-02 22:58:48
Informational
%Fiber-I-SFP-PRESENT-CHNG: gi27 SFP status is present.
2147483607
2013-May-02 22:58:43
Informational
%Fiber-I-SFP-PRESENT-CHNG: gi28 SFP status is not present.

Cisco sg300

Добрый день, подключаю трансивер mgbbx1 на одном волокне к Cisco sg300-20. Циска видит его определяет модель, но при подключении оптического волокна сигнал не передается, расстояние подключения 200м и 3 км. Подскажите пожалуйста подключить два оборудования через транс веры. Пожалуйста срочно нужно.

Hi Mark,
The led is green, also the status is connected
SwInter1#sh interface status
                                                                    Flow Link          Back    Mdix
Port     Type         Duplex Speed Neg      ctrl State       Pressure Mode
gi1      1G-Copper      --      --     --     -- Down           --     --
gi2      1G-Copper      --      --     --     -- Down           --     --
gi3      1G-Copper      --      --     --     -- Down           --     --
gi4      1G-Copper      --      --     --     -- Down           --     --
gi5      1G-Copper      --      --     --     -- Down           --     --
gi6      1G-Copper      --      --     --     -- Down           --     --
gi7      1G-Copper      --      --     --     -- Down           --     --
gi8      1G-Copper      --      --     --     -- Down           --     --
gi9      1G-Combo-C     --      --     --     -- Down           --     --
gi10     1G-Combo-F   Full    100   Disabled Off Up          Disabled Off
When I insert the spf module, this appears in the log
6-Mar-2014 19:04:22 %Fiber-I-SFP-PRESENT-CHNG: gi10 SFP status is present.
06-Mar-2014 19:04:23 %HAL_config_phy-I-CHNGCOMBOMEDIA: Media changed from copper
media to fiber media (Unknown) on port gi10.
06-Mar-2014 19:04:24 %LINK-I-Up: gi10
06-Mar-2014 19:04:24 %LINK-I-Up: Vlan 1
06-Mar-2014 19:04:29 %STP-W-PORTSTATUS: gi10: STP status Forwarding
The ports are simply configured with speed 100. It's being used only vlan 1.
Thanks

Isight not recognized by Skype, Google Video Chat, Logitech VID and ichat.

MacBook4,1 Firewire
Leopard 10.5.8
Skype 2.8.0.866
Quicktime Plug in 7.6.9
QUictime player MIA
Here is my story. I will try and make it as brief as possible.
The other day, I put a rented DVD into my dvd drive, and it didn't load. I checked for updates for Mac or quicktime. Nothing available. I did some googlin, and someone suggested I zap pram, repair permissions. I blindly obeyed. That didn't help. Then I messed around with quicktime. Not sure what I did. Finally, I had to download the latest version of VLC to watch my movie. I have no idea of my problems with QT have anything to do with my isight issues with Skype and the like, but I mentioned it just in case.
The next morning, when I went to skype, my video wasn't sending. I'm not sure if my chat partners video was working, we usually only do it one way. Me sending.
I checked to see if my video was working in photobooth. Indeed it was (and still does).
I have to date:
Downloaded the latest version of QT (7.6.9 for Leopard)- the web plug-in for watching QT online is installed and running properly.
After install, the QT player does not show up in applications, or anywhere else on the hard drive.
I Messed around with QT in ways I can't describe. Trying to install older versions, removing who knows what files. Installing again.
zapped PRAM
Cleared preferences for Skype by removing skype plist
download latest version skype
deleted all skype files I could find
reinstall Skype
repaired permissions (FIRST THING I DID)
Put your Mac to sleep
Wake the computer after it has gone to sleep.
Restart your Mac by by choosing the Apple
Shut down your Mac
Start up mac
Shutting down, disconnecting power supply, taking out batter, putting dumte mac together again
changed permissions on skype specifically to make sure all accounts were read/write
tried setting using skype with a new account
tried using skype, google video and logitech using wifi at my work
uninstalled PREY video security app plug in
removed and uninstalled divx
removed and uninstalled perian
Checked Preferences>Video show a black screen that says "No Video Camera Connected" and does not show ANY cameras in the video camera chooser drop down"
NOTE: Google Video Chat does show the isight cam, but a black screen. Logitech just has a black screen and asks "where in the interweb is your cam buddy?
I have searched and failed to find CamCamX5.component
Tested video in Google Chat and Logitech VID chat. built-in isight not recognized
Tested video in iChat - I chat crashed when opening. (i posted the crash report at the end of this post)
I'm sure I'm missing some.......
SOME THINGS I HAVE NOT YET TRIED
ROSETTA - in the Skype info pane, Rosetta is greyed out. I don't know if I have it, don't know where to get it. Don't know if I need.
Installing Skype while playing Stairway to Heaven backwards
Reset SMC or PMU
Done disk repair - I'm not sure how to do that, I used to have a disc for my old mac for that
Deleted iPhotoPhotocast and/or QuartzComposer.
Closing Firefox and starting Skype
install older version of skype
ICHAT CRASH REPORT
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: kHW_IntelGMA965Item, GMA X3100, spdisplays_builtin, 144 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.21)
Bluetooth: Version 2.1.9f10, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, (null) mA
USB Device: Apple Internal Keyboard / Trackpad, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
Process: iChat [191]
Path: /Applications/iChat.app/Contents/MacOS/iChat
Identifier: com.apple.iChat
Version: ??? (???)
Build Info: iChat-6220000~1
Code Type: X86 (Native)
Parent Process: launchd [67]
Interval Since Last Report: 7034092 sec
Crashes Since Last Report: 37
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 2
Date/Time: 2011-01-17 20:32:51.126 -0800
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: A12CF9D7-D5A7-4ED6-8488-B9B5FD597DC4
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Couldn't load DefaultDefaults'
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x9313ae94 __TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION__ + 4
1 libobjc.A.dylib 0x92f2ae3b objcexceptionthrow + 40
2 com.apple.CoreFoundation 0x9313adcb +[NSException raise:format:arguments:] + 155
3 com.apple.Foundation 0x9530ef35 -[NSAssertionHandler handleFailureInFunction:file:lineNumber:description:] + 101
4 iChatCommonGUI 0x009e135d RegisterDefaults + 232
5 com.apple.iChat 0x0013c10c 0x1000 + 1290508
6 com.apple.iChat 0x0000341e 0x1000 + 9246
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xa03560f0 ebx: 0x92f2ae1c ecx: 0xa03551a0 edx: 0x00a2a000
edi: 0x00000000 esi: 0x009f71b0 ebp: 0xbffffa38 esp: 0xbffffa38
ss: 0x0000001f efl: 0x00000282 eip: 0x9313ae94 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x0231e000
Binary Images:
0x1000 - 0x23cfef com.apple.iChat 4.0.9 (622) <deb92a6fd826a5eb82f1d8991748ef59> /Applications/iChat.app/Contents/MacOS/iChat
0x2b1000 - 0x326ff7 com.apple.Bluetooth 2.1.9 (2.1.9f10) <d70a88066ebf7eb8071781f686caced3> /System/Library/Frameworks/IOBluetooth.framework/Versions/A/IOBluetooth
0x375000 - 0x391fff com.apple.IMFramework 4.0.8 (584) <49551f914cd1c3ba154f15f3765803a9> /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
0x3aa000 - 0x4ddff6 com.apple.viceroy.framework 363.57 (363.59) <3de89d35cae265ca45b876897be26679> /System/Library/PrivateFrameworks/VideoConference.framework/Versions/A/VideoCon ference
0x54e000 - 0x58dfff com.apple.vmutils 4.1 (104) <9009c24d9279b0794970d8eea4134201> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x5af000 - 0x6b6ff7 com.apple.WebKit 5533.19 (5533.19.4) <9299024ba5d2d796781e6d7312fae16a> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x76a000 - 0x783fff com.apple.frameworks.preferencepanes 12.2 (12.2) <090decd2f1c3f48031e43fdf2171469f> /System/Library/Frameworks/PreferencePanes.framework/Versions/A/PreferencePanes
0x79d000 - 0x79fffd com.apple.CrashReporterSupport 10.5.7 (161) <ccdc3f2000afa5fcbb8537845f36dc01> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x7a6000 - 0x7d8fff com.apple.remotedesktop.screensharing 1.0.3 (1.0.3) <a6a5cd9d317cc6606b6b02c96df076fb> /System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/ScreenShar ing
0x7eb000 - 0x7ffff7 com.apple.ScreenSaver 2.2 (2.2) <e8b7c717976f8af3ec1f255c5ad04caf> /System/Library/Frameworks/ScreenSaver.framework/Versions/A/ScreenSaver
0x810000 - 0x823fff com.apple.IMUtils 4.0.8 (584) <2105663d09d2bee0d8742159d0581a3e> /System/Library/Frameworks/InstantMessage.framework/Frameworks/IMUtils.framewor k/Versions/A/IMUtils
0x832000 - 0x850fe3 libexpat.1.dylib ??? (???) <eff8a63a23a7d07af62b36fdb329e393> /usr/lib/libexpat.1.dylib
0x858000 - 0x86ffff com.apple.datadetectors 1.0.1 (66.2) <b4676446cca8a1e4c28ca911026b7ceb> /System/Library/PrivateFrameworks/DataDetectors.framework/Versions/A/DataDetect ors
0x883000 - 0x8d1ff3 com.apple.datadetectorscore 1.0.2 (52.14) <bd3bfe061091be75ce6a27172b988702> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x902000 - 0x975fff com.apple.iLifeMediaBrowser 2.1.5 (368) <3026150475335424dd1532739ded6fb0> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x9c3000 - 0x9f5ff7 iChatCommonGUI ??? (???) <eaba5e1e294f518db1b573b7fee6ff87> /System/Library/PrivateFrameworks/iChatCommonGUI.framework/iChatCommonGUI
0xa20000 - 0xa22fff com.apple.BezelServicesFW 1.4.9212 (1.4.9212) /System/Library/PrivateFrameworks/BezelServices.framework/Versions/A/BezelServi ces
0x1110000 - 0x1c0afff com.apple.WebCore 5533.19 (5533.19.4) <9b91bb00c553ec746fdbe51abca306af> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <458eed38a009e5658a79579e7bc26603> /usr/lib/dyld
0x90003000 - 0x90032fe3 com.apple.AE 402.3 (402.3) <b13bfda0ad9314922ee37c0d018d7de9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x90036000 - 0x901b6fff com.apple.AddressBook.framework 4.1.2 (702) <f9360f9926ccd411fdf7550b73034d17> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x901b7000 - 0x901befe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x901bf000 - 0x90218ff7 libGLU.dylib ??? (???) <a3b9be30100a25a6cd3ad109892f52b7> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x90219000 - 0x90253fe7 com.apple.coreui 1.2 (62) /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x90254000 - 0x902a2fe3 com.apple.AppleVAFramework 4.1.17 (4.1.17) /System/Library/PrivateFrameworks/AppleVA.framework/Versions/A/AppleVA
0x902a3000 - 0x90427fef com.apple.MediaToolbox 0.484.2 (484.2) <32bf3254fafd942cf8f2c813960217fd> /System/Library/PrivateFrameworks/MediaToolbox.framework/Versions/A/MediaToolbo x
0x905b8000 - 0x905b8fff com.apple.Carbon 136 (136) <27d42531a2cbeb05a7f4d05a28281bd7> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x905b9000 - 0x90633ff8 com.apple.print.framework.PrintCore 5.5.4 (245.6) <03d0585059c20cb0bde5e000438c49e1> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x90634000 - 0x90673fef libTIFF.dylib ??? (???) <a5991d757f0c17a9bb8b1bcb14ab9ec0> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x90674000 - 0x90724fff edu.mit.Kerberos 6.0.14 (6.0.14) <673f107cdae80c084774a27bc7bc46c1> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x90725000 - 0x90769feb com.apple.DirectoryService.PasswordServerFramework 3.0.4 (3.0.4) <45d0af6eed184b278990175527a0d3fa> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x9076a000 - 0x90779ffe com.apple.DSObjCWrappers.Framework 1.3 (1.3) <09deb9e32d0d09dfb95ae569bdd2b7a4> /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x9077a000 - 0x90804ff7 com.apple.DesktopServices 1.4.9 (1.4.9) <f5e51a76d315798371b3dd35a4d46d6c> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x90805000 - 0x9093dfe7 com.apple.imageKit 1.0.2 (1.0) <00d03cf7f26e1b6023efdc4bd15dd52e> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x9093e000 - 0x90940ff5 libRadiance.dylib ??? (???) <276f13ab6429e05b093a8dda251e3b53> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x90941000 - 0x90c6cff6 com.apple.QuickTime 7.6.9 (1680.9) <024f122335016a54f8e59ddb4c79901d> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x90c6d000 - 0x90e3eff3 com.apple.security 5.0.6 (37592) <0b25e1e4cc34431630f01edb3fdf54d1> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x90e3f000 - 0x90e88fef com.apple.Metadata 10.5.8 (398.26) <e4d268ea45379200f03cdc7c8bedae6f> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x90e89000 - 0x90e89ffc com.apple.audio.units.AudioUnit 1.5 (1.5) /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x90e8a000 - 0x90f1dfff com.apple.ink.framework 101.3 (86) <bf3fa8927b4b8baae92381a976fd2079> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x90f1e000 - 0x915befef com.apple.CoreGraphics 1.409.7 (???) <7b65edcce394f39b6a1954d5e30bc34c> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x915bf000 - 0x91726ff3 libSystem.B.dylib ??? (???) <c8f52e158bf540cc000146ca8a705958> /usr/lib/libSystem.B.dylib
0x91727000 - 0x9172cffc com.apple.KerberosHelper 1.1 (1.0) <c6b942d705fa0460ace11af01f316db1> /System/Library/PrivateFrameworks/KerberosHelper.framework/Versions/A/KerberosH elper
0x9172d000 - 0x917c0ff3 com.apple.ApplicationServices.ATS 3.8 (???) <e61b0945da6ab368348a927f7428ad67> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x917c1000 - 0x917cefe7 com.apple.opengl 1.5.10 (1.5.10) <5a2813f80c9441170cc1ab8a3dac5038> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x917cf000 - 0x917d3fff com.apple.OpenDirectory 10.5 (10.5) <7d9ff71c60ad73f4c82a638abc233bf0> /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/OpenDirect ory
0x917d4000 - 0x91b90ff4 com.apple.VideoToolbox 0.484.2 (484.2) <46c37a5fead4e4f58501f15a641ff476> /System/Library/PrivateFrameworks/VideoToolbox.framework/Versions/A/VideoToolbo x
0x91b91000 - 0x91e6bff3 com.apple.CoreServices.CarbonCore 786.16 (786.16) <60b518e4ad02b91826240199a6311286> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x91e6c000 - 0x91e6cff8 com.apple.ApplicationServices 34 (34) <8f910fa65f01d401ad8d04cc933cf887> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x91e6d000 - 0x91eabfff libGLImage.dylib ??? (???) <a6425aeb77f4da13212ac75df57b056d> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x91eac000 - 0x91f39ff7 com.apple.LaunchServices 292 (292) <a41286c7c1eb20ffd5cc796f791070f0> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x91f3a000 - 0x922d7fef com.apple.QuartzCore 1.5.8 (1.5.8) <a28fa54346a9f9d5b3bef076a1ee0fcf> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x922d8000 - 0x922d8ffd com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x922d9000 - 0x9234bfff com.apple.PDFKit 2.1.2 (2.1.2) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x9234c000 - 0x923feffb libcrypto.0.9.7.dylib ??? (???) <d02f7e5b8a68813bb7a77f5edb34ff9d> /usr/lib/libcrypto.0.9.7.dylib
0x923ff000 - 0x9247cfef libvMisc.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x9247d000 - 0x92487feb com.apple.audio.SoundManager 3.9.2 (3.9.2) <0f2ba6e891d3761212cf5a5e6134d683> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x92488000 - 0x9248cfff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x9248d000 - 0x92c8bfef com.apple.AppKit 6.5.9 (949.54) <4df5d2e2271175452103f789b4f4d8a8> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x92c8c000 - 0x92ca8ff3 com.apple.CoreVideo 1.6.1 (48.6) <186cb311c17ea8714e918273c86d3c13> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x92ca9000 - 0x92cebfef com.apple.NavigationServices 3.5.2 (163) <91844980804067b07a0b6124310d3f31> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x92cec000 - 0x92d93feb com.apple.QD 3.11.57 (???) <35f058678972d42b88ebdf652df79956> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x92d94000 - 0x92db1ff7 com.apple.QuickLookFramework 1.3.1 (170.9) /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x92db2000 - 0x92efaff7 com.apple.ImageIO.framework 2.0.7 (2.0.7) <acf821a3c418fdc86ef02b654366f5f6> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x92efb000 - 0x92efffff libGIF.dylib ??? (???) <36f7b0255a81d97c7b360c3b11b4e462> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x92f00000 - 0x92f16fff com.apple.DictionaryServices 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x92f21000 - 0x93001fff libobjc.A.dylib ??? (???) <7b92613fdf804fd9a0a3733a0674c30b> /usr/lib/libobjc.A.dylib
0x93002000 - 0x9304dfe1 com.apple.securityinterface 3.0.4 (37213) <16de57ab3e3f85f3b753f116e2fa7847> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x9304e000 - 0x93181fe7 com.apple.CoreFoundation 6.5.7 (476.19) <a332c8f45529ee26d2e9c36d0c723bad> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x93182000 - 0x93182ff8 com.apple.Cocoa 6.5 (???) <e064f94d969ce25cb7de3cfb980c3249> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x93183000 - 0x93541fea libLAPACK.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x9356b000 - 0x936a4ff7 libicucore.A.dylib ??? (???) <f2819243b278259b9a622ea111ea5fd6> /usr/lib/libicucore.A.dylib
0x936a5000 - 0x936f0ff7 com.apple.CoreMediaIOServices 130.0 (935) <e7c6d794bbec49f9d1ee8261c3f9ff0e> /System/Library/PrivateFrameworks/CoreMediaIOServices.framework/Versions/A/Core MediaIOServices
0x936f1000 - 0x936f9fff com.apple.DiskArbitration 2.2.1 (2.2.1) <75b0c8d8940a8a27816961dddcac8e0f> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x936fa000 - 0x93756ff7 com.apple.htmlrendering 68 (1.1.3) <fe87a9dede38db00e6c8949942c6bd4f> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x93757000 - 0x93763ffe libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x93764000 - 0x9384cff3 com.apple.CoreData 100.2 (186.2) <44df326fea0236718f5ed64084e82270> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x9384d000 - 0x9385dffc com.apple.LangAnalysis 1.6.5 (1.6.5) <d057feb38163121ffd871c564c692804> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x9385e000 - 0x9385effa com.apple.CoreServices 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x949f9000 - 0x94a09fff com.apple.speech.synthesis.framework 3.7.1 (3.7.1) <06d8fc0307314f8ffc16f206ad3dbf44> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x94a0a000 - 0x94a59fff com.apple.QuickLookUIFramework 1.3.1 (170.9) /System/Library/PrivateFrameworks/QuickLookUI.framework/Versions/A/QuickLookUI
0x94a5a000 - 0x94e6afef libBLAS.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x94e6b000 - 0x94e8affa libJPEG.dylib ??? (???) <d23f3f3b9d168bf32f89449f83fa07f7> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x94e8b000 - 0x94eaffeb libssl.0.9.7.dylib ??? (???) <5b29af782be5894be8b336c9c73c18b6> /usr/lib/libssl.0.9.7.dylib
0x94eb8000 - 0x94ecdffb com.apple.ImageCapture 5.0.2 (5.0.2) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x94ece000 - 0x94ed3fff com.apple.CommonPanels 1.2.4 (85) <ea0665f57cd267609466ed8b2b20e893> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x94ed4000 - 0x94f7bfec com.apple.CFNetwork 438.16 (438.16) <dbf00ca36a09edfae60ec44f9d7a9ef9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x94f7c000 - 0x95003ff7 libsqlite3.0.dylib ??? (???) <3334ea5af7a911637413334154bb4100> /usr/lib/libsqlite3.0.dylib
0x95004000 - 0x95004ffb com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks/InstallServer.framework/Versions/A/InstallSer ver
0x95005000 - 0x9500cffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x9500d000 - 0x95047ffe com.apple.securityfoundation 3.0.2 (36131) <39663c9b6f1a09d0566305d9f87cfc91> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x95048000 - 0x950c7ff5 com.apple.SearchKit 1.2.2 (1.2.2) <3b5f3ab6a363a4d8a2bbbf74213ab0e5> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x950c8000 - 0x950cefff com.apple.print.framework.Print 218.0.3 (220.2) <5b7f4ef7c2df36aff9605377775781e4> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x950cf000 - 0x95106fff com.apple.SystemConfiguration 1.9.2 (1.9.2) <8b26ebf26a009a098484f1ed01ec499c> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x95131000 - 0x95133fff com.apple.securityhi 3.0 (30817) <31baaf7ea27b41480604ffc910fe827f> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x95134000 - 0x951effe3 com.apple.CoreServices.OSServices 228.1 (228.1) <76fdc146b4d9937f9c5cbaa1512e0023> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x951f0000 - 0x951f0ffd com.apple.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x951f1000 - 0x9546dfe7 com.apple.Foundation 6.5.9 (677.26) <c68b3cff7864959becfc7fd1a384f925> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x95480000 - 0x95481ffc libffi.dylib ??? (???) <a3b573eb950ca583290f7b2b4c486d09> /usr/lib/libffi.dylib
0x95482000 - 0x95563ff7 libxml2.2.dylib ??? (???) <b3bc0b280c36aa17ac477b4da56cd038> /usr/lib/libxml2.2.dylib
0x95571000 - 0x95769fff com.apple.JavaScriptCore 5533.19 (5533.19.1) <a099821bc9203b1bba37aee855280e28> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x958a1000 - 0x958aafff com.apple.speech.recognition.framework 3.7.24 (3.7.24) <73cf6b3c5ddf94d7ce9ae2c81c1b558c> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x958ab000 - 0x958fcfeb com.apple.framework.familycontrols 1.0.4 (1.0.4) <e76b4fa1c25673c8e0fb183b6c0e8eaf> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x959c7000 - 0x959d6fff libsasl2.2.dylib ??? (???) <0ae9f3c08d8508d9dba56324c60ceb63> /usr/lib/libsasl2.2.dylib
0x959d7000 - 0x95a00fff libcups.2.dylib ??? (???) <2b0ab6b9fa1957ee940835d0cfd42894> /usr/lib/libcups.2.dylib
0x95a0d000 - 0x95a0dffe com.apple.quartzframework 1.5 (1.5) <4b8f505e32e4f2d67967a276401f9aaf> /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x95a0e000 - 0x95a26fff com.apple.openscripting 1.2.8 (???) <572c7452d7e740e8948a5ad07a99602b> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x95a27000 - 0x95a38ffe com.apple.CFOpenDirectory 10.5 (10.5) <39d48cd00b8f9ca3fcdd251715cc74d5> /System/Library/PrivateFrameworks/OpenDirectory.framework/Versions/A/Frameworks /CFOpenDirectory.framework/Versions/A/CFOpenDirectory
0x95ade000 - 0x95ae3fff com.apple.DisplayServicesFW 2.0.2 (2.0.2) <cb9b98b43ae385a0f374baabe2b71764> /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x95ae4000 - 0x95b24fef com.apple.CoreMedia 0.484.2 (484.2) <81221976abdc19f30723c81c5669bbc9> /System/Library/PrivateFrameworks/CoreMedia.framework/Versions/A/CoreMedia
0x95b25000 - 0x95ce1ff3 com.apple.QuartzComposer 2.1 (106.13) <40f034e8c8fd31c9081f5283dcf22b78> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x95ce2000 - 0x961b3fbe libGLProgrammability.dylib ??? (???) <7f18294a7bd0b6afe4319f29187fc70d> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x961b4000 - 0x96211ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x96212000 - 0x96263ff7 com.apple.HIServices 1.7.1 (???) <ba7fd0ede540a0da08db027f87efbd60> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x96264000 - 0x96267fff com.apple.help 1.1 (36) <b507b08e484cb89033e9cf23062d77de> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x96268000 - 0x96268ffe com.apple.MonitorPanelFramework 1.2.0 (1.2.0) <a2b462be6c51187eddf7d097ef0e0a04> /System/Library/PrivateFrameworks/MonitorPanel.framework/Versions/A/MonitorPane l
0x96269000 - 0x9629bfff com.apple.LDAPFramework 1.4.5 (110) <bb7a3e5d66f00d1d1c8a40569b003ba3> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x9629c000 - 0x963eeff3 com.apple.audio.toolbox.AudioToolbox 1.5.3 (1.5.3) /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x963f7000 - 0x966fffe7 com.apple.HIToolbox 1.5.6 (???) <eece3cb8aa0a4e6843fcc1500aca61c5> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x96700000 - 0x9672bfe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib
0x9672c000 - 0x96876feb com.apple.QTKit 7.6.9 (1680.9) <fe987e6adf235d5754399dcdae6e5a8e> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x96877000 - 0x96895ff3 com.apple.DirectoryService.Framework 3.5.7 (3.5.7) <b4cd561d2481c4162ecf0acdf8cb062c> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x96896000 - 0x9689bfff com.apple.backup.framework 1.0 (1.0) /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x9689c000 - 0x968c0fff libxslt.1.dylib ??? (???) <0a9778d6368ae668826f446878deb99b> /usr/lib/libxslt.1.dylib
0x968c1000 - 0x96988ff2 com.apple.vImage 3.0 (3.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x96989000 - 0x96997ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x96998000 - 0x969c9ffb com.apple.quartzfilters 1.5.0 (1.5.0) <22581f8fe9dd2cb261f97a897407ec3e> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x969ca000 - 0x96a24ff7 com.apple.CoreText 2.0.5 (???) <5483518a613464d043455ac661a9dcbe> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x96a25000 - 0x96a43fff libresolv.9.dylib ??? (???) <a8018c42930596593ddf27f7c20fe7af> /usr/lib/libresolv.9.dylib
0x96a44000 - 0x96a5fff3 libPng.dylib ??? (???) <c0791798fb92acc136c250a373449359> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x96a60000 - 0x96a60ffd com.apple.Accelerate 1.4.2 (Accelerate 1.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x96a61000 - 0x96a8efeb libvDSP.dylib ??? (???) <b232c018ddd040ec4e2c2af632dd497f> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x96a8f000 - 0x96b0cfeb com.apple.audio.CoreAudio 3.1.2 (3.1.2) <782a08c44be4698597f4bbd79cac21c6> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x96b0d000 - 0x96b9aff7 com.apple.framework.IOKit 1.5.2 (???) <7a3cc24f78f93931731203854ae0d891> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x96b9b000 - 0x96c66fef com.apple.ColorSync 4.5.3 (4.5.3) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
I know this is a lot of info. I hope I didn't miss anything. I use skype with three people. Three very important people. Two of which, meh, the video isn't important. ONe where the video option is paramount.
I'm just a little frustrated. Thanks in advance for any help.

Hi,
We will come back to iChat if required.
It does prefer an Screen Name to be added as you go through the Start Up Screens (First Run) but you can click through these and just access the iChat > Preferences > Video Section to view a Preview.
I must admit to not seeing a Crash Log when the known chosen Mic/Audio Input has not been listed.
However if the External Audio was Firewire connected that may explain things.
NOTE:-
mAudio and other Firewire Audio Devices do tend to need the Most up-to-date drivers to work properly.
Sometimes it pays not to do a COMBO or other Software Update until you know the drivers are ready for it.
With any OS update above the 10.x.1 point will also have a COMBO version.
The COMBO then includes all the updated items between the base level OS and the latest Update.
So for 10.6 there is only what is called a Delta for 10.6.1
There is a delta (10.6.1 to 10.6.2 only) and a COMBO (10.6 to 10.6.2) for the next update and this is repeated through 10.6.6
The Deltas only include those things that are Updated on that occasion (As in the 10.6.1 to 10.6.2 example - 10.6.5 to 10.6.6 would not include the stuff in 10.6.4 or earlier)
COMBOs can be installed "Over-the-Top" of what you have already installed.
It is certainly needed when you Re-install something (Apple apps/Files etc) from the Install Disk you have when your OS has been updated beyond that point.
Some apps like iChat Get their Updates in the OS Updates and need to "Match" the progression.
The 10.5.8 COMBO (Your specs say 10.5.8) is Here
For others the 10.6.5 COMBO is here
and 10.6.6 COMBO IS here
<hr>
Quicktime.
The Download and Install should be all the parts of Quicktime.
Internet Plug-ins for Browsers, various System Files to make Quicktime work for other apps, various Components to play various formats and of course the Player itself.
The Player should be in the Applications Folder with this icon:-
The OS 10.6 version (Quicktime X has a big blue X icon)
If you mean it has disappeared from the DOCK you can Drag the Application back to the DOCK to make the icon (and link to app) again (The app stays in the Applications folder the OS just makes an icon and links it for you by doing this)
One of the biggest causes of many apps not working is turning Off/Disabling certain Fonts the apps need.
Follow the Link in this Users Tip by Kurt Lang. Make sure that the Correct System Fonts are ON.
9:53 PM Tuesday; January 25, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Communication problem between Cisco 3560 and Cisco SG300.

Dear Support,
I have a Cisco SG300 and Cisco 3560 switches.
3560 is my Core Switch and SG300 is access switch.
From 3560 VLAN information is not passed to SG300.
3560 Configuration:
interface GigabitEthernet0/23
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,2,10,11
switchport mode trunk
SG300 Configuration:
interface gigabitethernet49
spanning-tree link-type point-to-point
switchport mode general
switchport general allowed vlan add 2,10-11 tagged
macro description switch
Please suggest how this issue is resolve.
Regards,
JItesh Mahajan.

Dear Aleksandra,
Below Configuration is right or wrong for 3560 and SG300.
3560 Configuration:
interface GigabitEthernet0/23
switchport trunk encapsulation dot1q
switchport trunk allowed vlan remove VLAN 1
switchport native vlan 1
switchport trunk allowed vlan 1,2,10,11
switchport mode trunk
SG300 Configuration:
interface gigabitethernet49
spanning-tree link-type point-to-point
switchport mode general
switchport general allowed vlan add 2,10-11 tagged
macro description switch
Regards,
JItesh Mahajan.

Cisco SG300-10 spf module not recognized

Similar Messages

Maybe you are looking for