Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

I have 2 Cisco SG300-52P switches. Earlier this week, one of them started dropping connections and POE was not working on a couple of devices... I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.
I have been waiting for some down time to do a firmware update, so I thought this might straighten things out. I Downloaded the updated bootloader and firmware from Cisco's site. Updating the (non-problem) SG300 went exactly as it should. Upgrading the the bootloader on the problem SG300 went exactly as it should. Started the firmware update on the problem switch ....... and it didn't come back online. The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it. There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input. I power cycled the SG300 and watched the messages go by ... It looked like everything was working. I even got a message that the "Initialization task was completed"..
Then this message "HOSTP_flash_operation: fatal error during read operation!"
We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that.
any suggestions?
putty output file attached

I am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash. It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
HTH

Similar Messages

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Error "logical end of file reached during read operation"

I am trying to burn a dvd of a wedding I did, and this is the error I am getting. After 5 hours of it trying to burn when I click cancel this it says " logical end of file reached during read operation". Does anyone know what this means, and how I can fix it? I am anxious to get this wedding finished and out to the customer. Any help would be greatly appreciated.

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

VS 2015 - Fatal error during installation - Cannot read key

I'm trying to install Visual Studio 2015 Preview from the ISO image. I get this error
Visual Studio Core Features
Fatal error during installation
Here are the relevant parts of the log file
http://privatepaste.com/d2f0080766
Trying to fix the permissions to the mentioned key (which I have done maybe ten times by now) only gives me a new error with a new key. Is there a better solution?
Windows 8.1

I downloaded the
Visual Studio 2015 Preview ISO Image in English onto Windows 7 PC. I didn't have an optical disk large enough to copy it to in order to install VS 2015 preview using ISO from optical disk drive.
So I used 7Zip to extract the files from the ISO into a folder on my desktop and then install it. There was no key needed as this is a preview version. So I was never asked about any key. Although it must've had a key that came with it because
after it installed I went to Help, Register Product and was advised after a bit that it updated with a key I suppose, even though it was already working, and the product was good for so many days.
Microsoft recommends the following for extracting files from an ISO in order to install the software without using an optical disk. I used 7Zip which is not recommended by MS.
The following tools offer .ISO file support:
IsoBuster
CDmage
Daemon Tools
Winrar
Also note: "Visual Studio 2015 Preview cannot be installed on a computer that has a previous version of Visual Studio "14" CTP installed. To install this release version, you must first
uninstall any currently installed CTP."
And I had installed .Net Framework 4.6 preview prior to installing VS 2015 preview.
La vida loca

Visual C++ Fatal error during installation

When I was installing Titanfall on Origin I got a 1603 error. I looked at some forum posts on fixes.
I have uninstalled all of my VC++ from my computer and when i tried to download and install fresh copies every single one results in a fatal error durring installation.
OS Version = 5.1.2600, Platform 2, Service Pack 2
OS Description = WinXP - x64 Professional Service Pack 2
CommandLine = c:\9606a8ce2f11654507209809fa5c4d\Setup.exe
TimeZone = Mountain Standard Time
Initial LCID = 1033
Using Simultaneous Download and Install mechanism
Operation: Installing
Package Name = Microsoft Visual C++ 2010 x64 Redistributable Setup
Package Version = 10.0.30319
User Experience Data Collection Policy: UserControlled
Number of applicable items: 3
Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:00:13).

The error log is incorrect. I am using Windows 7 Pro.
I was able to install MS VC++ 2013 redist.(x64) and VC++ 2005 (x64) just fine but I cannot install 2010.
Eh? Never saw an install log where Win 7 was identified as Win XP x64.
What, exactly, are you trying to install? Are you installing Visual Studio, or C++ redistributables?
Please show the link to what you are trying to install, and provide your install logs as follows:
Please collect your install logs with this:
http://aka.ms/vscollect
After you run Collect.exe, you'll find vslogs.cab in your %temp% directory. Please upload vslogs.cab to a public site, like OneDrive, and post the link here.

Logical end-of-file reached during read operation

Hi,
Something strange happened to my Logic a couple of days ago - all of a sudden. When I start Logic up it gives me the following error message:
*Error reading/writing file “com.apple.logic.pro.cs”: Logical end-of-file reached during read operation.*
I have re-installed Logic, as well as updated it (8.0.2), I have repaired disk permissions in Disk Utility, and it still keeps popping up. I cannot get on with my projects and I have deadlines!
I found an IT support site, according to that I don't have enough space on my HD. However, I do... I'm confused, and desperately need help.
Thank you so much, I'm looking forward to hearing from somebody.
Agnes

I am not opening any files, just launching Logic.
I know. And when you launch Logic, it loads its preferences files - and it seems this is failing - most likely due to file corruption. So delete the file, as I said, and Logic should load fine.

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

EXS 24 Logical end-of-file reached during read operation Result code = -39

EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try and fix I extracted two kits with the same name but oddly they are slightly different sizes and have different creation dates, one 2004 the other 2007 hmmm (one goes in Garage band for remix tools the other gets placed in 02 Electronic Drum kits) from the install disks using Pacifist hoping to replace corrupted files. NG. I also reinstalled all the samples from the LP8 install disk, still NG. Anybody have a solution. THanks.

To further clarify, the samples are all located in the folder Garage band/.../.../.../Sampler Files/Treated Percussion Sets/Perc-DnB+Triphop. They are used in the EXS24 Trip Hop Remix kit.exs. The 3 samples that seem to be causing the error are, YT2BGLRHTX02_3ue.aif, YT2BGLRHTX03_3ue.aif, YT2BGLRHTX04_3ue.aif. The kit is useless and my song is screwed up now that the kit will not load. Any ideas for a fix out there ?

Fatal error during installation - Error 1603 ONLY on XP

My Dears,
while installing any CS3 or CS4 Adobe product for my friend, at ~90% of installation error comes up:
"Adobe Photoshop CS4
Error:
Error 1603. Fatal error during installation."
I am struggling to solve it for 3 days now, and of corse I have seen and tryied all things proposed in posts like this: http://forums.adobe.com/thread/373577 , but still nothing helps me.
Thats list of all things that I have tryied to do:
- CleanUp fix
- Uninstalling all Adobe before fix
- Turning Internet off fix
- Turning anti-vir things off fix
- Registery fix
- Starting from CLEAN new system fix
- Changing language from US to International fix
Still nothing. Probably thats the point of problem:
Current Situation:
Got ACER ASPIRE x3200 desktop width Windows Vista (preinstalled), did clean installation of Windows XP and dumped Vista
There is no official drivers for XP, but got cracked chipset driver and official nVidia 8200 driver for XP from Internet
Got all Service Packs
100% legal
If nothing is working, maybe thats becaouse of my PC?! Installed it on my laptop with Vista 32b - WORKS (it means that installation CD is not corruptet or something). But then I have tryied to install it on another laptop with XP PRO - fail as with my PC. It seems that Windows XP Pro is not good for CS3 or CS4, BUT it did months before in my old unbranded PC.
Help! I really want to install that stuff.
Best Regards,
Westmidlander

I was only speaking very generally... This is all common sense...
Adobe and other software makers are moving on from XP in their development. Thus XP becomes more and more troublesome to use as the likelihood of problems increases.
In the case of installation, a lot of very specific things are required of an installer so that it can work on Windows 7. The User Account Control (UAC) system and other security measures such as file permissions have to be completely and properly satisfied to install software on the newer systems. Indeed, the application itself even has to work differently to be compliant - reference the recent 12.0.2 issues with loading scanner drivers for example, or the fact that Photoshop needs to put some things under C:\Users\... now that always used to be put under C:\Program Files\Adobe\...
It's not hard to imagine that Adobe isn't testing software as thoroughly on XP as they once did either. Perhaps they missed one of the quirks of XP in pursuit of getting it to install properly on Windows 7.
You're putting a new cutting edge software application on an operating system designed nearly 10 years ago (an epoch in high tech). That you don't see even more problems is a testament to Adobe's committment to support XP.
-Noel

HP Deskjet and Officejet Full Feature Software and Drivers - Fatal error during installation

The "HP Print and Scan Doctor" reports software install problem on the scanner text.
In 2008 I bought an HP Pavilion Elite with Vista with a HP OfficeJet 5610 All-In-One connected through USB. About a year ago I upgraded to Windows 7 and print and scan worked OK. Last week I received an e-mail from HP for HP Print and Scan Doctor (ver 4.3) and installed it. I have had a problem trying to install the software updates that it said that I need. I have uninstall and reinstalled many times.
The HP Print and Scan Doctor said that the printing works but the scanner part fails at Registery, HP Scan Flow Manager, and Front Panel Test.
Any help would be appreacited.
The HP Print and Scan Doctor reports:
A later version of software is available for this product.
I used the install file: AIO_CDB_NonNet_Full_Win_WW_130_141.EXE.
It usually gets:
Sample Error log file:
This question was solved.
View Solution.

Hello NotHome,
Welcome to the HP Forums!
I understand you're receiving a "Fatal Error" during the installation. I will do my best to assist you! I would start off by following this HP document on Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
Please post your results, as I will be looking forward to hearing from you.
Have a great night.
I worked on behalf of HP.

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

Similar Messages

Maybe you are looking for