Cisco Sg500X inter vlan routing - Cisco can you please help - holding up a project

Hey guys
I am simply trying to get inter vlan routing working on an SG500X operating in standalone mode.
I have setup a couple of vlan interfaces on the switch which I assume are routed automatically when ip routing is enabled.
I can ping these vlan interfaces from a pc on the appropriate VLAN (ie - I can ping what should be the default gateway and the gateway and IP are setup correctly on the pc's in question but no traffic will pass from pc to pc.
Have probably missed something obvious - any help would be greatly appreciated, config below:
skelta-dist#sh run
config-file-header
skelta-dist
v1.3.0.62 / R750_NIK_1_3_647_260
CLI v1.0
set system queues-mode 4
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
vlan database
vlan 2000,3000,4092-4093
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
bonjour interface range vlan 1
hostname skelta-dist
line console
exec-timeout 0
exit
line ssh
exec-timeout 0
exit
line telnet
exec-timeout 0
exit
logging console debugging
username admin password encrypted 54f0197510fc8f980214826ad98ecc0291956ebc privilege 15
username cisco password encrypted 007253f1436da456a0880a66bbcc7c1b4a3af284 privilege 15
username readonly password encrypted 9a27718297218c3757c365d357d13f49d0fa3065
snmp-server location "Skelta comms room"
snmp-server contact [email protected]
ip http timeout-policy 0
interface vlan 1
ip address 1.1.1.1 255.255.255.0
no ip address dhcp
interface vlan 2000
name backup
ip address 192.168.50.241 255.255.255.0
interface vlan 3000
name user
ip address 10.129.53.241 255.255.254.0
interface vlan 4092
name server
ip address 10.129.38.241 255.255.255.0
interface vlan 4093
ip address 10.129.100.241 255.255.255.0
interface gigabitethernet1/1
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/2
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/3
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/4
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/5
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/6
switchport mode access
switchport access vlan 3000
interface gigabitethernet1/7
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/8
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/9
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/10
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/11
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/12
switchport mode access
switchport access vlan 4092
interface gigabitethernet1/13
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/14
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/15
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/16
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/17
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/18
switchport mode access
switchport access vlan 4093
interface gigabitethernet1/19
switchport mode access
switchport access vlan 2000
interface gigabitethernet1/20
switchport mode access
switchport access vlan 2000
interface gigabitethernet1/21
switchport mode access
switchport access vlan 2000
interface gigabitethernet1/22
switchport mode access
switchport access vlan 2000
interface gigabitethernet1/23
switchport mode access
switchport access vlan 2000
interface gigabitethernet1/24
switchport mode access
switchport access vlan 2000
interface tengigabitethernet1/1
channel-group 1 mode on
interface tengigabitethernet1/2
channel-group 1 mode on
exit
macro auto disabled
macro auto processing type host enabled
macro auto processing type ip_phone disabled
macro auto processing type ip_phone_desktop disabled
macro auto processing type router enabled
macro auto processing type ap disabled
ip helper-address all 0.0.0.0 7
skelta-dist#sh ip route
Maximum Parallel Paths: 1 (1 after reset)
IP Forwarding: enabled
Codes: > - best, C - connected, S - static,
R - RIP
C 1.1.1.0/24 is directly connected, vlan 1
C 10.129.38.0/24 is directly connected, vlan 4092
C 10.129.52.0/23 is directly connected, vlan 3000
skelta-dist#sh arp
Total number of entries: 3
VLAN Interface IP address HW address status
vlan 3000 gi1/4 10.129.53.1 a4:5d:36:18:12:d6 dynamic
vlan 4092 gi1/12 10.129.38.1 04:7d:7b:5b:f1:1f dynamic
vlan 4092 10.129.38.2 a4:5d:36:18:12:d6 dynamic
These are the two VLANs and above are the two ARP entries for the pc's.
and these are the default gateways:
skelta-dist#sh ip interface
IP Address I/F Type Directed Precedence Status
Broadcast
1.1.1.1/24 vlan 1 Static disable No Valid
10.129.38.241/24 vlan 4092 Static disable No Valid
10.129.53.241/23 vlan 3000 Static disable No Valid
10.129.100.241/24 vlan 4093 Static disable No Valid
192.168.50.241/24 vlan 2000 Static disable No Valid

Hi Rajeevsh
Ip routing is turned on, the correct connected routes are in the route table, I can see the arp entries for the two pc's but the two pc's cant ping each other (windows firewall is turned off).
I CAN ping the vlan interfaces from both pc's but the pc's cant talk to each other.
The ports are in untagged (switchport access) and obviously in the correct vlans
skelta-dist#sh ip route address 10.129.38.1
Maximum Parallel Paths: 1 (1 after reset)
IP Forwarding: enabled
Codes: > - best, C - connected, S - static,
R - RIP
C 10.129.38.0/23 is directly connected, vlan 4092
skelta-dist#sh ip route address 10.129.53.1
Maximum Parallel Paths: 1 (1 after reset)
IP Forwarding: enabled
Codes: > - best, C - connected, S - static,
R - RIP
C 10.129.53.0/24 is directly connected, vlan 1
skelta-dist#sh arp
Total number of entries: 2
VLAN Interface IP address HW address status
vlan 1 gi1/4 10.129.53.1 a4:5d:36:18:12:d6 dynamic
vlan 4092 gi1/12 10.129.38.1 04:7d:7b:5b:f1:1f dynamic
skelta-dist#sh ip interface
IP Address I/F I/F Status Type Directed Precedence Status
admin/oper Broadcast
10.129.38.241/23 vlan 4092 UP/UP Static disable No Valid
10.129.53.241/24 vlan 1 UP/UP Static disable No Valid

Similar Messages

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

HT4528 My IPhone Bugged out/It is currently in the reset mode. I need to exchange all of my contacts from my Yahoo acct. to my new IPHONE. Can you please help me?

Hello ,
I purchased my IPHONE about 2 months ago. I am visiting family in DE & this tuesday it starting to go off & on by itself. Then the icons looked like they were floating . Then I could not call or text . The SIRI device would not work. Then it would shut down then the apple icon would reappear. I took it to a verizon dealer in Rehoboth DE & they said it BUGGED OUT/It is in a RESTORE MODE. It will not turn on. We could not transfer anny of my pics or contacts. I never even had a chance to back up the memory on ITUNES.
The tech @ Verizon said to contact APPLE to trouble shoot and try and transfer the contacts from my yahoo acct.
Can you please help?
Gina

set up your yahoo account in mail, contacts, calendars as an Exchange Account and you should be able to get your contacts from Yahoo from there.

My ipod touch is stuck on the 4.2.1 software, its a 3rd gen as well i was just wondering why i can not get the lastest update can you please help me with this issue

i have been having an issue with updating my ipod touch for some time now and i can not seem to get it to update to the lastest update. it is stuck on 4.2.1 software and i can not update it to 4.3 or any other ios software update. can you please help me to solve this issue.

It sounds like you actually have a 2G iPod Touch which can only go as high as iOS 4.2.1. If it's an 8 GB iPod Touch it's definitely a 2G iPod Touch as there was never such a thing as a 3G 8 GB iPod Touch. See this article to help verify what generation iPod Touch you have.
Identifying iPod models
B-rock

I wanted to update my itunes and it didn't update and now it wont open so i had to uninstall it and it wont install now at all can you please help?

Hi
I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?

Hey maryncomiskey,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M.

I entered new fields in a form that was created last year to update it. However, now when I view the responses, they are listed as Column 1, Column 5, etc. It doesn't show a label for the actual field when I view the responses. Can you please help?

I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

I have got 2 iPad Air one of it is not logging me in because I have forgotten the pass code and have logged out from iCloud by accident. Can you please help me to use my iPad.

HI
I have 2 IPads, I am unable to use one of it because I have forgotten my pass code and also logged out from iCloud accidentially. Can you please help me to solve this problem.
Cheers
Raveena

Follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

HT1688 Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's ATT service plan. They paid the bill for my service. Since, I ha

Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work for more than just a phone, and a paper weigh?
PLEASE HELP ME!!!!!
Jason
Sent from my iPhone
<Email Edited by Host>

Wow... you seriously over paid for an iPhone.
That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

Can you please help me write below query in efficient way

Hello-
I have wrote one query and its very slow to get the data because i am counting the code at every column from the table in from clause.
SELECT SUM(diag_total) diag_total,
SUM(diag_complete) diag_complete,
SUM(diag_remaining) diag_remaining,
SUM(diag_declined) diag_declined
FROM (SELECT hpc.dmpc_hicn,(SELECT COUNT(DISTINCT d.msd_icd9_ref)
FROM d4c_map_suspects_to_diagnosis d
WHERE trim(d.msd_sd_hicn) = trim(hpc.dmpc_hicn)) diag_total,
(SELECT COUNT(DISTINCT dd.dspd_icd9)
FROM d4c_suspect_provider_diagnosis dd
WHERE dd.dspd_ds_id_ref = 1000
AND trim(dd.dspd_hicn) = trim(hpc.dmpc_hicn)
AND trim(dd.dspd_npi) = trim(hpc.dpmc_provider_no)) diag_complete,
-- AND hpc.dmpc_ss_id_ref = 1020) diag_complete,
(SELECT COUNT(DISTINCT dd.dspd_icd9)
FROM d4c_suspect_provider_diagnosis dd
WHERE dd.dspd_ds_id_ref = 1010
AND trim(dd.dspd_hicn) = trim(hpc.dmpc_hicn)
AND trim(dd.dspd_npi) = trim(hpc.dpmc_provider_no)) diag_remaining,
-- AND hpc.dmpc_ss_id_ref = 1020) diag_remaining,
(SELECT COUNT(DISTINCT dd.dspd_icd9)
FROM d4c_suspect_provider_diagnosis dd
WHERE dd.dspd_ds_id_ref = 1020
AND trim(dd.dspd_hicn) = trim(hpc.dmpc_hicn)
AND trim(dd.dspd_npi) = trim(hpc.dpmc_provider_no)) diag_declined
--AND hpc.dmpc_ss_id_ref = 1020) diag_declined
FROM d4c_provider_assignment pc, d4c_hicn_provider_claims hpc
WHERE pc.pa_assignedto = &imrrid
AND trim(pc.pa_providerid) = trim(hpc.dpmc_provider_no));
Can you please help me in this?
Thanks in advance.
Kind regards,
Nik

May be this?
You dont even need sum as we are doing count for the whole data at a time. Please check the results and let us know if there is any issue.
SELECT COUNT (DISTINCT d.msd_icd9_ref) diag_total
      ,COUNT (DISTINCT CASE WHEN dd.dspd_ds_id_ref = 1000 THEN dd.dspd_icd9 END) diag_complete
      ,COUNT (DISTINCT CASE WHEN dd.dspd_ds_id_ref = 1010 THEN dd.dspd_icd9 END) diag_remaining
      ,COUNT (DISTINCT CASE WHEN dd.dspd_ds_id_ref = 1020 THEN dd.dspd_icd9 END) diag_declined
FROM d4c_provider_assignment pc
      ,d4c_hicn_provider_claims hpc
      ,d4c_suspect_provider_diagnosis dd
      ,d4c_map_suspects_to_diagnosis d
WHERE     pc.pa_assignedto = &imrrid
       AND TRIM (pc.pa_providerid) = TRIM (hpc.dpmc_provider_no)
       AND TRIM (dd.dspd_hicn(+)) = TRIM (hpc.dmpc_hicn)
       AND TRIM (dd.dspd_npi(+)) = TRIM (hpc.dpmc_provider_no)
       AND TRIM (d.msd_sd_hicn(+)) = TRIM (hpc.dmpc_hicn);

HT1212 My iPod touch is disabled after too many attempts and I want to enable it without getting it clear so can you please help me out in this....

My iPod touch is disabled after too many attempts and I want to enable it without getting it clear so can you please help me out in this....

A data recovery company MAY be able to do it for a price. The Disabled is a very good security feature.
JWhy not just restore from the last backup you have?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can you please help me in creating a stored procedure which can create a tablesapce in a specified location ?

Hello ...
Can you please help me in writing a procedure which can create tablespace. like i have a requirement that
through sql query i need to get the location of where the data file of the newly created tablespace need to be stored.
I need to store the location of the datafiles in a variable and i need to use that variable for specifying the location of the data file in newly created data file.
please help me writing this procedure.....
Regards vinay raj.
Thanks in advance..

select distinct substr(file_name,1,instr(file_name,'/',-1)) from dba_data_files;
Run this in a few of your databases and see how often you ONLY get one row returned.
Normally there is no "default" file system for data files (read about the DB_CREATE_FILE_DEST parameter and Oracle Managed Files for the exception to that).
You could pick the same file system as an existing tablespace, but even then there is no guarantee that the file system has sufficient space for the new tablespace - you have to check that OUTSIDE the database.
Given the query at the top it is pretty simple to create a SQL script that generates a SQL script. This can be run in any database via sqlplus, and then the generated script can be edited as needed and run immediately, under human control, avoiding surprises.
set echo off
set feedback off
set heading off
set lines 100
spool myts.sql
select distinct 'create tablespace MYTS DATAFILE '''||substr(file_name,1,instr(file_name,'/',-1))||'myts01.dbf'' size 40M ONLINE;' stmt
from dba_data_files;
spool off
For example, if you find there are multiple filesystems to choose from, run this then delete the filesystems you don't want from the generated script. If you find there is only one file system but it is too full, work with your SA or storage to to add space or allocate a new file system, then modify the generated script accordingly.
This example assumes a traditional file system, on a UNIX-style OS, not using Oracle-Managed files. ASM or RAW will have a different format for the data file location, of course.

Can you please help me out the Info Cubes info for Budget Execution?????

Hi,
Can you please help me out the Info Cubes info for Budget Execution and Cash Management.
Thanks in advance,
Andy

Take the memory card out of the camer and put it in a card reader. When it mounts on the desktop select it and try to change the name. However, that might make it incompatible with the camera. You'll just have to try and see.
OT

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Cisco Sg500X inter vlan routing - Cisco can you please help - holding up a project

Similar Messages

Maybe you are looking for