Cisco SMA to WSA connection not establishing
Hai, i was trying to add my cisco ironport WSA to SMA (both are in same subnet). I enabled monitoring service like
Centralized reporting and Centralized Configuration Manager in SMA. After i added the WSA ip and hostname in SMA and try to establish connection, but after several minutes it is showing timeout error.
Can you please let me know what should be the reason??? Do i need to enable anything on cisco WSA ??
Regards,
Mohamed Fayz
Hi, actually I have the same problem, when trying to establish a connection from SMA to my WSAV (virtual web security appliance). I cannot add anymore my WSAV to my SMA. We have checked the network and connectivity is working for sure. I have also tried connecting from SMA command line to the WSAV and this is working (for ping and also a telnet to the SSH port 22 to ensure that SSH server on my WSAV is responding to my SMA and I get the prompt showing also the SSH FreeBSD version).
Here the output for telnet from SMA to WSAV port 22, which looks good:
cisco.example.com> telnet 172.44.21.5 22
Trying 172.44.21.5...
Connected to 172.44.21.5.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.4p1 FreeBSD-20100308
^]
telnet> q
Connection closed.
The connection from SMA to WSAV was working before, but just for testing purposes, I disabled WSAV from the SMA (I wanted to take some screenshots for our team on how to bind WSAV to the SMA and now I cannot establish again the connection --> same error: time out error after a few minutes). I've already reset SMA completely and reinstalled and also rebooted the both devices several times but ending again with the same timeout error ... WSAV is 8.0.5 and SMA is 8.3.6-014 (which is good due to the compatiblity matrix).
I will go on and do some testing, as I need this working again until monday...
In the meantime if you have suggestions, feel free to give me some hints :)
I'll come back to you if I would find a solution or some kind of explanation.
Greetings
Ciro
Similar Messages
-
Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
EdwardHi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
SAP Support connection not established.
Dear all
When I try to connect to sap for R3 connection. It shows green icon to say the connection is ok.
and connection status will be displayed like this.
Even it shows it is connected. RFC not established and not allow to sap service support.
once I click on connect following message will be displayed.
pls provide your sudgessions.
Thanks
priyanDear All..
The issue is resolved. Thats because of the SAP router licence renewal issue. [expired].
It could be checked by sapgenpse get_my_name -v -n validity on sap router.
Thanks All -
Hello!
I'm having troubles syncing now that I have iOS7.0.4 on my iPhone 5 - I keep getting an error message stating "iTunes could not sync information to the iphone because a connection could not be established to the iphone". It's also taken home video's and some songs off the iphone which previously played & Im technically challenged at best so any help would be greatly appreciated before I throw the phone out in frustration!Hi DannyGo and welcome to the forums!
What is the firmware version of your router? You can check it by logging in the rotuer's set up page. Please check if it's the same as the version found in the downloads tab of this link.
http://homesupport.cisco.com/en-us/wireless/lbc/BEFW11S4
If not, please upgrade and reconfigure the settings. Please refer to the links below.
Checking the Linksys Router’s Firmware
Upgrading the Linksys Router's Firmware
Setting-Up a Router with Cable Internet Service - if you are on cable
Setting-Up a Router with DSL Internet Service - for DSL connections
Setting-Up the Wireless Settings on a Router
Let me know how it goes. -
I was looking through the firewall section for the SMA to see which ports need to be opened between the devices. Is there a guide or a list of ports that need to be opened between the devices.
Here is a list of ports that I see (i used asyncos IPs for reference)
ftp, ssh, telnet, smtp, http, 81, 82, 83, 161, 443, 2222, 6025.
Let me know if this is a complete list as of 7.9.
Sent from Cisco Technical Support iPad AppHi Tarik,
Everything the SMA has to do on a WSA should be done via TCP port 22 on the WSA.
-Vance -
Vixia HF50 - "Monitor while Out" connection not established
I have the HF50, win 7 home edition laptop and linksys wrt54gs2 v1 and trying to connect with an iphone using the "monitor while out" function.
- streaming from camera to iphone works fine, while in recording mode
- when in play mode connecting to access point works, and I can find the camera in the networks of my laptop
- When in streaming mode and trying to connect with "monitor while out", I get an error message that I have to change the port settings.
- the port is set to 80, and I entered a password (into the camera)
- I ran the checking tool that is supposed to check the system capability to use the "monitor while out" function.
- 1st check says system is not properly configured, router does not support "UPnP. I checked, the router is in fact capable of UPnP and this function is enabled
- Ran the tool again and not its saying router does not allow port mapping. I think it does, because I have some ports open for the xbox. Otherwise, I don't have much of a clue....
- I opened port 80 entering the IP of my computer and the checking tool says nothing found that would prevent me from using .....
- I opened port 80 to the IP address of the camera, however the camera won't connect allays the same error.
- I played with the settings in the router, but no success.
- running the checking tool seems to give random results between router does not provide UPnP, no port mapping and no issue found.
I suspect the issue is in the router, but I don't have any idea what to try out next.
Any help is appreciated.Yes, our psearch connections are indeed closed when an entry change triggers the DS server to write to those connections.
Now we just have to make sure there will be entry change to trigger connection clean up before our DS reaches nsslapd-maxpsearch.
Thank you. -
Target connection not established
Hi,
After deployment the target table and package script is getting created in repository rather than target.
Plzs help..
ThanksYou target module has a location associated with it. When you deployed you were prompted to 'register' this location by providing the username, password, host, port and DB service name. This is where target tables and mappings will be created. I suspect you might have provided the wrong credentials when you registered your location. Test this by creating another location, associating the target module with this new location (Properties -> Location) and deploying again, this time entering the correct info when prompted to register the new location.
Nikolai -
Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
SurendraI'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
SSLv3
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
TLSv1
EDH-RSA-DES-CBC3-SHA Kx=DH Au=RSA Enc=3DES(168) Mac=SHA1
DHE-RSA-AES128-SHA Kx=DH Au=RSA Enc=AES(128) Mac=SHA1
DHE-RSA-AES256-SHA Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=DH Au=RSA Enc=Camellia(256) Mac=SHA1
DES-CBC3-SHA Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1
AES128-SHA Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1
AES256-SHA Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(128) Mac=SHA1
n/a Kx=RSA Au=RSA Enc=Camellia(256) Mac=SHA1
RC4-MD5 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5
RC4-SHA Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas? -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
I am trying to update the new OS system on my iPhone 4, however, when I connect to iTunes and try to download, I keep getting an error message that says the connection is not established. I ran a diagnostics test and everything passed, however, I'm not sure why I keep getting an error message when the software is at the end of downloading.
Any tips?Disable your firewall/security software.
-
Clean Access Server could not establish a secure connection
I have a OOB Real IP GW setup on v4.1.2
I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
I have 2 problems:
A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
& CAS.
Any ideas?To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though. -
I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network. -
I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMHi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM -
The Network Adapter could not establish the connection;
Hi
I am using Oracle 9i JDeveloper Version 9.0.3.5.
While running tutorial i am facing following error:
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SYSTEM-ERROR. Tokens: MESSAGE = Io exception: The Network Adapter could not establish the connection; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:988)
at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: Io exception: The Network Adapter could not establish the connection; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980)
at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3675)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:352)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:365)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:536)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:328)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.apps.fnd.security.ConnectionManager.dbConnect(ConnectionManager.java:1194)
at oracle.apps.fnd.security.ConnectionManager.dbConnect(ConnectionManager.java:1121)
at oracle.apps.fnd.security.AppsConnectionManager.makeGwyuidConn(AppsConnectionManager.java:664)
at oracle.apps.fnd.security.AppsConnectionManager.getGwyuidConn(AppsConnectionManager.java:736)
at oracle.apps.fnd.security.AppsConnectionManager.makeGuestConnection(AppsConnectionManager.java:575)
at oracle.apps.fnd.security.DBConnObj.<init>(DBConnObj.java:240)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.fnd.common.Pool.createObject(Pool.java:1187)
at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:946)
at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:703)
at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:232)
at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1773)
at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2460)
at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976)
at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494)
at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304)
at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147)
at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008)
at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931)
at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570)
at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827)
at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:686)
at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:846)
at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: Io exception: The Network Adapter could not establish the connection; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980)
at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3675)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:352)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:365)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:536)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:328)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.apps.fnd.security.ConnectionManager.dbConnect(ConnectionManager.java:1194)
at oracle.apps.fnd.security.ConnectionManager.dbConnect(ConnectionManager.java:1121)
at oracle.apps.fnd.security.AppsConnectionManager.makeGwyuidConn(AppsConnectionManager.java:664)
at oracle.apps.fnd.security.AppsConnectionManager.getGwyuidConn(AppsConnectionManager.java:736)
at oracle.apps.fnd.security.AppsConnectionManager.makeGuestConnection(AppsConnectionManager.java:575)
at oracle.apps.fnd.security.DBConnObj.<init>(DBConnObj.java:240)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.fnd.common.Pool.createObject(Pool.java:1187)
at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:946)
at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:703)
at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:232)
at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1773)
at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2460)
at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072)
at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976)
at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494)
at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304)
at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147)
at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008)
at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931)
at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570)
at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827)
at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:686)
at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:846)
at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351)
at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144)
at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80)
at test_fwktutorial._jspService(test_fwktutorial.jsp:45)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
I have checked all the setups. Its as per document.
I will appreciate any help on this.
Thanks & Regards
SamirHi,
according to the message, the database is not accessible. This can be because the database is down or the database connect information points e.g. to a wrong port
Frank
Maybe you are looking for
-
ATV zone 2 issues with Yamaha A700 receiver
Short time lurker, first time poster. In any event, I recently purchased ATV and hooked device to my Yamaha A700 receiver at HDMI input 3. Sound and video quality if perfect when streaming to zone 1. However, when attempting to push music to zone 2..
-
TS4002 I am having getting my hotmail messages on Apple Mail
Just got a Mac and use other mobile Apple devices. My iPad and iPhone are easily synching my email accounts (gmail and hotmail). I am having trouble getting my hotmail on my iMac. I have set up system preferences with both of my accounts. Gmail i
-
Hi all, I have an SHPMNT05 IDOC in SAP with custom segments. In the custom segment, I need to add a new field. With this change, the EDI DESADV is also affected. May I know the steps on how to proceed on this? I think further coordination with the ED
-
How to disable script debug? Alt key brings debugger window.
Here is detailed problem description: http://forums.adobe.com/message/2678671 In short. When batch is being processed in background (photoshop window is inactive) pressing the Alt key brings the debugger window (ExtendScript Toolkit - Fit Image.jsx).
-
Hi all, Please provide me the New GL config Steps for Implementation. Full Points will be rewarded [email protected] Thanks NTH Edited by: NTH on Apr 14, 2008 1:30 PM Edited by: NTH on Apr 14, 2008 1:31 PM