Cisco Small Business Office Manager and SF300 switched

Hello
As I saw the the office manager cann't manage SF300 switches, what alternative do we have ?

Yes, this will work.  I have it up and running.  Use the site to site vpn wizard on the ASA and then on the WRVS4400N, make sure to select the settings below.  *You need to disable PFS on the ASA either during the wizard of afterward under vpn properties/advanced.
Phase 1 >
Mode = IKE w/ Preshared Key
Encryption = 3DES
Auth = SHA1
Group = 1024 bit
key lifetime = 86400
Phase 2 >
Encryption = 3DES
Auth = SHA1
PFS = Disable
Group = 1024 bit
key lifetime = 3600

Similar Messages

  • Plug and Play for Cisco Small Business 300 Series Managed Switch

    Good day
    what are the Auto-Install options available for the Cisco Small Business 300 Series Managed Switch ?
    It would appear there are none, the operating system is not the standard IOS I'm used to.
    Would like to use it with Cisco Prime Infrastructure's PnP Gateway capability.
    Regards
    Pierre

    Prime Infrastructure uses and assumes a CNS (Cisco Network Services) agent on the other side when enabling "plug & play". 300/500 Series do not run IOS and does not include a CNS agent, but there is a way to enable auto-configuration. The switches support DHCP Autoconfiguration (using DHCP options 66, 67, and others) whereby they automatically download their config from a TFTP server at boot time. This allows an administrator to put the configs for all the switches on a TFTP server and simply boot a factory-defaulted switch in order to get its config.
    Attached is a document showing how this is done.
    Hope the information would be of assistance.

  • LMS 3.2 and Cisco Small Business Switches

    Hi there,
    I'm currently using LMS 3.2 to monitor my network. We've recently purchsed a few of the Cisco Small Business Switches, the SF 300-24 model to be exact. They're considered 'managed switches' (tho thier CLI is terrible) and I would like to monitor them in CWLMS. My problem is that once I add it to CS, it doesn't resolve to anything, just sits there as a blue box with a question mark. I'm assuming this means that these devices are not (currently) supported by LMS 3.2 - do you know if that will change, or how I can go about managing this device with LMS 3.2?
    Thanks

    Unfortunately that series of products is not supported in any version of LMS (or even Cisco Network Assistant - CNA).
    Cisco provides the FindIt utility to manage them:
    http://www.cisco.com/en/US/products/ps10660/tsd_products_support_series_home.html
    Hope this helps.

  • Configuring SNMP on Cisco Small Business 300 Series Managed Switch

    Please can anyone help me to configure SNMP on Cisco Small Business 300 Series Managed Switch?
    Thanks

    Hi Anton,
    Please remember to enable SNMP service first: Security > TCP/UDP Services.
    http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=3b13278d9ef9402a8fef57df6d972078_Enable_SNMP_Service_on_300_Series_Managed_Switches.xml&pid=2&respid=0&snid=2&dispid=0&cpage=search
    also you may find useful documents for community configuration etc on our kb server:
    http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=183cae2148d445b2a07473ee18c93ffa_SNMP_Communities_Configuration_on_a_300_Series_Managed_Switc.xml&pid=2&respid=0&snid=2&dispid=0&cpage=search
    Let us know if you have any problems.
    Aleksandra

  • Accounting on a Cisco Small Business SF300-08

    Hello,
    The "Cisco Small Business 300 Series Managed Switches Administration Guide" and the data sheet indicate that this switch can do accounting requests with a Radius server. On the SF300 switch interface/CLI, there is only the authentication port, the accounting port can not be set (and nothing is sent by the switch to the default port). I suppose that the SF300-08 does not handle accounting. Maybe I have to change for another model. Could you give me another model in the same range price ?
    Thanks,
    Laurent.

    Hello Laurent, I am pleased the 1.2.5.70 has resolved this issue.
    Please keep advisory the 1.2.5.70 firmware has also been pulled for now.
    Pease note we have identified a potential issue with the 1.2.5.70 update for the Series 200, 300, and 500 switches. As a precautionary measure, we have taken down the 1.2.5.70 release while we determine the cause of the issue, severity, and scope. We will either re-post the release or post an updated version depending on the outcome of our analysis.

  • Cisco Small Business Pro Switch pricing...

    As a very long time Linksys user I am not totally unhappy that the Linksys name is no longer part of the product designation.
    We provide IT management and support to many SME businesses. Part of our management functions on behalf of our clients is to ensure value for money. From a Linksys aspect, in the past this meant a trade-off between value (low-cost - a Linksys benefit) and reliability and stability.
    On the one hand, we continuously had to monitor and test firmware upgrades before implementation. On the other hand we have many clients still running netwrok VPNs on 6 year old BEFVP41 units with no outages at all due to the equipment...
    With this experience in mind, we are anticipating that the Small Business Pro equipment is likely to be fully specified and tested, for which we will gladly recommend to our clients the higher prices commensurate with that reliability and stability.
    From this perspective, we have tested the SA520 and the AP541N and the initial results are favorable - they appear to be an improvement on the Linksys RVS4000 and the RV042. Pricing is higher, but not exorbitantly so.
    When looking at the switch pricing, however, I was unimpressed to find that the 24 port Gigabit switch is north of $1,300 - amost 3 times the price of the SRW2024.
    I realize that pricing is a corporate decision by Cisco - and I have no doubt that they do not want to have their Small Business Pro series cannibalizing the corporate switch sales. However, we cannot recommend this to client management as it is excessive. Given that we set the standards for all of our clients (and ALL of our clients are currently using LInksys products as an exclusive standard - we do not permit any other networking equipment), our choice is difficult:
    Do we stick with the Cisco Small Business Pro for the WAN aspects of client networks and evaluate other vendors for the LAN elements?
    Given that we have been badly burned by both Linksys One and Microsoft ResponsePoint, we specifically no longer specify IP voice systems by network vendors, so any infrastructure-specific advantages in this regard are not an issue.
    Any other perspectives on this?

    The Small Business Pro ESW 500 Switches actually differ from their Linksys and Cisco Small Business counterparts by these features:
    Better interoperability with Cisco and Cisco Small Business Pro products
    Cisco Discovery Protocol (CDP)
    EtherChannel
    Cisco Configuration Assistant configurability and manageability
    Integration with the Cisco Smart Business Communication System (SBCS) solution
    Smartport roles for easy configuration of switchports, both in the ESW Web GUI and in the Cisco Configuration Assistant program
    Ability to connect Cisco Unified IP Phones into an ESW switch as part of a SBCS deployment
    ESW 500 switches have a higher level of support than the Linksys and Small Business counterparts because Cisco Small Business Pro Service is offered on the ESW 500 switches
    The ESW 500 Web GUI is actually similar to the GUI found on the Linksys and Cisco Small Business counterparts. ESW 500 might actually be a better option with the SA500 because:
    CCA 2.2(1) and later can manage the SA500, the AP541N, and the ESW 500 switches, even if they are deployed outside of the SBCS solution.
    Cisco Small Business Pro Service is available on ESW switches, but not on Linksys or Cisco Small Business products

  • Trying to upgrade computers and server on my small business office

    I'm upgrading 4 computers and a server in my small business office (one for one replacement on all). Would I replace the server (computer) first and then the 4 computers or can I replace the computers and then the server? They are all Dell products.
    I use a tape drive to do daily backups of my data. Can I just create a cloud backup account and put the data there and then download it back to that specific computer? I hope this makes sense. I haven't done this in years and trying to save a bunch of money
    than paying some techs.
    Thanks in advance, Cicely

    -->The old computers and server is XP and the new ones are all on Windows 8.
    Windows Server 2003?
    -->I guess I better think
    about this or do some extensive research.
    Yeah...great.
    Best,
    Howtodo

  • Cisco Small Business 300 VLAN Features?

    Hi Everyone,
    Please help me to understand some features of Cisco Small Business 300 Series Managed Switches. one of this is "Static routing/Layer 3 IP routing between VLANs allows for communicating across VLANs without degrading application performance" what is this means can i create VLAN or just VLAN can pass thrue this kind of switch? how about this feautres from Cisco Catalyst 2960 Series Switches " The ability to set up virtual LANs soemployees are connected by  organizational functions, project teams, or applications rather than on a  physical or geographical basis" what is the difference of this features of this different model of switches? thanks...
    Raffy

    Raffy,
    This switch is a layer2 or a layer 3 switch, which ever you set it to.
    If you have it in layer 3 mode the switch can do routing between vlans.  If in layer 2, you can setup a trunk port to a router that understands vlans and allow inter-vlan connectivity that way.
    Its based on what your router can do.  If your router understands vlans, then you can leave it in layer 2 mode and create your vlans and trunk to the router.
    If it does not understand vlan tagging, you can put the switch in layer 3 and put an ip address on the vlan interfaces and let the switch be the gateway for the vlans.  Then the switch will do the routing from one vlan to the other.

  • Web interface no loading in Cisco Small Business 300 Series

    Hi everyone!
    I have a Cisco Small Business 300 Series Managed Switches as a floor switch. It is working fine (apparently), but I can no longer get into the web interface to manage it. The web page load till 70% and stops loading. Can someone suggest a solution please?
    Thanks

    Hello,
    I was hoping to see error :-) Bu it looks like you have a console access with no issue. Can you test web access when PC is directly connected to switch? Do you observe the same issue?
    Aleksandra

  • Cisco small business WAP561

    Hi All,
    My initial wireless devices were acting up so I decided to change to Cisco Small business 561.
    This is my issue, I already have a DHCP server and i do not want the AP to give another DHCP, all I want is for it to transmit internet and ask for password.
    Can someone please assist?
    Thank you

    Follow Step2 and 25 from
    http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=a64eee2d64184310b99dfaa8fc020ecb_Configuration_of_Setup_Wizard_on_the_WAP561.xml&pid=2&converted=0

  • Small business server 2003 and database 2008 r2

    Hello,
    I already use at work small business server 2003 and I would like to install sql serwer 2008 r2 express. And my questions is. Is there any possibility to install sql server 2008 express on small business server 2003 ? My database has a limitation of size
    to 4 gb. When i trying to add a new business contact in BCM i get a massage: could not allocate space for object in database because the 'primary' filegroup is full. i am very much appreciate for  help.

    You can install SQL express on SBS 2003.
    Maybe you can use het comments in
    this link.

  • Updating databae password in Business view manager and CMC

    Hi All ,
    We are carrying out a step of changing the database password on which the Infoview reports run.Currently the solution i know is to log on to Business View manager and change the password manually for each promopt. similarly i have to log on to CMC and go to report >Process>Database and enter the new password.
    We have 85 reports and their corresponding promopts. So we have to manually enter the password upto 150 times.
    Could you you please advise on a more efficient way to change the password.
    Thanks.

    If you're interested in getting the best performance for your DCP, try this article:
    [Crystal Reports XI R1 And R2 Dynamic Cascading Prompt Performance 1.8|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e073744a-693f-2b10-b5b8-b216437cb007]
    I'd recommend the chapter "Cascading LOV Data Access Tuning", it explains how you can configure your LOV to ensure on-demand access for each level of the LOV.

  • Dynamic IP Support on Cisco Small Business Cameras

    Hi,
    does cisco small business surveillance cameras support dynamic ip, if not any option is available to access cisco small business IP cameras thru Dynamic IP
    Regards
    Sushil

    Hi Sushill,
    yes the small business family of cameras support Dynamic IP address assignment, see attached screen capture as an example.
    regards Dave

  • Como cambiarle el Password a un Switch Cisco Small Business SF500-24 Y GG300-28P

    Hola tengo un problema tengo un Switch Small Business SF500-24 y el nombre de usuario y contraseña no lo tengo, estube viendo que entrando en modo Rommon uno puede configurarlo y cambiarle el password sin que se pierda la configuracion que tiene, lo que no encuentro es la forma de como entrar en modo Rommon, POR FAVOR NECESITO LA COMBINACION DE TECLA PARA ENTRAR EN MODO ROMMON EN ESTE MODELO DE SWITCH.

    Hola liriantech,
    Gracias por el tema.
    En los switches de la serie 200(más de 8 puertos )/300/500 estás capaz de recuperar la contraseña del usuario administrativo através de entrar en el boot menú. Los pasos son los siguientes: debes conectarte al switch através por serie. Después de verificar la conexión debes reiniciar el switch y prestar atención: durante el reinicio, después de la verificación del hardware, te aparecerá el banner de Cisco. Junto por abajo de aquello te saldrá la opción de pinchar Exit o Enter para terminar el proceso de carga. Debes prestar atención ya que aquella opción será disponible solo por 2 segundos. Através de parrar la carga te aparecerá el boot menú. Opción “3” se llama Recuperar la Contraseña, pincha “3” y 2 veces Enter. El switch continuará la carga pero te dejará entrar en modo privilegiado sin usuario y contraseña solo esta vez.  Ahora, através del acceso CLI, debes crear un usuario y añadir contraseña al aquello de nivel 15 en esta forma:
                    Switch#conf t
                    Switch(configure)#username <user> password <password> privilege 15
    Este usuario será disponible para las entradas siguientes.
    Te pedimos tratarlo e informarles cómo te ha salido.
    Una cosa más: en general el soporte en el fórum se ofrece en Ingles para que puedan todos los clientes acceder la información. Entiendo de que podría ser gran molestia pero te pido amablemente escribir en Ingles como lo puedas.
    Gracias por la atención y buenos días.
    .:|:.:|:. CISCO | Victor Apostolov | Network Engineer | Cisco Technical Support 

  • Migration Cisco Unified Communications Manager 6.1 to Cisco Small Business Edition 5000

    Hello,
    I want to know two things:
    1) I want to know if I have 1000 dlu. how many licenses would be in the new licenses for Cisco Unified Communications Manager Business edtition? Because i have Cisco Ip Communicator, Cisco Personal Communicator, Video Advantage and unified Messaging.
    2)To migrate data from my current CUCM what tool should I use? DMA?
    Thanks

    I can't assist on #1 but #2 is pretty much a regular upgrade. The only CUCMBE before having the 3 flavors we have now, has turned into the 5K option.
    There's no DMA as that's from Windows to Linux. It's either DRS (EXACT same source and destination version) or BAT.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

Maybe you are looking for