Cisco SRP527w can't find User Management tab

Hi,
Can anyone help me? I just bought a new Cisco SRP527w and I'm just new on this kind of equipment. I can't locate the user management tab as I'm trying to change the default password.
Also, I can't acess the internet. My dsl modem rj45 is connected to the WAN/LAN port with IP Static settings. What did I missed here? your help is much appreciated.

Hi Ronald,
In this case, I would be inclined to suggest that you try to use the SRP in place of the Bayan modem - this may be easier than managing the modem configuration to get traffic to and from the SRP efficiently. It's really your choice though at the end of the day.
If you replace the modem with the SRP, try the following (I referred to the following post for information):
Delete the second ADSL PVC you had configured above,
Edit the configuration of the first PVC (PVC0) and select:
Encapsulation = PPPoE
Username is your BayanDSL username with @sod at the end (i.e. myusername@sod)
Password is you BayanDSL password.
Set your VPI/VCI manually to 8 and 33 (or possibly 8/35 as you had before).
This should be enough. The IP address that Bayan has assigned for you should be assigned automatically during PPP initiation.
If this doesn't work, then it may be that your service is bound to the modem you have.
Andy

Similar Messages

Can't find user exit or enhancement at RGJVBR15

Hi everyone,
I need your help guys. Right now,i'm developed sapscript for billing statement (cash call and expenditure). I have finished the form but i have problem at print program RGJVBR15. This print program is called by RGJVBR10 (Tcode : GJ14 --> Hard Copy Billing).GJ 12 and GJ 13 is used to extract data that will be used by forms.
There is statement like this in RGJVBR15 at subroutine CREATE_EXPENDITURE (Line 1421 in include file RGJBF_I1) :
AT NEW C5_CURR. --> Group by funding currency
   PERFORM POPULATE_SPOOL_ID
ENDAT.
PERFORM F6100_PROC_... -> This will be used to open form,write form (sapscript)
AT END OF C5_CURR.
ENDAT.
The problem is that i want to change this logic. I want to change the standard logic (display report group by funding currency), i want to ignore this and instead using group currency. So there only one report produced with one currency only (if using standard logic there is more than 1 report based on funding currency). But i can't find user exit or enhancement in this SAP Standard Program. Is anyone know if there is user exit or enhancement in this program? I don't want to use implicit enhancement because it's will produce problem when client want to upgrade their system. Thank you.
Best Regards,
Satria

hi,
for tcode GJ14 user exits avaliables are
Exit Name           Description
JVA-IM-1             Joint Venture: Integration Manager Set Intercompany Lines
JVA_IM_2            User Exit Splitting
JVA_IM_3            User Exit Check Document
regards,
paras

I can't find and manage my photos in itunes

I can't find the photos tab anywhere on my itunes. Because of that I can't manage my photos. and I accidentally synced all of the photos from my pc to my iPod touch and there's no way of deleting it on the device itself. I tried almost everything like changing the screen resolution, re-installing itunes etc. Please help as i've been looking for an answer for a long time now.

The Photos tab will only appear when the iPod is connected. Click on iPod (which also only appears when the ipod is connected) - not the eject arrow:
and you will see the Summary pane. Click on Photos and (that I've highlighted) and this pane appears...
...choose the folder you want or turn off the Sync Photos option.

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

You cannot drag the effects themselves to the timeline. You add them to a clip in the Viewer, just as you have done.
If the clip was already in the timeline when you opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip. You don't drag it back to the timeline.
You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
Depending on the effect you add, you may have to render the timeline after adding the effect. But I don't think reverb requires immediate rendering. One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

Can I find the current tab in Terminal using applescript?

Running a script from the shell by prepending
#! /usr/bin/osascript
as part of my .profile, can I find the "current" tab using Applescript. Most of the time, the "current" tab will not be visible, as the shell is being initialised, or re-initialised.
I want to set the dircolors for my shell by determining the background color of the tab in which the shell is executing.

Under the Window menu you can activate any of the palettes that you want. In your case the Field tab is under the Object palette

Can I Add User Defined Tab Dialog From just like kTextFrameOptionsDialogBoss?

Can I Add User Defined Tab Dialog At Build-In kTabSelectableDialogBoss, just like kTextFrameOptionsDialogBoss?
If it is possible, How?
Pls Help Me...

Impliment IUnitOfMeasure with custom units.

Can't find the Reminders tab in Mail

Hello All:
I'm having trouble syncing Notes from my iPhone 3GS to my Mac Pro running 10.6.8.
I can't find the Reminders tab in Mail. Sync Notes is checked in iTunes. Any way I can find/add the Reminders tab?
Thanks!

If you update to iOS 4.3.3 you should then see it in the App Store app. If you have iTunes 10.3 on your computer you can also do it there. Otherwise I think that you'll have to go through your purchase history on your account in iTunes on your computer.

Can't find the security tab for group in Windows server 2012

can't find the security tab for group in Windows server 2012
but I can find it in Windows 2008 R2
so how to display the security tab for group in 2012?
Please click the Mark as Answer button if a post solves your problem!

Click on the View menu and ensure that "Advanced Features" is enabled/selected.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

I can't find the Firefox tab that takes me to edit and print et al. unless I have a little bitty screen.

I just got a new computer and got changed to windows 8, and the guy set it up with internet explorer when I was accustomed to using firefox. My son put it on firefox, but I can't find the firefox tab with access to edit, print, print preview, etc. , except when I have the firefox box on three quarters of the screen, which is too small. How do I get it to fill up the screen and still give me the little box so I can print? Please don't answer with an avalanche of gibberish, because my computer understanding is negligible.

Hi Senyax, how are you enlarging Firefox when you want it larger? These will give you different results:
(1) Maximize the window (middle button between _ and X)
You should still be able to see the top bar of the window with the orange Firefox button. If you can't see any of it, one of your Firefox settings files might be corrupted.
(2) Full screen (F11 key or orange Firefox button > Full Screen)
By default, nothing other than the website shows in full screen mode. Although you can have the tab bar and toolbar display (slide your mouse to the top of the screen and right-click a blank area of the tab bar, then uncheck "Hide Toolbars"), you cannot use the orange Firefox menu button in this mode.

Station Options - User Manager tab

Within the Station Options, I see the User Manager tab. If I use the default configure location, the Users.ini file will live in C:\Program Files\National Instruments\TestStand 3.5\Cfg\Users.ini. Is this where BOTH the development and target Users.ini file will live, or is this only the development location? If this location applies only to the development, where is the target location specified?

That's correct.
All of my deployments, locally and at our contract manufacturers, are connected to a network. For the CM's we provide an inexpensive server that is connected to the CM's network. The testers are connected to a network provided by the server. All test results go to the server. That makes it easy for both the CM and my company to get test results. Also, the sequence files, test steps, model files, etc. are all deployed to the server. This makes it simple to update all testers at once and I don't have to worry that one tester out of several and 3 thousand miles away missed getting updated. Servers are cheap.

Where can I find file manager, to manage files for my iPad Air?

Where can I find file manager, to manage files for my iPad Air?

There are some apps that allow for a decent amount of file management on the iPad! depending on what you want to do. Take a look at some of these.
http://appadvice.com/appguides/show/best-iPad-file-managers

I can't find the summery tab on the new itunes. please help!

I'm locked out of my ipod(4th generation). I have synced and downloaded the new itunes because that is what I had to do. Now I can't find the summery tab in itunes so I can restore my ipod. I tried to start over and now it says i don't have enough space to sync my ipod again. I don't do well with computers so someone please help!!??

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

Can't find the 'decoder' tabe in audio console wind

I just bought a x-fi fatalty. All drivers was installed.
However when I tried to set the spdif passthru to an external AV amp, I can't find the decoder tab in the audio console windows as shown in below screen capture I found on the web.
http://soundblaster.com/images/inline/articles/audio_console.jpg

Hi adrianmak?If you use spdif don?t need X-Fi decoder, when use spdif you send signal to a external decoder. Digital Connections, SPDIF and Dolby Digital Info[/b] ?Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded?audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To?go down this route, you must first have a?set of speakers or a decoder that?supports Dolby Digital.
In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in?your?soundcard options. What this does is?tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your?digital speakers/receiver will do all the decoding to give you full surround sound.
Please note that this?is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.?If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature,? you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right?sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=270">[/url]?What version you have?Try to update drivers from creative, MS Windows Update X-fi driver version?disable decoder tab.
Message Edited by Rad-Wulf on 2-04-200709:26 PM

I clicked on full screen option and know I can not find the options tab to go back to regulator screen

I clicked on full screen option and know I can not find the options tab to go back to the regulator screen

The F11 key will toggle full screen mode.

After iPhone connects to iTunes, can not find the photos tab for sync

After iPhone connects to iTunes, can not find the photos tab for sync. Thus, I can not copy some phototes from my Macbook to iPhone, But my iTouch can do this. I don't know why.

If you are using a mac, you use iphoto.
If you are on windows, you use whatever camera software windows uses.
Itunes does not import photos.

Cisco SRP527w can't find User Management tab

Similar Messages

Maybe you are looking for