Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!

Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

"The following errors occurred while trying to open this page." Why?

Dear all,
I'm running an online store at http://bubblething.com. I created it with iWeb 08. It crashed and I've been trying to recreate it, partly from images retreived by Apple from their "webarchive" and partly with images created fresh. I But I keep getting a dropdown error box saying "The following errors occurred while trying to open this page." Then there's a list of the missing images, and the images are all crossed out on my page. This seems to be happening unpredictably, sometimes just a few days after I've worked on the page. What's happening? Is it because somehow I've moved files, and the links to the images are broken? Please help!

Safari > Preferences > Privacy > Cookies and website data:
Click “Remove All Website Data” button.
https://support.apple.com/en-us/HT203370

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's

Can some one help me out here ?

Hello Experts, Am facing the below error in console page.Can someone help out here ? The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's code page (MS Windows Latin 1 (ANSI), superset of Latin1). Failed to connect to repository service [dev_repo].]. Below my environment variables in .bash_profile LANG=en_US.utf8; export LANGLC_ALL=en_US.utf8; export LC_ALLINFA_CODEPAGENAME=UTF-8; export INFA_CODEPAGENAME Thanks,Ahmed.

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

I have tried to install Windows 7 Beta multiple times, but I always get the following error statement while copying temporary files or just as "Setup is starting" is displayed: "Windows Setup experienced an unexpected error. To install Windows, restart t

Restarting the installation results in the same error message. Any ideas on what's wrong? Here are some details:
my computer is lenovo g585.
I am running windows8. It's licence will be closed in one week.
I have windows7 OS genune.
While installing this (with sandisk pendrive ) the unexpected error occurs.
I am using avast antivirus, I have turned off this while installing.
So any help or suggestions would be greatly appreciated!
Thanks in advance!

Is OS already installed on your HDD?
Check this link : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-setup-experienced-an-unexpected-error-to/e28d6f6e-7afc-4ad8-ae99-a92f90cf9083
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

"An error occurred while attempting to retrieve the KPI value from the list"

Hi all.
when I used KPI, this error occured:
An error occurred while attempting to retrieve the KPI value from the list
what happened?
any suggestion.
thanks.

Hello,
Unfortunatly, I don't have the option to re-create my SP list. I have created my KPI list in the same site as the targeted list. I have made all items available in the list view, I've tried several different list views, I still get the
An error occurred while attempting to retrieve the KPI value from the list.
message.
I am at a loss here, I've search the internet high a low and haven't found any helpful info.
In MOSS 2007 I've created a list with about 24 columns. I need a KPI based on one of the columns. I've tried to creat a view with that one column, I've tried to creat a view with all columns
and make it the defualt column... I don't know what else to try here.
Any help would be very appriciated!
Cheers,
~Bryan

An error occurred while attempting to change modules

I installed Lightroom and when starting the program I get, "An error occurred while attempting to change modules." I get this message within the program when clicking on any of the top right menu items. Also, importing a photo is not listed in the file menu. I deleted the preference file and Lightroom folder in my user preference and reinstalled. I tried many reinstalls, it still has reoccurring error message. Anyone now a fix? I'm running 10.5 on a Core Duo with 2meg of RAM on a 320 gig hard drive with lots of room.

For what it is worth, I was unable to change to the Web and Print modules, and I was also unable to record new presets (though I had successfully done it many times before) though I could still use already created ones. I was baffled, but found a workaround using hints from this and other forums. Much thanks to those who provided me with a starting point as I never would have figured this out on my own.
My wife is a separate user on the same computer, and I tried switching our catalogues and preference files, ... nada. Looking at her folder structure under user/library/application support/adobe/lightroom, she had folders for Web Templates, Web Galleries, and Print Templates but I didn't. So, simply copying her folders (not creating new ones of the same name, which may still have worked) into my own lightroom directory worked.
Where I screwed up initially was tryiong to use my own presets under her install of lightroom and then creating new ones (which worked) but then trying to import them back into mine. I had the new presets working under my own install, but still couldn't create new ones under my own setup. Finally, I realized that it was the "Develop Presets" folder under my own install that was in some way corrupted and copied her Develop Presets folder into my own install and every thing was fixed. I could even copy the subfolders from my own Develop Presets folder directly back in without issue.
Hope this helps someone.

Switch Executive with SCXI "an error occurred while attempting to access device"

I get "an error occurred while attempting to access device" when trying to validate or use the test panel for my current configuration:
PXI-1010 (PXI/SCXI combo chassis)
PXI-4060 in the PXI rightmost slot
SCXI-1129 in slot 1 of the SCXI portion
Clean install of all NI software (2012 DS1 developer suite) and a reset of MAX configuration data after not getting this resolved previously.
Because the SCXI-1129 is being controlled by the 4060 (legacy), I can't use DAQmx in NISE 3.5. So I'm stuck with IVI. I've configured everything in IVI so that I can at least add my device (SCXI_1129) into a new NISE virtual device. But when I go to validate or make a connection in the test panel within NISE, I get the above error.
Am I configuring something incorrectly?
Attachments:
max_report.zip ‏93 KB

Frank,
Thanks for continuing to look at this issue. Here are my responses to your questions.
1) You get an error when your driver setup string in in the General tab of your Driver Sessions is "1129/2-Wire Quad 4x16 Matrix"? Are you using a
PXI-4060 in the right-most slot of a combo chassis. If you're using a DAQmx device, it's a whole different ball game. If you're not using a PXI-1010
combo chassis, it's a different story too.
2) I can't seem to find a way to cleanly export my IVI configuration files. Even the VI you wrote (Programmatically Export All Virtual Devices & IVI
Configurations for NI Switch Executive) didn't copy the IviConfigurationStore files. So I manually copied them over and attached them. When I create
my driver session, I type 3 things: the topology ("1129/2-Wire Quad 4x16 Matrix") in the driver setup string, "SCXI-1129" and "SCXI1::1" in the
hardware tab (It would be "SCXI0::1" if the dip switches on the PXI-1010 were set to address 0, which is the default), and niSwitch in the software
tab for the software module.
3) The error I'm getting is the name of the post. "An error occurred while attempting to access device". It get this when validating my NISE virtual
device when simulation is not checked. It's also peachy-keen for me when I simulate.
4) See the screenshot.
5) Production line down is par for the course for this lab due to how many people have messed with this station in an effort to bandage it over the
years to keep product flowing. Long story, but there has one problem after another on this machine for a while with no owner. I'm now responsible for the automated tests on it. I'm adding new devices because I'm essentially starting from scratch so I know what's going on and can trust it. But apparently I'm either getting the same error they had before or it's a new one. I suspect it's the same one but it "used to work". I had another coworking here yesterday and he opened a phone SR, gave the information, and was told they'd get back to him. I haven't heard anything yet.
Attachments:
IVI export.zip ‏34 KB
SCXI-1129 adding to NISE.JPG ‏36 KB

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Trying to update to iTunes 10.4.1 and I get a message "A network error occured while attempting to read from the file C:|Windows|Installer|iTunes.msi" Running WIndows 7 with all updates done. I have never had an issue with iTunes updating before. Anyo

iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

An error occured while attempting to perform the operation.

Hi
I'm getting the following error message in my disco plus report.
"An error occured while attempting to perform this action. The operation did not complete successfully.
Extra Internal info:
(OLException
Cause:OLException {
Code: OLCmRefException::eNullRef
Args: OLCmRefException::eNullRef
I have searched the forum but have found no usefull information for me.
The problem occured when I added a calculation to woorkbook that was working perfectly fine before. Now I can't even remove any item or calculation (or anything) from the worksheet.
I then edited the calculation to just show "1" instead which allowed me to remove that certain calculation, but I can still not remove any item.
Please ask if more details are needed.
What can have caused this problem, and is there a way to solve it? Do I have to redo the entire report?
BR
Robert

Robert,
We encountered this issue with our 10.1.2.54.25 installation on a Solaris OS. We are currently at CP3. We have tried CP4, 5, 6 and 7. No resolution. Oracle has replicated our issue assigned a bug # and say that they have found a fix but it will not be made available until the release of 10.1.2.3 CP2. We have requested a one-off patch for 10.1.2.54.25 CP7. They are currently thinking about it. We have been hung up since Feb. '08 and not be able to resolve any bugs because of this problem.
Jerre

Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

Similar Messages

Maybe you are looking for