Cisco Supervisor Desktop show "Agent Logs - call" and "Agent Logs - state" in N/A ::: UCCX 8.5.1

Hi team.
The Cisco Supervisor Desktop don't show any logs in the "Agent Logs - State" and "Agent Logs - Call" in some agents.
I restarted the Cisco Desktop Services in CCX Serviceability but the issue continue.
I appreciate any help respect this case.
Thanks a lot.
ErnestoG

Hi Ernesto,
Did you click or selct the Specific Agent\Inbound call which is currently being handled by the Agent. From the Screenshot you have attached (first one) doesn't look like the call has been selected.
Please select or click on that Specific Agent\Inbound call from CSD and check these values.
Hope this helps.
Anand
Please rate helpful posts !!

Similar Messages

  • UCCX 8.5.1 - Cisco Supervisor Desktop not showing Caller Names

    Hello,
    I have recently done a deployement for UCCX 8.5.1. I have been made aware of an issue where iif a Cisco Supervisor Desktop is looking at a Agent that is on a call, the Callers name is not bening shown in the Caler Name field, instead the callers extension is being displayed. Has anyone else experienced this or is this one for TAC?
    Here is an example of what I mean.
    This is the view on the UCCX Supervisor screen when an agent is taking a service desk call.  How can we configure it to display the name alongside the number?  I know that 1380 is Paul A Smith, and 1552 is Nicola Turvill? 
    Thanks for your time.

    Check the troubleshooting guide.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/troubleshooting/guide/cad85ccxtg-cm.pdf
    Page 126
    Problem
    Enterprise data does not display data on outbound calls.
    Solution Enterprise data only displays data for inbound calls.

  • ACD Logs Display and Agent Call Display is N/A on CSD

    Hello,
    We are facing the problem that the ACD logs display and Agent call display is N/A on the Cisco Supervisor Desktop. The version of CSD is 8.5.4, overall status of CSD is fine, for reference please see the attached screenshot.Thanks.
    Looking forward for the response.
    BR,
    Durraze 

    Hi Karthi,
    On PGA run the postinstall.exe setup turn off/on the Rascal Replication setup, in services.msc cycle the services shared below:
    Cisco Chat Service 
    Cisco Enterprise Service 
    Cisco LDAP monitor service
    Cisco License and Resource management
    Cisco Recording and Playback
    Cisco Recording and Statistics Service
    Cisco Sync Service
    Cisco VOIP monitor
    Please rate if it helps.
    BR,
    Durraze Khan

  • Agents don't appear in Cisco Supervisor Desktop (CCX 7.01 SR5)

    Hi all,
    I have a problem with CSD and CAD applications. My problem is although we have an agent logged into the CAD, I cannot see it from th Cisco Supervisor Desktop. I have reviewed the connectivity between Cisco Agent Desktop machine and CCX Server and from Cisco Supervisor Desktop and CCX Server (performing telnets between machines).
    With this issue I cannot monitor agent states neither perform agent monitorization.
    I have installed Cisco Security Agent 5.02 on both CCX Servers.
    It's important for me to solve it, so any help will be appeciated.
    Regards

    This has been identified as a known issue documented under Cisco Bug ID: CSCtd75811.  This problem is the same as that documented in CSCtd07195 for CAD Enterprise.  http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd75811 (Registration required).
    There is no known work-around and the fix is "Release Pending" and has been so for about a month.
    Tim

  • Re: Why are there numbers not showing up on my verizon online call and texts log?

    I am having the same problem with texts not appearing on my online text log and have also noticed a huge increase in data since my two sons have had their iPhone 5s.  I have the iPhone 4.  Two problems here
    iPhone users DO appear.  In the posted questions and response below, you indicate that if we are all using iPhones then we are not using the Verizon network but using data.  HOW DO I STOP THIS DATA USAGE AND RETURN TO USING THE NETWORK?  I can't afford the data charges that I am getting.. HELP!!  and Thank you.
    1.   Re: Why are there numbers not showing up on my verizon online call and texts log?     
              SuzyQ     May 11, 2013 8:03 AM    (in response to aheath17)    
    If you are all using iPhones, then it's likely the texts are going through iMessages and therefore use data.  Since the texts are not using the Verizon network, but the app, they do not show up in the logs.  The app is not specifically blocking the texted numbers from showing up, but the information comes through Verizon as data usage, not numbers texted.   

        Sparkyjames81,
    Lets figure out just where those texts are going! There are many apps that can be downloaded from the Play Store for Android phones that will allow messages to be sent over the internet, and therefore they are not actually text messages and will not show up in our records. Even Facebook has their own messaging app available that does this.
    If you have an iPhone, they come with a service called iMessage that allows for messages to other Apple devices be sent via the internet, and this will also not show up on our records. These are all ways to bypass our actual texting services, and since these messages are not being sent as texts they do not show up on our records.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • Why are there numbers not showing up on my verizon online call and texts log?

    << Discussion  moved from All Things Community to Apple for better exposure >>
    Why are there numbers not showing up on my call and texts log when i look this up online at verizon? There is one number that my daughter texts and calls a lot i found from her phone log but not one time does it show when i look this up on the Verizon wireless call log???  We all have iphones is there an application or something that can block certain calls from showing up? It clearly has texts on her phone from this number why would it not be on the call log?

    Thank you for your reply.
    However, wouldn't an iMessage show up different than a text? It looks just like every other text on her phone.  We all have iphones in this house and they always show up as texts on  the call log but this one number seems to be blocked somehow from showing up on the text log. And there are texts from weeks ago and it's from an actual number not computer or any weird/odd code and yet it never comes across on the text log when i look it up. 
    If you are correct and it's coming across as iMessage is there a way for me to block texts coming across this way so they all show up on the text log?

  • How to reset numbers in real time display in Cisco Supervisor Desktop?

    Hi all,
    I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
    Thank you.

    Joe,
    I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
    Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
    I guess I will have to try for myself.
    Regards,
    Geoff

  • User is in team state but not in team summary - Cisco supervisor desktop

    We have Cisco supervisor desktop where supervisor can see user in team state but not in team summary?? Any clue why is could be happening??
    Any help is much appreciated
    Thanks!

    Hi David,
    Not sure of setting an alert but Supervisor can use "Table 17. Summary display data"
    Agents Not Ready : The number of agents in this CSQ who are currently in the Not Ready state.
    And "Table 12. Team Summary display data (cont’d)"
    Max Not Ready : The longest time the agent spent in the Not Ready state today.
    And also refer the section "Creating Supervisor Work Flows"
    Using the Supervisor Work Flow Administrator feature, you can configure your desktop to perform certain actions based on queue statistics for calls waiting and calls in queue for specified skill groups.
    Refer the below link for more information on this.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/csd85ccxug-cm.pdf
    Hope it helps.
    Anand
    Pls rate helpful posts !!

  • Voice Monitoring Using Cisco Supervisore Desktop issue.

    Hello all.
    I have a probelm, I prepare for a demo and my demo contain that CUCM7.0+UCCX7.0 with premium license+ Cat2960+ 7911+7940
    When I try to perform a call monitoring from the CSD the message appeare to me and say" The Cisco Supervisore Desktop dont recieve any voice ".
    theis appeare either with SPAN configuration or without it.
    what could the problem be?

    Hello Ahmed,
    One question, what kind of monitoring are you traying to configure, desktop base or SPAN bwese??
    These documents will help you with both configurations:
    Desktop Base
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008075025a.shtml
    SPAN base
    http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00801a62a8.shtml
    HTH
    Please rate this post if was helpful
    Walter Solano
    CCVP, Cisco UCCX Specialist
    Cisco IP Communications Express Specialist

  • Cisco supervisor Desktop support for Windows 7

    We are getting ready to rollout Windows 7. We ran into a problem while testing Historical Reports and Cisco supervisor Desktop on Windows 7. Historical Reports installs just fine while CSD give us an error that the operating system is not supported by Cisco. Is there a current version that supports Windows 7?
    Our IPCC version is:
    Cisco Application Administration - 7.0(1)SR05_Build504
    Package: Cisco Unified CCX Enhanced
    Any help with this issue would be greatly appreciated.
    Thanks,
    Yefim

    Yes, you are wandering down a long and lonely road.
    Repackaging an install package from an .exe (which could be one of a million types of installer, such as InstallShield) to an MSI isn't a trivial task - it's a fairly specialist piece of work.
    You can only open MSIs with Orca, it doesn't support other types of install package.
    I would suggest if you have a workable solution with ThinApp you'd be best to leave it there...
    Aaron

  • Work flow action missing in Cisco Supervisor Desktop (for UCCX)

    Hello,
    In Cisco Supervisor Desktop User Guide and in the console help file, I read it is possible to configure, in the Supervisor Work Flows, some triggers and some actions to play if triggers are reached. This actions are :
    Audible Alert Action
    Message Box Action
    Report Action
    Tree Control Action
    Email Alert Action
    But in fact, in my own supervisor desktop, the only action is Tree Control Action.
    How is it possible to have the other actions available ? is it a licence problem (We are running on a Enhanced version).
    thanks in advance for your help.
    Philippe

    Thanks you for your answer.
    Philippe

  • Pros and cons between the large log buffer and small log buffer?

    pros and cons between the large log buffer and small log buffer?
    Many people suggest that small log buffer (1-3MB) is better because we can avoid the waiting events from users. But I think that we can also have advantage with the bigger on...it's because we can reduce the redo log file I/O...
    What is the optimal size of the log buffer? should I consider OLTP vs DSS as well?

    Hi,
    It's interesting to note that some very large shops find that a > 10m log buffer provides better throughput. Also, check-out this new world-record benchmark, with a 60m log_buffer. The TPC notes that they chose it based on the cpu_count:
    log_buffer = 67108864 # 1048576x cpuhttp://www.dba-oracle.com/t_tpc_ibm_oracle_benchmark_terabyte.htm

  • High redo, log.xml and alert log generation with streams

    Hi,
    We have a setup where streams and messaging gateway is implemented on Oracle 11.1.0.7 to replicated the changes.
    Until recently there was no issue with the setup but for last few days there is an excessive amount of redo and log.xml and alert log generation, which takes up about 50gb for archive log and 20 gb for the rest of the files.
    For now we have disabled the streams.
    Please suggest the possible reasons for this issue.
    Regards,
    Ankit

    Obviously, as no one here has access to the two files with error messages, log.xml and alert log, the resolution starts with looking into those files
    and you should have posted this question only after doing this.
    Now no help is possible.
    Sybrand Bakker
    Senior Oracle DBA

  • I have just installed a new yahoo messenger acc on my iphone, and cannot log in, getting...user underage message.. how do i log in and stay logged in on my iphone5

    i closed and installed a new yahoo messenger acc on my iphone5 last night, and are unable to log onto it now, i get a ....user ungerage.. please try again message continuously, how do i get logged in and stay logged in on my iphone thanks

    You might receive more assistance from users in the Lion forum.
    Click here  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
    Then click New / Discussion / Lion

  • Cisco Supervisor Desktop - Barge and Interrupt features greyed out.

    I have a customer using Cisco Supervisor Agent and Cisco Agent Desktop. In the Supervisor Desktop, the Barge and Interrupt features are grayed out for active agent calls.
    This just started about a week ago.
    We are currently working with Cisco on an issue with Tomcat Service, but restarting it last Friday did not fix this issue.
    Any ideas?
    Thanks in Advance!

    Hi Jonathan ,
    To barge in on a call, supervisor must first be logged into Cisco Agent
    Desktop. Login on CAD and CSD by yourself and then try to barge. You can barge in only
    once on a call per supervisor.
    For example, if you barge in on a call, drop out of the conversation, and
    then attempt to barge in on the same call again, you will not be able to do
    so.
    You cannot barge in if any of the following conditions are true:
    The agent is on hold.
    The agent is on two calls.
    The agent is in a conference call.
    You are already on another call.
    In CUCM under Agent's phone, Built In Bridge must be ON and Privacy must be OFF.
    If Supervisor needs to barge in, he should be logged in to CAD and CSD both
    and it will consume 1 Agent License, if you are logged in CAD and CSD with
    same user ID.
    I hope this will help
    Regards
    Ravi

Maybe you are looking for