Cisco Support contract part number is needed !

my company just ordered fornew LMS release and exactly needed the support to open TAC's .
I searched but couldn't find the part number for this, some one send me this part number CON-PSUS-LMS410K9,
I searched but I could not find anything usefull, it would be very appreciated if someone help me to work it out.
thank you

Hi Ali,
I guess more than the part number if you enter the Serial number or contract covering your Ciscoworks can work for you.
Contract is a must to open a TAC case. Moreover for further enquiry you can mail [email protected] who can assist you open a case with available details or you can call CIN @ 800-553-2447.
-Thanks
Vinod

Similar Messages

  • Cisco support contract

    Dear sir,
    I need to update my IPS Signature on ASA5510-AIP-SSM automatically, From my local Cisco representative i got 2 product numbers
    to obtain the IP address of FTP server , username and password (Cisco support contract)
    In this case which one should i use among:
    1) CON-SU1-ASAINC10
    2) CON-SU1-AS1A10K9
    Thanx in advance

    CON-SU1-ASAINC10 : This is the SMARTNET contract service agreement.CON-SU1-AS1A10K9 : This is the Cisco Software license agreement.
    This is interesting.
    1.      What is the difference between SMARNET & Cisco Software license agreements?
    2.      What is the meaning of the following code?
         a.     CON
         b.     SU1
         c.      ASAINC10
         d.    AS1A10K9

  • Cisco 2811 Fan Part Number

    Does anyone know whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).

    FAN 1 and 2 is usually a Sunon KDE1204PKVX or a NMB 1608KL-04W, these are the stats:
    Size: 40x40x20 mm
    Rated Voltage: 12V
    Input Current: 0.12A
    Input Power: 1.4W
    Speed: 8200 RPM
    Max Air Flow: 10.8 CFM
    Max Air Pressure: 6.9 mmH2O
    FAN 3 is either a DELTA FFB0412VHN, a NMB 1611KL-04W or a Sunon PMD120PQB1-A, these are the stats:
    Size: 40x40x28 mm
    Rated Voltage: 12V
    Operation Voltage: 4.5V - 13.2V
    Input Current: 0.16A (0.24A MAX)
    Input Power: 1.92W (2.88W MAX)
    Speed: 9500 RPM
    Max Air Flow: 15.79 CFM
    Max Air Pressure: 12.94 mmH2O
    You can use any FAN that have the same specs, but be aware Cisco changed the pin configuration so you need to adjust it accordingly. I got a few stock Sunon MagLev GM1204PQV1-8A and they are perfect match for FAN 3, you just need to swap the Black and Red cable on the connector and they have been working flawlessly on my Cisco 2811 routers.
    Using any 40x40mm FAN that fits will cause throuble if either Air Flow or the Speed are slower than the specs or if the
    pin configuration does not match the Cisco OEM part.

  • I need to replace the keyboard on my G62-340US laptop. anyone know the HP part number i need?

    i spilled coffee onto the keyboard of my HP G62-340US laptop a couple of months ago. i flipped it over quickly and dried it with a hair dryer, but the keys no longer work. the computer is working, currently with a USB keyboard, but that limits my portability quite severely. can someone please direct me to HP's parts lookup so that i can order a replacement keyboard? thanks
    This question was solved.
    View Solution.

    Hi:
     Below is the link to the service manual for your notebook:
    http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf
    Keyboards with their corresponding part numbers can be found in Chapter 3, page 18.
    Paul

  • Satellite Pro A10 - need a part number for compatible power adapter

    My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0GHZ 256MB 30 GB DVD/CD-RW 14tft monitor.
    His power supply is no longer working , can anyone tell me the power adapter part number as i am looking for a new one for him.
    I need a part number to go on, and any other compatable power adapters numbers.
    Appreciate any help given.
    Thanks
    jane

    Hi Jane,
    I believe the part number you need is PA3283E-2ACA
    Check it out on the following link :-
    http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&pro duct_uid=64945&_LOC=UK

  • IVR Windows 2003 part number

    Does anybody know the part number for Cisco Unified Communications Operating System to support IP-IVR 7?
    This is an OEM Windows 2003 build for an HP DL380 G6 server, so needs to be version 1.5 of the operating system release. I'm struggling to find the exact part number that I should order to get a bootable 1.5 OS ready for an IP-IVR (UCCX) build
    Thanks
    Jed

    The Cisco OS 2003 part number is 2003.1.2 or 2003.1.1; however, what version of CRS are you looking for? Please remember that software should be requested through PUT; go ahead and enter your Software contract under PUT, it should be listed there:
    PUT tool (http://tools.cisco.com/gct/Upgrade/jsp/index.jsp)
    Hope it helps!!!

  • AS5400 HPX feature license upgrade part number

    Dear Support,
    I've been search round the cisco site without sucess!
    I've been asked to ensure all devices support SSH access for our new security policy. We currently have many AS5400 HPX running with the 12.3T IP Plus license, and believe I need to upgrade these to the 12.4T IP PLUS IPSEC 3DES image (feature navigator shows ssh server is in this feature set).
    Could someone advise me the part number I need for the upgrade.
    Your assistance is appreciated.
    I always rate helpful posts.
    Regards, Adrian.
    PS I am aware these are EoS, and we should be eventually going to the XM platform.

    The things is that part codes are complicated to find for users, especially when products are already EoS, as one has to track the original order to match an upgrade code from the original list price.
    Because of this I suggest you contact the cisco office for them to find the exact codes. In certain cases they can then waive the requirements in writing to satisfy all licensing requirements.

  • HP pavilion Dv6 Fan Problem - Want to know replacement part number

    Hi,
    I purchased HP Pavilion dv6t QE in Dec 2011. Just after the warranty expired in Dec 2012 its fan stopped working. Whenever I am starting laptop I am getting error that laptop fan is not working correctly. I am ready to get the fan/heat sink changed but I am not able to find the replacement part on HP website. Please let me know the HP Fan & Heat Sink replacement number for below model:
    Serial : 2CE14903X3
    Product: QJ912AV
    Model - dv6t-6b00
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c03015537.pdf
    The available fan/heatsink combos with HP part numbers can be found in chapter 3, on page 27.
    In order to get the right one you need to know what hardware is installed in your PC.
    Since it is a CTO (configured to order), there are no product specs available.
    So it is incumbent upon you to know for example if your notebook has an Intel processor and a graphics
    subsystem with 2048-MB discrete memory.
    Once you determine the right part number you need, you can order it online at the link below.
    http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=2DE434CEF5B743168A44405770DB2EA5
    If you want a second opinion on if you are choosing the right part, I will be happy to help once you describe the specs for your PC.

  • W700 LCD bezel screw caps part number?

    Hi everyone,
    I've had the LCD screen replaced in my W700 recently. One of the plastic square screw caps that mask the bezel screws is peeling off however (it seems they don't like being re-used). 
    I've looked in the Hardware Maintenance Index PDF but can't seem to find the part number to re-order the screw caps so I can just stick a new one on (I presume it's a CRU part given how easy it is to install by the user).
    Can anyone here (Lenovo staff or otherwise) tell me what part number I need? As far as I can tell the W700 screw packs don't contain these screw caps. Maybe it's part of the LCD screen bezel? 
    I just want to get someone at Lenovo to pop some in an envelope for me, first thing's first though is the part number.
    Many thanks all,

    If you need the square caps for the LCD bezel you can order the screw kit 60Y5510. It's normally for T510/W510 but the caps are the same. The only difference is the number. TheW700 has 6 screws, T510/W510 just 3. But the kit might have enough caps.
    Hope this helps.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Powerbook G4 17" keyboard part number

    Hi there, I've got a Powerbook G4 17" that needs a new backlit keyboard. Mine works, but the light is very faint (and I've tried every keyboard adjustment out there) and I know it could be better. I was wondering if there's any difference between the 15" and 17" keyboards, so I want to make sure I'm buying the correct item.
    My model number is: M9110LL/A and it's a 1.33 gHz 17" Powerbook G4.
    I'm assuming the lights are in the actual keyboard itself and not the mother/logic board, correct?
    Thanks for your input!
    -Matt
    P.S.- If this isn't the part I need, could you let me know which part number I need to be looking for?

    Apple's part number for the keyboard is 922-5776.
    It's available here, among other places.

  • Need CiscoWorks Part number assistance

    I have an education client/school district that would like to renew/upgrade their CiscoWorks licenses to the most current version. The below are the CiscoWorks products that they have:
    CiscoWorks Health and Utilization Monitor
    CiscoWorks LAN Management Solution 3.1
    CiscoWorks QoS Policy Manager 4.0
    CiscoWorks Voice Manager 3.1
    CiscoWorks VPN/ Security Management Solution 2.3
    The customer has 800 devices in their network that need to be managed. What I need are the quantities and Cisco part numbers for this CiscoWorks renewal/upgrade to the most current version. I have found no one in the Midwest region with Cisco that can assist. Any help would be appreciated!

    HUM and LMS are already at the latest versions as is CVM. Since they already have QPM 4.0, they can go to http://www.cisco.com/upgrade/ and enter their QPM SAS contract number. From there, they can order the QPM 4.1 upgrade.
    VMS has been migrated to Cisco Security Manager which is currently at version 3.2. There are a few part numbers there:
    CSMST25-3.2-K9 : CS Mgr 3.2 Enterprise Standard - 25 Device Limit Media Kit
    CSMST5-3.2-K9 : CS Mgr 3.2 Enterprise Standard - 5 Device Limit Media Kit
    CSMPR50-3.2-K9 : CS Mgr 3.2 Enterprise Pro - 50 Device Base Lic Media Kit
    Someone from your sales team (i.e. your SE) should know how to contact a network management resource within Cisco to verify exactly what you need.

  • Support Contract wref to sales order-how to get serial number

    Hi Experts,
    Below is the scenario
    Step 1:I sell product[supplied by thirdparty] in sales order  123456
    Material number     Description      Qty
    material-0001         Printer             2
    Step 2:While purchase it from 3rd party it will be having serial number which can be entered manually while doing goods receipt. Eg:
    Material number        Description    Qty      Serial number
    Material-001              Printer           1         PS-10001  
    Material-001              Printer           1         PS-10002
    Step 3: Now I create a support contract with reference to the sales order 123456 for the sold printers.Here I need to capture the serial numbers of both printers, so that when customer complaints, the item can be identified.
    How can we achieve this in the contract?
    Waiting for a quick reply
    Thanks
    Banu

    Hi Banu,
    1. Create a Contract with Service product.
    a. Create a Service material in MM01, with material type DIEN
    b. Create a General Task list master (Tcode - IA05).
    c. Attach this Task list with the Service material using OISD Tcode (set the reference object Equipment - if your equipment and serial number are same) -->(Service Product)
    2.Attach the Technical objects (Equipment Number or Material number + Serial Number) to the line item service product.Maintain the contract data like price, start and end date.
    3. Create a Sales order VA01, with reference to the Contract document
    a. Configure this sales document type, material type to determine the Item category TAD
    b. Let this Item category has the Requirement type SERA (maintain Service order type in requirement class(230 as default)
    4. System will ask you the equipment number to create a Service order.
    5. Enter the Equipment number,
      System will ask you to select the Operations from the task list that has been attached with the Service product in step 1.c
    6. Save the sales order and open in Change mode.
    7. In Scheduled lines tab, you can find a "Service order button". Click on the button, will show the service order for the given Equipment number in display mode.
    You can edit the Service order IW32, and confirm the operations and issue materials to capture the actual cost and settle to the Sales order.
    Hope this would help.
    Regards,
    Babu.K

  • Satellite P300 - I need the part number of the original screen

    Please can anyone help?
    I need to get Toshiba part number for the original screen in my Satellite P300-20H. My laptop fell of the bed and the only way I can use it is with an external display
    all else is fine with the laptop but it would be a great help if I could get the part number for the original 17" WXGA+ TruBrite.
    Please feel free to email any help you have: Email:[[email protected]]
    much thanks
    Welsh_Jam

    Hello
    I think nobody here can anwer your question: Its only a user to user forum and you will not find any notebook technicians here they can tell you the part number of the screen.
    If you want to know it you should contact an ASP. They can order all original Toshiba parts:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
    Greets

  • Need help finding the Motherboard parts number on Ideacentre B520

    Hi guys,
    I'm currently repairing an ideacentre B520 for a customer and need to have the MB parts # to have the parts ordered. 
    i've found a white sticker with somes number on it but I don't know which one is the MB parts number.
    Here the number:
    27*939530*126
    1a*2
    4*mfg: 1*2 (in bold)
    PL*00:u0* (in bold)
    46*9ae9*l01
    and the last one on another sticker.
    MB            11s1*013462z*0mP17*043  A*<
    (I've put somes * instead of caracters on purspose.
    Thanks

    Hi,
    The Motherboard part number starts with 11......
    If you download the Hardware Maintenance Manual from the Lenovo Support site, all the part numbers are there, as well as removal instructions.
    Good luck!
    CB2011

  • T430u need the part number for the Sata cable

    I have a t430u where the Sata cable is broken, i need the part number, I have searched around, called lenovo support (they said it was under warrenty, the say it was a bad hard drive and want $600 to replace a board) I know it is the Sata cable that clearly has 2 broken wires.  how do i know, if i hold the two loose wires to the posts, the machine boots and runs, but it is way too small to solder. any help would be appreciated. 
    t430u, and it is the mini-sata on one end an a right angled non-sata end.  I don't have a picture until i get the laptop returned from IBM.
    Solved!
    Go to Solution.

    I believe 04W4436 is correct. In the U.S. IBM does the parts distribution.
    http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/TopCategoriesDisplay?cntrfnbr...

Maybe you are looking for

  • Leaving date not filled in query

    Hello, we have created an infoset with database PNP and use the field SYHR_A_P0000_AF_FIREDATE (append structure of IT 0000) in a query. Unfortunatly this field is emtpy when executing the query but as far as I understood from documentation this shou

  • Wav format not recognized

    I have a Creative Zen that I use for recording my stand-up gigs. I used to use my phone which records in MP3 format from which I imported into Cubase and cleaned up the sound and tightened the envelope. The wav created by Zen is not recognized by Cub

  • Html in java

    how can i return the string "HELLO" with the specified kolor (instead of red)? public String toString(Color kolor)    return "<html><font color=red>HELLO</font></html>"; // how to use kolor ??? }thanks.

  • Vector to JSP Page

    Hello, I have a certain Vector within my servlet class that i retrieve from my logic unit tier. I wish to pass this Vector to the JSP page to view and use the following statements to do this :- Vector aucItems = logic.getAuc() ; request.setAttribute(

  • I can't open any apps after downloading music of mac

    I just downloaded 3000 songs of my mac on to my iPad 3 and now I can't open any downloaded apps ! Any one know why ?