Cisco SX10 stand alone possible?

Hi,
I want to place a Cisco SX10 at outside remote site, that have the Internet connection only. And I want to take a FW NAT to the SX10, which assigned a private IP with public IP NAT on FW.
1. Can I set the DND or right list to call on SX10? That can prevent from hitting by annoying fake/scan calls by SIP? Is it only SIP concern the fake/scan call? H323 will not have?
2. I cannot set the NAT on SIP? When I make the NAT on FW, the call in to SX10 is fine, but it would drop the call during 30 sec.
SIP video device must reg. to a Video server?

This has been asked many times over, if you do a search of the forums for either "sx10 standalone" or "sx20 standalone" you'll get many results with how to do this.
You can mitigate the SIP scanners by trusting SIP listen port off, however you'll then not be able to take any calls as that solution is used in conjunction with a call control server, such as VCS. Only other way is to block all incoming traffic except those you allow.
SIP doesn't use NAT, only H323. Make sure your firewall isn't doing packet inspection.
To best take advantage of the device and it's features, yes, it should he registers to a call control sever. Also, it's more secure, because then you can block all the unwanted calls at that one entry point.

Similar Messages

T's possible to use the jsp to develop stand-alone application?????

Hello everybody, I would like to know your considerations about this topics: It's possible to use jsp to develop stand-alone application that will be not run on the server but on the local machine?There are some negative aspects on make this? Thank you for your reply

i don't think you could ever protect the jsp code and it wouldn't do you much good to bother anyway, since anyone with a browser can just "View Source" and see all the HTML on the page anyway.
the only thing you would want to protect is your java source. you don't have to distribute the .java files with your application, just the .class's. you could try and obfuscate the .class files, but a determined person will always be able to reverse it back to a .java program and read it. it would take a bit of work and knowhow though, so figure out how smart the consumer is going to be and if they will be able to figure out how to reverse .class files back to .java

Is it possible to have a user interface in a stand alone application without having LV

Hi!
I want to know if it's possible to build a stand-alone application in order to avoid purchasing LV and at the same time having a user interface to display data?
I really want to know what are the advantages of the stand-alone applications and what are their limits of use?
Thank u

If you have the application builder (included in LabVIEW professional and above) you can make a LabVIEW application that can be distributed and run on machines that don't have LabVIEW installed. If you only have LabVIEW full, you can purchase it seperately.
The target machine requires the LabVIEW runtime, which is freely downloadable from NI, or can be included with the installer of your application.
Please have a look at the datasheet: http://www.ni.com/pdf/products/us/4msw55.pdf
If still have more specific questions not mentioned in the above link, please ask.
Message Edited by altenbach on 10-01-2007 01:01 AM
LabVIEW Champion . Do more with less code and in less time .

Is it possible to place forward/back nav buttons in a timeline based gallery. Stand alone SWF needed.

I'm currently working on a gallery to be output as a stand-alone SWF file, and am doing it all on the timeline as I can't write actionscript for toffee
So far, I have the gallery created with alpha tweens fading between embedded images. These images are buttons, to which I have added URL links (my only foray into actionscript), which will send the user to a specific link related to the image being shown at the time. At the moment this is just a linear timeline that flows from start to finish and loops to the start again - as per most other simple timeline based animations.
I have now been asked if I can add two nav buttons (one each side of the frame) to allow the user to flip back and forth through the images. Is this possible on a timeline? And if so, how would it best be implimented? I just don't know if a button action can affect the flow of a timeline.
Ideally the gallery will auto flow, until either of the forward/back nav buttons are clicked.
Any help here would be really really appreciated.
Paul

Thanks for that Ned. I've had a quick look, and will research deeper later. Though being a complete and utter novice at actionscript, I am flummoxed by probably the simplest of stuff by your standards. For example, the scripts I saw briefly, using the searches you suggested appeared to not export a stand alone SWF file - with no XML files or image folders (I'm still to work out if is possible to do that for this particular use). Also, on all of the examples I saw, the buttons are embedded at the bottom of the pane, and I really need to put the buttons as plainly obvious clickable blobs on either side of the image area. This, again, I can easily do on a timeline (apart from actually making them work of course) but to do this with someone else's AS code, will need more time than I have to learn the relevent stuff.
Does it sound like I may have to just settle for a linear, non-interactive rotating gallery? - based on my knowledge limitations, as well as needing a stand alone SWF.
Paul.

Cisco 1602 Aironet Stand alone Accepoint

Dears all.
I have 15 Cisco 1602 Aironet Stand alone Accepoint. I would like to configure this all to work with one SSID with out registering in any wireless lan controller. I would like to get your advice that, what configuration I have to do ?

HI Yakub,
Here is the template:
Autonomous AP and Bridge Basic Configuration Template
https://supportforums.cisco.com/docs/DOC-16087
Here is a link to the 1600. Click on config guide .. If you never configured an autonomous ap follow the guide carefully
http://www.cisco.com/en/US/products/ps12555/tsd_products_support_series_home.html
Hope it helps.
Regards

Can Cisco 1041N WAP Be Configured as a Stand-alone device

I'm out at a remote site and we've been futzing with configuring this to be the site's WAP. But it's looking like it's
meant to only be used in conjunction with a central controller. Is there any way to have it work like a stand-alone
device like the good old 1200 (which I am missing very much at the moment).

According to the Cisco Software Download Centre, you can load autonomous IOS into the 1040 AP.
Products
Wireless
Access Point
Cisco Aironet 1040 Series
Cisco Aironet 1040 Series Access Point
IOS Software
Follow the proceedure below to convert the AP from CAPWAP to Autonomous IOS.
Using a TFTP Server to Return to a Previous Release

Cisco Aironet 3602I is stand alone or need a controller ????..

Hello,
Can any help me with this questions ?...thanks you.
Cisco Aironet 3602I is stand alone or need a controller ????..
David Chavarria

in General APs can be converted to work with autonomous (standalone) image or an LWAPP/CAPWAP image that needs controller.
for 3600 series APs however there are no support for autonomous image and you can only use it on WLC with version 7.2 or above (7.0 does not work).
7.2 version does not work on all WLC platforms and only works on new platforms like WiSM2 and 2500 WLCs.
I think everyone above mentioned what I wrote but I just tries ot make a good summary.
HTH
Amjad

Migrating stand alone programs to web based application

Hi,
I have a small application consisting of .class files. I created these using Swing components and it's based on Client/ server model where it accesses Oracle Database.
I want to deploy these programs in Java App Server so that it can be accessed thru web browser.
Please tell me how to do it.
Thanks in advance.
Rajeev.
Message was edited by:
Rajeev.Asthana

If this was the thing, Sun, Microsoft and IBM
wouldn't have even giving a thought of migrating
legacy application (I'm talking about Mainframes and
AS/400 here). If this kind of migration is possible,
can't we migrate a java code from stand-alone
"version" to web enabled.
Migration is not really a term to use to for converting a stand alone application to a web application. Unless of course again you are prepared to turn it into an applet.
The flow and control of a web application are entirely different from a stand alone app. You will not be able to reuse Swing GUI's from a web server. I don't know how to make that any clearer.
Hopefully you have a good design for your existing application and you can relatively easily reuse your existing business logic components.

SAP PI Installation on Stand alone machine

Hi,
Thanks to one and all for having such a nice forum as it has answer to all the questions which I have posted.
I have been given a very interesting work for anlying if SAP PI could be installed on a standalone machine without having any SAP box. My requirement is to install SAP PI tool for non SAP integration.
I will distribute my question in 2 parts
1. Can I install SAP PI in a stand alone desktop?
2. Is is important to have a SAP R/3 system to install SAP PI tool?
Please do share your thoughts and if possible please share the document which could be used as proof.
Thanks in advance.
Gautam

1. Can I install SAP PI in a stand alone desktop?
Yes.
2. Is is important to have a SAP R/3 system to install SAP PI tool?
No.
If you are trying to install 7.1 then have a look at the video blog (easily available on SDN) for the same....will help you.
Regards,
Abhishek.

Using a Mac Mini Server as a traditional stand alone desktop

Hello all, currently I have a late 2008 model 17" MacBook pro, Time Capsule, Apple TV and an Iphone 3GS and Ipod Traditional. I would like to add a desktop system to coordinate all of these items, to be the centerpiece is you will, in my home. I'm interested in buying a mac mini, I began to do research however and saw the Mac Mini Server which has greater memory capacity 4GB vs 2GB RAM, and dual 500Gb vs the standard Mac Mini which has one at 320GB. I would like to take advantage of these upgrades as I'm a writer and will be constantly on the web for work as well as likely keep a lot of items on the hard drive.
However I noticed the Mac Mini server utilizes Mac OSX snow leopard SERVER as opposed to the user grade Mac OSX. *My question is if the Mac Mini Server with MAC OSX server can still be used as a stand alone desktop, connecting it to a spare LCD television I have and a mac wireless keyboard/mouse?*
I'm aware that unlike the other mac mini and imacs it does not come with ilife and other pre-installed software, and *I want to know if it's still possible to purchase after market and install said software utilizing them in the traditional manor?*
Thank you in advance for any feedback you can provide and I apologize if my question was difficult to comprehend due to my lack of computer knowledge. I also apologize if this question is similar to others you've received lately as I did a quick scan of google and these forums and did not seem to find the specific answer I was looking for.

Welcome to the Apple Discussions!
Let me clear up a misperception that you have. Both the Mac mini and the Mac mini Server have a capacity to address 8 GB of RAM. There are two SO-DIMM slots in each model. The mac mini comes preconfigured by Apple with 2 GB of RAM (2 x 1 GB). The mini Server comes preconfigured with 4 GB of RAM (2 x 2 GB). You can buy and install yourself up to 8 GB of RAM (2 x 4 GB).
You can even install Mac OS X Snow Leopard client, which will meet your needs a bit better than Server, now that folks have figured out how to do it;
http://discussions.apple.com/thread.jspa?threadID=2539663&tstart=0
And yes you can buy and install iLife, and pretty much everything else that you want to include in your kit. Either model of mini works fine with wireless keyboards and mouses. If your LCD TV has an HDMI port, then a simple HDMI to HDMI cable would be the simplest manner to connect it to the mini.
Dah•veed

BW report without stand alone BW server

Hi Experts,
My query is about basic understanding of the System Landscape for using BW reports. Basically, There is a requirement to use BW reports on stand-alone SRM 5.5 server. Installation guide of SRM suggests that we can install BI 7.0 "content" along with SRM 5.5 server.
The question- Is it possible use BW reports just by installing BI content on SRM server?
Further I would really like to know, if the answer of above question is YES, then what are the prerequisites for it and if 'NO' then what is the BI content's role in SRM server?
Thanks in advance
Regards,
Amit

Hi Amit,
According to my knowledge, you can build up all in one server. But the most important thing is about client. the BW client have to be different from the others.
And their are 2 main application component that related to BW. there are SAP_BW and BI_CONT. this 2 Application component have to be build on the netweaver infrastructure.
Regards,
Assign Point if you see its helpful,
Chuong Hoang

I have a BT home Hub 3 with standard BT broadband(no infinity), how do I set up an Apple AirPort Extreme without a stand alone modem? Can I use my current Home Hub

I want to use an Apple AirPort Extreme as my home router but at present I have standard BT broadband using the BT Home hub 3. Can I connect them in some way so I don't need to buy a stand alone modem.
IS THIS POSSIBLE???
1. Would Apple AirPort Express be better and easier?
2. What modem would be suitable if I can't do it any other way?
I AM CURRENTLY USING MY INTERNET WITH PS3,WINDOWS 7 LAPTOP, IPAD AND IPHONE!!!
Any help would be greatly appreciated.
Thanks
John smith

You said that you wanted the layout to look like this:
AT&T 2WIRE Router (wireless off) ---> AirPort Extreme ---> NetGear 16-Port Gigabit Desktop Switch ---> ethernet cabling to ports in most rooms --->
So, we took that at face value....,.but it could look like this if things are more convenient this way, if you prefer:
AT&T 2WIRE > Ethernet Switch > AirPort Extreme and other devices.
- If we include an AirPort Extreme in the overall network setup, are there any potential issues with the 2WIRE router and the AirPort Extreme router "competing" with one another?
No, if you leave the wireless function off on the 2WIRE. If you do want the utilize the wireless on the 2WIRE and the AirPort Extreme, then you want to keep them physically separated by 6-8 feet, or a few meters.
- Do I really need an AirPort Extreme in the final setup?
No, if the AirPort Express will provide enough range for the network.
Or if I just want an extra WAP, can I operate two AirPort Express units (with the same SSID) downstream of a 2WIRE router?
Yes, if both of them are configured to operate in Bridge Mode. If you are using the "wizard" setup utility in AirPort Utility 6.x, the wizard will do this for you automatically.
That is to say, could we have a setup that looks just like the image above, but with an extra AirPort Express tacked on to one of the unused ethernet ports?
You can have as many AirPort Express devices (or AirPort Extreme devices) as you want, as long as each has an Ethernet connection back to the switch.

Purchase Order in Stand Alone Scenario

Hi experts
i'd like to know if is possible to create a Purchase Order in SRM 5.0 (stand alone scenario) with position "Limit".
I'd like also to know if is possible to create Purchase Orders with 2 or more lines.
I'm sure that is possible to creat Shopping Cart with position "Limit".
Regards
Andrea

Hi Olga,
Are you creating RFQ from scratch or from Sourcing Cockpit ?
If from SOCO, the Bid data can be completed with originating SC data. Otherwise data needs to be completed.
Have a look at "processing bids" part of bidding engine help:
http://help.sap.com/saphelp_srm50/helpdata/en/d3/133dcd5641b244a60578baa996a597/content.htm
It is stated that in case of contract creation, you have to complete the "user-defined" contract item to add data, for example product or vendor product number.
For PO creation, there is nothing about "user-defined" items.
I analyzed this process in an SRM 5.0, and it looks correct: added items are passed to the PO.
For local PO creation, all the logic is done in BBP_QUOTE_PO_CREATE.
Here are steps for SRM 5.0
- read quote details (items and additional items)
- read RFQ details
- retrieve RFQ long texts
- fill PO header and complete it with ACS & BUK attributes of connected user
- merge normal & supplier added items (GOOD !!!!!)
- process items
- complete partners
- process texts
- process attachments
- BADI to determine purch group
- create the PO with BBP_PD_PO_CREATE
So it should work.
Debug this process starting with function BBP_QUOTE_PO_CREATE, or open an OSS message.
Rgds
Christophe

Flash for a stand-alone game.

Hi all First of all, sorry for bad english.
I've an idea for a game. Not a browser game, a desktop game.
Can I use Flash CS 5.5 to develop a real desktop stand-alone game? Yes, I can export my file in a .exe / .app application, but if I use Flash CS, my players will need to install / have, in any case, Flash Player / Air?
Sorry for stupid question but I'm a little bit confused.

Oh, yeah, I misunderstood. Thank u very much ^_^
Uhm, is it possible to modify the Player aspect? I mean, it's still a Flash Player and I'd like it look more "generic" as on OSX: no File, View etc menu, no "Adobe Flash Player" label etc.

Stand alone installer for flash player

Is it still possible to download a stand-alone installer for Flash Player (or any Adobe product)?
I really, really, really, really have NO interstes in any download manager. All I want is an installer I can just download. There used to be an ftp site that had up to date software that could simply and easily be downloaded, but I couldn't find any current software on that site. Where should I be looking?

You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X

Cisco SX10 stand alone possible?

Similar Messages

Maybe you are looking for