Cisco tacacs 5.4 for centos machines

Hello Everyone,
I am a newbie.
I have cisco TACACS 5.4 server installed.
I have few centos machines on my network and I want to use TACACS server to authenticate credentials for centos machines.
There are two types of users on my machines
1) admin
2) operator
Can you please guide me to the tutorial which can help me with authenticating credentials for non cisco products?
Thanks

Hello Sachin,
As you required a tutorial for authenticating in ACS 5.4, please go through the following link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/user/guide/acsuserguide/admin_config.html

Similar Messages

Cisco Model 870 router for home office connected to WRT160NL wireless router for personal use

I am using a Cisco Model 870 router for home office. I just bought a WRT160NL wireless router for home use. I setup the personal wireless router off the personal port of the 870 and can connect with my PC but not with my MAC machines. It can see the Network but when it asks me for passwords, it says they are wrong, which after several attempts I know they are correct.
The new router is setup as WPA2 personal. Can you advise?
Cisco Account Manager- Services

I think I answered my own question. I tried downloading something on my desktop and checked my cellular usage afterwards didn't go up so it's using my home internet and not my data plan.

Posture Check for Domain Machine

Hi,
i am setting up an ISE for dot1x and posture checking, I am unable to find a way to check for a policy whereby the laptop/workstation is a domain machine. So far, the rules and config guides are looking at ExternalGroups member of, but these are the log in credentials of the user and they can still pass the rule eventhough the machine is not a domain machine.
There is a registry key for domain machine, but this check is too easy to spoof. Is there any more effcient and "better" way to check for domain machine for posture check?
Thanks and regards,
WK Peck

Hello Aditya,
Configure WSUS Remediation
This example shows how to ensure that all employee computers with Windows 7 have the latest critical patches installed. Windows Server Update Services (WSUS) are internally managed.
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116143-config-cise-posture-00.html#anc17

Licensing for Personal Multiparty Basic for Virtual Machine

Hello,
we have ordered the Personal Multiparty Basic for Virtual Machine (free with CUWL Pro).
Now, we have received these PAKs:
LIC-TMS-APL-S80100 -
LIC-CNDTR-PMP-K9 -
SKU Quantity Available
LIC-CNDTR-PMP-K9 1
LIC-CNDTR-PMP-K9 -
SKU Quantity Available
LIC-CNDTR-PMP-K9 1
LIC-VTS-PMP-PAK -
SKU Quantity Available
LIC-VTS-PMP-PAK 1
LIC-VTS-PMPUWL-1SL 9
LIC-VTS-PMP-K9 2
LIC-AES-VTS-PMP-K9 2
LIC-VTS-PMP-INTOP 2
LIC-VMCNDTR-PMP-PK -
SKU Quantity Available
LIC-VMCNDTR-PMP-PK 1
LIC-CNDR-PMP-C2400 2
LIC-CNDTR-PMP-CL 2
LIC-CNDTR-PMP-B30 2
As you can see, there are:
2 "LIC-CNDTR-PMP-K9" PAKs.
Several SKUs inside the PAKs "LIC-VTS-PMP-PAK" and "LIC-VMCNDTR-PMP-PK" with Quantity Available = 2.
Now, since currently we have only 1 Cisco TelePresence Server and 1 Cisco TelePresence Conductor (so, no clusters at the moment), what we want to know is the following:
Which PAKs do we have to use? In particular, do we have to use only 1 "LIC-CNDTR-PMP-K9" PAK, or both?
Which exact quantities do we have to use from the various PAKs?
In other words, are the second "LIC-CNDTR-PMP-K9" PAK and the SKUs with Quantity Available = 2 only for redundancy/clustering, or are they needed for other purposes?
TIA and regards.

There's no limitation in licensing Telepresence Server but the platform capacity itself.
As far as you have the hardware that supports a such amout of screen licenses, you can fulfill them to this TS or vTS.
In the At-a-Glance document, Cisco refers to several hardware platforms that goes from the least to the uttermost deployments. (from BE6K MD to Cisco TS MSE 8710)

Oracle XE not running on CentOS machine

Hi,
I have installed Oracle-XE on a CentOS machine few months back and it was running fine since then, however for the past 2 days it is not running after I rebooted the machine.
When I checked the status of /etc/init.d/oracle-xe the output was
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 21-AUG-2012 12:32:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date                21-AUG-2012 12:32:35
Uptime                    0 days 0 hr. 0 min. 7 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pcrf.open-ims.test)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI am not able to connect any user with sql*plus command window, it just gives
conn techm
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directoryHere are my tnsnames.ora and listener.ora
tnsnames.ora
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = pcrf.open-ims.test)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
)listener.ora
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = pcrf.open-ims.test)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)Edited by: Peeyush on Aug 21, 2012 12:18 AM

This is the Oracle Apex Listener forum.
Please post on {forum:id=251}.
Hint: You perhaps need to START your DB.
Edited by: Prabodh on Aug 21, 2012 1:26 PM

HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
May half and half, 1.5 tb for time machine and 1.5 tb for data.
I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
Any recommendation?

As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

Can I use my time capsule for time machine back ups and as an external storage device?

I have a time capsule and have set it up so that my time machine back ups are saved on it, but I would also like to use it as an external hard drive. Is this possible?
I know nothing about computers so please tell me in very basic terms. thankyou!

By external hard disk we usually mean one plugged into the computer by USB or Firewire or Thunderbolt.
None of those works on the TC.. it is plugged in by ethernet or use wireless connection.. that means it is a network drive.. not an external drive. The difference might not mean much to you.. but it is totally different to the computer. In the former case the computer has full control of the disk. In the case of the network drive, the disk is controlled by the TC firmware and the files are stored and accessed by network. This has large implications.
So here is my standard response.
Store files on the TC.
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
The following are controls on the hard disk side.
Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
Even apple btw say don’t do it.
http://support.apple.com/kb/TS5168 Although mostly about FAT32 it adds network drives.
5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why my Jabber 9.2.3 Sign in like Cisco UC Integration(TM) for Microsoft Lync?

After I uninstall Cisco UC Integration(TM) for Microsoft Lync 8.6 from my computer and reinstall Cisco Jabber 9.2(3), I found my Jabber got the same interface of sign in with Cisco UC Integration(TM) for Microsoft Lync. it let me input the TFTP,CTI,CCMCIP server adress, instead of choosing the presence server and inputing the presence server address and domain.
after I sign in, it is aslo like Cisco UC Integration(TM) for Microsoft Lync, there is not the side button of contacts list, I can only search the person to call and can not send message or chat any more.
I tried many times to uninstall and reinstall Jabber,i failed, except I install Jabber 9.1(3), it works well. but I try to reinstall 9.2(3) again, it goes back like Cisco UC Integration(TM) for Microsoft Lync,why?
Thx.

Hi,
You probably had CUCILync 9.2 installed previosly, and since CUCILync 9.2 is based on Jabber phone mode, the interfaces are the same. (You have Jabber phone mode nterface now)
These settings are written in jabber-boostrap.properties file and Jabber reads them from here.
That file is stored here:
C:\ProgramData\Cisco Systems\Cisco Jabber
If you delete thise file, interface should change.
If you want to install Jabber and avoid such things, do this with option clear=1
- msiexec.exe /i CiscoJabberSetup.msi CLEAR=1 ...
Regards,
Srdjan

Can I use the same external hd for time machine and storage without partitioning it?

Hello,
I have been using an external hard drive for my Time Machine that was only used for this purpose.
I downloaded some files in it that I want to use, and I haven't backed up using Time Machine since.
Can I download the files on my MacBook from the HD without running into any problems, or is there anything else I should do?
I prefer not to partition the hd, since I will be deleting these files, or transferring them to a different HD, and using this HD only for Time Machine back ups, as I did previously.
** I am not sure if this changes anything, but I just updated from Snow Leopard to Lion.
Thank you so much

carolsm wrote:
Thanks Kappy, I will do that.
I just really needed these files and had no other hard drive to store them.
Do you think that it will be okay just this one time if I download the files on my MacBook without compromising my backups?
I will transfer them to a new hard drive, and erase them from my Time Machine external hard drive.
For the time being it will be fine. There is always a chance of a disc crashing and therefore not advisable practice. Some here run seperate drives with Time Machine, Cloned backup and file backup. I have a portable drive I keep Time Machine backups and file backups on. I am running that at my own risk, but no problems over the last couple of years. Just make sure I get it to my normal TM Backup disk as soon as I get home. Backing up those other files will not compromise your Time Machine backups as you asked.
Cheers
Pete

My 320GB external drive for Time Machine now only has enough capacity to keep a backup of one day. All my other backups are gone. What can I do to fix this situation?

I've been using a 320GB external drive for time machine for the last several years. The backups always worked fine and when necessary I was able to look at & restore older data from the time capsule. Recently, I keep getting the message that a backup cannot be completed and an older backup will be deleted. Usually this wasn't an issue because I still had several months of information on disk. Now a one-time backup takes up 315GB and therefore I only have a backup of the previous day. I don't understand this because I thought that the backup only saves information that has changed and doesn't copy everything everytime. What do I need to do to get my backups to a reasonable size so that I can keep at least 1 month data stored on it.? Please don't tell me I need a larger drive ... that would be too easy.

Get a larger drive for your TM backups.
The recommended size is 3 times what you are backup. So if 315 GB is a backup then you need a 1 TB drive.
Allan

I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!

Can I use one HD for 2 computer for time machine?

I have an imac and macbook. I bought a new 500G external harddisk for time machine.. can I share the harddisk between 2 computer?
Or I have to get 2 HD for 2 computer?

happygal wrote:
and can I put my other data on the external harddisk apart from the backup from time machine?
Absolutely. Yes. You will be limiting the space available for Time Machine though. The more space available, the further back your Time Machine backup trail can go.
Kryten

Can I use a network hard drive for time machine

Can I use a network drive for my time machine back up. I currently have a 1TB WD AND its full with mostly videos and other back ups?

Such a configuration is not supported. This does not mean it will not work, but it is not guaranteed to work reliably.
Considering the "mission profile" for a backup strategy, you should consider this an unacceptable application for Time Machine.
Read Apple Support Communities contributor Pondini's Time Machine FAQ discussion regarding this subject here:
http://pondini.org/TM/2.html
Scroll down to the pink box.
There are other, significant concerns regarding sharing a Time Machine volume with other content. Time Machine needs to have control of the whole volume.
More info here: Mac Basics: Time Machine

Cisco tacacs 5.4 for centos machines

Similar Messages

Maybe you are looking for