Cisco TCS and Show n Share recording

Can the TCS integration with SHow n Share be used to record content with a multi party call.
Using one of our EX60’s I was able to get TCS setup to record.
It is working for an individual but when we have two connected and try to call the TCS it will only let us do an audio.
It seems to be a VCS-related issue as once I have 2 end-points joined, the only option to join a 3rd is Audio – regardless if it is the TCS or a test system out on the Internet.

Our C40 codecs do not have the multisite license installed so that explains why this is failing when initiating from this codec. We have Edge 95 codec that can successfully complete the 3rd party video call natively. By default it has the multi-site option. That appears to be our limitation here.
EX60's do not have a MCU within the codec and i think would require an MCU on the network if we wanted to initiate a video conference from it. The EX90s do have an MCU within the codec but would require the purchase of an mcu option license to activate.
Please anyone correct me if you see a flaw in my findings!

Similar Messages

Re-Paired Cisco DMM and Cisco Show & Share

Hi ...
guys ... do anyone have experience to re-paired Cisco DMM and Cisco Show & Share ? I do re-paired it, but it doesn't success. First i pair Cisco Show and Share with Cisco DMS it success, but when i pair Cisco DMM with Cisco Show and Share it doesn't success (the proccess took so long about 30 minute i do ctrl C and it says failed to install certificate from Cisco Show and Share).
Anyone have idea ?
BR

Avoid Pairing Failures
•Pairing fails when you complete these steps in the wrong order. You must use AAI on your Cisco Cisco Show and Share appliance before you use AAI on your Cisco DMM appliance. Do not reverse this order or try to use AAI simultaneously on both appliances.
•Do not use the POP option on the pairing menu. Doing so may cause Cisco Show and Share to fail. If you accidently choose the POP option, you will need to re-pair the Cisco Show and Share and DMM appliances.
Pair Your Appliances
Procedure
Step 1 From the appliance that runs Cisco Show and Share 5.2:
a. Log in as admin to the Appliance Administration Interface (AAI).
b. Choose APPLIANCE_CONTROL > PAIR APPLIANCE.
c. Choose DMM.
Warning Do not choose any other option than DMM.
d. Enter the fully-qualified domain name (FQDN) for your Cisco DMM appliance.
This is the DNS name. Do not enter an IP address.
e. Press Enter.
Your Cisco Show and Share appliance receives and successfully imports a digital certificate from your Cisco DMM appliance.
Step 2 From the appliance that runs Cisco Digital Media Manager 5.2:
a. Log in as admin to the Appliance Administration Interface (AAI).
b. Choose APPLIANCE_CONTROL > PAIR APPLIANCE.
c. Choose SHOW_AND_SHARE.
Warning Do not choose any other option than SHOW_AND_SHARE.
d. Enter the fully-qualified domain name (FQDN) for your Cisco Show and Share appliance.
This is the DNS name. Do not enter an IP address.
e. Press Enter.
Your Cisco DMM appliance receives and successfully imports a digital certificate from your Cisco Show and Share appliance.
See Cisco Link :
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/aai/administration/guide/pair.html

DMM 5.4 and Show and Share

I noticed that DMM 5.4 is no longer supporting Show and Share. I was just wondering what the Road Map is? Is that coming later, or is Show and Share being phased out? What would be the replacement if we currently use DMM 5.3 and Show and Share?
Thanks!

Bill,
The version of DMM that now comes with the CXS bundle does not support signage (DMPs). The current purchase path if you need SNS & DMPs is to purchase an SNS/DMM combo plus an AppSpace or standalone DMM box.
Thank you,
Justin Ferello
Technical Support Specialist
KBZ, a Cisco Authorized Distributor
http://www.kbz.com
e/v: [email protected]

I have created a projet on imovie and when I try to share it. it automaticall closes and shows an error.. what should I do.. I dont want to loose all my documents at all...?? its very urgent plss tell a solution to it as soon as ppossiblc

I was working on my project on imovie and when I was trying to share it.. it automatically closes and shows an error... I have tried to do it so many times and it shows the same error again and again.. I dont want to loose the document at all.... I facing too much problem plss help me plss its very urgrnt for me... plss help me :-(

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

My mac, ipad and apple tv share the same itunes account. Why do movies rented from itunes on my ipad or mac not show up in my apple tv? is there a way to get them there?

My mac, ipad and apple tv share the same itunes account. Why do movies rented from itunes on my ipad or mac not show up in my apple tv? is there a way to get them there?

Rentals are one-time only downloads, they will not show on other devices/computers for redownloading.
If you rent a film on your iPad or Apple TV then you can only watch it on that device. If you rent it on your Mac then you can move it from there to your iPhone or your Apple TV (if it's a first gen Apple TV) : FAQs about renting movies from the iTunes Store :
If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation). To do this, connect the devices and sync using USB. When you move a rented movie from your computer, it will disappear from your computer’s iTunes library. You can move the movie between devices as much as you want, but you can only have it on one device at a time.
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
Renting and moving rentals from a computer : How to rent a movie from the iTunes Store on your computer.

Calendar apps: 1. That my wife and I can share. 2. That shows some of the text in the full month view. 3. That can have "public" events and "private" events.

Hello All,
I am looking for a calendar app that my wife and I can share on both of our iphones. I am new to this and haven't found an app that will do what I want.
1. I want the full month view to show some of the text of each event: Like Pocket Informant and Monthly Calendar Mocha do (not just a dot).
2. That both of us can post and see each other's events.
3. That each of us can post "private" events that the other person won't see on their phone. Things like, "Wife's surprise party."
4. That sync's both calendars automatically.
I know a lot of people use Fantastical, but I don't think that would give me the text in the full month view.
Is there an app that can do all of the above?
Thanks in advance.
Rick

Sharing and syncing is a feature of the calendar database; you can have multiple calendars, and each can be private, shared with specific other iCloud users, or public. If you have a Mac you can set that up in the Calendar app; for either Mac or Windows you can set it up by logging in to iCloud.com using your Apple ID.
The other calendar apps all use the Apple calendar database; they just have different ways of presenting the content, and can also take advantage of "hidden" features of the Apple calendar database (such as adding icons to entries).

How to count records from 2 tables and show in RDLC Report

hi all,
its being a one day searching for the solution but No Luck.
I have two SQL tables tblstudetail and tblfeereceiptdetail.
i just want to count records from both tables and show in RDLC report.
I tried SQl Query Like This:
select a.session, a.course,
Count(CASE a.ADstatus WHEN 'OK' THEN 1 ELSE 0 END ) AS Admission,
Count(CASE s .I_receiptstatus WHEN 'OK' THEN 1 ELSE 0 END) AS Feeprint
from
tblstudetail a
FULL join
tblfeereceiptdetail s on s.studentID = a.studentID
where a.session = '2015' AND s.Fsession = '2015' AND a.adcat = 'Regular'
GROUP BY a.session,a.course
ORDER by a.course
The result Show the Same Value in Both columns
Session    Course      Admission       FeeDetail
2015          B.A. I               275              275
2015          B.A. II              307             307
2015         B.A. III             255            255
2015          B.Sc. I             110             110
2015   B.Sc. II           105            105
2015          B.Sc. III            64               64
Actully I want to Count How many ADMISSION have been Taken(FROM tblstudetail) and How many FEE RECEIPT have been Print (From tblfeereceiptdetail).
please guide me for this as soon as possible.
thanks in advance...

I am counting 'OK' in both the table columns I.e 'ADstatus' in tblstudetail and 'feereceiptstatus' in tblfeereceiptdetail
please suggest me

Me and my dad share an iTunes account and all of his music he has purchased on ITunes shows up on my songs list with a cloud icon next to it. How do I get rid of these from my songs list? Cuz it's doing the same thing on my iPhone

Me and my dad share an iTunes account and all of his music he has purchased on ITunes shows up on my songs list with a cloud icon next to it. How do I get rid of these from my songs list? Cuz it's doing the same thing on my iPhone.

Go to Edit > Preferences > Store, and uncheck the box for "Show iTunes in the Cloud purchases."

Bex Report to show only latest record on report and then history

Hello Gurus,
Table 1:
Employee
Valid From
Valid To
Hours Perday
1900
01/01/2014
02/28/2014
8
1900
03/01/2014
03/31/2014
6
1900
04/01/2014
12/31/9999
4
Table 2:
I have above in DSO, On report I need to show the latest record without Valid From and Valid To Fields shown below.
Employee
Hours Perday
1900
4
And when user drags Valid From and Valid To field from free charac. it should show history as in DSO. I have leveraged 0VALIDTO customer exit processing variable with variable as "Value Ranges" >= Key Date so when query is executed if date entered is 04/01/2014 it should bring last record with Hours perday=4 and if date is entered as 03/01/2014 should bring two records with hours per day 6 and 4 and so on.
The problem on report is that the record being pulled is always latest but when Valid To and Valid From free characteristics are dragged on the report it still shows the latest record and no history. Is there a way that when key date is entered it should show latest record as per >= of that key date and when Valid from is dragged in to report it should display history prior to that key date?
Thanks,
Sam

Hi Sam,
You are almost in the right direction. A little fine tuning is required in your process
As you are dealing with Time dependent Master data, the ideal thing to use is "Key Date" in the query. But there is a limitation here. Key Date can show only single date's relevant master data. I mean if you enter 03.01.2014, only second record would be shown. Key date cannot work on Multiple dates or ranges to fetch historical data or multiple records accordingly.
To achieve your requirement, you should not use Key date in your query.
I have leveraged 0VALIDTO customer exit processing variable with variable as "Value Ranges" >= Key Date
The above idea is good. You should make Valid From as Cust exit(i_Step =2) processed and make it as User Entry enabled. So that user exit code can pick up values as per > = Valid From(User Entry Based). But this user exit will be picking historical records if user enters other than latest Valid from date. I mean no drilldown is required. You need to use Valid from in rows also, I believe.
Try this and let me know if you want any more inputs.
Regards,
Suman

Fetch records from two different dbs and show it in a single af table

Hi,
I have a requirement, such as say, there are two databases having their own employees table. I need to query them both and show them in the UI using the af table tag. Any idea how this can be achieved efficiently please ?
regards,
Vijai

Hi,
Always mention your JDev version. Are you going to make the resultant data as read-only? If yes, you can create a db link pointing to another schema, and then use union all to merge the data in the query of the VO.
Ex:
select col1, col2, col3 from table1
union all
select col1, col2, col3 from table2@db_link_pointing_to_diff_schema
-Arun

How to use flash media server with cisco show n share live event module?

hello all
Is it possible to use flash media server in show n share (non dme)live event ? i 've configured flash media server, can receive multicast streams, bu i have no idea what to write in video url fild in the live event basic setup.

Hi Temur,
You should be able to stream from a Flash Media Server.
The URL should look like this:
rtmp://xxx.yyy.com//flv:
You can do some tests from a PC to get the exact URL that would suit your environment.
Regards,
Nicolas

Cisco ASA and Internal Hosted Website

I have a Cisco ASA 8.4. I have an internal website for an application that they use both internal and externally (app.domain.com/app is 10.0.0.3) The company that hosts their External Website and DNS created a record that points to http://app.domain.com/app to their public ip 1.2.3.4. Externally everything works great I have port forward for 80 working. The problem is that when the users bring their laptops in to the office they are unable to get to the interanlly hosted website. I think the the firewall is having an issue letting the traffic back in. If i use the internal DNS and create a zone for domain.com with an A record for app.domain.com and point it to 10.0.0.3 the internal address..it works. Of course when they try to access the external website it does not work. So if create an A record that points to the web hosts address, it kinda of works...parts of the website don't come up. I really think I there is something like a hairpin or u-turn that needs to be done. Oh by the way this is my first real experince with an ASA. The Symantec Gateway they had worked great. I looked in the config and there were no hairpin or crazy rules, just the standard port forward for 80. Any ideas? I have tried several suggestions i found on the web, but none have worked.
Thanks
Nick

Hi,
The main problem with such setup (from the ASAs perspective) is usually that the NAT for the server is configured from certain source interface towards some destination interface.
You might for example have this configuration
object network WEB-SERVER
host 10.0.0.3
nat (inside,outside) static interface service 80 80
This would enable connectivity from the behind "outside" interface towards which the translation is configured but not from behind "inside".
I am not sure how different vendor firewalls handle this situation if you say that you only had the original Static PAT configuration towards the external interface.
If you wanted to enable connectivity to the public IP address from your LAN you would have to make a NAT towards the "inside" interface from the "inside" interface. And thats not all. You would also have to configure Dynamic PAT for the source hosts on the LAN behind "inside". The reason for this is that the ASA needs to see the whole TCP conversation between the client/server and since we PAT all the users to the ASA "inside" interface IP address that makes sure that ASA sees the whole conversation between the hosts.
So you could try this configuration on the ASA
object network PUBLIC-IP
host
object network WEB-SERVER
host 10.0.0.3
object network LAN
subnet
nat (inside,inside) 1 source dynamic LAN interface destination static PUBLIC-IP WEB-SERVER
The above configuration would essentially look for connections coming from behind "inside" interface from the source address belonging to LAN to the destination IP address of PUBLIC-IP and proceed to UN-NAT the PUBLIC-IP to WEB-SERVER and PAT the source address to "interface" (inside interface IP address)
You would also perhaps needs to add this command
same-security-traffic permit intra-interface
This enabled the ASA to pass traffic through the same interface that the traffic arrived in. So basically do that Hairpin/U-turn
You can check the current configuration with the command
show run same-security-traffic
Do notice that there is a similiar command with a different parameter at the end (inter-interface vs. intra-interface). So check that you have the correct one.
Hope this helps
Let me know how it goes
- Jouni

Aplication WFO don't show the files recorded

Hi,
I am using QM 8.5.2 with UCCX 8.1 and CUCM 8.6 only for compliance recording, my problem is that the aplication desktop WFO don't show the files recorded, and I have the folow error in the QM server.
dbupload.log
ERROR QMDB2001 SQM database request failed: The DB-API returned a DB error. SQL Statement returned false..
dbproxy.log
ERROR QMDB2001 SQM database execute failed: The INSERT statement conflicted with the FOREIGN KEY constraint "EventAudit_person_FK". The conflict occurred in database "SQMDB", table "dbo.Person", column 'id'..
mana.log
INFO MANA0000 Running polling diagnostic...
2012-08-21 11:52:31,218 INFO MANA0002 Notification: <2012-08-17 12:20:17 QM1000 [CATASTROPHIC] Mana no pudo conectarse a Quality Management CTI Service (172.24.4.9): DESCON.>
2012-08-21 11:52:52,328 ERROR MANA2017 Failed to send notification using SMTP.
2012-08-21 11:52:52,328 INFO MANA0000 Polling diagnostic finished.
2012-08-21 11:52:52,328 INFO MANA0000 Next poll at 2012-08-21 12:02:30
Thanks.
Regards,
Luis

Hi Luis,
QMDB2001
Text:SQM database failed: .
Type:Error
Add’l Info:An operation to the QM database failed, and data may have been lost.
Action:Ensure that the QM database server is running.
Check the configuration settings for connecting to the database.
Confirm that the user has privileges to perform the operation.
Ensure that the user has privileges to perform the operation.
Repeatable occurrences of this, after checking all of the above, may indicate a software problem which should be reported.
Please refer the below link for more information,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/workforce_optimization/qm_2x/reference/guide/qm26ecd-cisco.pdf
Hope it helps.
Anand
Please rate helpful posts !!

TPS, TCS and TX endpoints

Hi
I've seen a few threads where TCS and CUCM registered endpoints are discussed but can't find a definite answer to this question:
Can TCS 6.x (registered to VCS) record Immersive Telepresence (TX9000s) meetings hosted on a TPS ?
What about same scenario but scheduled meetings through TMS?
Thanks in advance
OJ

To add to what Wayne said - this means you will record whichever segment is the active speaker at any one time (only), rather than all three screens at the same time. You will of course get all the audio.
Did the same thing a while back with TCS + TP Server + CTS-3000 - it worked fine.
One thing I did was to add the TCS manually as an endpoint to the TP server and set its layout to speaker switched, rather than active presense, so the film strip didn't show up in the recording.

Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

Cisco TCS and Show n Share recording

Similar Messages

Maybe you are looking for