Cisco TelePresence - more detailed specs and questions

Hello,
I am currently conducting a light research into various video-conferencing systems and would love to know a little more about Cisco TelePresence video-collaboration solutions.
I have read the on-line publications made available by Cisco, but have a few remaining questions.
Following is the list of such questions, should you find yourself being able to answer any of them - please do net hesitate to do so:
Q. What is the frame rate of a 1080p video stream when it is being transmitted at no greater than 5Mbps bandwidth consumption?
Q. What is the maximum possible frame rate for a 1080p video stream?
Q. Given the 5 Mbps bandwidth consumption limits, what is the latency (without taking into account the underlying network latency) to encode and then decode the 1080p video stream at 25 fps?
Q. For the purposes of subjective visual evaluation - are there any downloadable images such as a single frame (1:1 screen-shot) of the 1080p video stream transmitted at 5Mbps and 25FPS?
Q. Security-wise ? what kind of encryption (if any) is being used to encrypt the video streams and how interoperable such encryption systems happen to be? For instance, are the encryption keys communicated in accordance with certain protocol/standard or is the process specific to Cisco products?
Q. Has anyone (formally or otherwise) tried to interoperate Cisco Telepresence with other video-streaming solutions (e.g. Conference-XP, VLC, etc.)? If, so what were the results?
Q. Do Cisco Telepresence systems support multicast traffic (e.g. one source / many recipients idiom).
Kind regards, Leon Zadorin.

also, just have 1 more question:
Q. In case if someone (i.e. a 3rd party software developer) was prepared to integrate their own video-streaming solutions (e.g. VLC, Conference XP, AccessGrid, etc.) with Cisco's Telepresence systems - is / will be there any way to obtain necessary technical documents regarding the functionality of Telepresence systems in order to achieve the desired interoperability?
To start with, such interoperability would be done at the very "basic" level: e.g. being able to see Telepresence's video streams in say VLC or AccessGrid or some other system and then may be being able to transmit video streams from VLC or similar in a format that allows Telepresence system to see the 3rd party content.

Similar Messages

I am fairly new to MAC products and I just purchased a new iMac, which I love. I am doing well with it but am looking for some more detailed guidance and tips and tricks. Can anyone recommend any literature etc...

I am fairly new to MAC products and just purchased a new iMac, which I love! Can anyone recommend some more detailed literature or site for learning my way around the nuances of my iMac? copy and paste, building folders, storing data, bookmarking etc...

These are the Mac Essentials. The most Basic function tools of the Mac
http://support.apple.com/kb/HT2477
These are Mac 101 Articles. These are a bunch of articles that have the information on any app that is on your computer.
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=101
This is an article that will help you get used to your new Mac since you're Moving from a PC to Mac
http://www.apple.com/support/switch101/

No more detailed specs for legacy laptops

Hi All,
Where can I get a complete list of ever built X60(s) and X61(s) **types** along with their full specs? (assuming of course that each type uniquely IDs its spec)
This one doesn't contain a single word about X60(s)/X61(s) unfortunately:
www.lenovo.com/psref/pdf/ltwbook_WE.pdf
Many thanks in anticipation,
Dmitriy
X1 20A8-S0WT08, 2x X61s 7667-34G, X61s 7667-Y24, X61s 7666-AA5, X60s 1702-W96, T43 2669-YJ6, T42 2373-Q91
Solved!
Go to Solution.

Hi Dmitriy,
I found an old link to the North American ltwbook, but none for Western Europe. It may exist but I don't know where to look Here's the NA ltwbook in case that helps.
The QuickPath box at the old support site will give per-MTM specs. Maybe that is sufficient for your needs?
I don't know that either of these links will persist, so use them soon.
ThinkPad Notebooks; 2005 to 2013 (withdrawn models)
http://support1.lenovo.com/en_US/
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Tecra A11-1EJ - more detailed specs help

Tecra A11-1EJ, might be my next notebook. but as an audio pro related hardware compatibility i need info. which USB controller is installed (example intel ICH10)?
This info is essential for time critical low latency audio hardware connected.

thanx doc, but the same pdf I have.
NAME of the controller? CODE? An example: dell precision, nice design, rough pc, has it all. inside it`s all chinese chipsets, a pc worth 400eur. sold for 2500eur. not bad. but low latency audio forget on chinese chipsets. right now my Satellite P200-1BA still goes and on all texas instruments chipsets, any audio hardware works like on a desktop, no wonder why. Good job toshiba here!
But the problem is here, I am a customer that do not mind paying 200+eur, but give me the best, I need less than 4ms latency here! I need a workstation, and I do not mean design, I meand brand chipsets, best hardware. Without this we have no performance guys.
Name? You know what you sell or is it a secret?

Ask the Expert: Cisco TelePresence for the Enterprise

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Telepresence® for the enterprise.
Cisco experts Jaret, Fernando, and Fred will be covering all Cisco TelePresence products. Topics include Cisco TelePresence endpoints and TelePresence infrastructure such as the Cisco TelePresence Video Communication Server (VCS), Cisco Expressway Series, Cisco Unified Communication Manager (CallManager), Cisco TelePresence Servers (MSE 8710, on Virtual Machine, etc.), MCU (MSE 8510, etc.), Cisco TelePresence Management Suite (TMS), and all other Cisco TelePresence related devices.
Jaret Osborne is an 8-year Cisco Advanced Services veteran. In his Advanced Services tour, Jaret has covered all aspects of Cisco Unified Communications and TelePresence products, including both enterprise and service provider verticals. Most recently Jaret has been working with global service providers supporting their Cisco TelePresence as a Service offerings while also incubating new cloud services at Cisco.
Fernando Rivas is a Cisco Advanced Services NCE, starting in the Cisco Technical Assistance Center (TAC), 2007, on the Collaboration Technology Team mastering the Cisco Unified Communication technologies and specialized in call control CUCM,VCS) and conferencing (MeetingPlace, Telepresence). In 2011, he joined Cisco Advanced Services as a member of the Cisco Collaboration team and participated in several Cisco TelePresence and video-related technologies deployments. Currently he is a member of the Video Cloud Technology Team, supporting video exchanges in several and architecting new private video cloud solutions for large enterprises. Fernando holds a routing and switching CCIE® certification (22975).
Fred Mollenkopf is a Cisco Advanced Services Network consulting engineer working at Cisco for the last 7 years. Fred has led some of the largest Cisco Unified Communication and Collaboration deployments done for Cisco customers and partners. Over 15 years’ experience in data networking with a specialization in Cisco Unified Communications in 2004. Currently he is a member of the SP Video Advanced Services Team, supporting SP video exchanges and the Cisco Telepresence solutions. Fred maintains an active CCIE® in Voice (17521).
Remember to use the rating system to let Jaret, Fernando, and Fred know if you have received an adequate response.
Because of the volume expected during this event, Jaret, Fred, and Fernando might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video Community, under the sub-community TelePresence, shortly after the event. This event lasts through August 15, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Tenaro,
Additionally here are the most common login issues. Unfortunately this includes items related to Presence implementation but I commented where we did not use these in our lab setup for CUCM Phone Capabilities only.
Login Issues
Problem:
Jabber Unable to Sign-in Through MRA
Solution
This can be caused by a number of things, a few of which are outlined below.
1. Collaboration Edge SRV record not created and/or port 8443 unreachable
For a jabber client to be able to login successfully using MRA, a specific collaboration edge SRV record must be created and accessible externally. When a jabber client is initially started it will make server DNS SRV queries:
_cisco-uds : this SRV record is used to determine if a CUCM server is available.
_cuplogin : this SRV record is used to determine if an IM&P server is available.
_collab-edge : this SRV record is used to determine if MRA is available.
If the jabber client is started and does not receive an SRV answer for _cisco-uds and _cuplogin, and does receive an answer for _collab-edge then it will use this answer to try to contact the Expressway-E listed in the SRV answer.
The _collab-edge SRV record should point to the FQDN of the Expressway-E using port 8443. If the _collab-edge SRV is not created, or is not externally available, or if it is available, but port 8443 is not reachable, then the jabber client will fail to login.
2.  Unacceptable or No Available Certificate on VCS Expressway
After the jabber client has received an answer for _collab-edge, it will then contact the expressway using TLS over port 8443 to try to retrieve the certificate from the expressway to setup TLS for communication between the jabber client and the expressway.
If the Expressway does not have a valid signed certificate that contains either the FQDN or domain of the Expressway, then this will fail and the jabber client will fail to login.
If this is occurring, the you should use the CSR tool on the Expressway, which will automatically include the FQDN of the expressway as a Subject Alternative Name.
MRA requires secure communication between the Expressway-C and Expressway-E, and between the Expressway-E and external endpoints.
Expressway-C Server Certificate Requirements:
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation. The Expressway-C should automatically include these in the CSR provided that an IM&P server has already been discovered on the Expressway-C.
The names in FQDN format of all Phone Security Profiles in CUCM configured for TLS and used on devices configured for MRA. This allows for secure communication between the CUCM and Expressway-C for the devices using those Phone Security Profiles.
Expressway-E Server Certificate Requirements:
All domains configured for Unified Communications. This includes the domain of the Expressway-E and C, e-mail address domain configured for Jabber, and any presence domains.
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation.
The MRA Deployment guide describes this in greater detail on pages 17-18. (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Ac...
Note: In our lab for testing Phone Capabilities only, we did not include the Chat Node Aliases in the certificate as we were not using IM&P.
3.  No UDS Servers Found in Edge Config
After the Jabber client successfully establishes a secure connection with the Expressway-E, it will ask for its edge config. This edge config will contain the SRV records for _cuplogin and _cisco-uds. If these SRV records are not returned in the edge config, then the jabber client will not be able to proceed with trying to login.
To fix this, make sure that _cisco-uds and _cuplogin SRV records are created internally and resolvable by the Expressway-C
More information on the DNS SRV records can be found on page 10 of the MRA deployment guide for X8.1.1 (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-1-1.pdf)
Note: In our lab for testing Phone Capabilities only, we did not include the DNS SRV for _cuplogin.
4.  The Expressway-C logs will indicate the following error: XCP_JABBERD Detail="Unable to connect to host '%IP%', port 7400:(111) Connection refused"
If Expressway-E NIC is incorrectly configured, this can cause the XCP server to not be updated. If the Expressway-E meets the following criteria, then you will likely have this issue:
Using a single NIC
Advanced Networking Option Key is installed
Use Dual Network Interfaces option is set to “Yes”
To correct this problem, change the “Use Dual Network Interfaces” option to “No”
The reason this is a problem is because the Expressway-E will be listening for the XCP session on the wrong network interface, which will cause the connection to fail/timeout. The Expressway-E listens on TCP port 7400 for the XCP session. You can verify this by using the netstat command from the VCS as root.
Note: We used a Dual Network Interface Expressway for testing but were not using XCP, so this was not applicable to us.
5.  VCE-E Server hostname/domain name does not match what is configured in the _collab-edge SRV.
If the Expressway-E Server hostname/domain name does not match what was received in the _collab-edge SRV answer, the jabber client will not be able to communicate to the Expressway-E. The Jabber client uses the xmppEdgeServer/Address element in the get_edge_config response to establish the XMPP connection to the Expressway-E.
This is an example of what the xmppEdgeServer/Address would look like in the get_edge_config response from the Expressway-E to the Jabber client:
<xmppEdgeServer>
<server>
<address>ott-vcse1.vcx.cisco.com</address>
<tlsPort>5222</tlsPort>
</server>
</xmppEdgeServer>
To avoid this, make sure that the _collab-edge SRV record matches the Expressway-E hostname/domain name. Enhancement CSCuo83458 has been filed for this.
Note: This was one of our issues when we first setup. We adjusted our Expressway-E to insure the below:
System > Administration > System Name this was the FQDN
System > DNS > System Host Name was the host portion of the FQDN
System > DNS > Domain Name was the domain portion of the FQDN
System > Clustering > Cluster Name (FQDN for Provisioning) was the FQDN
6. Unable to log into certain IM&P servers. VCS logs say "No realm found for host cups-example.domain.com, check connect auth configuration"
From the Expressway-E, go to Configuration -> Unified Communications -> IM&P Servers. Open each server and click "Save" again. Not sure exactly why this happens.
Note: This was N/A to our test and can be ignored with Phone Capabilities only.
Thanks
Fred

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Backup VHD size is much more than expected and other backup related questions.

Hello,I have few windows 2008 server and i have scheduled the weekly backup (Windows Backup) which runs on saturday.
I recently noticed that the actual size of the data drive is only 30 GB but the weekly backup creates a VHD of 65 GB.This is not happening for all servers but for most of the server.Why is it so..and how can i get the correct VHD size..60 GB VHD does't make
sence for 30 GB data.
2. If any moment of time if i have to restore entire Active Directory on windows 2008 R2 then is is the process same as windows 2003..means going to DSRM mode,restoring the backup,authoritative restore or is there any difference..
3. I also noticed that if i have a backup VHD of one server (Lets Say A) and if i copy that Backup to other server (Let Say B) then windows 2008 only gives me an option to attach the VHD to server B but through backup utlity is there any way to restore the
data from the VHD,Currently i am doing copy paste from VHD to server B data drive but that is not the correct way of doing it..Is it a limitation of windows 2008?
Senior System Engineer.

Hi,
If there are large number of files getting deleted on the data drive, the backup image can have large holes. You can compact the vhd image by using diskpart command to the correct VHD size.
For more detaile information, please refer to the thread below:
My Exchange backup is bigger than the used space on the Exchange drive.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ccdcb6c-e26a-4577-ad4b-f31f9cef5dd7/my-exchange-backup-is-bigger-than-the-used-space-on-the-exchange-drive?forum=windowsbackup
For the second question, the answer is yes. If you want to restore entire Active Directory on windows 2008 R2, you need to start the domain controller in Directory Services Restore Mode to perform a nonauthoritative restore from backup.
Performing Nonauthoritative Restore of Active Directory Domain Services
http://technet.microsoft.com/en-us/library/cc816627(v=ws.10).aspx
If you want to restore a backup to server B which is created on server A, you need to copy the WindowsImageBackup folder to server B.
For more detailed information, please see:
Restore After Copying the WindowsImageBackup Folder
http://standalonelabs.wordpress.com/2011/05/30/restore-after-copying-the-windowsimagebackup-folder/
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Cisco Telepresence and Meeting Place Integration with Third Party Call Pros

Dear colleages:
i want to ask if Cisco Telepresence can integrate with 3rd party call processing systems.
as my project has already existing Nortel Communication Server 1000,
which supports:
Operating System: VXWorks and Linux
Network Signaling Protocols: H.323v4, MCDN, SIP, LDAP, QSig, QSS, in band and DPNSS
Trunking Support:
IP:IP Virtual Trunks using IP Peer Networking over H.323 or SIP
Digital: DTI, ISDN-PRI, ISDN-BRI
Analog: Loop and Ground Start CO, FX, WATS, two or four wire E&M, four wire DX, DID, TIE, RAN Paging.
and i want to build Video Converence system over the WAN.
please to tell me if that integration is possible and what is the design components that is required for such project to be handled from A- to Z.
Regards,

I have been told that i need to use SIP protocol API instead of TAPI to have a TRUE VOIP Windows solution.
Could you guys please tell me the difference between SIP API and TAPI?
And could you please suggest a way which API (SPI or TAPI) the OnCast solution is based on (http://www.litescape.com/oncastsoftware.html) - we have to develop something similar.
Thank you for your replies,
Alexey

More details about ASAP steps and ASAP forms

I overally know ASAP and its 5 phases.
But unfortunately i couldnt find more detail information about it.
I mean level2 & level3 steps of each phase and descriptive information about what exactly is each step.
Also wether any forms exist related to each step i really interested in having such forms.
Regards
Abedi

Hi,
Please read below links:-
http://help.sap.com/saphelp_47x200/helpdata/en/48/623972d55a11d2bbf700105a5e5b3c/content.htm
http://service.sap.com/asap & http://service.sap.com/roadmaps
http://www.sap-basis-abap.com/sapgeneral/what-is-asap.htm
Regards,
Anil

Trying to take computer back to factory specs and now I get this message a flashing folder with a question mark

Trying to take computer back to factory specs and now I am gettin a flashing folder with a question mark on it

The flashing folder means the computer is unable to find a valid boot disk. If you booted into the Recovery Drive using Command R and formatted the drive you must also download and install the operating system. Have you done that? If not, reboot using Command R and do so.

How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

Guys,
How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
Please add you reply's to this. As it might help to get things moving...
Bruce

I created a track on my computer and added it to iTunes
iCloud only syncs and stores purchases from the iTunes Store.
"With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices".
Apple - iCloud - All your content on all your devices.

Okay i want to go to smart phone with 2 year contract. i am wavoring between the 2g to 4g plan. verizon has decided not to chat with me for the moment. because i'm annoying. my question is, can i alter the G factor as i go if i need more need less and lea

okay i want to go to smart phone with 2 year contract. i am wavoring between the 2g to 4g plan. verizon has decided not to chat with me for the moment. because i'm annoying. my question is, can i alter the G factor as i go if i need more need less and leave everything else the same?

you can start out low and increase your data allowance as you need throughout the month, backdating it to the beginning of the billing cycle so you don't have overages; however, I found out the hard way that you cannot decrease your data allowance during the month and backdate it so you don't overpay for unused data.
what I do now is reset my data allowance to 2GB at the beginning of every bill cycle and then increase it if I get warnings that I'm going to go over... and I check it 3 days before my bill cycle ends to see if I think I might need to bump it up before the end of the bill cycle
it's annoying, but otherwise I end up paying thru the nose for overages or overpaying for data I don't use
BTW, I'm on the More Everything plan, which is the same plan you'll get unless you go Edge (where you pay the full price for the phone but don't get the 2-year commitment to it)

Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center ??

Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center or can i call the normal support for my country ???

For liscensing of iOS related hardware? You'd need to contact the Made For iPod Program.
<http://developer.apple.com/ipod/>
Their contact address is <[email protected]>

Cisco TelePresence - more detailed specs and questions

Similar Messages

Maybe you are looking for