Cisco touch screen control panel

On Cisco Touch panel How do you find out the option for the username and password.
which button shows to put the username and password and how do I will find out power button.
Thanks
Abdul

You may need to calibrate the screen:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03559852&sp4ts.oid=3356526
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

Scroll stuttering and loss of touch screen control

Since downloading IOS 8.1.3, my iPhone6 has begun doing some really crazy stuff when I am scrolling up or down with my finger. Its not 100% all of the time but when it happens, initially, the scrolling will begin to stutter away from my finger, followed by a complete loss of control over the touch screen. At that point, random buttons all over the screen will be getting clicked as if I was touching them, but I'm not.
This has been consistent across all apps and has only begun for me following iOS 8.1.3.
Has anyone else experienced this problem or know of a solution? Thanks.

Same exact problem as you have on my iPhone 6, and same cause - 8.1.3. I am not even going to install 8.2 for fear of more, new bugs. Nothing on the list of bug fixes for 8.2 says anything about this shaky screen and things being clicked on their own problem.
Any luck with this issue being fixed with 8.2? Anyone still experiencing this with 8.2?

Problem with touch screen control

I got my incredible yesterday and activated it.
I have problems:
-When I use the zoom (pinch/spread) on larger screens, I loose the ability to scroll up/down/right/left (swipe, slide).
-I lose the use of the four main buttons.
-I get strange menus popping up.
-The phone completely freezes up.
For example on the Maps app:
I "pinch/spread" to zoom in on the map. Then, I want to move the screen up/down/left/right. Most of the time, I am unable to do so. It just keeps on zooming in and out. I am only using one finger and moving in a straight line (up, down, left, right), but it keeps zooming in and out.
Also, When this zoom problem happens, the four buttons (home, menu, back, search) do not work at all.   They are completely useless.
Another thing it does when it is stuck "zooming", a pop-up box appears. This pop-up box has three icons in it:
-two papers
-a magnifying glass
-and a green circle with two arrows pointing off from the circle
The touch screen is frozen, so I have no idea what those icons are supposed to do (I could probably guess).
When this box comes up, if I try using the joystick, it will start making green lines and boxes all over the screen. The touch screen and four buttons are still totally useless.
Other times, a menu appears for no apparent reason. I can't select anything in the menu, or back out of it. Again, the touch screen and four buttons are totally useless.
I must turn it off, then back on. Then, I can back out of the menu.
It is NOT just the Maps app. It happens regularly while using the browser to read web pages. I've also had the phone freeze up doing other various things (like the flash light).
I've removed the battery and restarted (soft reset). I've also done the factory reset (hard reset). The problems continue exactly as before.
The problems are not 100% of the time. I have been able to use it some, and can see how it is supposed to work (and it is great). But, the zooming problem makes internet use, and the Maps app nearly impossible (I am sure I would have a long list of other programs, but I only started using it yesterday). I can use these things fine for a minute or two before the problems start (usually starting with the zoom problem).
Sorry if this is long (I am copy/pasting it to send to Verizon support).
Any ideas?

Make sure you return the phone if the touch screen is unresponsive. Continue to return any replacement until you get one that the screen is complliant with your touch, skin chemistry and local climate.
This issue cost me the cost of a replacement phone, and repacemet of broken touch screen glass and LCD when I continually tried to use more pressure to get the screen to respond.
Mine was less responsive when the phone was receiving a call and was ringing, which tells me it may be a design flaw that will not carry enough current to the touch screen when the ringing is occuring.
The replacement is a new one that I had to purchase as they would not warranty the other one.  It is also unresponsive to the touch when in standy and the phone is ringing. I have learned to be persistently working with it the entire duration of the ring cycle, and am 75% effective in answering calls before they time out.
The original one was repaired(?) at my expense, and came back totally unable to wake from standby. I have to take out the battery and power it back up to get it to work again. Presently, I have the display timeout set to 1 hour. If the phone rings after the screen goes to standby, I have to let it ring and go to voicemail, then remove the battery and power it back on.
The original one was 6 weeks old, but the entire warranty was void once the touch screen glass cracked. It was easy to verify that the phone had not been dropped. The screen glass cracked under thumb pressure.
Of course, neither Verizon or HTC had ever heard of this occuring before. I spent the better part of today trying to find the right combination of applications and timing to wake it from standby. I finally reformatted the SD card, reformatted the Phone Storage, do a factory data reset and finally a new firmware load. Nothing will restore the screen.
If I had to guess, I would say there is a trace on the board that was not sufficient to carry the current of a full volume ringtone at 0dB.   It could also be parameters on the touch screen that are too tight to compensate for differences in skin resistance/capacitance. Also is the possibillity of bad ground integrity between the phones individual circuits.
It is all academic, as I have spent another 200.00 on the original to replace the touch screen and LCD Display, only to find out that the phone is now unable to respond to the touch screen when it is in standby.
I will continue to use the new one until it finally stops responding completely. This time, I bought insurance. I can keep on taking them back until they acknowledge the problem.
Try to learn from my mistakes. Make them continue to replace the phone until you get one that works.

Control Panel on HP Photosmart Plus e-All-in-One Printer - B210

The touch screen control panel on my HP Photosmart Plus e-All-in-One Printer - B210 has stopped working. I am able to use the Home button and others around the touch screen, but when I touch something on the screen it will not work.
Any suggestions?!

Hi Alloest,
I see that you're having problems with your printer control panel. I would take a look at the document below.
Photosmart B210
Let me know how it goes.

Printer control panel is not responsive.

touch printer control panel is not responsive. The power button is responsive as well as the nfc button. Need help please

Hey , Welcome to the HP Support Forum. I see that your HP ENVY 7640 e-All-in-One Printer's front panel is not functioning. I would like to assist you with this. Have you tried a hard reset? 1. Ensure your printer is powered on.
2. Disconnect the power cord from the rear of the printer.
3. Wait 60 seconds.
4. Reconnect the power cord to the rear of the printer.
5. Press the Power button to turn on the printer (if it doesn't automatically reboot). There are more advanced reset steps available but they're no good to you if the printer won't allow for you to navigate through the touch screen menus. If this basic tip restores front panel functionality let me know and I'll private message you the semi-full reset steps. Otherwise I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Thanks for posting in the HP Support Forum. Have a great day!

TS3274 Touch screen issues

How can I fix some touch screen controls are not working. Also sometimes the space bar is not responding. I've tried power reseting but to no avail. This situation just started yesterday no warning. Is there a utility to adjust touch screen sensitivity?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Then Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Sometimes the screen on my iPhone 3GS appears enlarged, so I cannot see or manipulate the touch screen buttons. Anyone know what this is?

Sometimes the screen on my iPhone 3GS randomly enlarges so I cannot see or manipulate the touch screen controls. Anyone know what causes this?

Double tap with THREE fingers to turn zoom off. Then, go into Settings>General>Accessibility and turn it off for good.

Ios7 Update Problems on iPad 3 - My iPad is not going to black screen after not being touched. Also, am I crazy; I can't find timing adjustment to go to black. Finally, iPad slow to switch between some catgagories in control panel

O.K. I found 3 issues on my iPad 3 after ios update:
1. iPad does not go to black after non-use
2. iPad is slow to switch between some catagories in control panel
3. Speaking of control panel; have I lost my mind? I can't find time adjustment responsible for iPad going to black.

Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Control Panel LCD Screen is too dark.

Is there a way to brighten the LCD screen on the control panel? Thanks.
This question was solved.
View Solution.

Hi @LeftyMike ,
I see that you would like to be able to lighten the LCD screen on the printer. I will do my best to assist you with this issue.
I have checked through the menu structure and wasn't able to find anything for the brightness for the display.
Try tilting the control panel up for viewing, to see if the light shows up.
Touch a button on the display, just to make sure the printer isn't gone into sleep mode.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

G530 Touch sensitive volume control panel

After a quick reformat of my G530, the touch sensitive volume control panel (four black circular buttons in the upper right part above the keyboard) still works but the volume up/down buttons are in slow increments of 2% whereas before blue rectangular sound bars showed up on the screen when pressed and the sound increased by increments of 10%.
Where can I find the drivers for the touch sensitive volume control panel? I've looked everywhere but can't find them.
Any assistance would be greatly appreciated.
Lenovo G530 4446-35U
Conexant High Definition SmartAudio 221
V. 4.55.0.0
Solved!
Go to Solution.

try to re-install power management from here

How can I control external devices using a touch screen with a standalone LabVIEW app

For my senior design project my group and I created a hybrid extended range vehicle with 90 Li+ Batteries thats charged by a 15 kW generator and/or that is also being charged by a 5 kW fuel cell. Currently, our system is capable of measuring voltages off of the batteries and displaying them on a laptop via LabVIEW. To process this data, we are using a cRIO FPGA. What we would like to do now is have a touch screen for the driver to choose what power source charges the batteries as well as monitor a pressure reading coming from the fuel cell tank.
What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls?
Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)?
Do I need an additional license for creating standalone applications and how would i go about creating a standalone app?
sorry for so many question. Any reply helps. Thanks!
Solved!
Go to Solution.

That sounds like a pretty interesting project. If you are interested, National Instruments hosts a Student Design Competition where you can win cash or a trip to Austin for NIWeek.
steve215 wrote:
What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls?
NI does sell Touch Panel computers that can be used to control LabVIEW applications. You can find more information here: HMIs and Industrial Touch Panels and here: LabVIEW Real-Time and Touch Panel Deployment and Replication Resources. Our 6-inch touch panel computers run Windows CE, so programming on them is a little different than programming on a full Windows OS. You may find the Getting Started with the LabVIEW Touch Panel Module useful.
You can use third party devices with the LabVIEW Touch Panel Module, although you will need a deployment license for it. More information can be found in the getting started guide.
If you were able to send the cRIO information over a network (which from your description sounds unlikely), you may be able to use a smartphone to control your application. More information can be found on our Community Smartphone Group.
steve215 wrote:
Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)?
If you were using the 6-inch touch panels, they require 18 to 32 VDC (the fuse becomes an open circuit if input level exceeds 33 VDC). The data transfer from the switching relays can be monitored and changed with the touch panel.
steve215 wrote:
Do I need an additional license for creating standalone applications and how would i go about creating a standalone app?
If you went the touch panel route, you would need to purchase the LabVIEW Touch Panel Module, and a touch panel. The NI touch panels come with a touch panel deployment license. Step-by-step guides for creating the standalone app can be found in the Getting Started with the LabVIEW Touch Panel Module guide.
Regards,
Elizabeth K.
National Instruments | Applications Engineer | www.ni.com/support

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I control an iPad from a touch screen which is mirroring the iPad screen

How can I control an iPad from a touch screen which is mirroring the iPad screen.
This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
There must be a way.?????????? Help!!
Peter Niass
[email protected]

Have a look here
http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

Is there a way to set the control panel in assistive touch?

I have a survivor case on my iPhone 5 and it is difficult to pull up the control panel from the bottom. Is there a way to set the control panel to pop up through assistive touch? If so how?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

Cisco touch screen control panel

Similar Messages

Maybe you are looking for