Cisco Trust Agent - Any way to force the client to always be enabled?

We have begun to roll out dot1x configuration on our fleet of switches to support a basic authentication and posture check for our NAC Framework deployment. Previous to this, we spent a couple of months deploying the Trust Agent. In the time between deploying the client, and turning dot1x on the switch ports, some users have un-checked the "Enable Client" option available to them in the system tray icon, and the Wired Client. Obviously when dot1x is applied to the port, the supplicant forwards the authentication request to the client, and waits forever for a response, leaving users trying to login waiting for 20 - 30 mins for the login process to complete. My question is thus, is there any way (registry setting, config file setting) to force the client to always be enabled?
Thanks,
Michael

Z-index Guide:
http://www.smashingmagazine.com/2009/09/15/the-z-index-css-property-a-comprehensive-look/
Nancy O.

Similar Messages

Is there any way to force the applet to load the file without using cache?

Hi,
I have the applet that renders some data from a file specified as the parameter. The problem is that the user can do something, that changes the input file and reloads the page, but the applet renders old data (from browser cache most probably)
Is there any way to force the applet to load the file without using cache?
Regards,
Zdenek

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Is there any way to force the following initial view...

..."fit to page" + "two pages per screen - but only if there's room for two"?
In other words, I want the page to fit in the screen upon initial view, but I also see a lot of wasted real estate all around that could, most of the time, fit a second page. However, I don't want the two pages to count against the "fit" -- meaning, on narrower screens, the priority should go to fitting the first page (and not showing the 2nd) rather than fit both pages at all costs.
Is there any way to ask Acrobat to do this?

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Any way to disable the bluetooth handset and use enable streaming audio only?

I don't use bluetooth in my car to make or receive phone calls and only use it to stream Pandora. On my previous BBs I was able to disable the handset function and just use streaming audio, but I'm not finding any similar options on the Z10. Does anyone know of a way to do this? Right now I'm just powering off my stereo when I receive a call, but that is not a great solution. Thanks for any feedback.
Solved!
Go to Solution.

Hello rangerdanger and welcome to the BlackBerry Support Community Forums.
Thanks for your question regarding Bluetooth.
The BlackBerry Z10 does not have the option to edit what services are allowed with a Bluetooth connection.
Depending on your vehicle, you may have to access your Bluetooth set up or settings within your car's dash to control what features are enabled with Bluetooth.
If you are unsure how to access these settings, contact your dealership or consult your owners manual.
Cheers!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Is there any way to force the "Save As" dialog to automatically select only the filename, not the filename+extension?

See
https://bugzilla.mozilla.org/show_bug.cgi?id=426680
or more clearly stated here:
https://bugzilla.mozilla.org/show_bug.cgi?id=480522
Two years later this "bug" (not exactly a bug, but a pain in the butt nonetheless) is still not resolved.
Yes, I'm running the latest version of Firefox (6.0.1). And I'm running it on a MacBook Pro running OS 10.6.7.
The selection is made correctly in other applications; this problem is Firefox-specific, and occurs even when no extensions or plug-ins are installed.
Except that when I had my last computer, I found a work-around somewhere that fixed it, but for the life of me I can't recall what kind, how, or where.
Any help with solving this irritating issue would be greatly appreciated.

The initial view (IV) settings within a PDF file are static tags - they can't be made to dynamically-adapt based on the window dimensions,it's the renderer (Acrobat, Reader, or whatever else is opening the file) that decides if and how it will follow the IV requested by the file header.
It would be possible to use a Page Open action on the first page of the file, which does some nasty math with the various doc.*WindowRect objects to work out how much "wasted" space there is, and then set the doc.layout and doc.zoomType properties - but page actions are a different concept to IV as the zoom will reset itself every time that page is viewed. Users don't like their application apparently fiddling with the zoom level without being told to!

Calendar - Any way to set the alert to always on?

Before I updated to iOS7 when I added a new entry in my calendar and set a time for the alert to sound, when it got to that time the alert would sound. After updating to iOS7, I missed several things I had in my calendar the first few days. I noticed the alert was set to none! I had to go in and edit all my calendar entries to have the phone alert me at the time of the event. I didn't see a way that I could just keep that option on. Anybody know of a workaround?

Yes, we do use Apple Remote Desktop. However, we want the other computer to be black the entire time, whether we are accessing it or not. I just don't want the students to see the mouse flying all over the screen and getting distracted, so I just need the screen itself to be black all the time, while still being on.

On a large monitor, the bookmarks toolbar is opening outside of the Firefox window itself - is there any way to force it to stay inside?

Recently I installed Windows 7 on my computer, along with a device called a Triplehead2Go, which spoofs the operating system into thinking that the computer has one monitor attached (when it really has three). When the Firefox window is relatively small on the desktop and with excess space to the right, the bookmarks toolbar opens to the right (and extends outside of the window). This creates a problem for me, as the monitor bezels get in the way of navigation. When the Firefox window is all the way to the right of the desktop, the bookmarks toolbar opens inside of the window (as there is not enough space to the right for it).
Is there any way to force this menu to stay within its boundaries?

The screen dimensions are "right," but I don't want it to use up any more space on-screen than is in the window.

HT5848 Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will forever be trying to sell me on using it. Its fr

Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will forever be trying to sell me on using it. Its free, I know. Still not using it.

Margthecar wrote:
Apple has to stop pretending that their technology is not complicated. It is. Apple has to stop pretending users won’t have problems. They will. Apple needs to train their employees in their own technology.
Awesome post. This is the best description I've seen of what continually makes me angry about Apple. I guess their attitude is, "Whoa, look at all this money! If it ain't broke, why fix it?" And Margthecar the I keep shoveling money into their coffers ....

Disc in drive that Mini will not recognize, will not eject. Is there any way to force eject? The computer says it's empty, but it's not.

I have a disc in the super drive but cannot eject it because the Mini does not recognize that it's there. I've tried the eject button on top of the screen and in the dvd player controls. I wish there was an eject button on the machine. Is there any way to force eject?
Thanks.

RGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S.

Cisco ACS / Trend Micro Office / Cisco Trust Agent

We currently utilize Cisco ACS Server and Trend Micro OfficeScan and would like to deploy Cisco Trust Agent 2.0 on a few laptops. Has anyone been involved with such a deployment? If so, any suggestions, documentation, suggestions?
Thanks,

CTR uses the admin shares to connect to a windows server.
Depending on how you configured it: It will try a nmap fingerprint scan, use static OS mappings or perform a level 2 scan by using the admin shares.
If you are using it through firewalls, the fingerprinting does not work properly.
You will also notice that since version 2.0.3 there hasn't been any new agents developed for it. Also 2.0.5 started to upgrade all port scans etc whereas before it didn't.
I would look to speaking to your cisco account team about the next version of Cisco IPS instead.

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Any way to get the old behavior of "Hyperdraw Other"

In Logic 4.7 one could type ^Command-O to bring up a dialog, then simply type in a controller number and RETURN. That's all you needed to do to hyperdraw any arbitrary controller.
In Logic 7 you type ^Command-O which brings up a long list. No text entry box. You are then forced to use your mouse to scroll waaaay down the list to the controller you want. To add insult to injury you are then forced to use the mouse again to click on the close box to close the window. Yes, this is one of those nifty new-fangled windows without a "CLOSE WINDOW" key command.
Is there any way to replicate the old behavior of Hyperdraw >Other?
I don't want to rant but it seems to me that the speedy interface of logic 4.7 has given way to uber-bloat in logic 7. I hope this isn't the general direction things are going.

Hi K,
⌘ W
Yes, it does close the floating window on my system.
Coming fresh off the transition from 4.7 the distinction is vivid. You may not remember
Probably not, since I made every upgrade along the way, though skipped a lot of V5's primetime.
In my opinion once you start adding up a bunch of "nowhere near as terrible"s and your forced to do them again and again day after day they add up to one big terrible.
Agreed - but some adaption is of course to be expected (at least, IMO). Some is for the better, some is for the worse. Overall, I find the workflow faster with 7 than 4 but again, my memory is not as vivid as yours.
Cheers,
J

Is there any way to force time machine to keep retrying after disk i/o error?

a little background to my problem:
i've had a hard drive problem previously, and i managed get all the data off of my mac by trying and retrying to access the same files and also from my working time machine backup. after zeroing out and reformatting my drive and doing a clean install of Mavericks i had everything back up running no problems.
recently, my macbook pro would be stuck and slow in recently imported iphoto pics so i figured my hard drive is really failing this time around
i try to get a time machine backup to save what i can, but after a couple of tries time machine would just stop backing up and in console i would see a disk i/o error.
is there any way to force time machine to keep trying to backup through the disk i/o error so i can save what i can before getting a new drive?
edit: a little more info, i know i have a harddrive error from looking at the console, but when i do a verify disk in disk utility it comes up clean and even after doing a disk repair it comes up clean i still see disk i/o errors in the console.

See:
*http://kb.mozillazine.org/Preferences_not_saved
Thee can also be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
New files will be created when required.
See "Corrupt extension files":
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

Is there any way to force iPhoto to present faces by folder for identification rather than randomly? Would provide better context for identification especially if a huge number of images is involved.

Before I commit the time and energy required to load and tag faces in 25,000 images within iPhoto, I need some questions answered;
Is there any way to force iPhoto to present faces by folder for tagging rather than randomly? When so many images need tagging, over many years, the context of a folder helps with the identification. The work around is to load the images into iPhoto one folder at a time and do the tagging then.
How do I get iPhoto to present the tagged faces by last name rather than first name? When so many faces will be identified, it is much easier to find people by surname, particularly when I share the library within the family. The work around is to enter names as last name and first name. Being able to toggle the sort is much more desireable.
Is there a way to export a portion of the library including faces? I want to pass on portions of this huge 125 GB library to my family members.
Since my family members will need an Apple computer to view the images and faces, they will likely have their own photo library. So is there any way to combine two libraries and merge the faces?
About 2/3 of my images have been scanned, so the date of creation is the scanned date rather than the date the photo was taken. Will this mess up any sequencing or the retrieval of faces?

If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want. The result is the carved off portion.
You don't need Library Manager to delete the portion you don't want.
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
I believe so.

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

Cisco Trust Agent - Any way to force the client to always be enabled?

Similar Messages

Maybe you are looking for