Cisco UCCX 9.0.2.10000-71 - Demo License Issues
Hello Cisco Support,
I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2.
I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
Below is the information for my setup:
admin:show uccx version
Active UCCX Version: 9.0.2.10000-71
Inactive UCCX Version: NA
admin:show uccx license
Configured Licenses:
Package: Cisco Unified CCX Premium
IVR Port(s): 50
Cisco Unified CCX Premium Seat(s): 25
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Quality Manager Seat(s): 25
Cisco Unified CCX Advanced Quality Manager Seat(s): 25
Cisco Unified CCX Workforce Manager Seat(s): 25
Cisco Unified CCX Compliance Recording Seat(s): 50
Cisco Unified CCX Maximum Agents: 400
Cisco Unified CCX Licensed Outbound IVR Port(s): 25
For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
Command successful.
Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
Warm regards,
JK.
Hello Aman,
Thanks for the link.
How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
Warm regards,
JK.
Similar Messages
-
UCCX 9.x - Problem to upload DEMO License on vmware install
Hi Guys,
I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
Enter a license or zip file name
License File*
Validating uploaded license file...
Warning: No valid license feature lines found in the uploaded license(s).
Validation completed.
The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
The demo license was download from Cisco, and I used the license MAC to generate the license.
Any have Idea about this issues? Where stay the config repository?
Thanks,
WilsonHi Anthony,
Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
Thanks,
Wilson -
Netflow Collector 6.0 demo license
Hi,
It is said in the NetFlow Collector Installation and Configuration Guide that a limited-time demo license can be obtained from Cisco.com
How can i get this demo license?
Regards,
VelinHi,
I think you can obtain that (and more) demo licenses here:
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y.
Good luck!
curtis -
DEMO LICENSE IN UCCX 10.0
Hi,
I tried to use Demo License for UCCX 10.0 which is in installtion Disk but I got the following error:
"The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue."
It's extrange the license names in installation disk are (don't ask me why):
ccx90_enh_demo.lic
ccx90_ivr_demo.lic
ccx90_pre_demo.lic
ccx90_std_demo.lic
I' m running UCCX 10.0.0.95. I already tried to upload Enh and Pre license file. I already removed the license, restarted the server and tried the wizard process again but it didn;t work. I read this post too: https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
Any help would be appreciated.
RegardsCan you get your hands on 10.0.1.10000.24 or later (SU1 is out now I believe as of 2 or 3 weeks ago)..because pre_demo is supposed to be in the same directory.
-
UCCX 8.51 demo license install issue
I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
Thanks,Hi,
License will come into picture when you are performing the UCCX initial app admin setup.
I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
Thanks,
Anand -
Hey avery body
I want to get a demo license for uccx, How I can do ??
Best RegardsDemo licenses are included in the DVD or ISO of UCCX. You can find them in the \DemoLicense\ folder. There are four demo licenses. STD, ENH, PRE, and IPIVR.
If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00 -
AnyConnect for Cisco VPN Phone demo license
I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 750
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5520 VPN Plus license.Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley -
Guys,
Our company is willing to implement Cisco Jabber 9 but they require some sort of demo license to test the functionality of the solution, i have simply no idea about it, so need your help in this regard.
BR.
AbdHello NeyBa -
You can find the numbers of available and used provisioning licenses in TMS by going to:
Administrative Tools > Configuration > General Settings
It's located near the bottom half of the page, just above the installed option keys. -
Uccx demo license disappears after reboot
hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to reupload the demo license, it generates an error. can anyone help me with this?
thanks in advance.What is the exact UCCX version?
If possible, share snapshot of error message.
regds,
aman -
How can I get ACE demo license in cisco?
Hi everyone,
I would like to get ACE demo license..
minimum 50VC and 16G bandwidth to demo on my customer site.
But I can't find the demo license in cisco
Now I use the cisco ACE demo, I can't open service request to get license , due to demo device,
Thank youHI,
To get the ACE demo licenses, contact your Cisco account representative.
As per my knowledge there is no link where you can download the demo license. Or the other way is to contact the cisco licensing team providing your device data.
Regards,
Inayath. -
Demo License key issue in Cisco Content Secuirty managment Virtual appliance
Hi,
I have installed a Cisco content security management appliance for customer evaluation. I have downloaded 45 day demo license key but unable to update the license key neither in GUI nor in CLI. I have referred installation guide and user guide but did not helped at all.
Snapshot from GUIWould suggest to re-copy and paste the XML license - as most likely you have extra white space that is causing the malform when pasting/loading. If using Windows, try avoid using wordpad --- and use Notepad++ or similar.
http://www.cisco.com/c/en/us/support/docs/security/email-security-virtual-appliance/118301-technote-esa-00.html
-Robert -
Does Cisco have any demo license for VCS?
For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron -
Demo License UCCX 8.5(1)
Is there a demo license on the disc? Can someone upload it possibly?
ChadGot a question.
I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
Any help is always appreciated.
Sent from Cisco Technical Support iPhone App -
Mark call as callback in Cisco UCCX outbound
Hi,
I am using Cisco UCCX 10.0. I configured outbound system in uccx and calls are offering to agents.
Anybody please help how a call can be marked as callback in uccx.
Also whether i can update the result of the call; for example: I am running a campaign for credit card. Whether i can update any where that what each customer responded.
Please helpAnybody please help how a call can be marked as callback in uccx.
The agent has a Callback button in CAD while the call is connected to setup the callback. The callback window defined on the campaign will decide how much slack on either side of the desired callback time system will offer that preview call to an agent. Also, the missed call behavior defines what happens if the subsystem cannot find an agent within the window.
Also whether i can update the result of the call
The call result is set to Voice (i.e. customer responded) by default unless an agent Reclassifies the call. Again, this is a button in CAD. The Admin Guide defines what will happen for all of the other result states.
Please remember to rate helpful responses and identify helpful or correct answers. -
Cisco UCCX 9.x Web Chat integration with Siebel
Hi,
I have a requirement to configure and integrate Cisco UCCX 9.x Web chat with Siebel. Do anyone have any good documentation/guides on configuring Web chat on UCCX aswell as integrating it with Siebel?
Thanks
KMSHi,
We have uccx 9.0 with socialminer integrated for webchat.
After the chat is complete,can we send the chat history to the customers email id.
Is this possible?If so can any one advice me how to configure the same.
Thanks,
Rahul
Maybe you are looking for
-
I have usb cord from printer to Mac cannot print anything and says missing plug??? Anyone who can help me? I do not understand what missing plug means?
-
How can we generate PDF file by passing a query from package to RDF?
Hi Everyone, I am beginner as SQL Developer, I am stuck in one issue , that is regarding generating PDF or Excel file according to user parameters passed. Detail of Requirement : I have created one package it contains 2 functions and 1 Procedure . Al
-
I have a Ipod 160gb (late 2009) that im trying to Sync all my music to from my itunes library. Itunes will start the Sync and go for awhile, but then it seems like my ipod ejects itself or something and the sync stop and i get a error one of the erro
-
Just turned on my MacBook and it has a flashing file symbol...Help?
Switched on the MacBook and it has a flashing file symbol with a Question mark. What does this mean the user manual was rubbish...
-
Speech recognition of Address Book help
When you turn on Address Book, in Speech, you can click on configure, and there are only a couple names. Is there a way to expand the list or edit the names? (I don't really care, even if it means to alter system files and stuff)