Cisco UCCX admin page wont display

Hi,
I have setup my CCIE Voice lab at home and running UCCX 7. Everything was working perfectly, but now the appadmin page will not display. Is there a service I need to restart or do I need to reinstall the UCCX.
Thank you

Have your restarted the tomcat service?

Similar Messages

Enable https on Apex application and now the page wont display

Hi,
I enabled https under security, instance on Apex application and now the page wont display. Please help because I wanted to start using https on my url

Hi,
I enabled https under security, instance on Apex application and now the page wont display. Please help because I wanted to start using https on my url

Copy region to page and now page wont display

I copied a region from one page to another page .... now the page I copied the region to wont display ...... get error "page cannot be found ...." the pages that wont display has 2 regions on it ..... anytime I set the copied region to display the page will not render .... if I set only the original region on the page to display it works fine .... but anytime I try to display the copied region, I get the problem .... can anybody tell me why this may be happening ????
thank you for your help

Scott:
I have enclosed some lines from the access and error logs that I think identify the issue ..... the 2 lines on either side of the asterisks (*****) below show the call to app=300 on the one hand and the error on the other .... is there any way from the error id info to determine which page item is causing the problem ???
thank you,
Dave .....
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:07 -0500] "GET /apex/crmprd/f?p=300:15:787230600865394 HTTP/1.1" 200 7398
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:08 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=11792032210424598&p_fname=resdev_logo.jpg HTTP/1.1" 200 39458
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:10 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 5
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:11 -0500] "GET /apex/crmprd/f?p=106:1:41570779015332::NO::: HTTP/1.1" 200 8261
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Starwood_CMYK.jpg HTTP/1.1" 200 20470
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Brand_Horiz_logo.JPG HTTP/1.1" 200 18895
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/f?p=300:21:787230600865394::NO HTTP/1.1" 200 27397
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:13 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=11792032210424598&p_fname=resdev_logo.jpg HTTP/1.1" 200 39458
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:17 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 173
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:18 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 174
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:18 -0500] "GET /apex/crmprd/f?p=106:1:41570779015332::::: HTTP/1.1" 200 8244
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:19 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Starwood_CMYK.jpg HTTP/1.1" 200 20470
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:19 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Brand_Horiz_logo.JPG HTTP/1.1" 200 18895
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:22 -0500] "GET /apex/crmprd/f?p=300:1:787230600865394:NEW:NO:1:: HTTP/1.1" 404 299
[Mon Mar 03 12:24:20 2008] [error] [client 10.29.135.130] [ecid: 1204565058:10.29.0.41:4396:4532:311,0] mod_plsql: /apex/crmprd/f HTTP-404 ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "FLOWS_020200.WWV_FLOW", line 334
ORA-06512: at "FLOWS_020200.WWV_FLOW", line 356
ORA-06512: at "FLOWS_020200.WWV_FLOW_FORMS", line 495
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "FLOWS_020200.F", line 276
ORA-06512: at line 10

Why is my Cisco ER admin page is blank after I place and enter the username and password?

when i enter my username and password in the CER admin login screen my page is blank. Can anyone tell me why? BTW I restarted Cisco Tomcat and my Cisco Emergency Responder will not start.

Version: 10.0.2.10000-11
Yes i did.
the platform page works just fine. It is just when i login with the admin page does not load.I mean it is just a blank white screen.
it should still appear without certificates. I have attached a screen shot

Port forwarding Cisco 857W + admin page viewable externally

I would like to open UDP port 22335, and TCP port 80 on my local server 10.10.10.50. I've been having a heck of a time getting this to work, as I don't really understand access lists and what is required.. also, for some reason my firewall is open to the outside world on port 443 (you can browse and see the admin access page) I don't recally setting this up!! Can someone help me fix all this? Config is as follows:
Thanks a million guys!
CiscoMan
This is the running config of the router: 10.10.10.1
!version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname **************
boot-start-marker
boot system flash c850-advsecurityk9-mz.124-15.T15.bin
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 **************
aaa new-model
aaa session-id common
clock timezone CST -6
clock summer-time CDT recurring
crypto pki trustpoint TP-self-signed-2488767310
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2488767310
revocation-check none
rsakeypair TP-self-signed-2488767310
crypto pki certificate chain TP-self-signed-2488767310
certificate self-signed 01
<cert here>
            quit
dot11 syslog
dot11 ssid ***********
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 ******************
no ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.99
ip dhcp excluded-address 10.10.10.201 10.10.10.254
ip dhcp pool ccp-pool1
   import all
   network 10.10.10.0 255.255.255.0
   dns-server *********
   default-router 10.10.10.1
ip cef
ip inspect log drop-pkt
ip inspect name SDM_MEDIUM appfw SDM_MEDIUM
ip inspect name SDM_MEDIUM cuseeme
ip inspect name SDM_MEDIUM dns
ip inspect name SDM_MEDIUM ftp
ip inspect name SDM_MEDIUM h323
ip inspect name SDM_MEDIUM https
ip inspect name SDM_MEDIUM icmp
ip inspect name SDM_MEDIUM imap reset
ip inspect name SDM_MEDIUM pop3 reset
ip inspect name SDM_MEDIUM rcmd
ip inspect name SDM_MEDIUM realaudio
ip inspect name SDM_MEDIUM rtsp
ip inspect name SDM_MEDIUM esmtp
ip inspect name SDM_MEDIUM sqlnet
ip inspect name SDM_MEDIUM streamworks
ip inspect name SDM_MEDIUM tftp
ip inspect name SDM_MEDIUM tcp router-traffic
ip inspect name SDM_MEDIUM udp
ip inspect name SDM_MEDIUM vdolive
no ip bootp server
ip domain name yourdomain.com
ip name-server *******
ip name-server *******
appfw policy-name SDM_MEDIUM
application im aol
    service default action allow alarm
    service text-chat action allow alarm
    server permit name login.oscar.aol.com
    server permit name toc.oscar.aol.com
    server permit name oam-d09a.blue.aol.com
application im msn
    service default action allow alarm
    service text-chat action allow alarm
    server permit name messenger.hotmail.com
    server permit name gateway.messenger.hotmail.com
    server permit name webmessenger.msn.com
application im yahoo
    service default action allow alarm
    service text-chat action allow alarm
    server permit name scs.msg.yahoo.com
    server permit name scsa.msg.yahoo.com
    server permit name scsb.msg.yahoo.com
    server permit name scsc.msg.yahoo.com
    server permit name scsd.msg.yahoo.com
    server permit name cs16.msg.dcn.yahoo.com
    server permit name cs19.msg.dcn.yahoo.com
    server permit name cs42.msg.dcn.yahoo.com
    server permit name cs53.msg.dcn.yahoo.com
    server permit name cs54.msg.dcn.yahoo.com
    server permit name ads1.vip.scd.yahoo.com
    server permit name radio1.launch.vip.dal.yahoo.com
    server permit name in1.msg.vip.re2.yahoo.com
    server permit name data1.my.vip.sc5.yahoo.com
    server permit name address1.pim.vip.mud.yahoo.com
    server permit name edit.messenger.yahoo.com
    server permit name messenger.yahoo.com
    server permit name http.pager.yahoo.com
    server permit name privacy.yahoo.com
    server permit name csa.yahoo.com
    server permit name csb.yahoo.com
    server permit name csc.yahoo.com
username ********* privilege 15 secret 5 ************************
archive
log config
hidekeys
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
bridge irb
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
no ip redirects
no ip unreachables
no ip proxy-arp
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
shutdown
interface FastEthernet1
interface FastEthernet2
shutdown
interface FastEthernet3
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers aes-ccm
broadcast-key vlan 1 change 30
ssid ********
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
no ip address
bridge-group 1
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 101 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip inspect SDM_MEDIUM out
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username ******** password 7 ********
interface BVI1
description $ES_LAN$$FW_INSIDE$
ip address 10.10.10.1 255.255.255.0
ip access-group 100 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
ip route-cache flow
ip tcp adjust-mss 1412
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
logging trap debugging
access-list 1 remark INSIDE_IF=BVI1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 100 remark auto generated by SDM firewall configuration##NO_ACES_3##
access-list 100 remark SDM_ACL Category=1
access-list 100 deny   ip host 255.255.255.255 any
access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_13##
access-list 101 remark SDM_ACL Category=1
access-list 101 deny   ip 10.10.10.0 0.0.0.255 any
access-list 101 permit udp host ******* eq domain any
access-list 101 permit udp host ******** eq domain any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny   ip 10.0.0.0 0.255.255.255 any
access-list 101 deny   ip 172.16.0.0 0.15.255.255 any
access-list 101 deny   ip 192.168.0.0 0.0.255.255 any
access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
access-list 101 deny   ip host 255.255.255.255 any
access-list 101 deny   ip host 0.0.0.0 any
access-list 101 deny   ip any any log
dialer-list 1 protocol ip permit
control-plane
bridge 1 protocol ieee
bridge 1 route ip
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
privilege level 15
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end

Hi Bro
As mentioned by jcarvaja above, you’ll need to enable PAT (Port Address Translation) simply because you’ve a single WAN IP Address.
Here are the commands that you should insert;
ip nat inside source static tcp 10.10.10.50 80 interface Dialer0 80
ip nat inside source static udp 10.10.10.50 22335 interface Dialer0 22335
ip nat inside source static udp 10.10.10.50 22336 interface Dialer0 22336
ip nat inside source static udp 10.10.10.50 30175 interface Dialer0 30175
ip nat translation timeout 600
ip nat translation tcp-timeout 600
ip nat translation udp-timeout 600
ip nat translation syn-timeout 600
ip nat translation icmp-timeout 600
Moreover, the reason as to why your Router’s admin page is widely expose to the Internet cloud is simply because you’ve enabled the http services.
Here are the commands that you should insert;
no ip http server
no ip http secure-server
P/S: if you think this comment is useful, please do rate them nicely :-) and click on the button THIS QUESTION IS ANSWERED.

Question re Zone Alarm and WRT54G admin page display problem

First - thanks to all who posted about Zone Alarm - I was going to exchange my router this weekend - I spent an hour on the phone with tech support and she was trying to get my router updated with v9 through a roundabout way, but I kept getting an error that said my Flash could not be erased - so she thought the firware on my router was somehow corrupted. But I'm definitely going to check out the Zone Alarm idea first.
My question is - can someone tell me exactly how to disable Zone Alarm? I thought I had done so, but I guess not - I'm not very familiar with Zone Alarm. Also - I had purchased Zone Alarm about a year ago, (was using it with a Linksys wired router) and suddenly I am getting messages on restart telling me my "trial period is up" - of course I can't find my original packaging to enter a serial number (altho one is already entered and they say it's not *valid*) so I have to select an option that tells me I am no longer protected. (unless I pay another $40 to re-register it!!) Could this be part of the problem?
Final question - sorry for being such a newbie - but do I really need both Zone Alarm and the firewall in the router? ZA says it has caught thousands of attempts on my system - while it was running with my non-wireless router installed - is that a crock? Or is actually good to have both software and hardware routers? And if I do need ZA still - does it have to be disabled everytime I want to access the admin page? Then turned back on?
ugh!
thanks -
Mary

LOL - This forum is great, I've been here 5 minutes and now have some fresh perspectives on a couple of problems.
I would NOT recommend paying for ZA. What the heck were they thinking when they created their 'Zones'? They should have named it something else for one, like 'Complicated rules and policies that are guaranteed to hack up everything you try to do (and it gets even worse when you restore the settings you tweaked back to their defaults)' But I guess that's a little too long.
Marynospam: Your Windows firewall (if ur on windows) will do a pretty good job of keeping out unwanted visitors from the Internet. It will NOT stop malware from calling out! Modern day scumbags slip you a trojan that will spy, record, copy, and call them back with whatever they want from you. If you are using Microsoft Windows DO NOT TURN OFF your 3rd party firewall! Of the firewall/security vendors I have experience with, McAfee is the best. I have only used their firewall and viruscan, and don't have experience with their 'spyware' package.

ITS Admin page is not displaying but requesting download

Hi,
I am having a problem with my ITS, basically all the web pages function correctly, except the ITS admin page.
I use the URL, but the response I get back is a dialog asking me to save the web page called !.
After looking at this I think the scripts directory has been altered, and execute permission has been removed. But I am not entirely sure.
Any ideas or comments please reply.
Thanks
Chris aka BoobBoo

the problem is most likely solved by now, but we should follow up on the explanation:
If there is a dialog to save the web page called !.html it could mean a mismatch between WGate configuration information and the web server setup (it looks like you are using IIS).:
To test call service webrfc (/scripts/wgate/webrfc/!):
If that fails, it means:
- the URL that is called is wrong and without WGate Installation
- path SAP-WGate-Scripts is incorrect or missing
If service webrfc works but webgui fails:
- we have seen this issue with double compression turned on (e.g. ITS compression and IIS runtime compression)
- make sure folder IIS Temporary Compressed Files isn't compressed on OS level
=> solution could be to turn of ITS compression: ~http_use_compression=0
best regards
Gerd

WRT54GS Connects to the Internet Not Admin Page

I am able to connect to the internet with the WRT54GS and was able to access the admin page, but now all I get is "Page Can Not Be Displayed". I powered everything off and than turned on the broadband DSL modem, the router and than the PC but still can't get the admin page to load. I am using Windows XP. Can someone please help. Thanks in advance

What is the Ip of your DSL modem? is this the same as your WRT54GS perhaps?
have you setup a proxy cache in your web browsers LAn settings perhaps?
any antivirus/web scanning or firewall utils that are blocking it?
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

Garbage characters in german admin pages after update to 3.0

After Update to 3.0 there are garbage characters display instead of German special characters (äöüß ...)
looking like ... " lÃ¶schen " or "UnterstÃ¼tzende Objekte"
In the applications these characters displayed correctly -even the Buttons ... - only Apex Admin Pages affected.
I have checked Frequently Solved Problems/FAQs with Application Express 3.0
and updated PL/SQL Web Toolkit to 10.1.2.0.6 and checked NLS_charset - is right.Then I've run the load_de Script again. But noting changed.
DB 10.1.0.3 on SLES9 SP3, NLS_CHARACTERSET WE8ISO8859P1
9.0.4 Oracle-HTTP-Server
Any Ideas?
regards
Ralf

and again missunderstood ;-)
begin owa_util.print_cgi_env; end;
=
PLSQL_GATEWAY = WebDb
GATEWAY_IVERSION = 3
SERVER_SOFTWARE = Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server
GATEWAY_INTERFACE = CGI/1.1
SERVER_PORT = 7780
SERVER_NAME = los-bd4.intranet.l-os.de
REQUEST_METHOD = POST
PATH_INFO = /wwv_flow.show
SCRIPT_NAME = /pls/htmldb
REMOTE_ADDR = 10.220.110.200
SERVER_PROTOCOL = HTTP/1.1
REQUEST_PROTOCOL = HTTP
REMOTE_USER = HTMLDB_PUBLIC_USER
HTTP_CONTENT_LENGTH = 297
HTTP_CONTENT_TYPE = application/x-www-form-urlencoded
HTTP_USER_AGENT = Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.8.1.3) Gecko/20070309 Firefox/2.0.0.3
HTTP_HOST = 10.220.110.22:7780
HTTP_ACCEPT = text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
HTTP_ACCEPT_ENCODING = gzip,deflate
HTTP_ACCEPT_LANGUAGE = de-de,de;q=0.8,en;q=0.5,en-us;q=0.3
HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.7
HTTP_REFERER = http://10.220.110.22:7780/pls/htmldb/f?p=4500:1003:2050165973690504::NO:::
HTTP_ORACLE_ECID = 1177512000:10.220.110.22:2296:0:624,0
WEB_AUTHENT_PREFIX =
DAD_NAME = htmldb
DOC_ACCESS_PATH = docs
DOCUMENT_TABLE = wwv_flow_file_objects$
PATH_ALIAS =
REQUEST_CHARSET = AL32UTF8
REQUEST_IANA_CHARSET = UTF-8
SCRIPT_PREFIX = /pls
HTTP_COOKIE = ISCOOKIE=true; ORACLE_PLATFORM_REMEMBER_UN=MERKER:zentral; WWV_FLOW_USER2=5352414403960629
Anweisung wurde verarbeitet.

Pdfs wont display in firefox

Hi,
PDFs on my system work fine. They display in IE no problem.
In adobe reader, I've set the pdf to open in a separate window by unchecking the "display in browser check box"
After no luck with the firefox options Ive downloaded the add-on "pdf-download" and set it to display\open pdfs in a new window, but this still doesn't work - I get "the adobe acrobat reader that is running cannot be used to view pdf files in a web browser...try again"
I had some luck getting this to work by giving the user admin rights, but have failed to find a good consistent solution.
any ideas are much appreciated.
thanks
Dan

I found the solution firefox wont display the image if the image location doesn't start with web application image folder root.
So Instead of C:/Images/image.jpg it should be:
Inside TOMCAT/WebApp/WebApplication it should be:
/images/image.jpg instead.
Message was edited by:
The_Developer

Http 500 internal server error unable to open CCM admin page

When i install CCM 4.1.2 the admin page was opening without having any problems. Eventually CCM admin page is not opening.
=======================================
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the fasi home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
=========================================Any particular reason

Thanks for Reply; the page is https its not opening https://fasi/CCMAdmin/Main.asp
How do i check the proxies?
I can see there is red error icon on IISAdmin.

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

My website wont display right on firefox

Hi my website wont display right on firefox,
website is www.nexu.co.il
in chrome and IE it works very well, only at firefox i have this issue \=
what is the problem

This forum is intended for user support, not for web development issues.
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The contributors over there are more knowledgeable about web page development issues with Firefox.
http://forums.mozillazine.org/viewforum.php?f=25
You'll need to register and login to be able to post in that forum.

Web-Auth Admin Page not loading

I have a WLC 2504 Controller which is set up for guest wireless using the Web-Auth feature / Lobby Ambassador.
When I web browse to the Controller and enter my credentials no page is displayed.
The log file displays the following error:
#CLI-3-LOGIN_FAILED: cliutil.c:632 Login failed. User:lobby-admin, Service type:11. unknown service type.
However when I run a debug aaa events I see the following event that the user passed authentication.
*emWeb: Mar 17 18:54:53.120: Authentication succeeded for lobby-admin
The wireless controller version 7.6.130.0
There is genuinely nothing fancy about the set up and done these loads of times.
I have tried this with Google Chrome, IE and Firefox using both HTTPS and HTTP and it's still exactly the same problem.
Regards
Greg

Which authentication protocol do you want use and does the request from the WLC hit the correct policy on the authentication server?
If you want to use radius as the authentication protocol you need to return the radius "Service-Type" attribute with value "Callback Administrative" for a lobby admin user. If you go with tacacs you need to use role based authentication. For example "role1=ALL" gives the user access to all the tabs in the GUI.

Unable to Access Router Admin Page

So I have a weird situation where my router is working fine to allow me access to the internet, yet I am unable to access the router administration page, 192.168.1.1 This occurred after the router froze up tuesday. I reset the router to factory defaults and have since been able to get online, but not access admin page. Router is a Linksys WRT-54GS V 7
Modem is motorolla SB1505
ISP is earthlink, but in NYC so its actually off the Road Runner network. Cable connection obviously. - I attempted to access 192.168.1.1 with both Mozilla Firefox and IE 8. FIrefox gives an "Unable to connect" error message. IE 8 redirects me to search engine results (yahoo in this case).
-Ipconfig confirms default gateway and DHCP server is 192.168.1.1, subnet mask 255.255.255.0
- I am able to ping the router with <1ms times.
- I have tried resetting router to defaults again, but same issue occurs.
- I am able to get online and access web pages, etc.
- Tried resetting up the router using the Linksys setup program, but it error every time saying "please connect router for broadband"
- Router worked fine with me able to access admin page until it froze up yesterday.
- Wireless works fine. Though the network is unsecure atm, since I can't access router admin.
- I've also tried disconnecting all other devices from the router except my computer and modem. Still wont let me access router. System is running windows 7 PRO, fully updated. However, I can't access the router either on 2 other computers at home which run windows XP PRO SP3. System Specs CPU: Intel i5 running at stock speeds
Mobo: Gigabyte P55-UD4P
Ram: Gskill Ripjaw, 4 gb DDR3-1600 7-7-7-21
HD: Intel X-25 M 80 gb G2.
PSU: Corsair CMPSU 750 TX
GPU: Diamond ATI 5850 Anyone have any ideas on whats wrong here? Did i miss something obvious? Would greatly appreciate any help as having an unsecure wireless network in the middle of NY isn't the best idea. Thanks!
Message Edited by Banthracis on 11-06-2009 04:25 PM

I am once again unable to access the on-line Router admin page. When I use the EasyLink Advisor and click ADVANCED settings it pulls up the browser but goes nowhere. If I type in the address directly it does the same thing. The address I'm typing is correct. I know because if I unplug the router for a minute, I can get on using the EasyLink or entering the address directly into the browser. Then I sign in and can access the pages.
Why do I have to keep resetting the router to access the router admin pages? It doesnt matter about virus protection, firewall, what version of Windows I'm using, what browser I'm using...the only thing that matters is resetting the router.
And now I have a new problem. When I attempt to go online with my new netbook, it causes my wired-to-the-router desktop to loose the connection, even though I reset the router and "added it as a new device".
I was using Homegroup to access the netbook the first day I got it. Now I cannot access the netbook or the network from the netbook, without resetting the stupid router every single time. I am not using mac address filtering and have the router set to allow 9.
Getting fed up with this router and I never get an answer from Linksys as to why I can never access the router admin pages without resetting the stupid router.
I can get the netbook on other people's wireless networks (using their password) but cannot get onto my OWN using my password.
Does anyone have any ideas? I'll try anything before yanking this thing out and buying a different brand of router. Yeah I'm mad, sorry.
Wired desktop Windows 7 Home Premium 64/IE8/using Windows firewall and MS Security Essentials. Netbook is W7 Starter, Norton Internet Security 2010. But none of this matters. Because I had the same problem with this router using Vista64, IE7, no firewall, no a/v, IE32 & 64 bit...all those variables yet the only thing that works is resetting the router.
SO WHAT DOES MATTER? Help me before I trash this thing please.
mlure

Cisco UCCX admin page wont display

Similar Messages

Maybe you are looking for