Cisco UCCX Historical Reports 8.5

No grand total when running an agent summary report   ?
Nearly every other UCCX report has grand total information. Even if I perform a sum/average function to get the totals/averages manually the formula does not work. Because UCCX formats time in a H:MM:SS format all of the time based data starts with a 0. This 0 causes a #DIV/0! error because you can’t run an average on data the starts with 0.
So, we need one of two things to be fixed on this report. Either the grand totals are built into the report (preferred method), or the time format needs to drop the hour if the value of the cell is less than 60 minutes. The work around for this defect is to gather the data from WFM and paste into the report. This might be resolved for the most part as the customized reports are created.  Any suggestion
Thanks

Hi Saeed
I'd agree with your comments. Personally I would incorporate them into the HRC report; I guess if you speak to Cisco about this it would be an 'enhancement request' at best that would take a long time to be resolved.
I've previously 'corrected' some reports like this one to allow proper summarisation etc but it requires some Crystal Reports knowledge & software..
Aaron

Similar Messages

  • Cisco UCCX Historical Reports Printing Issue

    After a new installation of CUCCX Historical Reports 8.5 when the manager tries to print a report it is defaulting to save as a .xps document.  If we select a physical printer in the box it reverts back to the save as .xps document, rinse and repeat.  I've inculded a screen shot, thanks in advance for any assistance.

    Hi Saeed
    I'd agree with your comments. Personally I would incorporate them into the HRC report; I guess if you speak to Cisco about this it would be an 'enhancement request' at best that would take a long time to be resolved.
    I've previously 'corrected' some reports like this one to allow proper summarisation etc but it requires some Crystal Reports knowledge & software..
    Aaron

  • Cisco UCCX Historical Reports

    Application error when trying to execute a query for a single day or short period of a few hours I always get this error.

    Hi Saeed
    I'd agree with your comments. Personally I would incorporate them into the HRC report; I guess if you speak to Cisco about this it would be an 'enhancement request' at best that would take a long time to be resolved.
    I've previously 'corrected' some reports like this one to allow proper summarisation etc but it requires some Crystal Reports knowledge & software..
    Aaron

  • Not able to generate UCCX Historical Report of one agent

    Dear All,
    I am not able to generate the UCCX Historical report of the agent as the Historical reports of the agent is generating upto the Feburary 2013 but we are not able to view the Historical Report of March 2013 and onwards, the realtime reports are generating and the agent name is added to the Active Directory only once, help is required in this regard.
    Best Regards,
    Durraze Khan

    Rajesh,
    Put a breakpoint and try to debug the report step by step.
    You will findout the reason very easily.
    Whenever you have a select and are trying to append into an internal table, keep checking your internal table if it is been populated with the correct records.
    This way, you will findout the cause and can correct is accordingly.
    Thanks,
    Suresh Ganti

  • UCCX Historical Reporting - Transferred Calls

    Hi All,
    I've hit a brick wall in a UCCX script I'm currently working on. My client has requested stats on where agents are transferring calls. It's an operator-type position and it's fairly important to the client that she be able to guage the call volume to particular extensions.
    I've gone through the majority of the standard report templates in UCCX Historical Reporting but haven't found anything suitable. I did notice that the "Agent Call Summary" report states the number of transferred called by a particular agent but not the extension the call were transferred to.
    Any advice would be greatly appreciated!
    As always, thanks in advance.

    What you want is essentially a custom cradle to grave report. I'm sure there are reporting packages that can do this but they are quite spendy.
    You basically want to tie a UCCX session to the CDR records from the CUCM; if you are familiar with SQL that shouldn't be too much of a challenge. The trick is automating it.

  • UCCX historical reporting

    Hi,
    I have one query regarding uccx reporting.
    In uccx suppose any user is configured as UCCX agent and he is not login in CAD, if user gets call in his ACD extension, will that call detail
    be availabe in uccx historical reporting.
    Regards,
    Dinesh Joshi

    Hi.
    This post belongs to the Contact Center session.
    Anyway, what do you mean that the "user is not an available choice"? Does the user have an account in CUCM?
    G.

  • UCCX Historical Reporting Automated Install

    Does anyone have any pointers on how to automate the install for UCCX Historical Reports?  7.01(504)

    Hi Lisa
    1) That report shows the hour period that had the most incoming calls to the whole system. That means all CSQs... what report are you comparing it to? That report may be for a single CSQ that is busy in the afternoon, where the total for the system is higher in the morning.
    2) No, there is not. You would need a custom report to produce this if it is important.
    Regards
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • UCCX Historical Reports client on my pc with two clusters 7x and 9x

    I have two separate clusters, a 7x running UCCX 7x and we are building a new 9.1 cluster running UCCX 9x.
    Can I install the new 9x UCCX Historical Reporting Client and talk to both clusters?  I don’t think both old and new HRC clients can be installed on same pc, or can they?

    Why would you use HRC with version 9.X?  Is CUIC not an option?

  • UCCX Historical Report Chart Time Units

    I'm running a UCCX historical report that charts each agent's logged in time in seconds.  I'd like to make the report's chart as easy to read as possible. Is it possible to change that X-axis unit from seconds to hours instead?
    Thanks!

    You'd have to modify the Crystal Reports file (.rpt) to do logic to change it. Otherwise, no, not that I am aware of.

  • Can Microsoft SSRS or IBM SPSS be used to customize UCCX Historical Reports?

    Hello,
    I have a client with UCCX 8.0 and is interested to know if Microsoft SSRS or IBM SPSS can be used as an alternative of Crystal Report to customize UCCX reports.
    As I have limited knowledge on those products, wondering if someone else can provide some information on this.
    FYI, I posted this on Developers Forum too, still waiting for responses.
    Thanks,
    Kapil

    Hi,
    if you want to keep the Historical Reporting Client provided by Cisco, then I am afraid Crystal is your only option.
    If you don't mind setting up a separate platform, then you can use anything capable of talking to an IBM Informix server.
    G.

  • UCCX Historical Reports Doubt

    Hi ,
    I have telephony setup running on CUCM 9.x integrated with UCCX 9.x.
    Everything working fine and I can generate the Historical reports.
    I have some doubts for generating the reports which is mentioned below.
    1. Need to generate the agents  abandoned calls,Placed calls and missed calls in a single report.I know i can generate these information's in two reports ,but required all this in a single report.Will it is possible?
    2.When generating reports I required only external numbers information not required to show the internal numbers on the reports.Is there anyway I can uncheck the internal number while generating the HR?
    Thanks inn advance
    Nithin Louis.

    Hi Nithinpro,
    Answering your two question, there's not way to custom the information displayed in the HR report type.
    One option to custom report is running Microsoft Silverlight  but is not a easy task.
    Check this link:http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/programming/guide/uccx85hradm.pdf
    Regards

  • Uccx historical reports installer for win7?

    we have a uccx version 8.5 and the installer it has for the historical reports only support windows XP and vista.  i need one for windows 7 but i cannot find it in the cisco download page or maybe i just missed it.  any guidance is much appreciated.  thanks.
    regards,
    ramon

    Hi Ramon,
    The installer for HRC is the same for all Windows OS. This is downloadable from Tools >> Plugins from the CCX Administration Page.
    The support for Windows OS is mentioned in the Compatibility matrix for the CCX in the link below:
    http://tools.cisco.com/squish/f7BAe
    What is your exact version of CCX? Here's the list of Windows OS supported for HR Client with CCX version 8.5 (base) to be run on:
    Win XP Professional
    Win XP Professional SP2
    (Please check Tech Tips & Release Notes)
    Win XP Professional SP3
    (Please check Tech Tips & Release Notes)
    Win Vista (Ultimate and Business)
    Windows 7 (Ultimate)
    Windows 7 x64bit with WoW64(Enterprise)
    Keep in mind, Windows 7 Professional is not listed above. You've to be running the plugin you download on one of the above and it should work fine.
    HTH
    Please rate helpful posts !
    Regards
    Gurpreet

  • UCCX Historical Reports Not Accurately Filtered by Agent Name

    Hello, we're having an odd problem when running our historical reports.  When we filter a report by Agent Name only a couple of agents have any records.  However when we filter the same report by skill or CSQ name the records for all agents are present, leading me to think that the records are not being tagged properly somewhere in the database.  Has anyone seen this before or have any suggestions for resolving this? 
    For an example, if I run the Agent Call Summary report and filter by all of my agent names, I only get records for 3 people during the reporting period.  If I filter based on CSQ name I get records for all 25 agents.
    We are using UCCX version 8.02

    I'm also having agents show in the filter list that are no longer in the system, and in at least one case reports filtered by a skill report an agent who is not assigned to that skill anymore.  Are these symptoms a result of configuration in some way?  I'm starting to feel like the reporting is buggy in this release.

  • Uccx historical report having RNA

    Hi All,
    We have a requirement to pull a report which has to provide the details of the call not answered by the agent(RNA).
    Report must have the following details
    1.Agent Name
    2.Calling Number(CLID)
    This will help us to call back the customer for the unattended calls
    Highly appreciate if some one can help on this...

    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/user/guide/uccx801HRug.pdf
    This link is to the Historical Reports User Guide which provides a detailed decsription of all the available "canned" historical reports in the system.
    If what you need is not here, you can also create custom reports.
    Here is a  link that shows how to do that:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/programming/guide/uccx80hradm.pdf

  • UCCX Historical Report Login Error 5051

    Hi All,
    Have installed the Historical Reporting tool (version 7.0.1.504) to a users' desktop PC and virtual PC, howevwer she receives Error 5051 when trying to logon. I also receive the same error although I have no problems from my own PC. Likewise, the user in question has managed to logon to the application from someone else's PC. The application has been uninstalled and re-installed but to no effect.
    Are there any log files on the server I can check to find the cause of Error 5051?
    Are there any ODBC settings I can check?
    I have multiple users who use the same application from the ame installation with no problems. This is the first instance of this problem.
    Any information greatly appreciated.
    Thanks
    James

    Have you seen this yet?
    http://docwiki.cisco.com/wiki/A_Database_Connection_Error_5051_error_appears
    -Steven

Maybe you are looking for