Cisco UCCX - IPhone Mobile Supervisor Installation

Downloading the IPhone Mobile Supervisor for UCCX. At the registration screen I enter my name, email, & Company. The last field on this same screen displays Unified CCX...., but doesn't state what is supposed to be in this field. I tried turning the phone sideways to see if the rest is displayed and doesn't. Any assistance is greatly appreicated.
Larry

Hi
Not sure if you've resolved this, but you need to add the UCCX version ie 8.0.
Regards
Andy

Similar Messages

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • Mobile Supervisor App iPhone

    Hi,
    Has anyone had any issues with this?
    I have tried this in the lab v7 and live v5 and i get the same result. I can ping the iPhone on the local wifi so i know the connectivity is there. As soon as i put in a valid supervisor account it tells me incorrect credentials. I change the port to test the connectivity and i get the server is not responding as expected. I can log onto the full supervisor desktop on my laptop with the same details immediatly after and i get on fine.
    I know one other UCCX guy who has the same problem but didnt really care about getting it working.
    I logged a call with Cisco and i gave them my MIVR logs for the successful CSD logon then the failed mobile supervisor logon. Looking in the MIVR log i just see bad password.
    Any ideas?
    Regards
    Jon

    Yes, it had to do with the iPhone OS version I was running.  Then Cisco released an update that fixed this issue.  What are your OS and CMS versions?

  • What happened to Cisco Mobile Supervisor? No longer in app store.

    Cisco Mobile Supervisor is no longer in the app store.  Is there a reason?

    Hi,
    no reason. It was killed silently.
    If you take a look at the UCCX comp matrix, for instance, for UCCX 9.0(1), there's the following note:
    Note: The Cisco Mobile Supervisor application is withdrawn from the Cisco App Store. Cisco does not provide support for Cisco Mobile Supervisor deployments.
    A wild theory of mine follows: that application was actually a one-man-show. A toy to be shown on product demos, a piece of art, never understood. I actually liked it, although it was somewhat limited as Aaron has pointed out bellow. I guess the original creator of the application waved goodbye to Cisco plus now that "everything is on the web" (ie. it's easier to create a web application than to maintain a "fat" client) Cisco did not have the reason why they should keep it any longer.
    If there's a CCBU person lurking around here, could you please comment on this.
    G.

  • Cisco Technical Support Mobile App v3.10.1 - New Features

    We are pleased to announce the latest release of the Cisco Technical Support mobile app. 
    What's New in Version 3.10.1:
    • Mobile Push Notifications for Support Cases and generic PSIRT announcements
    • Opt-In to receive Support Case update notifications
    • Expanded "My Shortcuts" section includes bookmarked Bugs and Video Channels
    • Expanded access to Product Lookup - no longer blocked whether the device is not under contract or user lacks entitlement
    • Significant performance improvements loading case notes.  Horizontal swiping support to move directly from one note to the next
    Note: Tapping on a notification will launch the app, and take you to the content in question.
    (View Updated User Guide)
    Complete Feature List:
    Available Features for All Users:
    • Research Cisco products and services through mobile optimized content, videos and podcasts. 
    • Complete access to all our installation and configuration guides, data sheets, command reference guides and more for over 7,000 Cisco products. 
    • Access to over 1,700 troubleshooting guides covering 26 domains; written by TAC, for TAC, and freely available to all our customers.
    • PSIRT Mobile Push Notifications - Tap on the notification to launch the app and view details about the PSIRT
    • Control what notifications you receive from within "Settings"
    • Add bookmarks to your favorite Podcasts, RSS Feeds, and Video Channels for easy access from "My Shortcuts"
    • Integration with Pocket (Read-It-Later) service. Save content to your Pocket account for offline consumption across all of your enabled devices. Go to http://www.getpocket.com/ to learn more about setting up a Pocket account.
    Available Features for Cisco Support Contract Owners:
    Cisco Support Cases & RMAs:
    • View, Edit and Create Support Cases
    • Access to all case notes, attachments (txt, pdf, xls, ppt, doc, and image file types), and related bugs
    • Receive mobile push notifications when a TAC Engineer has been assigned to your case and when your case transitions to a Customer Pending state
    • Opt-In to receive mobile push notifications for any support case you are entitled to access
    • Direct contact (phone & email) with your assigned TAC Engineer, On-Site Contact, and Field Engineer
    • Add bookmarks to Support Cases for easy access from "My Shortcuts"
    • Single tap to request case updates, case closure, and reopen cases
    Cisco Support Contracts & Product Coverage Information: 
    • View basic contract information and set-expiration reminders prior to their expiration
    • Lookup product coverage details by serial number - An embedded bar code is available to make the process easier 
    • Ability to validate and update the current installation using your current location
    Bug Search Tool:
    • Research Cisco software bugs by product, iOS version, or any other keyword using a simplified search utility 
    • Bookmark software bugs for easy access from "My Shortcuts"
    Have questions or want to provide feedback? Send us an email at: [email protected]

    thanks for bringing the Cisco support app.
    it works good and easy to use. thanks you Cisco and Team.
    Potha

  • Problem installing Cisco AnyConnect Secure Mobility Client

    Hello,
    When attempting to install the Cisco AnyConnect Secure Mobility Client, I get the following message: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Well, my support personnel haven't been able to assist. I am attaching the setupapi.dev file I was told could help in troubleshooting. Any help is greatly appreciated!
    Thank you in advance.

    do you have the xml assigned in the group policy on the ASA?  I know the scripting behavior changed between anyconnect 2.5 and 3.1.  AnyConnect 2.5 only required the xml profile locally but 3.1 requires the xml with EnableScripting = true to be assigned to the group policy.

  • Cisco Anyconnect Secure Mobility Client Fails to Install

    I've followed and contributed to posts about this problem here: https://supportforums.cisco.com/thread/2057631                  
    But this problem isn't only isolated to 2.5 client, so I thought a new discussion might attract a bit more attention and feedback.
    For 5 or 6 users when I try to install the client as new as version 3.0.11042 (any version, not just the newest) I get a failure:
    CustomAction VACon64_Install returned actual error code -536870348 (note this may not be 100% accurate if translation happened inside sandbox)
    Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
    MSI (s) (44:94) [16:15:05:629]: Product: Cisco AnyConnect VPN Client -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.  Action VACon64_Install, location: C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\VACon64.exe, command: -install "C:\Program Files (x86)\Cisco\Cisco AnyConnect VPN Client\\vpnva64.inf" VPNVA
    Before it rolls back, I try to run the command manually which appears to do something, but doesn't fix the problem.
    This is the step that is trying to install the service VPNVA, but it fails.
    I have cleaned up all the files I know how (which registry entries might I also try?) and rebooted several times, but no luck.
    The documented Cisco solution, and what i've been telling frustrated users one after another is "re-image your machine"
    Does someone have an idea of what else I can try?

    Thank you.
    The workaround works. Yes, using Windows 8.1.
    An HOW TO on how to set this for everyone who is not that computer savvy...
    1. Go to the Start Screen of Windows 8.1 and look for the Cisco Anyconnect Secure Mobility Client icon (or just type it on the Start Screen).
    2. Right click the icon and select 'Open file location'.
    3. Right click the Cisco Anyconnect Secure Mobility Client (Shortcut) and select 'Properties'
    4. Select the 'Compatibility' Tab.
    5. Check the box 'Run this program in compatibility mode for:' and select 'Windows 8' in the drop down.
    6. Click 'OK' to close the window.
    7. Log off and log on again (or reboot the computer).
    Note to point 5. If there are multiple users are using the PC with different user accounts and they're using the Cisco Secure Mobility Client as well, then go to 'Change settings for all users' and there apply point 5. To do so you'll need administrative rights to the computer though.

  • Unify for Cisco UCCX

    Has anyone worked with Unify for Cisco UCCX? if yes, please provide pro and con on the product. I am checking on outbound campaign dialer options and see what would best fit client's requirements. I have tested outbound on UCCX, but it does not have all the requirements on client's wish list.
    Thanks.
    Dat Pham

    Hi Marco-
    Take a look at the UCCX 9.0.2 Administration Guide under the ASR and TTS in Unified CCX section:
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/configuration/UCCX_Admin_guide_902.pdf
    UCCX Configuration Guides:
    http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-express/products-installation-and-configuration-guides-list.html
    DJ

  • Cisco Anyconnect Secure Mobility Client crashes on Mac 10.8.5

    Hi,
    I have a Macbook Pro with Mountain Lion 10.8.5 OS installed. I am using Cisco Anyconnect Secure Mobility Client as a VPN to access my company's network (Intranet). Had been using this software for more than 2 Months and all of a sudden now when I use this Secure Mobility Client, the application is crashing and I get the following error message:
    Process:         Cisco AnyConnect Secure Mobility Client [1340]
    Path: /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Identifier: com.cisco.vpn
    Version:         3.0.10055
    Code Type:       X86 (Native)
    Parent Process: launchd [152]
    Date/Time: 2013-11-10 11:18:57.739 +0530
    OS Version:      Mac OS X 10.8.5 (12F45)
    Report Version:  10
    Interval Since Last Report:          6277 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Crashed Thread:  6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
    VM Regions Near 0x4:
    --> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
        __TEXT                 0000000000001000-0000000000025000 [  144K] r-x/rwx SM=COW  /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                 0x96fcf7ce mach_msg_trap + 10
    1 libsystem_kernel.dylib                 0x96fcecac mach_msg + 68
    2 com.apple.CoreFoundation         0x990e1f79 __CFRunLoopServiceMachPort + 185
    3 com.apple.CoreFoundation         0x990e795f __CFRunLoopRun + 1247
    4 com.apple.CoreFoundation         0x990e701a CFRunLoopRunSpecific + 378
    5 com.apple.CoreFoundation         0x990e6e8b CFRunLoopRunInMode + 123
    6 com.apple.HIToolbox                   0x97821f5a RunCurrentEventLoopInMode + 242
    7 com.apple.HIToolbox                   0x97821cc9 ReceiveNextEventCommon + 374
    8 com.apple.HIToolbox                   0x97821b44 BlockUntilNextEventMatchingListInMode + 88
    9 com.apple.AppKit                         0x91d9193a _DPSNextEvent + 724
    10 com.apple.AppKit                       0x91d9116c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    11 com.apple.AppKit                       0x91d875cc -[NSApplication run] + 855

    I have identical problem on 10.7.5 OS and AnyConnect 3.1.04074
    Just started happening yesterday.
    Please post if you find a solution.

  • CTRANSPORT_ERROR_TIMEOUT with Cisco AnyConnect Secure Mobility Client 3.1.05170

    Hi,
    I use Cisco AnyConnect Secure Mobility Client 3.1.05170 to connect to my company network and it has been working successfully for a while and until Sunday evening Feb 8.
    Today, this solution is no longer working and I've reproduced the same issue on 3 different Mac's which have 10.10.2 (on 2 Mac's) and 10.9.5 (on 1 Mac).
    I can navigate on internet without any problem but when I launch the connection in Cisco AnyConnect Secure Mobility Client, it time outs and I get the following errors:
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type information sent to the user: Contacting <company server name removed for security reasons>.
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Initiating VPN connection to the secure gateway https://<company server name removed for security reasons>
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 11572 Received connect notification (host <company server name removed for security reasons>, profile myaccess1.xml)
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 718 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29294571 (0xFE410015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 322 Invoked Function: ::getaddrinfo Return Code: 35 (0x00000023) Description: unknown
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 730 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 839 Invoked Function: CHostLocator::resolveHostName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name <company server name removed for security reasons> to IPv6 address
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 913 Host <company server name removed for security reasons> has been resolved to IP address 144.24.19.20
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Writing to hosts file:  144.24.19.20    <company server name removed for security reasons> ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 4893 The requested VPN connection to <company server name removed for security reasons> will target the following IP protocols and addresses: primary - IPv4 (address 144.24.19.20), secondary - N/A.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1939 PasswordEntry username is nwipfli
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 857 Return success from VerifyServerCertificate
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: SendRequest File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1422 Invoked Function: curl_easy_perform Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT 28 : Error
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: sendRequest File: ../../vpn/Api/ConnectIfc.cpp Line: 3191 Invoked Function: CTransport::SendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectIfc.cpp Line: 481 Invoked Function: ConnectIfc::sendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: TranslateStatusCode File: ../../vpn/Api/ConnectIfc.cpp Line: 3008 Invoked Function: TranslateStatusCode Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: doConnectIfcConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1963 Invoked Function: ConnectIfc::connect Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Connection attempt has failed.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2614 Content type (unknown) received. Response type (host unreachable) from <company server name removed for security reasons>:
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Unable to contact <company server name removed for security reasons>.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2724 Unable to contact <company server name removed for security reasons>
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type error sent to the user: Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectMgr.cpp Line: 2050 ConnectMgr::processIfcData failed
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: initiateConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1181 Connection failed.
    Any idea about a solution ?
    Thanks in advance
    Nicolas

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Problems with Cisco AnyConnect Secure Mobility Client 3.1

    Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
    The service does not start correctly anymore. I tried reinstabut no help.
    Could anyone help me please?
    Here my logs.
    Thank you very much.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnva
    Description : Function: CInstaller::PerformAction
    File: .\VACon.cpp
    Line: 522
    Successfully installed service acsock
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpninstall
    Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
    File: .\Xml\XmlLocalACPolMgr.cpp
    Line: 415
    Local Security Policy file already exists and therefore will not be generated
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F84) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F20) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
    Date        : 07/23/2013
    Time        : 08:49:49
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x000016C0) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:10
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F34) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:19
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:20
    Type        : Information
    Source      : acvpnui
    Description : Initializing vpnapi version 3.1.04059 ().
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getCurrentState
    File: .\ClientIfcBase.cpp
    Line: 2058
    API service not ready
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.nam.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: L2Api::attach
    File: .\L2Api.cpp
    Line: 87
    The NAM/L2 Api could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.websecurity.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: SSApi::attach
    File: ..\common\SSApi.cpp
    Line: 51
    The Web Security API could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Error
    Source      : acvpnui
    Description : Function: MFDartBox::getDARTInstallDir
    File: .\MFDartBox.cpp
    Line: 332
    Invoked Function: MsiEnumProductsExW
    Return Code: 259 (0x00000103)
    Description: No more data is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getStats
    File: .\ClientIfcBase.cpp
    Line: 1723
    Called when API service not ready.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CSocketTransport::connectTransport
    File: .\IPC\SocketTransport.cpp
    Line: 981
    Invoked Function: ::WSAConnect
    Return Code: 10061 (0x0000274D)
    Description: No connection could be made because the target machine actively refused it.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::connectIpc
    File: .\IPC\IPCTransport.cpp
    Line: 252
    Invoked Function: CSocketTransport::connectTransport
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::terminateIpcConnection
    File: .\IPC\IPCTransport.cpp
    Line: 404
    Invoked Function: CSocketTransport::writeSocketBlocking
    Return Code: -31588319 (0xFE1E0021)
    Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initIpc
    File: .\ApiIpc.cpp
    Line: 423
    Invoked Function: CIpcTransport::connectIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initiateAgentConnection
    File: .\ApiIpc.cpp
    Line: 336
    Invoked Function: ApiIpc::initIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::run
    File: .\ApiIpc.cpp
    Line: 570
    Invoked Function: ApiIpc::initiateAgentConnection
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ClientIfcBase::attach
    File: .\ClientIfcBase.cpp
    Line: 606
    Client failed to attach.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: CMainFrame::OnCreate
    File: .\mainfrm.cpp
    Line: 342
    Invoked Function: The VPN service is not responding or available.
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Function: ClientIfcBase::detach
    File: .\ClientIfcBase.cpp
    Line: 438
    Shutting down vpnapi
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: ConnectMgr::activateConnectEvent
    File: .\ConnectMgr.cpp
    Line: 1352
    NULL object. Cannot establish a connection at this time.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x0000162C) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkP

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Can anyone help me in iphone mobile, i had lost my data in phone, because i restore my phone without backup, how can i get my old data, i lost my photos and videos... help me

    can anyone help me in iphone mobile, i had lost my data in phone, because i restore my phone without backup, how can i get my old data, i lost my photos and videos... help me

    Sorry Raj,
    If you did not back up your information, and you have now restored your phone, then your information is not recoverable.
    Sorry,
    GB

  • Cisco AnyConnect Secured Mobility Client not saving the VPN url after disconnecting from session/restarting client

    Hello there.
    I am having a problem with Cisco AnyConnect version 3.1.04072. When one of my colleagues disconnects from the VPN session, closes out the program, and then later on, reopens the client, the address that he manually entered did not save and it's defaulting on the two now-defunct VPN servers listed.
    Here's an example to see if it makes more sense:
    -User opens Cisco AnyConnect. By default, there are two selections available on the pulldown:
    SSLVPN.abcdefg.com
    access.abcdefg.ca
    These two VPN servers are now defunct and we use a new VPN server:
    access.abcdefg.com
    The user has to manually type it in. He is now able to connect. However, when disconnected. Regardless if the program is closed or not, it does not save the new VPN server address, rather goes back to the default two VPN servers listed.
    I've checked XML, HTML, registry keys, sys files, dll files to see if I can change the default servers manually. No sign of it.
    I'm hoping that someone out there knows a solution to fix it.
    Thanks in advance!

    Hi Vergel ,
    You can create Anyconnect client profile on ASA. In this profile , you can define the hostname/IP that you wish to connect , along with hostname/IP that should be displayed on the client.
    In the client profile , you can define these parameters - "HostName" and "HostAddress" as "access.abcdefg.com" so that any user , who tries to connects , will see "access.abcdefg.com" as the name displayed in the anyconnect connect field.
    On the client, the xml profile (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) [Win 7] can be seen using those parameters as follows:-
            <HostEntry>
                <HostName>access.abcdefg.com</HostName>
                <HostAddress>access.abcdefg.com</HostAddress>
            </HostEntry>
    Ref:- http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
    Additionally, you can try to delete preferences.xml file to remove the redundant hostnames from the anyconnect connect filed.
    Path for preferences.xml is C:\Users\Cisco\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client (Win 7),
    Hope this helps.
    Regards,
    Dinesh Moudgil
    P.S. Please rate helpful posts.

  • Why do iPhone mobile #'s from contacts come unlinked?

    For the 3rd time in 4 weeks all my contacts that have an iphone number have become deleted from contacts.
    Soooooo, what would cause all my contacts iPhone mobile numbers (categorized as iPhone, not mobile) to disappear, all of them?!?!?!?! I got some back by looking at recent calls, the numbers were there (no names), but not linked to the original contact.
    Thanks, Schooner

    Hey Guys,
    I'm syncing with MobileMe/iMac(3 mos. old) along with iTunes, the way I've been doing for years..... this all started right around the time I downloaded Lion X. I don't use an exchange. It's very random, they're fine for 4 or 5 days and then they just dissappear. Literally, I'll be texting and they're there,then the next time I text it's just phone numbers, no names, and deleted from the specific contacts. Never happens to reagular mobile #'s, just the ones classified as an iPhone #'s
    thanks, Schooner

  • New Features: Cisco Technical Support Mobile App v3.6

    Cisco Technical Support Mobile App v3.6 - New Features:
    On Monday, May 12th, a new version of the Cisco Technical Support mobile application was released with the following new features:
    Aggregated Content For More Than Six Thousand Products
    Select from one of more than six thousand models to access aggregated support documentation, software downloads, and Cisco Support Community content within "Product Information". It is like having your own personal library in the palm of your hand.  
    Pocket Integration
    Send In-App content to your Pocket (Read-It-Later) account for easy, synchronized access across all your devices. As Darren Murph describes on BGR.com, you can further enhance your experience with IFTTT to automate content archival from your Pocket account to several other channels including Evernote, Instapaper, Dropbox, and Box.net. 
    For more Information
    Pocket: http://www.getpocket.com
    IFTTT: http://www.ifttt.com
    IFTTT Pocket Recipes: https://ifttt.com/recipes?channel=pocket#popular​
    Support Contract Expiration Reminders
    With your permission, event reminders can be added to your calendar 90 and 60 days prior to your support contracts expiring. Keeping your contracts up to date ensures non interrupted access to Cisco TAC. 
    And there's more…
    Users with active support contracts can view, update and create support cases, track and initiate RMA Returns, and research software bug information. Stay up to date with the latest offerings from Cisco through several Video, Podcasts and RSS Feeds.
    How to Download the App
    The app can be found by searching for "Cisco Technical Support"in either the iTunes or Google Play App Stores. Direct links to the app are provided below:
    iOS: https://itunes.apple.com/us/app/cisco-technical-support/id398104252?mt=8
    Android: https://play.google.com/store/apps/details?id=com.cisco.swtg_android&hl=en

    Hi Jessica,
    On the iOS mobile app, communities with sub-communities are identified by a blue arrow next to the community.  If you tap on the community name you will be taken to the community, if you tap on the blue arrow you will be taken to the sub-communities within that parent community.  For Android tapping on the arrow next to the community name will expand that community to show any sub-communities underneath it.  I hope this helps.
    Thanks,
    Kent

Maybe you are looking for