Cisco UCS Director Foundation (UCSDF) 5.0 Training

Hello Community,
Can anyone help me where i can attend the following Training for (( Cisco UCS Director Foundation (UCSDF) 5.0 )) as i can not find a schedual in CISCO training locator .. It is highly important for me as i have an implementation soon and i need to get its knowledge .
Thanks & Best Regards ,
Mostafa Elgindy

Mostafa,
I think you'll have a little problem getting this running. There is huge interest in this topic but to be fair, Cisco has only just now (the past two weeks) released the 5.0 course materials to the instructors. So far as I know, me and two other instructors are the only instructors in Europe which are both certified to teach this class as well as actually have hands on experience with Director. In addition, we can't as instructors get our hands on the actual product outside of dCloud to actually update our knowledge for v5.0 because of the insanely stupid terms involved.
I have been asked three times so far to deliver this course. I've said no 3 times. I wouldn't even consider it without a few weeks to prepare, so I personally won't deliver it before March. There are some guys who like reading slides that will do it sooner, but you may have issues with getting questions answered.

Similar Messages

Cisco UCS Director Login Problem

Hello Community,
I have recently installed Cisco UCS Director 5.1. According to the documentation the initial login requirements are admin for username and admin for password, see image;
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/vsphere-install-guide/5-1/b_Installing_UCSDirector_on_vSphere_5_1/b_Installing_UCSDirector_on_vSphere_5_1_chapter_010.html
However, authentication keeps on failing.
Any ideas?
Cheers
Carlton

Sergey,
If this is a real I2C issue, you may still see the same behavior on 2.0.x release if the I2C bus was not cleared before the upgrade. (in this moment I don't know if you recently performed an upgrade on the system or not)
I2C bus tranports information about the different components of the Unified System, this, meaning Chassis, IOMs, Fans, PSU, etc... What happens is that all those components try to send theit status update while other do the same and then the I2C bus gets overwhelmed, and then noone can really report their real status, so we usually recommend the customer ro reseat all major components, one at the time, to clear the bus and then do the upgrade, if that is not done before the upgrade, it still should be done after.
Try reseating the Fans and PSU, one at the time, leaving a minute in between and then, IOMs one at the time, leaving three minutes in between and begining with the subordinate to cause minimun disruption.
If this does not clear the situation, then you will need to remove one of the components already mentioned, one at the time and do a "show tech-support chassis # all brief" to see what the I2C bus reports segment by segment (chassis, Fans, PSUs...) once you remove a component and the errors on each segment stop incrementing you will have your faulty piece of hardware, and a TAC case will be needed to send a replacement.
For further analysis or assistance, I strongly recommend a TAC case to be opened.
-Kenny

Want to hear about vCAC when used with Cisco UCS Director... How are you seeing this done?

I have a client that has both VMware vCloud Automation Center, and Cisco UCS Director.
They wish to constuct a net-new (Greenfield) data center and are hearing from both VMware and Cisco.
I have researched, and found little regarding the merger of the two.
I realize that very likely vCAC is teh "main" management platform, while Cisco UCSD will handle the more "physical hardware" tasks.
REST API's will be leveraged as well.
What have you seen written and done in this space when using BOTH?
Please send me any thoughts or links to relevant data.
I am having a hard time locating good data so that I an advise the client in a good way.

Bahi,
just to illustrate what mess this is, I tested for you on Leopard (10.5) and Snow Leopard (10.6) using the same wide gamut monitor. Here are two screenshots from that experiment. I converted the screenshots from my display profile to sRGB to show you what I see and scaled down 50% (this is a 30" behemoth). First Leopard.
You see they are all the same, but different from the sRGB export you provided. The GB sticker is too blue and the tint on the car is wrong. I doubt anybody but a photographer would notice though.
Next is Snow Leopard:
Here the 320 pixel, the 480 pixel and the 960 pixel image are different from the 720 pixel, the 720p and the 1080p ones. Neither is strictly correct as they are all different from the sRGB display. This is consistent with their being no real color management, just gamma corrections and color space transforms (video is usually not stored as RGB but as YUV, necessitating a transform for display). Annoying, but not much you can do about it.
Just doing some quick googling I came across many mentions of issues such as this. It clearly is just a big mess.

Cisco UCS Director UCS Manager/Central Comparison

Hello Community,
Can someone please tell me what are the fundamental differences between Cisco UCS Director and UCS Manager/Central?
Cheers
Carlton

Carlton,
I am pretty sure this post (3 in total) from Jeremy Waldrop's blog (Jeremy usually visits this community too) will help explain UCS Director: http://jeremywaldrop.wordpress.com/2014/04/01/cisco-ucs-director-part-1/
Besides what you can see in the above link... UCS Manager is usually used for a single domain while UCS Central is used to integrate more than domain into a unique central point...
HTH,
-Kenny

Cisco UCS Director vs Cisco Intelligent Automation for cloud

I am new to cloud automation and private/public cloud solutions, and Im exploring what solutions Cisco has to offer.
What are the differences between these two solutions? What are the different use case scenarios?
I appreciate any feedback, Thanks,

Hello Sandeep,
Follwing are key high point of UCSD or are better than what other vendors are providing.
1) Enable Automation & Self Service through Workflows, Triggers, & Tasks.
2) Lifecycle Management Controls.
3) Automated adaptive provisioning.
4) Multi-tenant Security
5) Single pane of glass for continuous capacity monitoring.
6) Chargeback.
7) Orchestrator & workflow designer.
8 )CloudSense Analytics.
9) Multi-hypervisor support.
10) Multi-cloud support.
Regards,
Shahzad

Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

Hi,
I have an IBM director 6.3.2 on a Windows Server 2008R2
I try to install the MIB for manage Cisco UCS C-460 server.
I downloaded the mib on the cisco ftp.
the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
Ho can I fix this issue...

Hi,
I have an IBM director 6.3.2 on a Windows Server 2008R2
I try to install the MIB for manage Cisco UCS C-460 server.
I downloaded the mib on the cisco ftp.
the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
Ho can I fix this issue...

Looking into UCS. Do I need UCS Director?

Hello Everyone
I am brand new to UCS. I am getting quotes from Cisco on new UCS system. About a year ago we got quotes for this system to add to next years budget and on this quote there is a new item and that is about 10K for UCS support package.
In reading about this it sounded like this was for really large environments.
Our environment is going to be one chassis and 8 blades. 5 of the blades will be used for Hyper V cluster which is managed by SCVMM and orchestrator for automation. In a few years we may look into getting another system for failover site.
Changes on VM environment are not frequent. About 100 VMs
Thanks

In your environment (almost static), UCS Manager (which doesn't require a license, bundled with fabric interconnect) is ok.
UCS Director (the name is misleading) allows automatic provisioning and automation of the infrastructure (Ethernet and Fibrechannel switches, UCS, storage).
In your case with a Windows Hyper-V environment, I would recommend to look into Powershell / Powerscripts. UCS has a library of around 1800 commandlets; its free of charge.
Everything you can do with GUI (UCSM), can be done with PS scripts.
http://www.thomasmaurer.ch/2013/08/manage-your-cisco-ucs-with-windows-powershell/
http://www.thomasmaurer.ch/2013/10/cisco-ucs-powershell-convertto-ucscmdlet/

Can I add my cisco UCS to my cisco prime 2.0?

Hi All
Question
Can I add my Cisco UCS to my Cisco prime 2.0?

Out of the box, PI won't do much with a UCS server other than tell you it replies to a ping.
It's not really designed to manage UCS servers - DCNM and/or UCS Director are the tools for that.
You could load the UCS server SNMP MIBs and setup some custom queries using that but it'd be more trouble than it's worth in my opinion.
Here's a link to the page showing supported devices for PI.

UCS Director API call Help

Hello All,
I am trying to access UCS director API from a webpage to perform GetAllVMs operation but it is throwing Error "401, unauthorized". I believe it has something to do with the Key Value pair I am passing.
Can someone show me an example on how to execute operation by passing key in the request header. I checked the developer's guide but example has not been provided htere.
Apologies in case I posted this under wrong topic/category as I had difficulty browsing this site.

Hi
Please check following link may be useful.
http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-director/products-programming-reference-guides-list.html
Regards,
Shahzad

Windows 2008 R2 on Cisco UCS B200M networking problems

This is driving me completely nuts. Let me start by saying I am new to blade servers and Cisco UCS. I did take an introduction class, and it seemed straight-forward enough. I have a chassis with two B200M blades, on which I am trying to configure two Windows 2008 R2 servers, which I will eventually make Hyper-V servers. This is all in a test environment, so I can do anything I want to on them.
Right now I have installed W2008 directly on hard disks on the B200M hardware.
The problem is this: even though I think I've configured the network hardware correctly, using the Cisco VIC driver software, I cannot get networking to work in any reliable way. I cannot even get ping to work consistantly. I can ping my local server address, but I cannot ping my gateway (HSRP address). When I try, I get a "Reply from 10.100.1.x: Destination host unreachable (x being each particular server's last octet). I CAN, however, ping the individual IP addresses of the core switches. I can also ping some, but not all, the other devices that share the servers' subnet. There are no errors being generated, the arp tables (for those devices I can ping) look good, netstat looks OK. But I cannot get outside the local subnet...
Except when I can.
There are times when I can get all the way out to the Internet, and I can download patches from Microsoft. When it works, it works as expected. But if I reboot the server, oftentimes networking stops working. Yet another reboot can get things going again. This happens even though I've made no changes to either the UCS configs or the OS.
I cannot figure out any reason when it works at some times and not at others. I've made sure I have a native VLAN set, I've tried pinning to specific ports on the Fabric Interconnects. There is just no rhyme or reason to it.
Anyone know of where I can look? I'm very familiar with Windows on stand-alone boxes (although it's no longer my area of expertise), and I manage a global WAN (BGP, OSPF, Nexus 7k, etc.) so I'm no dummy when it comes to networking, but I am utterly stumped on this one.

The problem was this: while the NICs on the blade server are called vNIC0 and vNIC1, Windows was calling vNIC1 "Local Area Connection" and vNIC0 "Local Area Connection 2". So what I configured on UCS did not match what I was configuring in Windows. Completely, utterly ridiculous.
Anyway, networking is working now without any issues. Thanks for you suggestion; it did get me looking in the right direction.

Ask the Expert: Cisco UCS B-Series Latest Version New Features

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco UCS Manager 2.2(1) release, which delivers several important features and major enhancements in the fabric, compute, and operational areas. Some of these features include fabric scaling, VLANs, VIFs, IGMP groups, network endpoints, unidirectional link detection (UDLD) support, support for virtual machine queue (VMQ), direct connect C-Series to FI without FEX, direct KVM access, and several other features.
Teclus Dsouza is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has over 15 years of total IT experience. He has worked across different technologies and a wide range of data center products. He is an expert in Cisco Nexus 1000V and Cisco UCS products. He has more than 6 years of experience on VMware virtualization products.
Chetan Parik is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has seven years of total experience. He has worked on a wide range of Cisco data center products such as Cisco UCS and Cisco Nexus 1000V. He also has five years of experience on VMware virtualization products.
Remember to use the rating system to let Teclus and Chetan know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center community, under subcommunity Unified Computing, shortly after the event. This event lasts through May 9, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Jackson,
Yes its is possible. Connect the storage array to the fabric interconnects using two 10GB links per storage processor. Connect each SP to both fabric interconnects and configure the ports on the fabric interconnect as “Appliance” ports from UCSM
For more information on how to connect Netapp storage using other protocols like iSCSI or FCOE please check the url below.
http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/whitepaper_c11-702584.html
Regards
Teclus Dsouza

Problem on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server.

I've got issue on installing Solaris 10 on Cisco UCS-C24-M3S2 rack server. Solaris 10 doesn't recognize UCSC-RAID-ROM55.

Hi dipaktimsina,
From the documentation below it looks like Solaris doesn't have support for the embedded raid controller with the ROM55 chip.
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
let me know if you have any questions and don't forget to rate any useful answers.

Monitoring Cisco UCS Manager via HP System Information Manager 7.1 (SIM)

I am working with a customer to configure HP System Information Manager 7.1 (SIM) to monitor their Cisco UCS Manager.
The customer is looking to monitor the following:
- CPU Utilization on manager, blades, servers, etc...
- Memory utilization
- Network utilization
- System inventory
Alerting is needed for the following:
- Hardware failures: memory, power supply, drive, etc...
- Predictive failures
- Alert messages
I have the list of all the MIBs provided by Cisco but an having the following issues while loading them into HP SIM.
While loading MIB "CISCO-UNIFIED-COMPUTING-TC-MIB" I get the following error message:
Line 128: Error defining object: expected a label, found reserved symbol {
Line in MIB: SYNTAX Gauge32 {
Guage32 is imported from SNMPv2-SMI MIB
To get past this error I found a version of the MIB that removes all the textual conventions that where causing errors. I have attached the fixed MIB file to this discussion. With the fixed version of the MIB installed in SIM everything compiles and installs except the following two MIBS. CISCO-UNIFIED-COMPUTING-NOTIFS-MIBCISCO-UNIFIED-COMPUTING-CONFORM-MIB Questions:
1. Is there any way to get the CISCO-UNIFIED-COMPUTING-TC-MIB MIB to install correctly into HP SIM?
2. Is my MIB load order setup correctly?
3. Has anyone had success getting HP SIM to monitor and alert for Cisco UCS manager?
MIB Load Order:
SNMPv2-SMI
SNMPv2-TC
SNMP-FRAMEWORK-MIB
RFC1213-MIB
IF-MIB
CISCO-SMI
CISCO-ST-TC
ENTITY-MIB
INET-ADDRESS-MIB
CISCO-UNIFIED-COMPUTING-MIB
CISCO-UNIFIED-COMPUTING-TC-MIB
CISCO-UNIFIED-COMPUTING-FAULT-MIB
CISCO-UNIFIED-COMPUTING-NOTIFS-MIB
CISCO-UNIFIED-COMPUTING-AAA-MIB
CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB
CISCO-UNIFIED-COMPUTING-BIOS-MIB
CISCO-UNIFIED-COMPUTING-BMC-MIB
CISCO-UNIFIED-COMPUTING-CALLHOME-MIB
CISCO-UNIFIED-COMPUTING-CAPABILITY-MIB
CISCO-UNIFIED-COMPUTING-COMM-MIB
CISCO-UNIFIED-COMPUTING-COMPUTE-MIB
CISCO-UNIFIED-COMPUTING-CONFORM-MIB
CISCO-UNIFIED-COMPUTING-DCX-MIB
CISCO-UNIFIED-COMPUTING-DHCP-MIB
CISCO-UNIFIED-COMPUTING-DIAG-MIB
CISCO-UNIFIED-COMPUTING-DPSEC-MIB
CISCO-UNIFIED-COMPUTING-EPQOS-MIB
CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB
CISCO-UNIFIED-COMPUTING-ETHER-MIB
CISCO-UNIFIED-COMPUTING-EVENT-MIB
CISCO-UNIFIED-COMPUTING-EXTMGMT-MIB
CISCO-UNIFIED-COMPUTING-EXTVMM-MIB
CISCO-UNIFIED-COMPUTING-FABRIC-MIB
CISCO-UNIFIED-COMPUTING-FC-MIB
CISCO-UNIFIED-COMPUTING-FCPOOL-MIB
CISCO-UNIFIED-COMPUTING-FIRMWARE-MIB
CISCO-UNIFIED-COMPUTING-FLOWCTRL-MIB
CISCO-UNIFIED-COMPUTING-HOSTIMG-MIB
CISCO-UNIFIED-COMPUTING-IMGPROV-MIB
CISCO-UNIFIED-COMPUTING-IMGSEC-MIB
CISCO-UNIFIED-COMPUTING-IPPOOL-MIB
CISCO-UNIFIED-COMPUTING-IQNPOOL-MIB
CISCO-UNIFIED-COMPUTING-ISCSI-MIB
CISCO-UNIFIED-COMPUTING-LICENSE-MIB
CISCO-UNIFIED-COMPUTING-LLDP-MIB
CISCO-UNIFIED-COMPUTING-LSBOOT-MIB
CISCO-UNIFIED-COMPUTING-LSMAINT-MIB
CISCO-UNIFIED-COMPUTING-LS-MIB
CISCO-UNIFIED-COMPUTING-MACPOOL-MIB
CISCO-UNIFIED-COMPUTING-MAPPINGS-MIB
CISCO-UNIFIED-COMPUTING-MEMORY-MIB
CISCO-UNIFIED-COMPUTING-MGMT-MIB
CISCO-UNIFIED-COMPUTING-NETWORK-MIB
CISCO-UNIFIED-COMPUTING-NWCTRL-MIB
CISCO-UNIFIED-COMPUTING-ORG-MIB
CISCO-UNIFIED-COMPUTING-OS-MIB
CISCO-UNIFIED-COMPUTING-PCI-MIB
CISCO-UNIFIED-COMPUTING-PKI-MIB
CISCO-UNIFIED-COMPUTING-PORT-MIB
CISCO-UNIFIED-COMPUTING-POWER-MIB
CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB
CISCO-UNIFIED-COMPUTING-PROC-MIB
CISCO-UNIFIED-COMPUTING-QOSCLASS-MIB
CISCO-UNIFIED-COMPUTING-SOL-MIB
CISCO-UNIFIED-COMPUTING-STATS-MIB
CISCO-UNIFIED-COMPUTING-STORAGE-MIB
CISCO-UNIFIED-COMPUTING-SW-MIB
CISCO-UNIFIED-COMPUTING-SYSDEBUG-MIB
CISCO-UNIFIED-COMPUTING-SYSFILE-MIB
CISCO-UNIFIED-COMPUTING-TOP-MIB
CISCO-UNIFIED-COMPUTING-TRIG-MIB
CISCO-UNIFIED-COMPUTING-UUIDPOOL-MIB
CISCO-UNIFIED-COMPUTING-VM-MIB
CISCO-UNIFIED-COMPUTING-VNIC-MIB
References:
ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html#_Toc303691433
http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/simsnmp.pdf

Please post "debug ccsip messages".
Based on your debug you are getting "Cause No. 38 - network out of order."
You may want to bind SIP to an interface that the IP address is defined which Lync points to.
Chris

UCS Director 5 Workflow Tasks

Hi,
i cloned the task "OVF Import to VMware Cloud" from task library.
if i use this cloned custom task within a workflow, it doesn't deploy a ovf template.
This is the output from a workflow with the original task
==============================================================
Aug 13, 2014 11:13:05 UTC Request submitted
Aug 13, 2014 11:13:07 UTC Executing workflow item number 1
Aug 13, 2014 11:13:07 UTC Completed workflow item number 1, with status Completed
Aug 13, 2014 11:13:13 UTC Executing workflow item number 2
Aug 13, 2014 11:13:13 UTC Trigger context executeWorkFlowStep called
Aug 13, 2014 11:13:13 UTC Executing custom action custom-ovf-deployment (OVF Import to VMware Cloud)
Aug 13, 2014 11:13:13 UTC Executing custom action custom-ovf-deployment (OVF Import to VMware Cloud)
Aug 13, 2014 11:13:13 UTC Initiating OVF content read from URL : file:/opt/infra/uploads/external/public/1407488922913/demo.ovf
Aug 13, 2014 11:13:13 UTC Policy Trace: Populating cluster/hostnode/datastore list for cloud teamix
Aug 13, 2014 11:13:13 UTC Policy Trace: Final Scope includes Host demoesx01
Aug 13, 2014 11:13:13 UTC Policy Trace: Final Scope includes Host demoesx02
Aug 13, 2014 11:13:14 UTC Policy Trace: After applying PrivateCloudComputingPolicy, scope has 2 hosts
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx01 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789,local_ds_demoesx01,5c3a0165a62d338bbbabb6eef9fed97d,demonfs01_demonap,nfsdemo,demonfs02_demonap
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx02 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789,local_ds_demoesx02,5c3a0165a62d338bbbabb6eef9fed97d,demonfs01_demonap,nfsdemo,demonfs02_demonap
Aug 13, 2014 11:13:14 UTC Policy Trace:
Aug 13, 2014 11:13:14 UTC Policy Trace: Filtering storage scope for system disk type started.
Aug 13, 2014 11:13:14 UTC Policy Trace: Filtering data stores, ruleType=Include
Aug 13, 2014 11:13:14 UTC Policy Trace: Datastores in the include List 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store local_ds_demoesx01, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store 5c3a0165a62d338bbbabb6eef9fed97d, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store demonfs01_demonap, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store nfsdemo, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store demonfs02_demonap, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store local_ds_demoesx02, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store 5c3a0165a62d338bbbabb6eef9fed97d, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store demonfs01_demonap, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store nfsdemo, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Removing Data store demonfs02_demonap, not in the 'Include' list
Aug 13, 2014 11:13:14 UTC Policy Trace: Filtering storage scope for system disk type completed.
Aug 13, 2014 11:13:14 UTC Policy Trace:
Aug 13, 2014 11:13:14 UTC Policy Trace: No additional storage polices defined. Starting datastore filtering for default system type.
Aug 13, 2014 11:13:14 UTC Policy Trace: Completed datastore filtering for default system type.
Aug 13, 2014 11:13:14 UTC Policy Trace: After applying PrivateCloudStoragePolicy, scope has 2 hosts
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx01 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx02 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Policy Trace: No Portgroup name specified in the network policy, so no host filtering done
Aug 13, 2014 11:13:14 UTC Policy Trace: After applying PrivateCloudNetworkPolicy, scope has 2 hosts
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx01 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Policy Trace: Scope now includes host demoesx02 and it's datastores : 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Policy Trace: After evaluating 0 rules, 2 hosts met the criteria
Aug 13, 2014 11:13:14 UTC Policy Trace: Host: demoesx01
Aug 13, 2014 11:13:14 UTC Policy Trace: Host: demoesx02
Aug 13, 2014 11:13:14 UTC Primary Allocated Cluster: ccp-cluster
Aug 13, 2014 11:13:14 UTC Primary Allocated Datastore: 73c42fe99cc535fd96e45ab03bacc789
Aug 13, 2014 11:13:14 UTC Primary Allocated ResourcePool: Resources
Aug 13, 2014 11:13:14 UTC Provisioning on primary host/datastore...
Aug 13, 2014 11:13:14 UTC OVF URL:/opt/infra/uploads/external/public/1407488922913/demo.ovf
Aug 13, 2014 11:13:15 UTC Found data store 73c42fe99cc535fd96e45ab03bacc789 which matched cluster ccp-cluster DC Mordor
Aug 13, 2014 11:13:15 UTC Initiating OVF deployment action.
Aug 13, 2014 11:13:15 UTC Initiating OVF content read from URL : file:/opt/infra/uploads/external/public/1407488922913/demo.ovf
Aug 13, 2014 11:13:17 UTC Initiating VMDK file upload
==============================================================
this is the output from my cloned task:
==============================================================
Aug 13, 2014 11:14:32 UTC Request submitted
Aug 13, 2014 11:14:37 UTC Executing workflow item number 1
Aug 13, 2014 11:14:37 UTC Completed workflow item number 1, with status Completed
Aug 13, 2014 11:14:43 UTC Executing workflow item number 2
Aug 13, 2014 11:14:43 UTC Trigger context executeWorkFlowStep called
Aug 13, 2014 11:14:43 UTC Executing custom action cdot1 (custom_readcDC)
Aug 13, 2014 11:14:43 UTC Executing custom action cdot1 (custom_readcDC)
Aug 13, 2014 11:14:43 UTC Executing custom script for readcDC
Aug 13, 2014 11:14:44 UTC Task #1 (cdot1 (custom_readcDC)) completed successfully in 0 seconds
Aug 13, 2014 11:14:44 UTC Input/Output values for Task #1 (cdot1 (custom_readcDC)):
Aug 13, 2014 11:14:44 UTC [Mapped Input: Select vDC = 2]
Aug 13, 2014 11:14:44 UTC [Mapped Input: OVF File = /opt/infra/uploads/external/public/1407488922913/demo.ovf]
Aug 13, 2014 11:14:44 UTC Completed workflow item number 2, with status Completed
Aug 13, 2014 11:14:49 UTC Executing workflow item number 3
Aug 13, 2014 11:14:49 UTC Completed workflow item number 3, with status Completed
==============================================================
it seems that there is something lost while cloning the task.
Does anybody have an idea what i'm forgot?
regards
Oliver

Hi, in response to your questions:
1. software bug on UCS Director 5.0.0.0 or 5.0.0.1.
I have managed to connect vCenter 5.1 in our environment so don't think it's related to this
2. unsupported vCenter 5.5U2 integration with current / latest UCS Director software
The compatibility matrix mentions 5.5, however it doesn't specify if that includes U2 or not, perhaps you could send a screenshot of the configuration as you have it when trying to complete the addition of the virtual account?
3. no UCS Director pod license. I saw there is no small/medium/ enterise pod licence so this might be an issue.
Not too familiar with the breakdown of the licensing unfortunately as we have a complete license implemented in our environment, although I would expect vCenter licenses to be part of the base licensing model

Cisco UCS Management Pack for System Center Operations Manager 2007 R2 Login Error

I have Cisco UCS 1.4 (3q) and just installed the MP v2.1 for Cisco UCS, however when I click on the "Management Pack Events" alert view in the SCOM console, there are error for event number 19900. The description of the error is as follows:
Description:
CISCO UCS R2 MP (https://10.x.x.x/nuova) [CISCO.UCS.R2.Proxy.LoadCache.ProbeAction.vbs] : CISCO UCS Login Error: Authentication failed (Code: 551)
I noticed that it's looking for the /nuova directory, but in order to login to our UCS environment, we usually just go to the IP address - so I'm wondering if that has something to do with it? I've verified that when going directly to the IP from Internet Explorer I can login using the opsmgr credentials we specifically created for this account. I've also gone through the process of creating a run-as account on the SCOM side and associated it with the correct profiles.
Any help is greatly appreciated.

Troubleshooting has found out its user error, wrong password configured.

Cisco UCS Director Foundation (UCSDF) 5.0 Training

Similar Messages

Maybe you are looking for