Cisco Ucs upgrade from 1.4(3m) to 2.1(1a)

hi!!
I need to do an upgrade from 1.4(3m) to 2.1(1a)!
i've 3 chassis 5108 ( 6 fex 2104xp ) with server B200 M2 and B440 M2. i've two Fi 6120Xp in cluster mode.
i've check the prerequisite to upgrade but i've a question about default zoning;
iv'e brocade switch 5300 ( fw v6.4.1 ) attached to Fi 6120xp
i've SAN configured :
i've no other configuration under San Tab.
The documentation says:
"Default Zoning is Not Supported in Cisco UCS, Release 2.1(1a) Onwards.Default zoning has been deprecated from Cisco UCS, Release 2.1(1a) onwards. Cisco has not supported default zoning in Cisco UCS since Cisco UCS, Release 1.4 in April 2011. All storage connectivity that relies on default zoning in your current configuration will be lost when you upgrade to Cisco UCS, Release 2.1(1a) or a later release. We recommend that you review the Fibre Channel zoning configuration documentation carefully to prepare your migration before you upgrade to Cisco
UCS, Release 2.1(1a) or later."
Can i upgrade to 2.1 (

Similar Messages

Cisco ASA Upgrade from 7.0(8) to 8.2(1)

Hi, i need to upgrade my 5510 ASA from 7.0(8) to 8.2(1) ( Please note its different query from my last thread)
what i found online is i will have to do this upgrade in sequence, that is
7.0.x -> 7.2.x --> 8.0.x --> 8.2.1
is that correct?
or i will go to 7.1.x first? like this
7.0.x--> 7.1.x -> 7.2.x --> 8.0.x --> 8.1.x--> 8.2.1
Please guide, Also i am assuming, reboot required after every upgrade right?

ok, i found something on another Cisco document. that is what i thought
To ensure that your configuration updates correctly, you must upgrade to each major release in turn. Therefore, to upgrade from Version 7.0 to Version 8.2, first upgrade from 7.0 to 7.1, then from 7.1 to 7.2, and finally from Version 7.2 to Version 8.2 (8.1 was only available on the ASA 5580). "

Cisco 1252 upgrade from standalone autonomous to LWAPP

Hi All,
Can somebody please guide me through the process of upgrading Cisco 1252 access point from Autonomous to Light Weight
iam attaching show version log which gives information about current IOS
on the access point & its in standalone mode now.
Any help would be greatly appreciated.
Cheers,
Satish

Hi Satish,
These two great threads discuss the methods to make this conversion;
From Steve, Leo and Charles;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&topicID=.ee6e8b8&fromOutline=true&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2c5c3/0
From Scott and Steve;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&topicID=.ee7c7c3&fromOutline=true&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2fd83/0
Hope this helps!
Rob

UCS Boot from iSCSI fully supported now?

I'm assuming based on Cisco's documentation that boot from iSCSI on UCS blades is now fully supported (as in TAC will provide support for an problems now)? Correct?
Cisco UCS boot from iSCSI
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011101.html#concept_D7BF302366F24CF5A602B0E0BD18787C
Does that cover all versions of ESXi?
Has anybody noted any caveats or issues relating to UCS boot from iSCSI for ESXi?
Just curious as all previous validated design guides from Cisco have been based on FCoE/SAN boot. Would be nice to know its a fully validated
(Cisco. Netapp, Vmware) "Flexpod" implementation .

Ahh.. Just found the new CVD "VMware vSphere Built On FlexPod With IP-Based Shared Storage"
http://www.cisco.com/en/US/docs/unified_computing/ucs/UCS_CVDs/cisco_ucs_vmware_ethernet_flexpod.html
My other question still stands.. has anybody noted any caveats or problems with utilising boot from iSCSI for ESXI?

Upgrade from Cisco 7.1 to 10.5

Hello,
We are planning an upgrade with a customer from Call Manager 7.1 to 10.5, to do this without impact i have a plan in mind. Could you guys check if this is correct, since we will be moving from a MCS to an UCS
- Install UCS in staging Lab (prepare the esxi etc etc)
- Do a backup of the current call manager (7.1)
- Deploy the 7.1 call manager to the new UCS (ISO from cisco website)
- Do a restore to have all the configuration on the staging Lab
- In the staging lab perform the upgrade
I would do this for Call Manager & also Unity, this shouldn't pose any problems?
Kind Regards,
Yannick Vranckx

Hi ,
You can use PCD for migrating from MCS to UCS.
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118318-config-cucm-00.html
regds,
aman

Best Practices for Upgrade UCS firmware from 2.0 to 2.2?

Hi
I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution:
- 1. Upgrading from Release 2.0 with Auto Install -> Step simple but all server reboot at same time.
- 2. Manually Upgrading from Release 2.0. -> Step more complex but can upgrade server one by one.
My question:
- Can I "Upgrade the infrastructure firmware with Auto Intall but upgrade Server with Manual"?
- What is best for my case?
Thanks

Hi Phamcongtuan,
In UCS you can create host firmware policy that can be used to upgrade the firmware of your blades. Once you upgrade the infrastructure firmware, you can apply the host firmware policy to the service profiles of your blades. If you are using service profiles templates you will need to unbind the service profiles and apply the policy to the individual servers.
Host Firmware Package
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/cli/2-2/b_CLI_Firmware_Management_22/b_CLI_Firmware_Management_22_chapter_01000.html#concept_6982A188474A452CBFDBBDD7DD4921F3

What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server)

Hi
What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server) , please let me know the steps to what would be the backup procedures and upgrades.
Regards
Gaurav

I'd suggest reading this guide to make sure you have prepared your environment to support 10.x first. The link below also contains the upgrade path to 10.0(1).
One of the ways you can do this is:
1/ Apply refresh upgrade cop file on all servers in cluster.
2/ Upgrade the cluster to 8.6(2). Take a backup of the cluster.
3/ Build a cluster of 8.6(2) servers on VMs, and assign them the same hostnames and IP address as the hardware cluster. (You may need to keep these on a separate network until switching off the hardware machines)
4/ Restore the backup taken from the hardware cluster on to the VM cluster.
5/ Upgrade VM cluster to 10.0(1).
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100_chapter_010.html#CUCM_RF_UA60AFAB_00

Ask the Expert: Cisco UCS Troubleshooting Boot from SAN with FC and iSCSI

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco UCS Troubleshooting Boot from SAN with FC and iSCSI with Vishal Mehta and Manuel Velasco.
The current industry trend is to use SAN (FC/FCoE/iSCSI) for booting operating systems instead of using local storage.
Boot from SAN offers many benefits, including:
Server without local storage can run cooler and use the extra space for other components.
Redeployment of servers caused by hardware failures becomes easier with boot from SAN servers.
SAN storage allows the administrator to use storage more efficiently.
Boot from SAN offers reliability because the user can access the boot disk through multiple paths, which protects the disk from being a single point of failure.
Cisco UCS takes away much of the complexity with its service profiles and associated boot policies to make boot from SAN deployment an easy task.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past three years with a primary focus on data center technologies such as Cisco Nexus 5000, Cisco UCS, Cisco Nexus 1000v, and virtualization. He has presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past three years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000v, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and VMware VCP and CCNA certifications.
Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center community, under subcommunity Unified Computing, shortly after the event. This event lasts through April 25, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Evan
Thank you for asking this question. Most common TAC cases that we have seen on Boot-from-SAN failures are due to misconfiguration.
So our methodology is to verify configuration and troubleshoot from server to storage switches to storage array.
Before diving into troubleshooting, make sure there is clear understanding of this topology. This is very vital with any troubleshooting scenario. Know what devices you have and how they are connected, how many paths are connected, Switch/NPV mode and so on.
Always try to troubleshoot one path at a time and verify that the setup is in complaint with the SW/HW interop matrix tested by Cisco.
Step 1: Check at server
a. make sure to have uniform firmware version across all components of UCS
b. Verify if VSAN is created and FC uplinks are configured correctly. VSANs/FCoE-vlan should be unique per fabric
c. Verify at service profile level for configuration of vHBAs - vHBA per Fabric should have unique VSAN number
Note down the WWPN of your vhba. This will be needed in step 2 for zoning on the SAN switch and step 3 for LUN masking on the storage array.
d. verify if Boot Policy of the service profile is configured to Boot From SAN - the Boot Order and its parameters such as Lun ID and WWN are extremely important
e. finally at UCS CLI - verify the flogi of vHBAs (for NPV mode, command is (from nxos) – show npv flogi-table)
Step 2: Check at Storage Switch
a. Verify the mode (by default UCS is in FC end-host mode, so storage switch has to be in NPIV mode; unless UCS is in FC Switch mode)
b. Verify the switch port connecting to UCS is UP as an F-Port and is configured for correct VSAN
c. Check if both the initiator (Server) and the target (Storage) are logged into the fabric switch (command for MDS/N5k - show flogi database vsan X)
d. Once confirmed that initiator and target devices are logged into the fabric, query the name server to see if they have registered themselves correctly. (command - show fcns database vsan X)
e. Most important configuration to check on Storage Switch is the zoning
Zoning is basically access control for our initiator to targets. Most common design is to configure one zone per initiator and target.
Zoning will require you to configure a zone, put that zone into your current zonset, then ACTIVATE it. (command - show zoneset active vsan X)
Step 3: Check at Storage Array
When the Storage array logs into the SAN fabric, it queries the name server to see which devices it can communicate.
LUN masking is crucial step on Storage Array which gives particular host (server) access to specific LUN
Assuming that both the storage and initiator have FLOGI’d into the fabric and the zoning is correct (as per Step 1 & 2)
Following needs to be verified at Storage Array level
a. Are the wwpn of the initiators (vhba of the hosts) visible on the storage array?
b. If above is yes then Is LUN Masking applied?
c. What LUN number is presented to the host - this is the number that we see in Lun ID on the 'Boot Order' of Step 1
Below document has details and troubleshooting outputs:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-b-series-blade-servers/115764-ucs-san-tshoot-00.html
Hope this answers your question.
Thanks,
Vishal

Upgrading from cisco LMS 3.0 to a latest version

Hello,
Upgrading from cisco LMS 3.0 to a higher version.
Whatdoes it require?.
What is the current version?
What do we need for upgrading?
Are there specific codes or new need to buy new products?
In case of buying new products, which are the configurations?

H Malik,
You are correct! Latest version is Cisco prime LMS 4.2. There is no direct upgrade from LMS 3.x to LMS 4.x.
The procedure is simple:
Take backup orf old LMS --> Un-install (if same machine)--> Install new LMS --> Restore backup to get old data.
You would need to purchase new license for it.Cisco Prime LMS is now part of the Cisco Prime Infrastructure bundle and is not orderable separately. Cisco Prime Infrastructure bundle follows a size-based incremental licensing model. Device licenses can be combined and added when applied to a single server installation instance. Customers have the option of adding incremental licenses for additional devices as their network grows.Refer to the Cisco Prime Infrastructure Ordering Guide located at http://www.cisco.com/go/primeinfrastructure for the exact part number that matches your requirement and placing the order.
Currently even SmartNet or SAS contracts does not cover major upgrades from LMS 2.x and 3.x; an upgrade part number will need to be purchased to move to Cisco Prime LMS 4.2. These upgrade part numbers reflect a significant discount to protect customers' investment in the Cisco Prime product line.
The data migration process will vary depending on the LMS version from which the data need to be migrated. Migrating data to LMS 4.2:
• LMS 4.2 supports local upgrade or direct inline upgrade only from LMS 4.0.1 and LMS 4.1.
• LMS 4.0 customers are encouraged to install LMS 4.0.1 before doing inline upgrade to LMS 4.2.
• LMS 3.2 and LMS 3.2 Service Pack 1 customers can do a remote upgrade through the LMS backup and restore mechanism.
• LMS 3.1, LMS 3.0, LMS 3.0 December 2007 Update, LMS 2.6, and LMS 2.6 Service Pack 1 customers need to do a remote upgrade to LMS 4.0.1 and then upgrade to LMS 4.2.
-Thanks
Vinod

Upgrade from Cisco Unified CM 4.2 to CUCM 6.0

We are planning an upgrade from CUCM 4.2 to CUCM 6.0 in March, 2009. Is it significantly different? Should I try to get some training classes before upgrade? Or are functions esentially the same?

Hi Mary,
Happy 2009 my friend!
First off, if you can get some training it's always a valuable thing. That being said, functionally, the knowledge that you have gained while working with CUCM 4.x versions will carry across nicely. So you won't be working "in the dark" here. The look and feel is quite different but is not a "show stopper".
If you get some time to play in the "lab" you should be good to go.
Here is one Cisco Press book that is good for CUCM 6.x studies;
Implementing Cisco Unified Communications Manager, Part 1 (CIPT1)
Implementing Cisco Unified Communications Manager, Part 1 (CIPT1), is a CiscoÂ®-authorized, self-paced learning tool for CCVPÂ® foundation learning. This book provides the knowledge necessary to install, configure, and deploy a Cisco Unified Communications solution based on Cisco Unified Communications Manager, the call routing and signaling component of the Cisco Unified Communications solution. By reading this book, you will gain an understanding of deploying a Cisco Unified Communications Manager to support single site, centralized, distributed, and hybrid call processing models.
This book focuses on Cisco Unified Communications Manager Release 6.x. You will learn how to install and configure Cisco Unified Communications Manager, power over Ethernet switches, and gateways using MGCP. You will also learn how to build a scalable dial plan for on-net and off-net calls. The dial plan chapters of the book cover call routing, call coverage, digit manipulation, class of service, and call coverage components. This book will teach you how to implement media resources, LDAP directory integration, and various endpoints including Skinny Client Control Protocol (SCCP) and Session Initiation Protocol (SIP). Cisco Unified Video Advantag endpoint configuration is covered, in addition to, Cisco UnityÂ® voice mail integration and basic voice mail box creation. Various user features are discussed including Presence.
Whether you are preparing for CCVP certification or simply want to gain a better understanding of Cisco Unified Communications Manager fundamentals, you will benefit from the foundation information presented in this book.
https://ciscobookstore.informit.com/bookstore/product.asp?isbn=1587054833
Hope this helps!
Rob

Firmware upgrade from 2.1(3a) to 2.1(3b).

I don't find any documentation on the web for firmware upgrade from 2.1(3a) to 2.1(3b)..
is it wise to follow this link http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.1/b_UpgradingCiscoUCSFrom1.4To2.1.html
Any best practices ?

I would consult
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2.1/b_GUI_Firmware_Management_21.pdf
Cisco UCS B-Series GUI Firmware Management Guide, Release 2.1First Published:
Last Modified: July 12, 2013November 16, 2012

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

Cisco UCS C220 M3S Server OS random shutdowns

Hello good day, I am facing some issues with the Cisco UCS indicated in the subject, I have created a Raid 1 beetwen 2 HDD's of 1 TB each one, also upgraded the firmware of the UCS with the 2.0(3f) HUU tools, and upgraded everything. Then I installed Windows Server 2012 R2 Eval version (I have a proper license to install but wanted to test the OS first). Now some times the OS/Server just shutsdown, and whenever I go in to the Web GUI to check it out, it's actually powered down, I have checked the "Faults and Logs" --> System Event Logs, and I can see this happening:
*The timestamp is from below to the top on both logs*
MAIN_POWER_PRS: Presence sensor, Device Removed / Device Absent was asserted
Microsoft OEM event data record, Record type: DD, Sensor Number: 0A, Event Data: 00 00 00, Raw SEL: 37 01 00 35 0A 00 00 00 00
(About this message with the HEX Values, it's always repeating it self with other values)
System Software event: OS Stop sensor, OS Graceful Shutdown was asserted
In the IMC Log this is what showed when it powered down:
Bridge.c:1484:audit Resp:0x0
Bridge.c:1478:audit from:kcs Fn:0x0 Cmd:0x6 Data: 0x30 0x4
obj/../../src/BiosSecureBootAgent.cc:101:BiosSecureBootAgent --> m_valid_state = [ 0 ] #012 m_enable_state = [ 0 ] #012 m_setupMode_state = [ 1 ] #012 m_secureBoot_state = [ 0 ]
obj/../../src/BiosSecureBootAgent.cc:63:get=uefiSecureBootState Received
bootordermgnt.cpp:2392:WriteBIOSDeviceCfg: Successfully renamed file: /mnt/jffs2/ConfigPolicy.xml.bak to /mnt/jffs2/ConfigPolicy.xml
bootordermgnt.cpp:1310:StoreDeviceCfg: Successfully renamed file: /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT.bak to /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT
bootordermgnt.cpp:2392:WriteBIOSDeviceCfg: Successfully renamed file: /mnt/jffs2/ConfigPolicy.xml.bak to /mnt/jffs2/ConfigPolicy.xml
bootordermgnt.cpp:1310:StoreDeviceCfg: Successfully renamed file: /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT.bak to /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT
bootordermgnt.cpp:2392:WriteBIOSDeviceCfg: Successfully renamed file: /mnt/jffs2/ConfigPolicy.xml.bak to /mnt/jffs2/ConfigPolicy.xml
bootordermgnt.cpp:1310:StoreDeviceCfg: Successfully renamed file: /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT.bak to /mnt/jffs2/avct_ems_cfg/BMC_Data/BOOTDEV.DAT
bootordermgnt.cpp:1367:No Precision Boot DB exists..migrate old relase configuration to Precision Boot format!
sanluis1/platform.c:116:platform_event_enable_tick_end: Configuring IR from CIMC
(A bunch of these with other values) common.c:945:Enabling sensor scan for sensor 0x85.
lv_dimm.c:403:[handle_event_enable_tick]enable sensor event
lv_dimm.c:220:[transition_function]Transition to [High Voltage Mode] Success
lv_dimm.c:200:[transition_function]Starting Transition to [High Voltage Mode] from [Unknown Mode]
(A lot of these with different values) common.c:940:Disabling Sensor scan for sensor 0x89.
lv_dimm.c:129:[lpc_reset_seen]LPC Reset Count is Different [0x15:0x16] Asserted LPC Reset Seen
selparser.c:678: # 1D 03 00 00 01 02 00 00 DB F7 EF 54 20 00 04 25 05 00 00 00 08 00 FF FF # 31d | 02/27/2015 04:51:39 | CIMC | Entity presence MAIN_POWER_PRS #0x05 | Device Absent | Asserted
Received event_ipmi_power_state_change Event (type=4, size=0)
video_trigger.c:262:Sending event_ipmi_power_state_change (OFF) .
WatchdogTimer.c:1467:Current Configuration of Watchdog timer is now stopped.
Pilot2SrvPower.c:466:Blade Power Changed To: [ OFF ]
<5>[se_pilot2_wakeup_interrupt]:2561:USB HS: VDD Power = OFF
<6>drivers/bmc/usb/usb1.1/se_pilot2_udc_usb1_1.c:2540:USB 1.1 is now disconnected.
<5>drivers/bmc/usb/usb1.1/se_pilot2_udc_usb1_1.c:2288:USB FS: VDD Power WAKEUP- Power Good = OFF
<7>[slp_state_isr]:117:Signals SLP3n[ Asserted ] SLP5n[ Asserted ]
<6>[platform_power_state_irq_handler]:18:VDD_PWR_GOOD: Deasserted
In the event viewer of the Windows Server 2012
This is the UCS specifications:
CPU 1: Intel(R) Xeon(R) CPU E5-2609 v2 @ 2.50GHz
CPU2: Intel(R) Xeon(R) CPU E5-2609 v2 @ 2.50GHz
Memory: 16 GB
There is something really itching, is it because I have Evaluation version of the Windows Server...?
Regards.

Ok, I feel kind of dumb now, I have checked the tech evaluation page on Microsoft, and if it's not connected to the internet it will not inherit the three months evaluation trial, which I thought would come activated already, and only allows you up to 10 days grace period with the rearm command .... :/
The process C:\Windows\system32\wlms\wlms.exe (WIN-UDPFG5O0K37) has initiated the shutdown of computer WIN-UDPFG5O0K37 on behalf of user NT AUTHORITY\SYSTEM for the following reason: Other (Planned)
Reason Code: 0x80000000
Shutdown Type: shutdown
Comment: The license period for this installation of Windows has expired. The operating system is shutting down.
This is what made me check it out today, I will connect it to the internet and let it activate... Meanwhile the command for the 10 days grace is:
Slmgr /rearm
Shutdown –r
Like always.

Cisco UCS C220 with VIC 1225

Hello,
We have Cisco UCS C220 M3 with VIC 1225 card installed. We connected only one 10G port of VIC 1225 to Nexus 5548UP switch. But I do not see this port on switch and in CIMI the status for this port shows Link Down. I wanted to to iSCSI boot from storage NetApp FAS2240 but since I don't see this port on my Nexus switch I am unable to do boot from NetApp. I tried both ports on VIC 1225 with same result. Please I need help in this matter. I know I am missing something very simple but can't figure this out.
Thanks,
Salman

Hi Kenny,
Here is the answers:
-What slot is this card installed in?
Mezzenine
-How many CPUs does the server have installed? (1 OR 2 CPUs can make the difference)
2x 2.90 GHz E5-2690/135W 8C/20MB Cache/DDR3 1600MHz
-Is the PCIe slot enabled in BIOS? << Let us know if you don't know how to check it from CIMC
I believe I did. Server>BIOS>BIOS advanced> PCIe (Let me know if this correct)
-Have you confirmed that the cable is good?
I have changed four cables. I am using SFP-H10GB-CU2M= Twinax cable.
-If the switch does not even see the port and CIMC says it is down, have you confirmed the switch port is properly configured?
CIMI says “Link Down” in VIC adapter General area. The switch interface config has only “switchport mode access” in default vlan 1.
-What is the firmware running on the server and the OS?
We upgraded the firmware with latest ucs-c220-huu-1.5.4-3.iso.
Let me share with you the complete BoM of the server:
UCSC-C220-M3S              1x UCS C220 M3 SFF w/o CPU mem HDD PCIe PSU w/ rail kit
UCS-CPU-E5-2690              2x 2.90 GHz E5-2690/135W 8C/20MB Cache/DDR3 1600MHz
UCS-MR-1X082RY-A    16x 8GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v
CAB-9K10A-UK              2x Power Cord 250VAC 10A BS1363 Plug (13 A fuse) UK
UCSC-PCIE-CSC-02    1x           Cisco VIC 1225 Dual Port 10Gb SFP+ CNA
UCSC-PCIE-QSFP              1x Qlogic QLE8242-CU Dual Port 10 GbE FCoE CNA
UCSC-HS-C220M3              2x Heat Sink for UCS C220 M3 Rack Server
UCSC-RAIL1              1x Rail Kit for C220 C22 C24 rack servers

Problem in upgrading from CUCM 8.5.1 to CUCM 8.6.2

Unable to upgarde cucm 8.5 to 8.6 ,
installed referesh upgrade cop file . tried on SFTP and using local DVD same below error displayed . Any one have any solution please share .
Installation Status
File
UCSInstall_UCOS_8.6.2.21900-5.sgn.iso
Start Time
Mon Dec 10 14:31:47 GST 2013
Status
Error encountered: An unknown error occurred while accessing the upgrade file.
12/10/2013 13:44:37 file_list.sh|Starting file_list.sh|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|SFTP command complete (0)|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|List file (pre-filtered):|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) ciscocm.refresh_upgrade_v1.1.cop.sgn|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|/opt/cisco/install/bin/filter file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|No patch type specified. Optional.|<LVL::Debug>
12/10/2013 13:44:38 filter|No upgrade mode specifed. Optional.|<LVL::Debug>
12/10/2013 13:44:43 filter|Processing filter candidate names|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "UCSInstall_UCOS_8.6.2.21900-5.sgn.iso"|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|INorOUT=IN UCSInstall_UCOS_8.6.2.21900-5.sgn.iso: Filter passed.|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "ciscocm.refresh_upgrade_v1.1.cop.sgn"|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern Signed Standard upgrade patch file (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|    Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cmterm-.*\.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (cmterm-.*\.cop\.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter|    Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter|    Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|    Match against cop pattern (ciscocm..*.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter|    Match against cop pattern (ciscocm..*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|INorOUT=IN ciscocm.refresh_upgrade_v1.1.cop.sgn: Filter passed.|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|List file (post-filtered):|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <?xml version="1.0" encoding="UTF-8"?>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE)     <InstallItem type="patch" secure-file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" version="8.6.2.21900-5" file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE)     <InstallItem type="cop" secure-file="ciscocm.refresh_upgrade_v1.1.cop.sgn" version="0.0.0.0-0" file="ciscocm.refresh_upgrade_v1.1.cop" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|success|<LVL::Info>
12/10/2013 13:44:45 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Get //UCSInstall_UCOS_8.6.2.21900-5.sgn.iso size via sftp|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Size of file obtained from sftp is 4793341952|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Total space needed is 9586683904|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Check free space|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE)   Free space : 25916985344|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Space needed : 19827077120|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Remote SFTP request complete (0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|success|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|Unmount DVD|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:45:08 upgrade_get_file.sh|source_dir=/, dest_file=/common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Starting SFTP|<LVL::Debug>
12/10/2013 14:29:34 upgrade_get_file.sh|Mount /common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso on /mnt/source|<LVL::Info>
12/10/2013 14:29:34 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
12/10/2013 14:29:34 upgrade_get_file.sh|Create md5 "/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso.md5"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|MD5(/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso)= e8:da:df:9a:3a:61:ee:27:4d:c5:4f:7b:77:78:bc:f1|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|Authenticate file "/common/download/8.6.2.21900-5/checksum_file.sgn"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|authenticating ISO name, filename=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, isoname=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
12/10/2013 14:30:49 upgrade_get_file.sh|Checking for preflight script|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Executing preflight script: /mnt/source/Cisco/install/bin/preflight isolocation=/mnt/source|<LVL::Info>
12/10/2013 14:30:49 preflight|Starting preflight|<LVL::Info>
12/10/2013 14:30:49 preflight|Validate preflight data|<LVL::Info>
12/10/2013 14:30:49 preflight|Preflight data validation complete|<LVL::Info>
12/10/2013 14:30:49 preflight|Determine upgrade type|<LVL::Info>
12/10/2013 14:30:50 preflight|Active RH version = 4AS|<LVL::Debug>
12/10/2013 14:30:50 preflight|New os version(xml) = 5Server|<LVL::Debug>
12/10/2013 14:30:50 preflight|HW model = VMware|<LVL::Debug>
12/10/2013 14:30:50 preflight|Upgrade type = RU|<LVL::Debug>
12/10/2013 14:30:50 preflight|Obtain product type|<LVL::Info>
12/10/2013 14:30:53 preflight|Obtained product type CallManager|<LVL::Info>
12/10/2013 14:30:53 preflight|Processing preflight install mode|<LVL::Info>
12/10/2013 14:30:53 preflight|Set preflight cancel utility|<LVL::Info>
12/10/2013 14:30:53 preflight|Execute install preflight commands for CallManager:RU from /mnt/source/Cisco/install/preflight.xml|<LVL::Info>
12/10/2013 14:30:53 preflight|Found 10 preflight commands to execute|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (1/10): mkdir -p /common/preflight/CM/RU|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (2/10): cp -f /usr/local/platform/conf/dynamicConfig.xml /common/preflight/CM/RU/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/platform/conf/dynamicConfig.xml': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (3/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp /common/preflight/CM/RU/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (4/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp /common/preflight/CM/RU/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (5/10): cp -f /mnt/source/Cisco/install/dynamicConfig_RU.xml /usr/local/platform/conf/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (6/10): mkdir -p /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (7/10): cp -f /mnt/source/Cisco/install/dynamic_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (8/10): cp -f /mnt/source/Cisco/install/install-confirm-content_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (9/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/dynamic_RU.jsp dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Source dir/file = /mnt/source/Cisco/install/dynamic_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Destination file name = dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Execute preflight command (10/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/install-confirm-content_RU.jsp install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Source dir/file = /mnt/source/Cisco/install/install-confirm-content_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Destination file name = install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Exiting with result 0|<LVL::Info>
12/10/2013 14:30:54 upgrade_get_file.sh|preflight rc=0|<LVL::Debug>
12/10/2013 14:30:54 upgrade_get_file.sh|Preflight completed successfully|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|success|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes done
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling inactive side processes
12/30/2014 14:31:50 sd_cancelInstall.sh|Canceling inactive side processes done
12/10/2013 14:31:55 upgrade_install.sh|Starting Upgrade -- upgrade_install.sh|<LVL::Info>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/usr/local/platform/bin/startcsa status|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|(CAPTURE) Cisco Security Agent is running with pid 23124|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/etc/init.d/ciscosec stop|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|(CAPTURE) Stopping ciscosec: [ OK ]|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|Upgrade the system|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Start upgrade manager|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|/common/download/8.6.2.21900-5/upgrade_manager.sh type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Cleanup data from a prior upgrade attempt|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /grub/boot/grub/grub.conf.recovery|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate upgrade partition|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Clean up rpm any stale __db. files in rpmdb on the to side|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any master RPM from /partB|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /partB/etc/opt/cisco/install.conf|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate any product configuration file|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|upgrade_type="upgrade"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|L2 upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Calling "source /mnt/source/Cisco/install/bin/install_func"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check for Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check if /mnt/source/upgradeConfig.xml exists|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Checking RedHat release version (4AS, 5Server)|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initiate Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Copy /mnt/source/Cisco/install/bin/refresh_upgrade to /common/download/8.6.2.21900-5/refresh_upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Check that /common/download/8.6.2.21900-5/refresh_upgrade exists and is executable|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Calling exec /common/download/8.6.2.21900-5/refresh_upgrade type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|No 'to' version specified. Extracting it from base path.|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|NEW_VERSION updated to 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Refresh Upgrade Starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|IOWAIT monitor starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Checksum the upgrade source on /mnt/source|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Calling sha1sum -c /common/download/8.6.2.21900-5/checksum_file|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Checksum complete|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize staging area|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize globals for hard drive|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Calling rm -rf /common/refresh_upgrade /common/component|<LVL::Debug>
12/10/2013 14:34:23 refresh_upgrade|Copy /mnt/source to /common/refresh_upgrade|<LVL::Info>
12/10/2013 14:34:23 refresh_upgrade|Execute find /mnt/source and cpio to /common/refresh_upgrade. This may take several minutes.|<LVL::Debug>
12/10/2013 14:37:31 refresh_upgrade|Copy source files to staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Initialize staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Prepare Refresh Upgrade support directory|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Make /common/mnt/product_img mount point|<LVL::Info>
12/10/2013 14:37:32 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup support directories|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling mkdir -p /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Create /common/cisco link to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/download/8.6.2.21900-5/Cisco /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Copy files from /common/refresh_upgrade/images/product.img to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling mount /common/refresh_upgrade/images/product.img /common/mnt/product_img -o loop|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/iproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/iproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihardware.sh /common/download/8.6.2.21900-5/Cisco/bin/ihardware.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihistory.sh /common/download/8.6.2.21900-5/Cisco/bin/ihistory.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/xproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xcomponent.sh /common/download/8.6.2.21900-5/Cisco/bin/xcomponent.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xplatformconfig.sh /common/download/8.6.2.21900-5/Cisco/bin/xplatformconfig.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/install_emailer /common/download/8.6.2.21900-5/Cisco/bin/install_emailer|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/component_install /common/download/8.6.2.21900-5/Cisco/bin/component_install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup install information in /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/refresh_upgrade/Cisco/install /common/download/8.6.2.21900-5/Cisco/install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Setting up cisco specific enviroment|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|PATH=/common/download/8.6.2.21900-5/Cisco/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/home/sftpuser:/root/.security|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|LD_LIBRARY_PATH=/common/download/8.6.2.21900-5/Cisco/lib:/opt/cisco/install/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|PYTHONPATH=/common/download/8.6.2.21900-5/Cisco/python:/usr/local/cm/lib:/usr/local/cm/lib:/usr/local/cm/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_CONF_PATH=/common/download/8.6.2.21900-5/Cisco/install/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_BIN_PATH=/common/download/8.6.2.21900-5/Cisco/bin /opt/cisco/install/bin /usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_PLATFORMCONF_PATH=/common/cisco /usr/local/platform/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_LIB_PATH=/usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Set logging globals for upgrade|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Before: ILOG_CONTEXT="Upgrade", ILOG_FILE="/var/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/var/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|After: ILOG_CONTEXT="Upgrade", ILOG_FILE="/common/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/common/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Initialize APIs|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Initializing the product API|<LVL::Info>
12/10/2013 14:37:37 refresh_upgrade|Initializing the hardware API|<LVL::Info>
12/10/2013 14:37:38 ServerApiManager|INITIALIZE: sam_legacy_mode_init=1|<LVL::Debug>
12/10/2013 14:37:46 ServerApiManager|INITIALIZE: sam_hssi_mode_init=0|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initializing the history log API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xplatformconfig API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xproduct API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "source /common/download/8.6.2.21900-5/Cisco/install/setup/utils.sh"|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions complete|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Getting deployment ID from active side|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Copy /usr/local/platform/conf/platformConfig.xml to /common/cisco/platformConfig.xml|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "cp /usr/local/platform/conf/platformConfig.xml /common/cisco/platformConfig.xml"|<LVL::Debug>
12/10/2013 14:37:48 refresh_upgrade|Check if the upgrade is allowed|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Validate hardware for the upgrade|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Hardware is supported for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate hardware for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Hardware is supported for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate from version 8.5.1.10000-26|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Upgrade from 8.5.1.10000-26 allowed|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate free space for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|(CAPTURE) Free space: 26040668160, Needed space: 15014745300|<LVL::Debug>
12/10/2013 14:37:50 refresh_upgrade|Free space validation complete|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Run component export scripts|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xproduct.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xcomponent.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xplatformconfig.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument export|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument mode=refresh-upgrade|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument install_root=/common/refresh_upgrade/Cisco|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument data_root=/common|<LVL::Debug>
12/10/2013 14:37:50 component_install|Run component export scripts, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "to" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "to" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "from" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "from" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize ucos "to" side version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucos available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucos|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucos export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucos export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Building the command list for ucos is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTStart|<LVL::Notice>
12/10/2013 14:37:51 component_install|Execute commands in the command list for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|No commands to execute for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:51 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucplatform available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucplatform|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucplatform export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Add "security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Building the command list for ucplatform is complete|<LVL::Info>
12/10/2013 14:37:52 component_install|Command execution for ucplatform component RTMTStart|<LVL::Notice>
12/10/2013 14:37:52 component_install|Execute commands in the command list for ucplatform component|<LVL::Info>
12/10/2013 14:37:52 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:52 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare|<LVL::Debug>
12/10/2013 14:37:52 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Parse arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Validate arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Initialize global variables|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Handle Security Information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export security information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export /etc/shadow file|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export login warning message|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export SFTP data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export DRF data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export CCM Service Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export IPSec Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|get_fips_status returning partB fips_cnf as 0|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Racoon Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Tomcat Data|<LVL::Debug>
12/10/2013 14:37:53 security_prepare|security information prepare successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Handle password information|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Export password information|<LVL::Info>
12/10/2013 14:37:53 password_migrate|Calling mkdir -p /common/component/ucplatform/etc/pam.d|<LVL::Info>
12/10/2013 14:37:53 password_migrate|password information migrate successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 platform_certs_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export platform certificates|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|exporting certmon config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform/config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|copy /usr/local/platform/conf/certMonitorConfig.xml /common/component/ucplatform/conf/|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export bulk sftp config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|sftp config not available|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|platform certificates migrate successful|<LVL::Info>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 servm_export|Start servm Export processing|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/activate.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/services.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|SUCCESS: servm Export processing completed|<LVL::Info>
12/10/2013 14:37:56 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:56 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate|<LVL::Debug>
12/10/2013 14:37:56 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Export network configuration files to /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/common|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copy network configuration files|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network-scripts/ifcfg-eth0 to /common/component/ucplatform/etc/sysconfig/network-scripts/ifcfg-eth0|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network to /common/component/ucplatform/etc/sysconfig/network|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/hosts to /common/component/ucplatform/etc/hosts|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying /etc/resolv.conf to /common/component/ucplatform/etc/resolv.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying //etc/nsswitch.conf to /common/component/ucplatform/etc/nsswitch.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copy network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 network_files_migrate|Export network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:57 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Component ucplatform_cluster available on active side|<LVL::Debug>
12/10/2013 14:37:57 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Build the command list for ucplatform_cluster|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Build ucplatform_cluster export phase commands|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster export element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster script element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Add "platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Building the command list for ucplatform_cluster is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform_cluster component RTMTStart|<LVL::Notice>
12/10/2013 14:37:57 component_install|Execute commands in the command list for ucplatform_cluster component|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:58 platform_sso_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component thirdparty available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for thirdparty|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build thirdparty export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing thirdparty export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for thirdparty is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component serviceability_core available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for serviceability_core|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build serviceability_core export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing serviceability_core export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for serviceability_core is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component database available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>

hi gupta ,
admin:run sql car select * from tbl_event_log
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDr                                                 iver;)
admin:run sql car select * from tbl_system_preferences
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDriver;)
restarted the below sevices
Cisco CDR Agent
Cisco Database Layer Monitor
Cisco CDR Repository Manager
Cisco CAR                 Scheduler
Cisco SOAP - CDRonDemand                 Service
Cisco CAR Web                 Service
while accessing cdr reporting showing below error .
------------------------------------------WARNING-----------------------------------------
* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page for Call Manager service.
* Problem in determining 2M/HWM breach status. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Tbl_System_Preferences table is corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Problem in determining Loader Configuration. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
-------------------------------------------NOTICE------------------------------------------
* Problem in determining Billing Tables status. Please check the CAR DB for tables Tbl_Billing_Data and Tbl_Billing_Error.
* Problem in getting the Mail parameters. It might result in   mails/alerts/notifications not been sent to CAR Administrators. Please   configure this at CAR->System->System Parameters->Mail   Parameters.
* Mail id for 'ccmadmin' is not available. CAR Reports/Notifications/Alert Emails might not be able to sent to this user properly. Please configure a mail id in end user configuration page.
if we apllied Restore Defaults ,geting below error
Error Code
Error Description
30029
Direct access to this screen is not allowed.
and try to access system and data base , getting below error
Error Code
Error Description
10012
Database Error. Contact System Administrator.
Does any other way to avoid cdr and do the istallation .

Cisco Ucs upgrade from 1.4(3m) to 2.1(1a)

Similar Messages

Maybe you are looking for