Cisco Unified Attendant Console Upgrade

All - I currently have CUEAC 8.6.1, and I am looking to get to 10.0.1.
Can I upgrade to CUEAC 9.1.1, and then upgrade to 10.0.1?
I found a document that stated I can do upgrade migration from 9.1.1 to 10.0.1, but couldnt find any specific details.
Any help would be appreciated!
Thanks,
Jaime

Hi Jaime,
Please check page 3 of the following doc
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/10_0_1/release_notes/Cisco_Unified_Attendant_Console_Advanced_Release_Notes_10-0-1-10.pdf
You can upgrade from 8.6.2 to 10.0. directly as well as 8.6.2 to 9.1 and then to 10.0.
HTH
Manish

Similar Messages

  • Cisco unified Attendant Console reports

    Hi,
    We have a customer with Cisco Unified Enterprise Attendant Console 8.5.1.5 interested in operator reports. They have more than one operator per queue. There is a report with attended operator calls but no abandoned. Is there any way to get the abandoned calls by operator (not by queue)?
    Thanks in advance
    Laura

    Hi Laura,
    As the calls route through the queues this where calls are abandoned, calls are not routed directly to the operators phone hence why there is no report for this against a user.
    Jamie

  • Cisco Unified Attendant Consoles for Be6000

    Hi
    I would like to know if there is limitation in teh directory sync from Cucm, ex, do the user need to have a directory number to be synced.
    I have a setup and right now I have about 100 users but only 2 users have a directory number and these are the only 2 users I can see in attendant console, but in Cucm users I can see all the suers.
    Regards Bjørn                  

    Bjorn,
    It depends on the CUAC Edtion and the source you are using.
    If you are using Departmenr, Business or Enterprise Edition then the sync is done with the CUCM and therefore the telephone number field against End Users must be populated in order for the contact to be seen in the CUAC directory.
    This is the same for Premium Edition if syncing with CUCM but you can also sync directly with AD, in this case the telephone number field or IP Phone field (or whatever field you are using to pull through the contact number) must be populated.
    I agree with your point about there being a use case for people in the directory without a telephone number, I will raise this with the product team and request an enhancement.
    Jamie

  • CUAC 10 Advanced / Unified Attendant Console silent install

    Is it possible to push / silent install the Cisco Unified Attendant Console 10.x Advanced client ?    

    Currently, it is not possible to push/silently install the Advanced client. We are in the process of completing a deployment tool that will make this possible for Standard but would need to explore the option for Advanced.

  • Maintaining the Directory in Cisco CallManager Attendant console

    I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

    Hi,
    Thanks for the doc..4* for the info.
    This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
    1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
    2) Re-start the TCD service again.
    3) Shut down the AC client and re-open it.
    This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
    Please rate useful posts...

  • Unified Attendant Console - License and Remote Site

    I need  an Attendant Console solution for a 6 site IPT design.  I have CUCMBE at the corporate site with 5 remote locations.  I want to have an Attendant Console in each location.  I was going to use the Business Attendant version, but  see it only support 3 Queues, thoguht I had read it was 6 queues, so I guess I need to go with the Enterprise version.
    1.  To support 6 active clients, I need to order 6 licenses at $2950.00?  Seems awful expensive compared to the old Attendant Console...
    2.  Queues would need to be created for each site, Business only has 3, but Enterprise has 50?

    Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
    Thanks a lot.
    regards
    Marc

  • Unified Attendant Console - UCSS Pricing

    If I have 6 active licenses for any of the versions of Attendant Console, then do I need to order 6 instances of UCSS?

    Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
    Thanks a lot.
    regards
    Marc

  • Cisco Enterprise Attendant Console 8.0 - Second Console Queue

    Hello Guys,
    We have 1 reception console in the head office and we want to setup 2nd reception console in different location (London).
    we have 2 operators license on CUEAC, I setup second operator with a seperat queue. We want to redirect the calls to London auto attendant (unity) when the second console is not "logged in" or busy. Right now they both are going to head office auto attendant in the Unity.
    Is it possible to keep them seperate so each queue can point to its prompts in the Unity?
    Thanks
    Sunny

    i dont have this option, I am running System Version: 8.0.0.5. Does that mean I have to upgrade? I was looking into upgrading to version 9 but I am not sure if the upgrade is free and if there will be any issue upgrading.

  • Unified Communications Attendant console: queue does not show in the client

    Hello,
    I have Cisco Unified Attendant Console - Department Edition 9.1.1.10 in conjunction with CUCM 9.1.1.
    My problem is that when I login with the operator account to the client the queue does not show up as expected.
    I have configured the queue, synchronized with CUCM, i can see it in CUCM under device/CTI route point, i have associated the queue to the operator in user configuration queue association.
    but when i login as the opeartor to the client i can not see it.
    any help is apreciated.
    thanks

    Hi,
    This is working correctly, as you can only associated a single queue (department), this is not displayed in the operator console client.
    You only see the queue list in Business, Enterprise or Premium Edition.
    Jamie

  • High Available Attendant console for BE6K?

    Hi Arun and team,
    Where is it documented whether or not BE6K supports the new release 9.0 High Available Premium Attendant console?
    The BE6K data sheet says supports "Cisco Unified Attendant Consoles" and then gives a specification of 500 max users and 12 attendants (implying Business Attendant) and that cant be right since BE6K supports 1000 users.
    The Data Sheets for the Attendants dont really say if they are compatible with BE6K.In fact, the CUEAC implies it wouldnt work on BE6K since its says it needs 'specs based support'
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUACDE_Rel_N_9_0_1_10.pdf
    This should be an easy thing to find ;-(
    Anyone know where I can find it?
    Thanks,
    Steve

    Nihal
    May I suggest kindly cleaning up the documentation so that this is laid out clearly to all of us. This one gives you the impression no change is to be made to the OVA no matter what the console is.
    http://docwiki.cisco.com/wiki/Cisco_Business_Edition_6000_OVA/OVF_Templates#Unified_Attendant_Consoles
    Then we move to the data sheet
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11369/data_sheet_c78-638921.html
    Cisco Unified Attendant Consoles is designed specifically for customers with a maximum of 500 IP phones and 12 operators concurrently logged in
    So does that mean even if you have premium we can only do 500 Phones and 12 operators? That doesn't sound right.
    Next I have this deck from Cisco that says only 25 operators supported. Screen shot attached. So what are the maximums for each type of console supported by the BE6K BU(CUB, CUD, CUE and CUPAC)
    Thanks
    Srini

  • Upgrade CUEAC version 9 to Attendant Console Advanced 10

    Hi
    I am running CUEAC 9.1 with CUCM version 9.1. My customer wants to upgrade the attendant console to version 10 advanced,  but keep CUCM at version 9. I see this is supported from the attendant console documentation I have read. I believe version 10 is a serverless offering. Is there the option to go version 10 on my current windows 2008 server(this is where version 9 is running) or does it have to be serverless. Is it possible to introduce high availability if I upgrade to version 10 advanced? I am finding it hard to find definitive documentation for this.
    Thanks,
    Derek

    [+5] to Jaime.
    High Availability is supported in Advanced version .You can refer datasheet
    http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-attendant-console/data_sheet_C78-731867.html
    further, as mentioned by Jaime, you can refer release notes of Advanced and Standard version for Compatibility with Call manager & OS requirements .Advanced version is supported on VMWare.
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuaca/10_5_1/release_notes/CUACA1051RN.pdf
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/release_notes/CUACS10511543RN.pdf
    http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Attendant_Consoles
    regds,
    aman

  • Attendant console issues

    I upgraded call manager from 5.1(2) to 6.1(2). I upgraded attendant console for the reception. Most of the features are working.
    When the call come in attendant console does not see an incoming call under CALL PROCESSING window.
    Please advise..
    Thanks

    If you do not configure the user, the attendant console cannot interact with CTIManager, and the attendant cannot receive calls so configure the user.
    Cisco CallManager Attendant Console Frequently Asked Questions.
    http://www.cisco.com/en/US/products/ps7282/products_qanda_item09186a00800b0a20.shtml
    Cisco CallManager Attendant Console Issues
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/trouble/4_0_1/tb401c10.html#wp1000555

  • SPA500S Attendant Console BLF and Broadsoft NOT working on firmware 7.4.6

    Like many of us, for many years now, have continous problems with the Cisco SPA500S Attendant Console. In my case, I'm running my phones with 7.4.6 because it is the version of the Cisco SPA504/508G phone firmware that is certified to work on our current version of Broadsoft's Hosted PBX.
    The phones work very well indeed, but the attendant console lights up after a re-boot of the BLF phone is performed, however, the actual SPA500S unit doesn't perform onitoring at all.
    I've read every blog/discussino on this matter and it is becoming a nuisance at this point. I dont understand why it takes so much trouble to configure something so easy and what a stark difference there seems to be when you upgrade SPA50XG phones on the firmware from one firmware release to the next one.
    I'm looking for anyone that has had this issue that can help me configure the Cisco SPA508G phone that servers as the monitoring phone with a single SPA500S Attendant Console unit to monitor 4 extensions.
    Jose A.

    We just installed an new system with the SPA508g phones and the SPA 500s Side Car and are having the same monitoring issues. We have notified our support and they have been tweeking our system quite a  bit. If this is a known issue why is CISCO not resolving it. Does CISCO monitor these forums?

  • How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

    Hi,
    Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
    I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
    How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
    Kind regards,
    Carl-Marius

    Hi Michael,
    It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
    Thank you for your fast and very precise help!
    Kind regards,
    Carl-Marius

  • # of Attendant Console Users that CCM 3.3 can handle

    We have been told by various Cisco Sources that CCM 3.3 can handle unlimited Attendant Console Users and installs. Yet, other Cisco Sources say that CCM 3.3 can only handle up to a fixed amount. So which one is true?

    I don't see any such restrictions mentioned in any document. I guess it all depends on the number of device weights a CCM can manage. You may like to verify the same from
    Cisco CallManager Attendant Console
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801eff7c.html

Maybe you are looking for

  • Cannot create file at download

    When I go to download a file, the Mini goes to the download page and starts to download the file. It stops after 8.3K of the file with the note of "can not create file" and the down load stops. I have tried to retry the download with out any success.

  • Got "Can't load AMD 64-bit .dll on a IA 32-bit platform"error on 64-bits VM

    Hello all: I created a jnlp file, which includes a executable jar and a wrapped dependent jar of two DLL files inside. When I launched JWS, I received the error: "Can't load AMD 64-bit .dll on a IA 32-bit platform". Now the basic facts: 1. the JVM is

  • Tracks only show in recently added? not music library

    anything i add to itunes will show in recently added (or play list) and play fine but do not show in music library? Show in finder will display items where they should be in music folder in finder.  Searching through the recently added playlist is no

  • The 4 standards apps in the bottom on ios7

    the 4 standards apps that is on the bottom on the screen which is: phone, mail, safari, and music. is there anyway to remove one of them and add others?  if yes, please give me steps by steps instructions.  Thanks in advance.

  • Communication between Applets & Servlets

    How do you communicate in between Applets & Servlets ?