Cisco Unified Callmanager tsp port number

Dear all,
does anyone know which port I need to open to be able to use my tsp in outlook?
regards,
gerard

Hi,
Check this link:
--> CISCO UNIFIED CALLMANAGER 4.1 TCP AND UDP PORT USAGE: http://www.cisco.com/application/pdf/en/us/guest/products/ps5820/c1693/ccmigration_09186a00807217e1.pdf
Also, you should open the TAPI ports for the TSP integration.

Similar Messages

Cisco Unified TAPI TSP Client Windows 7 quick question

http://www.cisco.com/en/US/customer/prod/collateral/voicesw/ps6789/ps7046/ps7282/product_bulletin_c25-563280_ps556_Products_Bulletin.html
Inside of the product bulletin for the release of the CUCM products for Windows 7 it lists:
Cisco Unified TAPI TSP Client (including Wave Driver)
Version 8.5(1), FCS Q4CY10
• WoW64 - Not applicable
• Native 64 - Target FCS Q4CY10
My question is this - the 'Version 8.5(1)" is that the version of CUCM that I will have to upgrade too? Or is there a TAPI TSP download seperate from the Call Manager upgrades? I am currently on 7.1.x
Silly question I know...but trying to find the answer.

Hello,
so does it mean: There is NO WAY to make a TAPI/TSP Service Provider 8.6(2.4) work with CallManager 7.x? I have a Win7 64bit system here, but the CallManager still ist on 7.x.
Kind Regards,
Olaf

Callmanager Express with Cisco Unified CallManager

Dear people,
I'm new to the whole voice thing, and we have a new requirement at work.
We have a cluster implementation of Cisco Unified CallManager at the head office, 2 nodes, and recently we need to integrate a branch office that has Callmanager Express...
My question starts with... Where should we start, and what should be the possible scenario
Regards

Hello Saladin211,
Besides Java's nice reference, here you have another valuable info that might help you:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intcmecm.html
Hope it helps, if it does please rate.
Kind regards,
- Adrian

Cisco Unified CallManager User Options Login Error

Dear All,
When trying to login to the Cisco Unified CallManager User Options page through this link https://CUCM_IP:8443/ccmuser/showhome.do and entering the userID and password i got the following error in the attachment
Kindly Advice...

Hi Esam,
Can you try without (showhome.do);
https://x.x.x.x:8443/ccmuser/
or
https://hostname/ccmuser/
Hope this helps!
Rob

N80 for Cisco Unified CallManager

We know that Nokia has a client software for Cisco Unified CallManager which gives Cisco IP Communications functionality (VoIP functionality under Cisco infrastructures) to Nokia E60, Nokia E61 and Nokia E70s.
The question is will there be a similiar application which will give the same functionality for Nseries devices (especially N80s and future coming N95s)?

i do hope there is, but Nokia's series like E & N have a diffrent target of customers & features!Message Edited by android on 14-May-200704:12 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Cisco Unified callmanager - Upgrade

HI everybody,
where can i download these images?
Cisco callmanager
10.5(1.98000.387)
10.5(1.98000.476)
10.5(1.98050.102)
I need this image for fix a bug.(SSL Padding Oracle On Downgraded Legacy Encryption (POODLE) Vulnerability)
are they special images?
thanks

Hi carrion,
Images available on cisco site for 10.5.1 are 10.5.1.10000-7.
https://software.cisco.com/download/release.html?mdfid=285963825&flowid=50402&softwareid=282074295&release=10.5(2)SU1&relind=AVAILABLE&rellifecycle=&reltype=latest
seems to be ES [Engineering Special ] version for resolving the bug. Open TAc case so that they can provide you.
regds,
aman

Cisco Unified CallManager 5.1 Customized Wallboard

Hi,
I want to create a customized wallboard for CM 5. It is based on linux. i need some guidance how to start with? what approach is needed. how to connect to linux db from .net/c#. axl api can do the job how to cosume the webservice. Please guide me in executing this task.

IPCC Express = Unified Contact Center Express.
There is no such thing as Unified Contact Center... there's a Unified Contact Center Express, a Unified Contact Center Enterprise and a Unified Contact Center Hosted.
First order of business for you is to identify which product you have and which version. Second order of business is look at the appropriate product page and look at what guides are available.
There's also a bunch of information available (cco account required) in the developer support pages here: http://www.cisco.com/cgi-bin/dev_support/access_level/product_support
But nothing can rid of you having to understand and learn about the product you're dealing with. You may be best served asking your colleagues that installed the software, or whomever installed the software to give you a crash course about the product, as without proper knowledge, you'll always be hunting for information - there's just no substitute for understanding the product you're working with.

What are the main Differences between Cisco CallManagerExpress and full blown Cisco Unified CallManager

I am trying to decide which to deploy to a site that has a little over 100 users and they use a lot of features with their current phone system setup. For example, one setup is ring once to 'x' user and if they dont answer forward the call to 'y' group of users and if they dont answer, go to 'user x' voicemail. Does CME support those kind of configurations?
Also i have a CUCM environment at one site... Can CME Integrate with that or is it more of a standalone?
Thanks for any input.

Not sure if this is still supported, but this is the only option I've heard for CME:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7274/data_sheet_c78-675112.html
HTH, please rate all useful posts!
Chris

Cisco Unified Communication Manager Deployment Model Question

Hello,
I am researching how to create a cluster over the WAN for CUCM and all of the design specifications I look at have a Voice Router between the cloud and the Subscribing servers. Why can the Subscribing servers not talk directly to each other?
Thank You
P.S such as this http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42models.html#wp1045977
Local Failover Deployment Model
The local failover deployment model provides the most resilience for clustering over the WAN. Each of the sites in this model contains at least one primary Cisco Unified CallManager subscriber and one backup subscriber. This configuration can support up to four sites. The maximum number of phones and other devices will be dependant on the quantity and type of servers deployed. The maximum total number of IP phones for all sites is 30,000. (See Figure 2-5.)
Figure 2-5 Example of Local Failover Model

Hi
They can talk to each other directly, you are correct.
Typically a voice router would also be a WAN router only in small branch sites.
On a deployment anywhere near the size indicated the voice gateways would be single-purpose hosts (as they are also indicated on the diagram).
I presume they are indicated with a V as the 'could' be voice gateways as well, though they would almost certainly not be.
Aaron

Cisco Unified Communications Manager Business Edition

Hi,
As per my understanding this is only one server solution and you can not have more than one server i.e no sub only Pub. Is this correct?
Thanks
Ati

Hi Ati,
You are most correct :) This is is "single server" solution for small to medium sized businesses up to 500 users. It comes packaged with Unity Connection for Voicemail.
Here is a clip;
"Cisco Unified Communications Manager Business Edition is an easy-to-manage solution that combines voice, video, mobility, and messaging on a single server to simplify system administration and reduce hardware and operating expenses. This solution provides cost-effective deployment options for medium-sized organizations with smaller IT staffs that require all the advanced capabilities of Cisco Unified Communications Manager (formerly Cisco Unified CallManager), Cisco Unity Connection, Cisco Unified Mobility (formerly Cisco Unified MobilityManager), and integrated management on a single server to expedite migration to unified communications."
From this good doc;
http://www.cisco.com/en/US/products/ps7273/products_data_sheet0900aecd805e6985.html
Hope this helps!
Rob

Cisco ASA, skipping real source port number with PAT.

Hi Experts,
Cisco ASA configuration guide says:
"PAT translates multiple real addresses to a single mapped IP address by translating the real address and source port to the mapped address and a unique port. If available, the real source port number is used for the mapped port. "
Is it possible to skip this ? I do not want to use real source port number. The issue is, when I have a PAT entry with real source port (port 5060), - SIP session doesn't work. With all the other ports numbers,- everything works.

Hi,
Notice that the configuration you try does not modify the real source port at all.
Since you are using the same "object" for the real/mapped service then the configuration above matches traffic where the connections destination is "any" and the destination is "udp 6000 65535" and only when the source is "udp sip" and in that event it keeps the exact same "udp sip" source port as you are using the same "object".
I am not sure if its a software or configuration related issue but I have not gotten this to work reliably on my ASA. I might have to try some other software level.
I guess you would want to match the SIP source port in the Dynamic PAT and avoid using the SIP port as the mapped port?. With that in mind I was thinking something like this
object service UDP-SIP
service udp source eq sip
object service UDP-SIP-MAPPED
service udp source range 30000 31000
nat (VoiP,outside) source dynamic <source network object> interface service UDP-SIP UDP-SIP-MAPPED
Though it seems the above configuration seems to be bypassed by the ASA completely and it seems to use the identical source port as the mapped port even though it matches the configuration.
If I were to change the above configuration from "dynamic" to "static" then the configuration matches but it uses only the first mapped "source" port of "30000". I guess it would only use a different mapped port if you used multiple real source ports also instead of the current single source port "sip".
nat (VoiP,outside) source static <source network object> interface service UDP-SIP UDP-SIP-MAPPED unidirectional
Example from my own ASA.
DYNAMIC
- Matches the configuration but doesnt map the port at all
Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source dynamic LAN-NETWORK interface service SIP SIP-MAPPED
Additional Information:
Dynamic translate 10.0.0.123/5060 to <my pat ip>/5060
STATIC
- Matches the configuration and maps the source port but only uses the first mapped port from the range
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static LAN-NETWORK interface service SIP SIP-MAPPED unidirectional
Additional Information:
Static translate 10.0.0.123/5060 to <my pat ip>/30000
I am not really sure if this configuration is reliable at all but its the only thing I can think of at the moment.
Hope this helps :)
- Jouni

Cisco Unified CM Telephony Trigger Directory number

Hello, is it possible to set Cisco Unified CM Telephony Trigger directory number within UCCX with wildcards, for e.g 3XX and all numbers matching that number, execute connected application. Or is there any other way to execute UCCX application for a range of directory numbers?
What I want to achieve is that, I want to control all outbound calls starting with dedicated prefix with UCCX application.
Thanks

I have used wild card on several ocassions, and get flaky results 50% of the time. I then end up breaking the triggers apart and specifying each one separately.
From what I recall reading, the latest versions of CUCM actually have a parameter now, that enables this feature. You didn't say what version of UCCX and CUCM you are running, so it's possible you need to flip this switch to ON.
https://supportforums.cisco.com/message/3429151

Is there any option on Cisco Unified CM Administration 9.1.1 to show caller ID number when using MOBILITY option?

Dear All,
I am using Cisco Unified CM Administration 9.1.1 and MOBILITY works fine.
However when somebody calls from external phone number into internal user number and MOBILITY option is ON and obviously, forwards the call for the user's cell.....in this case user can see only main company number, but not a caller number.
So, is there any option to change it?
Thank you

Go to the GW and run some debugs to find out exactly what you're sending, chances are, your telco is overwriting the original called number as it's nor part of your DID range.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

IPhone - Cisco Unified Mobile Communicator

I used to have Cisco Mobile 8.0 with ( Cisco Dual mode for iphone devices ) that start with TCT<username>
Within this App, I had to configure this in the settings of the app on the Iphone
Device ID : TCT....
TFTP : cucm
The Mobile 8.0 was working fine
I cant find Mobile 8.0 on the apps store anymore, I can find Cisco Unified Mobile Communicator, it seems to be the new version
now it ask
user
password
phone number
server
port
And I cant make it work.. anyone have some experience to share with this new application ?

Richard is correct. The CIMC app was used with the Cisco Unified Mobiliy Advantage server which has long been EoL. The app remains in the store only for customers who have this solution in production.
Cisco Mobile 8.1 was renamed to Cisco Jabber and more recently Cisco Jabber Voice to distinguish it from the unified VoIP+IM client that is now called Cisco Jabber.
Please remember to rate helpful responses and identify helpful or correct answers.

Cisco Unified Callmanager tsp port number

Similar Messages

Maybe you are looking for