Cisco Unified CM Administration ver 7.1 date and time issue
We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes... Thanks Don
The latest release of CUCM 7.1.5 is 7.1.5.35901-1, so you can always try that. Link to download:
http://software.cisco.com/download/release.html?mdfid=282421166&flowid=45895&softwareid=282074295&release=7.1(5b)SU6a&relind=AVAILABLE&rellifecycle=&reltype=latest
The latest version of CUCM software is 9.1.2 with 10.0 coming out any day, thought those would be considered major upgrades and would require some planning, on i.e. ensure hardware compatibility, all software compatibilities, ELM licensing migration, etc.
HTH,
Chris
Similar Messages
-
Date and Time Issue for Mult Org...
Hello,
How can I manage the date time, if my organizations have different plant and location?
I.e. The database server located in Pacific Time zone and the application may access from new plant German time zone.
Whenever the German business center enters any sales transaction it should take German current date and time instead of Pacific Time.
Pls advice me
Thanks,Raghu.KHi,
While defining a Location, you can mention the time zone for that location and also the inventory organisation to which this location belongs.
So, this location can be assigned to your organisations. You can access the time zone according to the location you select.
regards -
Recently, my iPod touch 2G has been reverting to a different date and time from the actual. The time zone is set on eastern time (Atlanta USA) but it keeps changing the date to February 8, 2009 and 11:09PM. Even after I change it in general settings, it goes back to the other after time.
Any ideas?I've heard about this little bug and it has happened to me on a few occasions.
Apparently, it appears when you put your PC to sleep when iTunes is open. So when you resume from Sleep Mode, make sure you close iTunes, then connect your iPod or re-open iTunes. -
I have date and time with different format , Need in Single date and Time format.
Input
13/03/15 09:09
13/03/15 07:39
13/03/15 08:09
13/03/15 08:51
3/13/15 09:39:14 AM
3/13/15 09:38:14 AM
3/13/15 09:37:59 AM
3/13/2015 09:37:59 AM
Problem with the below Output
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
13/03/15 09:39 AM
13/03/15 09:38 AM
Output required in the below format for all of the above date and Time with proper date & time
13/03/15 09:39 AMIndudhar,
I don't know if the following will help or not, but hopefully you can see what I'm doing and modify it to give you the string format of the DateTime the way you want it:
ption Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Public Enum DateTimeFormat
LongDateLongTime
LongDateShortTime
ShortDateLongTime
ShortDateShortTime
LongDateOnly
ShortDateOnly
LongTimeOnly
ShortTimeOnly
End Enum
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
' Test it here...
Stop
End Sub
Private Function GetFormattedDateTimeString(ByVal dt As DateTime, _
ByVal formatType As DateTimeFormat) As String
Select Case formatType
Case DateTimeFormat.LongDateLongTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.LongDateOnly
Return dt.ToLongDateString
Case DateTimeFormat.LongDateShortTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.LongTimeOnly
Return dt.ToLongTimeString
Case DateTimeFormat.ShortDateLongTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.ShortDateOnly
Return dt.ToShortDateString
Case DateTimeFormat.ShortDateShortTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.ShortTimeOnly
Return dt.ToShortTimeString
Case Else
Return String.Empty
End Select
End Function
End Class
I hope that helps. :)
Still lost in code, just at a little higher level.
No Frank, Same Problem.....Kindly help me X1 = 14/03/15 19:30
I need time Diff of now and X1
Dim myDateTime As DateTime = GetFormattedDateTimeString(X1, DateTimeFormat.ShortDateOnly)
myDate = myDateTime.ToString("dd/MM/yy")
myTime = myDateTime.ToString("hh:mm tt")
Dim myDateTime1 As DateTime = Now
Dim myDate1 = myDateTime1.ToString("dd/MM/yy")
Dim myTime1 = myDateTime1.ToString("hh:mm tt")
Dim diff As TimeSpan = myDateTime1.TimeOfDay - myDateTime.TimeOfDay
Dim diffString As String = String.Format("{0:00}:{1:00}:{2:00}", _
Math.Abs(diff.Hours), Math.Abs(diff.Minutes), Math.Abs(diff.Seconds)) -
Time Machine: Mavericks backup date and time issues
Time Machine: Troubleshooting backup issues
re: http://support.apple.com/kb/HT3275
"Messages you may see after clicking the red "i" include:"
I am getting a message not listed at this page. My Time Machine fails to backup to my USB3 Passport External Drive with the error code:
"Time Machine couldn't complete the
backup to "2T PP".
The system date and time is incorrect."
I have the Date & Time preference set to:
"√ Set date and time automatically: Apple Americas/U.S. (time.apple.com)"
and it seems to be the correct time.
The Language & Region prefs, advanced, Dates tab is set to defaults but I cannot get TM to backup and the same error occurs.
How can I remedy this?Because you have just loaded a new operating system and a complete backup occurs is my understanding.
-
HT203483 Date and time issue in iPhone 5c
I have update with latest firmware but date and time proble not solved
Hello komalsingh235,
If I understand correctly your phone is not automatically getting the correct date and time. Use these steps from the following article. If the troubleshooting does not correct it, then it also has a resource for you to get additional support:
iOS: Troubleshooting issues with date and time
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
Thank you for using Apple Support Communities.
All the best,
Sterling -
New phone. How do I get the date to change everyday without doing it manually? Also, how do change the time from military to non-military? Tks.
Go to settings>time and date settings>auto update of time and date>on.
Settings>time and date settings>time format>12 hour.
Hope this helps. -
Inserting Date and Time Issues
Hi All,
I have a very simple select query as follows... UPLOAD_DATE is held in table1 in the following format: 23/01/2012 13:04:36
<cfquery name="test" datasource="test">
SELECT UPLOAD_DATE
FROM TABLE1
</cfquery>
and I loop around the above query to insert into another table...
<cfloop query="test">
<cfquery name="make_tfer2" datasource="test">
INSERT INTO TABLE2
(UPLOAD_DATE)
VALUES
(#test.UPLOAD_DATE#)
</cfloop>
</cfloop>
But, when I insert into table2 it inserts the date as: 23/01/2012 .... How do I correct this code so I can insert the date as: 23/01/2012 13:04:36 ????\'G\' wrote:
Hi All,
I have a very simple select query as follows... UPLOAD_DATE is held in table1 in the following format: 23/01/2012 13:04:36
<cfquery name="test" datasource="test">
SELECT UPLOAD_DATE
FROM TABLE1
</cfquery>
and I loop around the above query to insert into another table...
<cfloop query="test">
<cfquery name="make_tfer2" datasource="test">
INSERT INTO TABLE2
(UPLOAD_DATE)
VALUES
(#test.UPLOAD_DATE#)
</cfloop>
</cfloop>
But, when I insert into table2 it inserts the date as: 23/01/2012 .... How do I correct this code so I can insert the date as: 23/01/2012 13:04:36 ????
Two suggestions (just to answer the immediate question):
1) Make sure the datatype of the column Upload_date in Table2 is datetime (not just date).
2) Try something like
<cfoutput query="test">
<cfset date=dateFormat(parseDatetime(upload_date),"dd/mm/yyyy hh:mm:ss")>
<cfquery name="make_tfer2" datasource="test">
INSERT INTO TABLE2 (UPLOAD_DATE)
VALUES #date#
</cfquery>
</cfoutput> -
I resently updated my daughters iPhone 5C to IOS 8.1.1, but now the time and date is off. I 've tried to turn off "Set Automatic Time" based on cellular info, and set the time manually, but after a minute or so, the time is way off Again (as in several hours). Also it's to days behind now. Nothing happens when i switch the Automatic Time on Again.
I've tried to hardware reset the phone, reinstall the OS via PC, and change the time Zone, but nothing seems to Work.Double checked, and the localization in iTunes for the account on the PC is set til Copenhagen, Denmark, så that's not the issue.
-
Date and Time issue oracle job
i have wriited oracle job to execute my procedure and the job has to execute the procdedure at 11:30 pm every day.
following are the parameters of the JOB.
next_date => TRUNC(SYSDATE) + 23/24+ 0.5/24
interval => 'SYSDATE + 1'
But it is not executing the procedure at 11.30 pm everydat. Waht coud be wrong in the schedule part. please help me in this.Hi,
born2win wrote:
i have wriited oracle job to execute my procedure and the job has to execute the procdedure at 11:30 pm every day.
following are the parameters of the JOB.
next_date => TRUNC(SYSDATE) + 23/24+ 0.5/24
interval => 'SYSDATE + 1'
But it is not executing the procedure at 11.30 pm everydat. Waht coud be wrong in the schedule part. please help me in this.When you use SYSDATE in the interval parameter, it is the time when the job finishes , not the time when the job begins (which may not be the time you wanted the job to begin, if the database is down).
If, regardless of when a job finishes, you want it to run again at 11:30 PM the next day, then use
interval => 'TRUNC (SYSDATE) + 1 + (23.5 / 24)'Unless you're using a very old version of Oracle, you should use dbms_scheduler instead of dbms_job. See
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sched.htm#CIHHBGGI -
Cannot reset user vmail password with Cisco Unified CM Administration
We are using Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to me saying that they could no longer access voice mail, getting invalid pin. Ichanged the pin with the Cisco Unified CM Administration which accepts the new pin no problem but when we try it from the phone it doesn't work. Any ideas... Thanks Don
Hey Don,
Well, that's no good
There should be no correlation between resetting the user PIN
and the forwarding to voicemail.
Let's say that the user is @ DN/extension 5999.
In CUCM admin go to;
Device>Phone>Find List by Directory number> find 5999
on the DN config page look at the Call Forward sections (all, no answer, busy)
and make sure they are set to forward to VM (usually by using the VM checkbox)
If you need to, have a look at a working phone/DN for comparison
Cheers!
Rob
"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting"
-Springsteen -
Cisco SPA525g2 Date and time Not Synced with the PBX server
Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
I cannot get the Apple TV to move past the date and time issue. We have had it over a year and never had this problem. We have restarted both the Apple TV and the wireless router. Internet is working on all other devices. Help!
Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!
-
Cisco Unified CM Administration is not working in RDP sessions .
Dear all.,
Cisco unified cm administration we are working in sandbox labs connected through vpn of Cisco. But we are not able to access through remote desktop sessions. is it any possible to access through remote desktp sessions..?Hi
We are getting Cisco Unified CM Administration using sandbox labs. we are having a product for telecommunication . The name is CADEBILL. we are implementing the process from that product. we installed that product in a server. We have VPN through that sandboxlabs. That vpn is installed in local pc. From that local pc we will access the server in Remote desktop . in that server we are not able to install the anyconnect vpn . So this problem.
This is cisco unified CM version. System version: 8.6.1.20000-1 -
UCCX cannot open the "Cisco Unified OS Administration" system
Hi,
When I select "Cisco Unified OS Administration" and click "Go", the system shows below error messages.
Navigation:
Cisco Unified CCX Administration (Can open this webpage)
Cisco Unified CCX Serviceability (Can open this webpage)
Cisco Desktop Administrator (Can open this webpage)
Cisco Unified Serviceability (Can open this webpage)
Cisco Unified OS Administration (Cannot open, it shows error page)
Disaster Recovery System (Can open this webpage)
What is the problem?
Please help, thanks.
HTTP Status 500 -
type: Exception report
message:
description: The server encountered an internal error () that prevented it from fulfilling this request.
exception:
org.apache.jasper.JasperException: java.lang.NullPointerException
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:418)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause:
java.lang.NullPointerException
org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:428)
org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:311)
org.apache.struts.taglib.logic.RedirectTag.generateRedirectURL(RedirectTag.java:294)
org.apache.struts.taglib.logic.RedirectTag.doEndTag(RedirectTag.java:268)
org.apache.jsp.index_jsp._jspx_meth_logic_005fredirect_005f0(index_jsp.java:89)
org.apache.jsp.index_jsp._jspService(index_jsp.java:64)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
note: The full stack trace of the root cause is available in the logs.Hi,
After reinstalling the UCCX system, everything is ok.
Thanks for your help.
Maybe you are looking for
-
Mail quick look docx links no longer work
After upgrading the OS on my 2-year-old MacBook Pro to Yosemite (10.10) and also the new Mail update (8.0), I have lost a small, but very useful (to me) functionality. When someone sends me a .docx attachment in my email, I usually press the spacebar
-
I am totally new to Aperture 3, so be gentle! I would like to add some text to a picture, rather like you can do with photoshop! I realise that you can add text if you were producing a book, but I only want to do it to up load the picture to flickr a
-
How to receive output of Stored Procedure in OSB as Sync Reply
Dear OSB Experts- I need help for the following scenario as part of our requirements: 1. We have a OSB proxy Service which receives Input Msg from a JMS Queue, does validation and transformation of the message and publishes the transformed msg to a b
-
Display webpage in Flash Professional
I was wondering is there an easy to display a web page in flash professional?
-
Another case of file splitting
Hello I need your help to find the easier way to develop this kind of interface : My source file have a variable number of records. I would like to create as target datastores as much files as sets of a kixed number of records : For example : This fi