CISCO UNIFIED CONTACT CENTER EXPRESS - ORACLE WEB SERVICES

We need to access to an Oracle database information through Web Services, in a system witch Cisco Unified Contact Center Express 8.5.
Is there any way to do this? Thank you!

Hi Alicia,
Incase you are planning to obtain real time stats from the CRA_DB which is the UCCX db, this can be done via the use of a wallboard.
-This displays the data such as
available agents in CSQs, call volumes, talk times, wait times, and number of handled calls. You can enable the Unified CCX system to write Unified CCX real-time information to a database that can then be displayed on a wallboard.
-Not sure if this is what you are looking for, let me know, thanks
Prashanth

Similar Messages

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

Ask the Expert: Deployment and Troubleshooting Cisco Unified Contact Center Express (UCCX) Deployments

With Anirudh Ramachandran and Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the latest advancements in Cisco UCCX (such as the integration of Cisco Social Miner to provide agent chat and better reporting using the Cisco Unified Intelligence Center), as well as the existing features of Historical Reporting, custom reporting using the historical database, Agent Email services, JTAPI integration with CUCM, and the HA over WAN cluster mechanism.
Anirudh Ramachandran is a customer support engineer at the Cisco Backbone Technical Assistance Center in Bangalore, India. Working in the Asia-Pacific time zone for the last two years, he focuses on Cisco Unified Contact Center Express issues and specializes in Linux, JTAPI/CTI integration, and UCCX system and database issues. He holds the CCNP Voice and UCCX Specialist certifications, and is also a Red Hat Certified Engineer. Anirudh writes tools and automates bug workarounds for UCCX in addition to working on TAC service requests, and currently has authored and co-authored seven such tools. Anirudh graduated from the National Institute of Technology Karnataka with a Bachelor of Technology in Computer Engineering.
Abhiram Kramadhati is an engineer with the Contact Center Backbone team in the Asia Pacific timezone. He has been working with UCCX since he started with Cisco 2 years ago. During his time at Cisco, he has built his expertise around UCCX Telephony applications, JTAPI integration, UCCX system behaviour, LDAP components and also UCCX as IPIVR in UCCE environments. He also works on other technologies including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the region. Abhiram is a Telecommunications engineer from Bangalore, India.
Remember to use the rating system to let Anirudh and Abhiram know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video Contact Center subcommunity discussion forum shortly after the event. This event lasts through May 3, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Anthony,
Thanks for the question.
This is an interesting requirement, since the UCCX trigger's configuration is translated only to the Call Forward Busy External setting on the CUCM.
Trigger creation:
144768: Apr 22 21:54:23.789 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet.updateNewTrigger() - Creating a new Trigger :1234
144876: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet routePoint = 1234
144877: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet description = testt
144878: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet deviceName = testt
144879: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePool = {1B1B9EB6-7803-11D3-BDF0-00108302EAD1}
144880: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePoolName = Default
144881: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpace =
144882: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpaceName = None
144883: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet redirectCSS = default
144884: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet location = {29C5C1C4-8871-4D1E-8394-0B9181E8C54D}
144885: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet locationName = Hub_None
144886: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partition =
144887: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partitionName = None
144888: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfile =
144889: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfileName = None
144890: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyVM =
144891: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyDestination =
144892: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSS =
144893: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSSName = None
144953: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: try makeRequest() on AXL: 10.106.113.142, AXLUser: axl, AXLPassword: XXXXXX
144954: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:CCMVersionSOAPAdmin.getAXLVersion():7.1
144955: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - Start REQUEST ====================
144956: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 440
http://schemas.xmlsoap.org/soap/envelope/">MADM_5691234CRS Line descriptionCallPark
144957: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - End REQUEST ==================
144958: Apr 22 21:54:23.914 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: getSocket: MADM_LIB_AXL_AXL_SOCKET_POOL-0-79[TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=10.106.113.142,port=8443,localport=44913]]
144987: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - Start REQUEST ====================
144988: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 839
http://schemas.xmlsoap.org/soap/envelope/">MADM_570testttesttCTI Route PointCTI Route PointCTI Route PointSCCPUserRing1000010000
144989: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - End REQUEST ==================
145014: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - CTI RP created.
145015: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - Created a Route Point = 1234
As you would aready know, the UCCX will send an AXL request (within the SOAP envelope) to the CUCM to create this RP. Looking at the existing code, there does not seem to be a method where we are differentiating between CFB_internal and CFB_external while sending this request.
We have taken this as an enhancement request and also spoken to the business unit about the same. It has been added to the roadmap, we will reach out to you offline to understand the business case so that the process can be expedited if needed.
Keep the questions coming
Cheers,
Abhiram Kramadhati

CISCO UNIFIED CONTACT CENTER EXPRESS - SMS INTEGRATION

Is is possible to integrate Cisco Unified Solutions (Cisco Unified Contact Center Express) with a SMS system? Do you have any recommendation of solution (ej. Quescom)?

We do this all the time using XLM and SOAP...what exactly did you have in mind?
Peace,
Michael Clendening
CCIE 6487 (ISP-Dial)

CISCO UNIFIED CONTACT CENTER EXPRESS - ANSWERING TEMPLATES

It is possible in Cisco Unified Contact Center Express 8.5, Premium, to configure some templates for mail / SMS / chat answers, so all agents can serve customers in a predefined style?

If you are referring CAD Agent EMails you can check the section "configuring Templates" in the link below
========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cda85ccxug-cm.pdf
========
Regarding chat - Agents can communicate only with team members , supervisors and SME (if presence is enabled). The closest what you can have for the template is "
Predefined High-Priority Chat Message" which can be checked on page 57
=========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cad85ccxug-cm.pdf
=====
Hope this helps
Regards
Anuj

Cisco Unified Contact Center Express 8.5 feaures ( Standard License)

Can somebody give some info regarding what are the Highliting feaures that i can have with UCCX Sandard Licenses. ?
Can the Agents use CAD and for Superviosrs CSD ?What are the highligting features available with Sandard License ?
Recording and Silent Monitoring is Possible ?
Configured Licenses:
Package: Cisco Unified CCX Standard
Total IVR Port(s): 300
Cisco Unified CCX Standard Seat(s): 23
High Availability : Disabled
Cisco Unified CCX Maximum Agents: 400

Dear mohamedbineesh,
Allow me to answer as best as I can.
UCCX Standard Edition is quite a limited package, you won't be able to use features like CAD or Silent Monitoring/Recording. You can use Supervisor Desktop, but again, the features are limited, for a full view of features that you can use with Standard Edition, please check the document below:
Cisco Unified Contact Center Express
Solution Reference Network Design
Cisco Unified Contact Center Express, Release 8.
Cisco Unified CCX Packaging
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/design/uccx851srnd.pdf
IPPA features
CSD supported Licensing platforms
I hope this helps. Any question please let me know.
Regards,
Daniel Amador
CCIE# 38898 (Voice)

Cisco Unified Contact Center Express 8.5 and Call Manager 8.5 on single ESXi

Does Cisco support 2 virtual machines (on ESXi), one for Cisco Unified Contact Center Express 8.5 and one for Call Manager 8.5?
I have blade ucs b200.
Thanks a lot, Svetomir

Yes it is supported. Check this out http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines#Sizing_Examples
GP.
Pls rate helpful posts by clicking on stars below the post !!

Unified Contact Center Express installation error

HELLO
while installing the Unified Contact Center Express 9 on vmware ESXI5.1 i am getting the attached error
the VM config
2 cpu
4 gb ram
160 gb hdd
os rhcl5 32bit
Please help

http://software.cisco.com/download/release.html?mdfid=284666782&softwareid=283733053&release=2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Chris

Cisco Unified Call Center Express on Wallboard

Hpw can I output 1 line of data from the Call Center Express software(specifically the Open Call datat) onto 2 wallboards in the call center?

Yes it is supported. Check this out http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines#Sizing_Examples
GP.
Pls rate helpful posts by clicking on stars below the post !!

Cisco Unified Contact Center 8.5. Field report description

Hi,
In the Cisco Contact Center reports there are some fields. One of those fields about the telephone calls is "Do not care". What does mean this field? what kind of telephone calls are in this fields?
Thanks,
Regards,
David Lozano

Hi Harrison,
Thanks for the reply. BTW, this not the answer that i need. If any table have data regarding location/operational area, so i need to know that table, coz i used official database manual too. but there is no such table they mention there.
As you said, i checked with the team/skill and resource table, but there is no way to find a location or a operational area.
Thx
ComBank100

Scale CCX, Contact Center Express in BE 6000

I know that "The Business Edition 6000 Cisco Unified Contact Center Express supports up to 100 concurrent call center agents with agent-based service" but ....
How is this enforced?
can 110 or 120 Agents concurrent be loged in if there is available ccx licenses?
What about HA, it is active active for ccx since 8.6 ver
I would really appreciate answers
BRegards

Hi,
it may require some programming, but it's possible.
What I would do: use the Cisco Unified Routing Rules Interface (CURRI) API. Here's how:
1. call center agent initiates outbound call;
2. CUCM asks the CURRI server (to be created), with the following parameters: the calling number, the called number;
3. CURRI server asks UCCX: is there an active login associated with this calling number?
If yes, the call will be allowed. Otherwise, it will be denied (perhaps with a treatment, saying that you are not allowed to call this number).
G.

Cisco security agent for Contact center express

Hi,
I have Cisco Contact center express version 7 SR 5 running on server with operating server Windows 2003.1.5. Please let me know which version of Cisco security agent is compatible with above mentioned CCX version & OS version.
I refered to the CCX comaptibilty guide but but I did not get information regarding operating system comaptibility with CSA. Kindly provide the same.
Also I tried version 5.0.0.235 of CSA it gave error "CIsco works common service is not installed" & insatllation aborted. I do not have CWLMS in network do i need to install some cisco works common services?
Regards,
Atul Kaul

Hi Atul,
These are the compatible version of CSA with 7.01Sr5. Recommended one is the highest and latest in the list 5.2.0.296-3.1(9)k9. You can install this in the server regardless of the version OS if you have UCCX 7.01 Sr5.
4.5.1.639-2.0(3)
4.5.1.645-2.0(4)
4.5.1.655-2.0(5)
5.0.0.187-3.0(1)
5.0.0.205-3.0(3)
5.0.0.210-3.0(3)
5.0.0.216-3.0(4)
5.0.0.217-3.0(5)
5.0.0.217-3.0(6)
5.0.0.225-3.0(7)
5.0.0.232-3.0(9)
5.0.0.235-3.0(10)
5.2.0.281-3.1(3)k9
5.2.0.282-3.1(5)k9
5.2.0.282-3.1(7)k9
5.2.0.296-3.1(9)k9
Thank you
Rajani Joshi

The sandbox of Unified Contact Center Enterprise always shows the error "Finesse is out of service."

Hi guys,
I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
Does anyone meet the issue?
William

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Confirming method to secure web services through oracle web service manager

Hi All,
I am just wondering about the method to secure web service through oracle web service manager.
I have a unsecure web service "helloworld" which is deployed on JWSDP1.6 toolkit.I want to secure it through oracle web service manager.
Inorder to secure this unsecure web service,I use gateway(web service manager for securing web service using message level security through certificate).
So when client want to access the helloworld service,it contacts the gateway securely and gateway intern connect to original web service after decrypting and verification of the signature.When gateway gets response from the web service,it signs the response message and then encrypt and passs on to the client.
So my question is,is it the right way to secure web service?
As I am getting the following fault exception :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<SOAP-ENV:Fault>
<faultcode "http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode>
<faultstring>Step execution failed with an exception
</faultstring>
<detail></detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I checked the log at :
C:\coresv_install_home\external\oc4j-10.1.2.0.0\j2ee\home\log\http-web-access
but there is no helpful information available.Thanks for any help.
Kash

Hi Rajesh,
Thanks for your reply.I am using the following policy steps:
1)for Request (Decrypt and Verify signature).
2)for Response(Sign Message and Encrypt).
The configuration for Request is shown below:
Pipeline "Request"
Pipeline Steps:
Start Pipeline
Log
Decrypt and Verify Signature
Basic Properties Type Default Value
Enabled (*) boolean true true
XML Decryption Properties Type Default Value
Decryptor''s keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Decrypt Keystore Type (*) string jks jks
Decryptor''s keystore password string *******
Decryptor''s private-key alias (*) string s1as
Decryptor''s private-key password string *******
Enforce Encryption (*) boolean true true
XML Signature Verification Properties Type Default Value
Verifying Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Verifying Keystore type (*) string jks jks
Verifying Keystore password string *******
Signer''s public-key alias (*) string xws-security-client
Enforce Signing (*) boolean true true
End Pipeline
And the configuration for Response is shown below:
Pipeline "Response"
Pipeline Steps:
Start Pipeline
Log
Sign Message and Encrypt
Basic Properties Type Default Value
Enabled (*) boolean true true
Signing Properties Type Default Value
Signing Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
Signing Keystore Type (*) string jks jks
Signing Keystore password string *******
Signer''s private-key alias (*) string s1as
Signer''s private-key password string *******
Signed Content (*) string BODY BODY
Sign XPATH Expression string
Sign XML Namespace string[]
Encryption Properties Type Default Value
Encryption Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
Encrypt Keystore Type (*) string jks jks
Encryption Keystore password string *******
Decryptor''s public-key alias (*) string xws-security-client
Encrypted Content (*) string BODY BODY
Encrypt XPATH Expression string
Encrypt XML Namespace string[]
End Pipeline
I checked the log again but nothing useful there,it is just giving the following values:
2006-08-14 16:32:50,372 INFO [Thread-21] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - INSERT INTO MEASUREMENT_PERSISTED_STORE (ID,DEF_ID,CONTEXT_ID,PARENT_CONTEXT_ID,TIME,STORETIME,KEY0,KEY1,KEY2,KEY3,KEY4,KEY5,KEY6,KEY7,KEY8,KEY9,KEY10,KEY11,KEY12,KEY13,KEY14,KEY15,KEY16,KEY17,KEY18,KEY19,KEY20,KEY21,KEY22,KEY23,KEY24,KEY25,KEY26,KEY27,KEY28,KEY29,KEY30,KEY31,KEY32,KEY33,KEY34,KEY35,KEY36,KEY37,KEY38,KEY39,DBM0,MEASUREMENT_STR) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,'R',empty_clob())
2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
Any help would be appreciated.Thanks.
Kash

Historical Reporting Contact Center Express - Errors

Hello
When i create the report on my contact center express for historical information of somes ACDs, i am watching the following:
Reject: Remote Timeout
Reject: Channels Busy
Reject: Trigger Failed
What these reasons code mean???
Thanks,
Alexis Munoz

Aaron,
Thank you I will try what you suggest.
Respectfully,
Deborah
Deborah A. Morgan
Mary Washington HealthCare
Information Systems Network Support Team
(540) 741-1048 voice
(540) 741-1072 fax
Email [email protected]
From: aaronharrison
To: Deborah Morgan
Date: 09/12/2011 05:18 PM
Subject: - Re: Contact Center Express 7 Historical
Reports Peak Time CSQ
Cisco Support Community
Re: Contact Center Express 7 Historical Reports Peak Time CSQ
created by aaronharrison in Contact Center - View the full discussion
Hi
The closest thing to what you are asking for that I've seen is the
'contact service queue activity by interval' report.
It produces normal CSQ stats (total, abandon etc) per interval (i.e. per
hour, 30 mins or 15 mins) through the day so you can see when your busy
times are.
Change the 'interval' to what you need on the detail tab before running
the report.
Regards
Aaron
Please rate helpful posts..
Reply to this message by going to Cisco Support Community
Start a new discussion in Contact Center at Cisco Support Community

CISCO UNIFIED CONTACT CENTER EXPRESS - ORACLE WEB SERVICES

Similar Messages

Maybe you are looking for