Cisco Unified Presence Administration Error

Guys!
I am experiencing a problem with a CUPS cluster (2 servers). It seems that one of the serveres is not properly working. Please help me troubleshoot the issue. Restarting the servers does not help. I have switched off one of them. The rest of the people are now on just one server.The issue is that not all clients have migrated to the server that is up. Please help me troubleshoot the error.
These are the notifications:
Cisco UP Server Recovery Manager (s00-0000-uc06) : The Cisco UP Server Recovery Manager has encountered an unrecoverable error and is in a Failed state.
Cisco UP Server Recovery Manager (s00-0000-uc05) : The Cisco UP Server Recovery Manager has encountered an unrecoverable error and is in a Failed state.
Cisco UP Replication Watcher (s00-0000-uc06) : The Cisco UP Replication Watcher has detected that database replication is not complete. Some services will remain in the "Starting" state until replication is successfully established.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher has detected that database replication is not complete. Some services will remain in the "Starting" state until replication is successfully established.
Cisco UP SIP Proxy (s00-0000-uc06) : requires a restart in order for recent configuration changes to take effect. You can restart this service here. After restarting the service, you must delete this notification manually.
Cisco UP SIP Proxy (s00-0000-uc05) : requires a restart in order for recent configuration changes to take effect. You can restart this service here. After restarting the service, you must delete this notification manually.
Cisco UP Replication Watcher (s00-0000-uc06) : The Cisco UP Replication Watcher has detected that database replication is not complete. Some services will remain in the "Starting" state until replication is successfully established.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher timeout value has been exceeded. Delayed services are now being started. Replication setup is in progress.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher has detected that database replication is not complete. Some services will remain in the "Starting" state until replication is successfully established.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher timeout value has been exceeded. Delayed services are now being started. Replication setup is in progress.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher has detected that database replication is not complete. Some services will remain in the "Starting" state until replication is successfully established.
Cisco UP Replication Watcher (s00-0000-uc06) : The Cisco UP Replication Watcher has detected that database replication has been successfully established.
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit has completed moving users to this node.
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit is in progress and users are automatically being moved to this node.
Cisco UP Server Recovery Manager (s00-0000-uc05) : An automatic failover has been initiated due to the peer node being down
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher has detected that database replication has been successfully established.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An automatic failover has been initiated due to the peer node being down
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit has completed moving users to this node.
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit is in progress and users are automatically being moved to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An audit has completed moving users to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An audit is in progress and users are automatically being moved to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : Both the nodes are running in backup mode, this may due to network connectivity issue between the nodes or \'Keep Alive (Heart Beat) Timeout\' is less than (or too close) to \'Keep Alive (Heartbeat) Interval\'.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An automatic failover has been initiated due to the peer node being down
Cisco UP Server Recovery Manager (s00-0000-uc05) : An automatic failover has been initiated due to the peer node being down
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit has completed moving users to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An audit has completed moving users to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : An audit is in progress and users are automatically being moved to this node.
Cisco UP Server Recovery Manager (s00-0000-uc05) : An audit is in progress and users are automatically being moved to this node.
Cisco UP Server Recovery Manager (s00-0000-uc06) : To recover both Cisco UP Server Recovery Managers from Failed state, please verify that all critical services are running, then press the recover button on the topology page.
Cisco UP Replication Watcher (s00-0000-uc06) : The Cisco UP Replication Watcher has detected that database replication has been successfully established.
Cisco UP Replication Watcher (s00-0000-uc05) : The Cisco UP Replication Watcher has detected that database replication has been successfully established.
Cisco UP Server Recovery Manager (s00-0000-uc05) : To recover both Cisco UP Server Recovery Managers from Failed state, please verify that all critical services are running, then press the recover button on the topology page.

Hello,
did you manage to fix this as i have customer with same error with regards the Recovery Manager.
we are on 8.5.1
and it is against both servers in cluster

Similar Messages

Cisco unified presence error

Hi, first at all i want to say that this is the first time that i have to troubleshoot a cisco unified presence error,
ok, there is a customer experiencing problems with his cisco unified personal communicators, none of the appear registered on the call manager
I tried restarting the services in the unified presence server and no result.
I used rtmt and i found out that last night Sync Agent App stopped
: Jul 20 06:31:10.982 UTC : %CCM_SERVICEMANAGER-GENERIC-6-ServiceStopped: Service stopped. Service Name:Cisco UP Sync Agent App ID:Cisco Service Manager Cluster ID: Node ID:CUP-SKARA
and after that is trying to log in somewhere with no result
: failed dev=ttyS0, pid=18620, login time out
I belive that is trying to log in with and active directory.
where can i found where is trying to log in, or where is asking me for a unser or password to log in?
thanks in advance.
Cesar

SyncAgent needs to be running to synchronize user information from CUCM.
User ID and password would be the CUCM username and password. You may test it with "User Options" page.
For details about "how things work" and troubleshooting, please see: http://www.lulu.com/content/5552336
Michael
http://htluo.blogspot.com

UCCX cannot open the "Cisco Unified OS Administration" system

Hi,
When I select "Cisco Unified OS Administration" and click "Go", the system shows below error messages.
Navigation:
Cisco Unified CCX Administration (Can open this webpage)
Cisco Unified CCX Serviceability    (Can open this webpage)
Cisco Desktop Administrator         (Can open this webpage)
Cisco Unified Serviceability           (Can open this webpage)
Cisco Unified OS Administration   (Cannot open, it shows error page)
Disaster Recovery System           (Can open this webpage)
What is the problem?
Please help, thanks.
HTTP Status 500 -
type: Exception report
message:
description: The server encountered an internal error () that prevented it from fulfilling this request.
exception:
org.apache.jasper.JasperException: java.lang.NullPointerException
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:418)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause:
java.lang.NullPointerException
     org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:428)
     org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:311)
     org.apache.struts.taglib.logic.RedirectTag.generateRedirectURL(RedirectTag.java:294)
     org.apache.struts.taglib.logic.RedirectTag.doEndTag(RedirectTag.java:268)
     org.apache.jsp.index_jsp._jspx_meth_logic_005fredirect_005f0(index_jsp.java:89)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:64)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
note: The full stack trace of the root cause is available in the logs.

Hi,
After reinstalling the UCCX system, everything is ok.
Thanks for your help.

Upgrade Cisco Unified Presence 8.5 to 9.1.1

dears,
I have cisco unified presence 8.5 installed on UCS server and i need to upgreade it to 9.1.1
I will upgrade the cucm and unity connection to 9.1.1
Please advise what are the steps to upgrade the presence to 9.1.1?
Best Reagrds,
Haytham

Hi Haytham,
Supported Upgrade Paths from IM Installation Instructions
and Presence Service.
Upgrades from Release 8.0(1) through 8.6(1) to Release 9.1(1) require
a Refresh Upgrade using the ciscocm.cup.refresh_upgrade_v1.01.cop.sgn
file.
Upgrades from Release 8.6(2) and 8.6(3) to Release 9.1(1) require a
Refresh Upgrade only.
Upgrades from Release 8.6(4), 8.6(5), and Release 9.0(1) to Release
9.1(1) require a Standard Upgrade only.
For more information about Refresh Upgrades and Standard
Upgrades, see the Upgrade Guide for Cisco Unified
Communications Manager, Release 9.1(1).
Note
Perform these steps to proceed with the upgrade:
1 Go to http://www.cisco.com/cisco/software/navigator.html.
2 Navigate to Products > Voice and Unified Communications >
Unified Communications Applications > Cisco Unified Presence
> Cisco Unified Communications Manager IM and Presence
Service Version 9.1 > Unified Presence Server (CUP)
Updates-9.1(1).
3 Download the complete ISO file:
UCSInstall_CUP_9.1.1.10000-8.sgn.iso
Release 8.0(1) through 8.6(x) and
Release 9.0(1) to 9.1(1)
Direct upgrades from Cisco Unified Presence Release 6.0(x) to Release 9.1(1) are not supported. You
must first upgrade to at least Release 8.0(1) of Cisco Unified Presence. For more information about
upgrading to Cisco Unified Presence Release 8.x, see the Release Notes for Cisco Unified Presence here
on Cisco.com: http://www.cisco.com/en/US/products/ps6837/prod_release_notes_list.html.
Note
Upgrade from Cisco.com
Cisco does not support downloading major IM and Presence Service software releases from Cisco.com, for
example, IM and Presence Service Release 9.0(1). You can download upgrade-only software images from
Cisco.com that are used to upgrade from a previous major software release to a subsequent software maintenance
release or point release of IM and Presence. For example, you can download Cisco Unified Presence Release
8.0(2) or Cisco Unified Presence Release 8.6(1) from Cisco.com.
To download this software, go to http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240.
You must have an account on Cisco.com to access the Software Center. The images posted at the Software
Center require existing installations of IM and Presence.
Release Notes for Cisco Unified Communications Manager, Release 9.1(1)
2 OL-
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_010.pdf
Thanks,
Anand
Pls rate helpful posts !!

Cisco Unified CM Administration is not working in RDP sessions .

Dear all.,
Cisco unified cm administration we are working in sandbox labs connected through vpn of Cisco. But we are not able to access through remote desktop sessions. is it any possible to access through remote desktp sessions..?

Hi
We are getting Cisco Unified CM Administration using sandbox labs. we are having a product for telecommunication . The name is CADEBILL. we are implementing the process from that product. we installed that product in a server. We have VPN through that sandboxlabs. That vpn is installed in local pc. From that local pc we will access the server in Remote desktop . in that server we are not able to install the anyconnect vpn . So this problem.
This is cisco unified CM version. System version: 8.6.1.20000-1

Cisco Unified Presence and Cisco CCX Integration.

Hi,
Please suggest how to integrate Cisco Unified Presence with Cisco UCCX. What are the configuration are to be done on Cisco Unified Presence and CCX.
Any good documents..
Appreciate your response.
Regards,
Manish.

Hi,
The easiest thing to do is get CUPC working with the agent's credentials. Once that is working, you know that the CUPS piece is right. The document supplied previously shows the very limited CAD configuration that is required. This should go fine once you get CUPC working with the agent's information.
Keep in mind that CUPC is not the same as CAD and there are important differences:
1. You need to add an Inbound ACL to the CUPS server to allow connections from the CAD PCs as CAD does not support Message Digest as CUPC does. This is CSCtb50109.
2. CAD does not escape special characters in the password, so use a password without special characters. This is
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
CSCtf25959.

Cisco Unified OS Administration Login

I am wondering if it is possible to change how to login to Cisco Unified OS Administration and Disaster Recovery System via the Web front end of Call Manager 6.1.3. Currently you need to login as Administrator to those 2 Web pages, but for Cisco Unified CM Administration, Serviceability, and Reporting you do not. I can login with my Call Manager account. It would be a lot easier if my and the other administrator could just use are Call Manager login for those 2 pages instead of the Administrator account. Is this possible?

No, OS admin and DRS systems are separate from Admin pages.
You need to authenticate to each one because of what privileges each one provides within the system and at which level they're.
HTH
java
if this helps, please rate

Is there any option on Cisco Unified CM Administration 9.1.1 to show caller ID number when using MOBILITY option?

Dear All,
I am using Cisco Unified CM Administration 9.1.1 and MOBILITY works fine.
However when somebody calls from external phone number into internal user number and MOBILITY option is ON and obviously, forwards the call for the user's cell.....in this case user can see only main company number, but not a caller number.
So, is there any option to change it?
Thank you

Go to the GW and run some debugs to find out exactly what you're sending, chances are, your telco is overwriting the original called number as it's nor part of your DID range.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Tool(s) in Cisco Unified CM Administration to support Identity Management (IDM)?

Hi,
In our "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, I can manually create and administrate users information.
But we do also have an identity Management (IDM) system in house, that creates users in Microsoft 2003 Active Directory and some sub-systems with the necessary rights they need.
It would be a lot easier, if our IDM system could create the user in our “Cisco Unified CM Administration System version: 7.0.1.11000-2" when they are created in the MS Active Directory, with the right username, first name, last name, department name and so forth.
Is there any tool that I can use to make this automatic import of user information?
Kind regards,
Carl-Marius

There are couple solutions.
You may integration CUCM with LDAP. Whenever you have a user created in LDAP, CUCM will synchronize that user into CUCM user database. Then you may assign different permissions for different LDAP users.
If you don't want to do LDAP integration, you may also consider using AXL to create users in CM database. AXL is an interface for 3rd-party software to read/write database.
Michael
http://htluo.blogspot.com

Cannot reset user vmail password with Cisco Unified CM Administration

We are using Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to me saying that they could no longer access voice mail, getting invalid pin. Ichanged the pin with the Cisco Unified CM Administration which accepts the new pin no problem but when we try it from the phone it doesn't work. Any ideas... Thanks Don

Hey Don,
Well, that's no good
There should be no correlation between resetting the user PIN
and the forwarding to voicemail.
Let's say that the user is @ DN/extension 5999.
In CUCM admin go to;
Device>Phone>Find List by Directory number> find 5999
on the DN config page look at the Call Forward sections (all, no answer, busy)
and make sure they are set to forward to VM (usually by using the VM checkbox)
If you need to, have a look at a working phone/DN for comparison
Cheers!
Rob
"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting"
-Springsteen

Cisco Unified CM Administration ver 7.1 date and time issue

We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes... Thanks Don

The latest release of CUCM 7.1.5 is 7.1.5.35901-1, so you can always try that. Link to download:
http://software.cisco.com/download/release.html?mdfid=282421166&flowid=45895&softwareid=282074295&release=7.1(5b)SU6a&relind=AVAILABLE&rellifecycle=&reltype=latest
The latest version of CUCM software is 9.1.2 with 10.0 coming out any day, thought those would be considered major upgrades and would require some planning, on i.e. ensure hardware compatibility, all software compatibilities, ELM licensing migration, etc.
HTH,
Chris

How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

Hi,
Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
Kind regards,
Carl-Marius

Hi Michael,
It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
Thank you for your fast and very precise help!
Kind regards,
Carl-Marius

Cisco unified presence IM

Dear All
i have question regarding im in cisco unified personal communicator i have confused case ,,, i have no ldp integration just added some users on call manager and when i login with cupc , must i add contacts manually and i cannt see status of users and also IM is not active i dont know why any one could reply about this problem , i have CCM7 and CUPS 7
everything wokrs fine Desktop and softfone just i need IM
i made IM service point to CUPS from CCM and subscribe all users phones but also when adding any users just tell me must be duplicate or not valid or maximum number exceeds i dont know why although no any contacts added to the list ????
and how CUPC IM works ??

JM table is the one that will have all the IM message (compliance) and Persistent Chat Room messages (if configured). If that table is not populated, there are configuration issue in PostGre.
Duplicate entries are due to one message going out from IM&P Server and another one coming in. This is ok and normal. You can try un-checking the checkbox for "Enable Outbound Message Logging" IM&P Server compliance settings - if it makes any difference

Cisco Unified Presence 8.5 High Availability problem

As we have two Cisco presence version 8.5 node as subcluster and configure as High Availability in a Subcluster . Once i click enable HA on the
presence server . its give the below messages as meniton
Primary server :
node state : Running in backup mode
node reason : peer down during initialization
Seconary server :
node state : unknown
node reason : High Availability not enabled.
Even All the service are up and running.
So please advice hightly appreciate for you response.

Hi,
Are both the CUP servers in different subnets/networks? If yes, then there is a setting under cluster topology page that has to be modified. It must be in Settings under cluster topology page. The default parameter will be 'MDNS'. This has to be changed to 'Router to Router' if the servers are in different subnets.
-Sankar
Sent from Cisco Technical Support iPad App

Cisco Unified Provisioning Manager - Error IPT-0600: Software - Failed to create subscriber

Hi,
When I create voice mail boxs for users I recieve the following error:
IPT-0600: Software - Failed to create subscriber xxxxxxx | Cause - org.apache.axis2.AxisFault: com.cisco.unity.cuals.CuDbException: Duplicate extension in partition: ObjectName = [EmbeddedKey=CustomType.O.
These are new users and the issue only started occuring today. I'm using CUPM version 2.1 and unity conenction Version 7.0.
Any help would be appreciated.
Thanks
Mike

Ok,
located the issue. A previous user with the same extension number still existed on the unity server. Not sure how this missed the deletion process.
Cheers
Mike

Cisco Unified Presence Administration Error

Similar Messages

Maybe you are looking for