Cisco Unified Video Advantages is not connected to any phone

There are CME 4.1.0.1, cisco video advantage 2.0, Cisco IP Phone 7940,Cisco VT Camera.
Video advantage can`t see phone.
But with CIPC it works correct.
In logs I saw an error:
CDP Driver Open failed with error-code 00000002
What is a way to connect phone to VT advantage.
What is the way to connect Video advantage with IP phone?
thanks in advance.

plug ur desktop/laptop to the back of the IP PHONE's data port~ to associate with the Video Ad

Similar Messages

  • CUVA advantage is not connected to any phone

    I am getting the following error message when is connect my CUVA to my Cisco IP communicator.
    my logitech videocam is not able to connect to the Cisco IP communicator.
    I am using Windows 7 Professional.
    CUVA is version 2.1.2.0.
    CDP driver version is 2.1(0.6).
    Cisco IP communicator is 7.0.1.0.
    CDP driver version is 2.0.1.02.
    Is there anything else I need to do to connect the video cam ?
    I have another colleague who is using Cisco IP Phone 7941 also facing the same problem after upgrading his operating system to Win 7.

    Hello,
    There should be a config enabled on the phone device , otherwise the phone will not be able to make video calls.
    in the device config , you should enable the video capability , it's by default disabled.
    If you want to check if it is available or not , there should be a sign for the video on the below right exactly up the last softkey.
    Amer

  • Camera for use with Cisco Unified Video advantage?

    Cisco is EOLing the Cisco Unified video advantage product that we thought would be a good fit for us to integrate video with some of our IP Phones.  I can still order the Video Advantage software until later in the year from Cisco but they have discontinued the Cisco VT Camera III that was previously used with this product. 
    They list the Logitech C920-C web cam as a replacement for this product, but it seems to be difficult to locate.  The realease notes say you can use a 3rd party camera but Cisco does not officially support it. 
    Has anyone used any third party cameras with Cisco Unified Video advantage and if so which would you recomend.  I was hoping to use the Logitech HD Pro Webcam C920 (the generic non Cisco version) but wasn't sure if it would work ok? 
    What do you think?  This will be using Unified Video Advantage 2.3. 
    Jim                   

    Hi,
    We have been using Video advantage v 2.1.2 with 7940 series phone since long, it works fine with almost all 3rd party camera`s and even with the inbuilt laptop cameras.
    v 2.3 is an enhanced version as compared the one which we are using. So i would suggest you to go ahead and try it with any good qaulity webcameras available in market.
    Further to add there are certain PC requirements which needs to be met, the same can be found in the below link.
    http://www.cisco.com/en/US/docs/video/cuva/2_3/release/notes/relnote_cuva23.html#wp1118706

  • Cuva is not connected to any phone.

    I am getting started with Video Over IP, so there is a lot to learn from it.  I have Cisco IP communicator working on a laptop and I just installed CUVA software on it.  The cuva software is reporting not connection to any ip phone.  I created to problem report, thus I like to find out how to start troubleshooting the issue.  Any input will be helpful while learning process.
    thanks,

    the video capabilities was
    disable.  enable it and reset ip communicator and
    both CIPC and CUVA started to communicate.
    thanks,
    Now, I just need to test video capabilities on our voice gateway.
    Remember I just started to work with video over ip, so I am new
    on all configuration.  Also, I will need to find some one who have the same capabilites, so I can start testing it.  In the mean time I am going to test it on the local net. if you like to voluteer let me know and I will schedule some time for testing it.
    thanks,

  • Cisco Unified Video Advantage - CDP Driver Not Installed- Windows 7 64-bit

    OK, so I'm sure the problem is Windows 7 64-bit, but after installing version 2.1.2 of Video Advantage, although everything goes in with no problem... it's not connecting to either my CUPC soft-phone or the attached video enabled Cisco IP Phone .  When I click on About, there is no version listed next to the CDP Driver Version.   When I go into Device Manager, I don't even see the Cisco CDP Driver listed.  There were no error messages during the install, but it would appear that the CDP Driver didn't get installed during setup.  This, of course, would explain why the phones are not being detected (since it uses CDP for discovery).
    Has anyone come across this and come up with a workaround ??

    If you download the PDF for Cisco Unified Communications Support for Microsoft Windows 7 that was published on 10-22-2009 you will see that currently there are no plans to support Video Advantage on Windows 7. I haven’t tried installing it on my 64 bit Windows 7 system yet but have you tried installing it using the program compatibility wizard? If that doesn’t work you can install the XP Mode which is a virtual machine of Windows XP that would allow you to install it there. The XP Mode virtual machine has worked for me on every app so far that doesn’t work with Windows 7.

  • Cisco Unified Video Advantage

    Hi, I have a CUVA-V2 camera. When I start a conversation over the WAN, I don't have any problem but in LAN we can't communicate... would you mind to help me?

    Check your video bandwidth set for the Region(s) assigned to the device pool(s) assigned to the phones.
    Brandon

  • HT2515 What happens if our video chat is not connecting with the other person?

    What happens if our video chat is not connecting with the other person?

    Hi,
    Not really enough info to help constructively.
    Which Version of iChat ?
    Is it iChat to iChat or iChat to Messages  (i.e Mac to Mac) or AIM (iChat) to PC AIM  (needs to be a compatible version)
    Is this AIM to AIM (Includes AIM valid Screen Names from certain Apple IDs) ?
    Is it Jabber to Jabber (this can only be done Mac to Mac in Messages and/or iChat) ?
    Do you get any failure  message ?
    In the Video Menu > Connection Doctor > Errors tab do you get any info ?
    NOTES
    As mentioned it is iChat to iChat or iChat to AIM on a PC if the PC has a compatible version (which is not the latest)  (where it lists iChat it also means Messages in Mountain Lion)
    It has to be either AIM to AIM IDs or Jabber to Jabber IDs
    It cannot be Jabber to some GoogleTalk Web Browser Login (or Facebook)
    It cannot be Jabber/Google Talk to the PC app called GoogleTalk
    Google released an PC only App that will use Jabber protocols for Video (Called Jingle)
    Their web Browser Plug-in also uses Jingle for Video and Audio chat but iChat and Messages use SIP (Session Initiation Protocol) to connect.  The two are not compatible.
    Facebook also run a  Jabber server and have apparently released their Own Plug-in  which can cause problems of it's own on a Mac.
    However you also cannot video to a Web Browser Login on Mac or PC
    If this is iChat 6 it does not Video on the Yahoo Accounts  (that is Text Only)
    This means it cannot Video to any version of Yahoo on Mac or PC or any Web Browser method.
    10:27 PM      Tuesday; February 19, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    When you get to the States, if you will be in an area with an Apple store for a couple days, call and ask about reserving an unlocked iPhone, it takes a couple days to get it in the store from what I understand.
    The current MBP 15" models are 2.2 and 2.4 GHz i7 machines.  There is a 17" with 2.5 GHz i7.
    The difference, in addition to the slightly faster cpu, is:
    2.2 GHz - Radeon HD 6750 M with 512 MB VRAM
    2.4 GHz - Radeon HD 6770 M with 1 GB VRAM
    Both have the same hard drive, 750 GB 5400 rpm, both have the same primary graphics - Intel 3000.
    So the difference is in the discrete grapics processor, important for heavy video work, heavy gaming...but will drain the battery a lot faster.
    You can get all the details on any Mac computer by going to http://www.everymac.com and click on the model and then scroll down to the exact machine of interest.

  • Updated my Ipod Touch 4g to iOS6 and now it will not connect to any internet that requires a password, and I need it for school. How can I get this fixed?

    I updated my Ipod touch 4g to iOS6 and it will not connect to any internet that requires a password on the browser. I really need my Ipod working for school, How can I fix this.

    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go toSettings>Safari and clear COokies, histor and data.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings.new iPod.

  • My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

    My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

    Have you tried SMC and PRAM resets?
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • My iPhone 5s won't turn off or on it keeps flashing the apple screen on off.  When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084

    Can anyone help me?  My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off.  When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084.  Can anyone help me correct this so I can start using my phone again.
    Thank you

    http://support.apple.com/kb/TS3221

  • My phone is not connecting to any wifi's what do I do?

    my phone is not connecting to any wifi's what do I do?

    http://support.apple.com/kb/TS1398

  • Could not connect to any JRun/ColdFusion servers on host localhost

    I am a new CF admin and I am trying to upgrade my Apache.  I am following the instructions in http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd9 .html but am getting an error.  Could not connect to any JRun/ColdFusion servers on host localhost
    I am running CF8 on Linux Suse and trying to  upgrade apache to version 2.2.22.  I am running apache on server-1 and ColdFuson on server-2.
    I tried running the following on server1:
    /data/jrun4/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
    but got the error.
    So then I tried installing apache on server-2 and running:
    /data/cf8/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
    I got the exact same error.
    CF is definately up and running.
    What am I doing wrong?

    Hi Kiran,
    Yes, Coldfusion is running and I have root access. You need
    to be root just to get the installer to run and to execute the
    Apache connector to produce the error I pasted into my message. My
    firewall is disabled, as is SELinux. I'm not sure how to "Write
    small program to check socket creation..."
    I'm reading through some of the tortured things Steven Erat
    had to do to get CF7 running on FC6 here:
    http://www.talkingtree.com/blog/index.cfm/2006/12/6/Running-ColdFusion-MX-7-on-Fedora-Core -6-Linux
    I suspect I'm running into one of these snags. I was just
    wondering if anyone knew if RHEL5 was officially supported yet, or
    more concisely, Apache 2.2?

  • When i plug in my iphone 5 to my macbook pro it says itunes could not connect to this phone. could not allocate a resource

    when i plug in my iphone 5 to my macbook pro it says itunes could not connect to this phone. could not allocate a resource

    Your iTunes updated?  

  • Can I use imessage with an apple ID which is not connected to any iphone / iPad ?

    Hay dude. I have just upgraded to Mavericks in my macbookpro. I have used an apple ID to log in to my imessage. That Apple ID is not connected to any iphone/iPad. Can I still use that apple ID to use my imessage feature and send free message to my friends for free?  If yes, Then how ?
    Your help will be highly appreciated. Thank you.
    Waiting to hear from you.

    Thanks Dude
    I have done the set up already but still unable to send message. I just can send message to myself. So I am asking here.
    Can I still use that apple ID to use my imessage feature and send free message to my friends for free?

Maybe you are looking for

  • Legend in not shown in report output for a piechart

    Hello, I have a piechart embedded in a report. In the graphics builder for the properties of the chart I have mentioned to show legends .It(Legend) is being shown in layout of graphics builder also . But when i run the report legends are not all bein

  • Mapping Errors in XI

    Hello, I have got the following errors in SXMB_MONI tcode. The details of the error messages which I found from Trace of XML messages given below: +Trace level="1" type="T">Interface Mapping http://capgemini.com/bc/SRM/OA/Receipts Imap_BAPI_CONFEC_XM

  • Workflow is blocked

    Hallo We have defined for one Step in Workflow several Users to the role, who can work on this step. If the User A of this role open the workflow in his workflow inbox and closes it without finishing this step, and the other users cannot see this wor

  • Syntax error in program SAPLRRI2

    The error occurred during the query process through connecting to a remote BW server. I don't think most of the notes provide adequate information to solve this problem. Folks, have you ever encountered with this error? I really appreciate if you can

  • Feature request: View layer comps in both Comments and Extract

    Good day, I'd like to see the layer comps dropdown duplicated and applied to the Comments panel of Extract, in hopes that when viewing layer comps over the web, there's better, faster performance when reviewing comps. Extract is wonderful, but not ev