Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller
Hi,
I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
I have two scenario, and I want to know if are normal or not:
1. If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
2. If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
Thanks a lot,
Best regards,
Omar YUNSI
So for the 2nd scenerio you would want to check what your Message Subjects were set to. For Unity 7 open Web SA, click Configuration and then Message Subjects. Make sure that the Outside Caller Message has %CALLERID% in it somewhere. The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
Try setting the Outside Caller Message to:
%U% %P% Voice Message from %CALLERID%
and that should get you your desired results.
The default Message subject is:
%U% %P% Voice Message from %CALLERNAME% (%CALLERID%). So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
Bryan
Similar Messages
-
Unity Connection Voice Mail Issue
Hi,
I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
I have run out of ideas...
===============================
Here is a call trace from an internal call:
CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 2003, AttemptForward
State, 1, 2003, State - AttemptForward.cde!Dummy
State, 1, 2003, Event is [NULL]
Application, 1, 2003, PHTransfer
State, 1, 2003, State - PHTransfer.cde!LoadInfo
State, 1, 2003, Event is [TrueEvent]
Application, 1, 2003, PHGreeting
State, 1, 2003, State - PHGreeting.cde!PlayGreeting
Display, 1, 2003, Call answered if needed
Display, 1, 2003, Playing greeting for Subscriber: hq2
Display, 1, 2003, No DTMF received
Display, 1, 2003, Playing greeting for Subscriber: hq2
State, 1, 2003, Event is [RecordMsgEvent]
State, 1, 2003, State - PHGreeting.cde!RecordMsg
State, 1, 2003, Event is [NULL]
State, 1, 2003, State - PHGreeting.cde!RunEditMsg
Application, 1, 2003, -->MessageEditing
State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 2003, Event is [EditMessageMenuEvent]
State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
State, 1, 2003, Event is [HangupEvent]
State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
State, 1, 2003, Event is [ManyEvent]
State, 1, 2003, State - MessageEditing.cde!SendMsg
State, 1, 2003, Event is [TrueEvent]
State, 1, 2003, State - MessageEditing.cde!ConfirmSend
State, 1, 2003, Event is [HangupEvent]
Application, 1, 2003, <--MessageEditing
State, 1, 2003, Event is [HangupEvent]
Display, 1, 2003, Idle
Display, 1, , Dialing (MWI) '2002'
Display, 1, , Idle
and here is a trace from an external (PSTN) call
Trying 142.100.64.13, 5000 ... Open
CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
Application, 1, 911, AttemptForward
State, 1, 911, State - AttemptForward.cde!Dummy
State, 1, 911, Event is [NULL]
Application, 1, 911, PHTransfer
State, 1, 911, State - PHTransfer.cde!LoadInfo
State, 1, 911, Event is [TrueEvent]
Application, 1, 911, PHGreeting
State, 1, 911, State - PHGreeting.cde!PlayGreeting
Display, 1, 911, Call answered if needed
Display, 1, 911, Playing greeting for Subscriber: hq2
Display, 1, 911, No DTMF received
Display, 1, 911, Playing greeting for Subscriber: hq2
State, 1, 911, Event is [RecordMsgEvent]
State, 1, 911, State - PHGreeting.cde!RecordMsg
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!RunEditMsg
Application, 1, 911, -->MessageEditing
State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
State, 1, 911, Event is [EditMessageMenuEvent]
State, 1, 911, State - MessageEditing.cde!PlayEditMenu
State, 1, 911, Event is [HangupEvent]
State, 1, 911, State - MessageEditing.cde!CheckMsgLength
State, 1, 911, Event is [NULL]
Application, 1, 911, <--MessageEditing
State, 1, 911, Event is [NULL]
State, 1, 911, State - PHGreeting.cde!AfterMsg
State, 1, 911, Event is [NULL]
Display, 1, 911, IdleSounds like one way audio from PSTN to your Unity Connection, couple of things to check:
1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
2. Make sure IP routing is OK between Unity and the voice gateway
HTH,
Chris -
IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem
Slide up from the bottom of your display to access the control panel.
Look for the button (should be at the top) that shows a crescent moon.
Tap that button. It should say "Do not Disturb: Off".
Then try it out and let us know if it worked. -
i have an iphone 4 for verizon and i am going to switch phones and get a droid motorolla 4g phone and the droid doesnt have a sim card. does my iphone 4 have a sim card that i can put in the droid? can i buy sim cards separately online for the droid?
Brandon2184 wrote:
The iPhone 4 uses a "Nano SIM"
The CDMA iPhone 4 does not use a SIM at all. There is no SIM slot. It is a pure CDMA phone. -
after I burn the files to dvd and load to view the name does not appear. How do I get the name listed to appear on the burn disk instead of the file number?
Naming the Photo - or giving it a title - is not the same as naming file.
How are you burning to dvd? With iPhoto? If so then the Title will be available in any app that understands basic metadata.
If you want the title available in the Finder - which does not understand photo metadata - then you'll need to export the file
File -> Export
In the resulting dialogue you'll see a heading for 'File Name'. Choose 'Use Title' from the drop down.
Regards
TD -
When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?
Connect your phone to computer, and sync like this. Check the boxes for the playlists, artists, albums you want to sync. Then click Apply. If you have enough space on your phone, you can choose Entire music library.
-
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz -
A process by the name of avgcmgr is loading the CPUs by up to 100 percent. At least 5 of them have appeared on the activity monitor. I've removed them with forced quit but they return! How do I permanently get rid of them? Three of these processes has now driven the CPUA temp to 194F.
RayHi Ray-
I'm having the exact same problem and have searched the web for hours looking for a solution (multiple spawned avgcmgr processes that consume cpu).
Did you find any solution?
Thanks so much!
Steve -
When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.
You have posted in the wrong forum. Try posting in the forum for the product you are trying to use.
Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
Forum links page:
https://forums.adobe.com/welcome -
My desktop with iTunes crashed, how do i get my music on my phone to the new Itunes on my laptop?
My desktop with iTunes crashed, how do i get my music on my phone to the new Itunes on my laptop?
Have you not got a backup of your content on external drives and/or CDs/DVD ? If so then you can copy that onto the computer and load them into iTunes. Have you tried doing File > Transfer Purchases in iTunes with the phone connected to see if any of you purchases transfer over ? If you are in the US then you should also be able to re-download past music purchases : http://support.apple.com/kb/HT2519
If you havn't bothered backing up your content then you could see if any of the utilities mentioned on this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893 -
how can i get my car to change the track when i am listening to the music on my phone through the line-in? is there a app i can download so it will recognize it? i have a vauxhal astra and the controls are on the steering wheel
First question is how old is Astra and you are in UK ( well you must be to have a Vauxhall)
Normally the Radio only has a line in socket to allow sound
You have two choices here either a simple cable with a 3.5mm Headphone plus at each end
or a cable with the headphone plug to place in car's line in plug and a wide Apple socket to fit the base of your iPhone This allegedly gives better sound but you have to control the iPhone for music selection
The equipment you need to control the iPhone from the Steering Wheel controls ,which I suspect currently handles radio /Cd tracks /stations ,is much more complicated it will have to be integrate with the Factory Fitted radio
and designed to manage the S/Wheel controls and translate to the iPhone .
Fitted into back of radio etc etc
If car is a recent Vauxhall there may be a kit available from them .but will not be cheap
Many imponderables you did not give much away in your OP -
I HAVE SET UP AN INCORRECT EMAIL ADDRESS. The call centre set up a new email address as the Username. I am unable to access the new account because the default on my phone is the email that is incorrect. How do I get the correct email as default??
Thank you for your help, much appreciated
Regards
Geoff -
How do I get the "Restriction" off my phone when I call so they know it is me calling?
How do I get the "Restriction" off my phone when I call so they know it is me calling?
Here you go. http://m-support.verizonwireless.com/clc/devices/knowledge_base.html?id=20203 http://support.verizonwireless.com/faqs/Features%20and%20Optional%20Services/faq_caller_id_block.html
-
When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.
And, what do I do if one of the harddisks on my Mini (2010, SL Server) starts misbehaving?Which security software (firewall, anti-virus) do you have?
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps and allows to delete the Firefox program folder. -
Unity Connection Voice Mail Only- NO MWI template
I am deploying a site with 8,000 mailboxes. 4,000 of those users are voice mail only without a telephone and will NOT require MWI.
I can manually remove the MWI setting from each mailbox, but I am looking at either a BATCH CSV setting or a TEMPLATE that I can turn OFF mwi when creating the users.
Any ideas?
TIAHi there,
This setting change is available via Bulk Edit
Bulk Edit> Messages> Disable MWI functionality for this user
Bulk Edit changed in 8.x from where it was accessed in 7.x.
Here's a clip that speaks to how this is run now. You first search and select all
the users you want to change and then choose Bulk Edit;
To Edit User Account Information in Bulk Edit Mode (some editing from original > this example
is for Caller Input settings but you'll see the point)
Step 1 In Cisco Unity Connection Administration, on the Search Users page, check the applicable user check boxes, and select Bulk Edit.
If the user accounts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable users. Then select Bulk Edit.
Step 2 On the Edit Caller Input page, change settings as applicable.
Note The Status message at the top of the Edit Caller Input page tells you how many user accounts are being edited. Also note that the page is populated only with the fields that you are allowed to edit in bulk mode, and that the fields available for edit also depend on whether all of the user accounts reside on the local server.
Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.
Step 4 Select Submit.
Step 5 If applicable, continue to change settings for these user accounts on the related pages available from the Edit menu. As you make changes on each page, select Submit before going on to the next page to make additional changes.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac090.html#wp1049545
Try a couple of test users first to come up with the exact plan.
If you prefer you can also use Bulk Edit via .csv
As a test here I tried the Bulk Edit and chose;
User with Voicemail > Users referenced in this CSV file > Next
This then allowed me to browse to an existing "basic" .csv that I had
used to create a test user recently when playing with BAT. In this .csv
I had one user named Bob Uncle with DN/ext 5126. So when I used this method
the Bulk Edit tool (smart puppy ) selected only Bob Uncle for my edit choices
and I was able to change the Disable MWI functionality for this user
Again, please try manipulating some test users to perfect
your methodology.
I have attached the test .csv I used
Cheers!
Rob
Attachments: buncletest Mailboxes.csv.zip (255 bytes)
"Show a little faith, there's magic in the night" - Springsteen
Maybe you are looking for
-
Hi Expers, Greetings to all!!! I wished to ask a question: I have PO with 10 line items. and during Goods receipt the vendor has given 1 free good as promo. I wanted to capture this. According to my knowledge I need to do GR with ref to PO and need t
-
On Step 1 of 7, the "Mailbox role: Client Access service," I got an error during installing: Error: The following error was generated when "$error.Clear(); Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, I
-
How can I check if I backed up my iphone
I have had to restore as new due to restrictions passcode being locked and not being able to delete any applications. The help info I received told me not to do a restore backup if I wanted to unlock the code. I had backed up the phone earlier, but c
-
In which table are stored the data of a set created by GS01?
Hi All, could anyone tell me in which table are stored the data of a set created by GS01? Thanks
-
ACD sleep indicator light not pulsing
I installed Windows Vista Home Basic on my Mac Pro yesterday. My display is a 20" ACD (aluminium). Since this Vista installation, the indicator light on the ACD does not pulse during sleep, but remains on steadily. The front indicator light on the Ma