Cisco Unity Call Manager 6.8

                 I have a legal requirement to identify calling activity from one extension to another involving a designated time frame. I was wondering if someone could give me a starting point to accomplish this
Chuck Davidenko
Voip Phone Specialist
CUSD200

Hi Chuck,
What you need is call CDR, it's a file containing all the call information route by CUCM/CME.
I recommend you to read this guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_0_2/car/caranrpt.html#wpxref63213
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

Similar Messages

  • Changing the Compact Flash on Cisco 2821 Call Manager Express

    Hello All,
    I'm gonna have to swap the compact flash on a Cisco 2821 who is serving as the Call Manager express and the Dialling Router.
    What's the best way of approaching this? As far as i know it doesn't have a second slot? And i just can't plug it in and copy everything from 1 flash to another.
    Must i copy all of the files on the flash to my tftp or? How can i be sure that everything will be copied to the new flash? I will be creating downtime i suppose? since when i'm copying towards the new flash the router will not properly work with the previous configuration

    So i figured out that i can use the archive tar /create command:
    To copy the entire flash towards TFTP:
    archive tar /create tftp://X.X.X.X/flash.tar flash:
    Now i will have to insert the new flash and probably format it first towards the correct file systems. Then i will have to use the next archive command:
    archive tar /xtract "Here i am unsure of the syntax, i want to be copying and extracting the tar I backed up from the old flash"
    After these steps are complete can i just reboot the router with the new flash card, won't there be any issues, since the startup config is on the NVRAM it will load the config properly, and i haven't seen any boot parameters but they shouldn't pose any issues since i'm not changing the flash slot.
    Thanks for your assistance

  • Cisco call manager pub & sub definitions

    I'm just beginning to learn Cisco VOIP. Can someone explain to me in a simple way what SUB & PUB mean in relation to Cisco Unity & call manager mean, and how it's used in the real world. My supervisor wants me to do a unity & UCM backup, and I'm not really sure what I'm doing
    Thank You very much.

    PUB = Publisher
    SUB = Subscriber.
    In simple terms, think of the Publisher as the manager of the CUCM cluster. Configuration changes are typically done on the Publisher, and it distributes those changes to the Subscribers. Subscribers perform call processing, phone registration, software conference bridge, music on hold, etc., and in some setups the Publisher will as well (depends on size and design, as Jaime mentioned).
    The Pub-Sub relation for Unity is a little different... which one handles voicemail traffic depends completely on how the connectivity with CUCM is configured. In some setups, they will be distributed voicemail traffic evenly, while in other setups the Pub may get all traffic until its ports are full, and then overflow to the Sub as a backup.

  • Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller

    Hi,
    I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
    I have two scenario, and I want to know if are normal or not:
    1.       If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
    2.       If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
    Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
    Thanks a lot,
    Best regards,
    Omar YUNSI

    So for the 2nd scenerio you would want to check what your Message Subjects were set to.  For Unity 7 open Web SA, click Configuration and then Message Subjects.  Make sure that the Outside Caller Message has %CALLERID% in it somewhere.  The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
    Try setting the Outside Caller Message to:
    %U% %P% Voice Message from %CALLERID%
    and that should get you your desired results.
    The default Message subject is:
    %U% %P% Voice Message from %CALLERNAME% (%CALLERID%).  So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
    Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
    Bryan

  • Cisco Unity Express 8.6.6 Voice Mail not deleting when e-mail with attachment deleted

    I have a Cisco Unity Communications Manager rel 9.1.2 that supports a remote location with a Unity Express rel 8.6.6 voice mail service module in the voice gateway to insure if WAN goes down the location still has voice mail. We have Voice Mail to E-Mail working. The problem is that when the e-mail with the voice mail is deleted the message stays in the Unity Express Voice Mail Box. All of our local users on the same Call Manager Cluster using a local Unity Connection Cluster rel 9.1.2 have the voicemails deleted when the e-mail is deleted.
    How can I resolve this issue?

    Found another post that referenced Cisco Bug ID CSCti37610.
    CUC plays message is from Unity Connection Messaging system
    Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
    Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
    Workaround:
    Restart the Unity Connection servers
    It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

  • Call manager installation

    i need to know how to install call manager on non cisco recomnerded hardware

    Hi,
    I can only re-iterate what Brandon has said and in no way use non-Cisco approved hardware for any live system. You will not get support and you are risking your business in doing so.
    If this is for your own use, for learning purposes only, then it can be done, but be prepared to spend some time in doing it.
    Follow the link already given.
    You will need to install Windows 2000 server, then run the registry edits, then install SQL 2000. You will also need to install a 'Cisco' version of the OS; (2000.4.7 or similar).Then install the Call Manager software. Your machine needs to have a decent sized hard disk and at least 512M of memory just to run the software.
    If you are learning, then I would also recommend 2 good books from Cisco Press
    Call Manager Best Practices &
    Troubleshooting Call Manager
    As you won't get any support from Cisco!
    You have been warned !!

  • Toll fraud traffic pumping on a Call manager express and unity express with an 800 toll free number.

    I have a customer with a call manager express and a unity express. They have an 800 toll free number that rings in to an auto attendant on the CUE. The problem is something called toll fraud traffic pumping. The caller, always from a different number, reaches the auto attendant by dialing the 800 number. They then somehow manage to keep the line connected for up to 12 hours by somehow staying in the auto attendant. I opened a TAC case and was informed that it is not in Cisco's hands to create a way to disconnect a call that is connected to the CUE. I need a way to have a call that stays in the auto attendant or voicemail after 3 to 5 minutes. I can't see a way to do it in the auto attendant script. Can someone help with a method that will disconnect the caller if they stay in the CUE for a period of time?

    Thank you for the response Jaime.
    That is what TAC told me. I am not familiar with TCL scripting and I have been looking at some guides on it. Any advice on a source to go to for assistance with that, possibly someone to help?

  • Call manager and Cisco IP phones

    I would like to know if it's possible to use Cisco IP phones in small environments, without having Call manager, or it's mandatory to have always CallManager if one wants to use the IP phones.
    Thank you

    You can use Call Manager Express, which runs on cisco 1751/60, 2600 and above routers. it can support up to 120 users. Cisco Unity Express will provide voice mail. this is a network module in 2600 and above routers. for more info, see www.cisco.com/go/ccme

  • Broken Cisco Unity / Unified Communications Manager association

    We have several Cisco Unity Connection users with the following status in their profiles:
    "This user's association to the co-resident Cisco Unified Communications Manager user has been broken.
    Please Click Here to reassociate the orphaned user."
    Clicking on the reassociation button does not show any of the users with broken associations, just a few resource users.
    Is there any way to reassociate these users with CUCM without having to delete them in Unity Connection along with their mailboxes?

    These are the steps I took to resolve the issue. I was particularly concerned about users losing saved messages in their voicemail. The posted solution did not give much detail on what to do.
    1) Create a new user in CUCM. For example, I have a user called 'John Doe' in the system. I created a new one called 'John Doe2'.
    2) After creating the user I associated 'John Doe2' to the phone in use by 'John Doe'. Then I set the Primary Extension as needed for that user. Hit the 'Save' button and verify that the 'Create Cisco Unity User' option shows up in the drop-down box in the right hand corner.
    3) Log into Cisco Unity Connection Administration, and select 'John Doe'. Click on the link to re-associate and select 'John Doe2'. This links the Unity user to the CUCM user.
    4) Log back into CUCM and select 'John Doe' from the user list. Remove all device associations from the user. Hit Save, then delete the user.
    5) Select 'John Doe2' and rename the user as 'John Doe'.
    These steps fixed my problem. I had to do it for all the users whose association was broken. One note to make is that the voicemail PIN is automatically reset to the default I believe, which is 0000. Other than that voicemail continues to work normally and users don't have to redo their greetings and such.

  • Integration with Cisco Call Manager?

    We have Cisco VOIP phones and we would like to continue managing calls with Cisco Call Manager.  We currently have voicemail on Cisco Unity.  We currently have Exchange 2010, but plan to start using Exchange 2013 soon.
    However, we would like to migrate voicemail service from Cisco Unity to Exchange Unified Messaging and also want to take advantage of most of the voicemail-related features of UM such as voice to text sent to email, voice mail waiting indicator light on
    the phones and sending voice mail audio attachments to email. 
    Is Exchange 2013 Unified Messaging compatible Cisco phones that are managed by Cisco Call Manager?
    We have 500 users and 2 Exchange 2010 servers (1 CAS and 1 Mailbox Server).  We now have a few Exchange 2013 licenses available in addition to our existing 2010 licenses that are already used on our existing 2 servers.  Can we keep the 2 existing
    Exchange 2010 servers as they are and create a new Unified Messaging server on  Exchange 2013 in the same environment or do we need to upgrade all the 2010 servers to 2013 if we use Unified Messaging on 2013?

    Hi Sachin,
    We do run a hybrid Callmanager to Nortel Meridian setup (works well).
    Here are some great docs;
    Cisco Unified CallManager
    Case Study: Nortel 61C PBX to Cisco IP Telephony Migration
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_white_paper09186a00801115e0.shtml
    Nortel Meridian PBX and Cisco CallManager Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008011888c.shtml
    Cisco Unified CallManager System Guide, Release 4.2(1)
    Cisco DPA Integration
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008055cd53.html
    Hope this helps! Let me know if you need additional info.
    Rob

  • Login to cisco CME as Administrator failed check your call manager express

    Hi Experts
    CME and CUE in one router. when i access the CUE from the IE , i put the CUE username and password and i get in. After that it asks me to enter CME username and password to run the wizard. whenever i put the password i get this crappy message "Login to cisco CME as Administrator failed. check your call manager express config" i have cheked my config many times. Please let me know if someone has faced this problem or any suggestion on this. today is the 2nd time i have faced this problem , last time I cud not solve it and end up wasting 6 hours...
    please help

    Hi friend,
    Here is the Prerequisites for Installing Cisco Unity Express Software. As David describes, may be the CME admin account is missing:
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/installation/guide/prereq31.html#wpmkr1112912
    Try this, and let us know.
    Best regards,
    - Adrián.

  • Can Unity VM support mulitiple Call Manager Clusters

    I have a 4.1.3 cluster that has Unified Messaging 4.0. Can I add a 5.1.3 Call Manager cluster and use the same Unity server? All the 4.1.3 users will migrate to 5.1.3 in the future.

    If you have done this before and have some good tricks to share please do.
    I found the answer, finally, on Cisco and am posting it here in case someone else has the same question.
    For Cisco Unified CallManager phone systems, note that Multiple Cisco Unified CallManager clusters
    can be added to an existing Cisco Unified CallManager integration in UTIM by adding new clusters to
    the integration. Because subscribers are associated with the integration and not with an individual
    cluster, adding a cluster to an integration does not count against the maximum integration total. For
    instructions on adding clusters to a Cisco Unified CallManager integration in UTIM, refer to the
    “Creating an Integration with a Second Cluster of Cisco Unified CallManager” section in the applicable
    Cisco Unified CallManager integration guide at
    http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_installation_and_configuration_g
    uides_list.html.

  • Hi Team, I wuold like to know if you have any app to make Firefox OS working with cisco Call Manager 10.5. Something like Cisco Jabber for Android or iOS.

    I'm interesting on buying a Firefox Smart Phone, but
    I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
    Something like Cisco Jabber for Android o iOS.
    Thanks,

    Hi Itech,
    If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
    You may also search Firefox Marketplace for an alternative solution:
    * [https://marketplace.firefox.com/]
    - Ralph

  • Error in Cisco call manager

    Hi, I just installed the IPCC exprss in my call manager publisher. No error during the instalation.
    But I got a error message in even log.
    Cisco desktop enterprise
    type: Information
    Event ID: 2
    SS3101 setup monitor failed connection failed, end

    Please make sure that the Jtapi and Rmjtapi service users are ok (users password must be consistant with what you have within CallManager)

  • Cisco Call Manager Administration Page Drop down menu not working

    I'm running the mobile app browser on my Xoom tablet and when I log into Cisco Call Manager Administration page I get the menu's but it will not pull down the options. The same issue happens in google chrome. I use your browser on my desktop and have no issues logging into Cisco Call Manager Administration page and getting the drop down menu's to appear but the mobile version of your browser is not working. Is there a work around? I tried changing the UAString to Desktop, iPad etc and the issue is still there.

    Thanks but I've tried all that. It happens in Chrome also. I've tried Opera and it works on that. I've read other forums and it looks like a Java script issue that Chrome and now Firefox Mobile cannot seem to resolve. My preference is Firefox and I'm sure as more tablets get out then this will be solved at some point. I just don't know how it is prioritized. I do know that in order for Androids to be viable in the business sector they need to address issues like these with a higher priority.

Maybe you are looking for