Cisco User Data Dump

When I manually run the Cisco User Data Dump, it creates the report without any issues. When I try to schedule the task or if I run it from the command line, "E:\Program Files (x86)\Cisco Systems\Unity Connection\User Data Dump\Unity Connection User Data Dump.exe" /Silent=[xx.xx.xx.xx], the file is created but never get data. I followed the instructions about saving the configuration, I checked enable to run whether logged in or off, highest privilege, the startup directory is E:\Program Files (x86)\Cisco Systems\Unity Connection\User Data Dump and I am in the administrative group. The request just seems to hang and waiting for some input. Is there any other line commands I can use or is there another "hidden" or non-published setting that I need to do?
If I look at the task scheduler, the Last Run Results say "The task is currently running (0x41301)".

I am having the same issue. Was there a solution in place for this? I am up to date with the UDD. I have reviewed the help documents again and again. glamarca Did you ever find a solution?

Similar Messages

User Data Dump

Hi been asked to produce a report by one of our customers which from searching the Web I should be able to get from using User Data Dump or Subscriber information dump.
I have installed both on a Windows XP SP3 machine with the IBM drivers.
When I try to run Subscriber Information Dump it says I can't run it on this version of Windows
While with User Data Dump is gives System error 27001
Which is either wrong username or password. Having checked through all the trouble shooting and what needs to be done for it to work I am sure that I am using the right username and password with the right permissions and right services running.
Anyone got any ideas of where I can look or try to get this one resolved?
Thanks
Rick

I have now gone back to trying to use cudli first, when I run it I get the following:
Any ideas what I have done wrong?

Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled

Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors         RAISE_EXCEPTION*
Date and Time          22.03.2010 06:50:11
|Short text                                                                                |
|    Exception condition "CUSTOMIZING_NOT_FOUND" raised.                                           |
|What happened?                                                                                |
|    The current ABAP/4 program encountered an unexpected                                          |
|    situation.                                                                                |
|What can you do?                                                                                |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                |
|                                                                                |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                |
|    A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception                      |
|    condition "CUSTOMIZING_NOT_FOUND".                                                            |
|    Since the exception was not intercepted by a superior                                         |
|    program, processing was terminated.                                                           |
|                                                                                |
|    Short description of exception condition:                                                     |
|                                                                                |
|                                                                                |
|    For detailed documentation of the exception condition, use                                    |
|    Transaction SE37 (Function Library). You can take the called                                  |
|    function module from the display of active calls.                                             |
|    -                                                                                |
|How to correct the error                                                                          |
|                                                                                |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                |
|                                                                                |
|    "RAISE_EXCEPTION" " "                                                                         |
|    "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19"                                                      |
|    "DSWP_GET_GLOBAL_CUSTOMIZING"                                                                 |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND"                                                    |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND"                                            |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                |
*|
|System environment                                                                                |
|    SAP-Release 701                                                                               |
|                                                                                |
|    Application server... "crsgrant"                                                              |
|    Network address...... "10.128.32.175"                                                         |
|    Operating system..... "Windows NT"                                                            |
|    Release.............. "5.2"                                                                   |
|    Hardware type........ "2x Intel 801686"                                                       |
|    Character length.... 8 Bits                                                                   |
|    Pointer length....... 32 Bits                                                                 |
|    Work process number.. 13                                                                      |
|    Shortdump setting.... "full"                                                                  |
|                                                                                |
|    Database server... "CRSGRANT"                                                                 |
|    Database type..... "ORACLE"                                                                   |
|    Database name..... "SM1"                                                                      |
|    Database user ID.. "SAPSM1"                                                                   |
|                                                                                |
|    Terminal.......... " "                                                                        |
|                                                                                |
|    Char.set.... "Czech_Czech.28592"                                                              |
|                                                                                |
|    SAP kernel....... 701                                                                         |
|    created (date)... "Apr 12 2009 22:43:15"                                                      |
|    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"                              |
|    Database version. "OCI_10201_SHARE (10.2.0.4.0) "                                             |
|                                                                                |
|    Patch level. 39                                                                               |
|    Patch text.. " "                                                                              |
|                                                                                |
|    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."                |
|    SAP database version. 701                                                                     |
|    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows                |
|     NT 6.0"                                                                                |
|                                                                                |
|    Memory consumption                                                                            |
|    Roll.... 8112                                                                                |
|    EM...... 4181184                                                                              |
|    Heap.... 0                                                                                |
|    Page.... 24576                                                                                |
|    MM Used. 873664                                                                               |
|    MM Free. 170296                                                                               |
|User and Transaction                                                                              |
|                                                                                |
|    Client.............. 001                                                                      |
|    User................ "SOLMAN"                                                                 |
|    Language key........ "E"                                                                      |
|    Transaction......... " "                                                                      |
|    Transactions ID..... "C27635DF574FF121B0470050569757E9"                                       |
|                                                                                |
|    Program............. "SAPLDSWP_UTILITY"                                                       |
|    Screen.............. "SAPMSSY0 1000"                                                          |
|    Screen line......... 6                                                                        |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in                              |
|     "DSWP_GET_GLOBAL_CUSTOMIZING".                                                               |
|    The main program was "RDSWP_NM_SYNC_USER_DATA ".                                              |
|                                                                                |
|    In the source code you have the termination point in line 22                                  |
|    of the (Include) program "LDSWP_UTILITYU19".                                                  |
|    The program "SAPLDSWP_UTILITY" was started as a background job.                               |
|    Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT"                                            |
|    Job Initiator.. "SOLMAN"                                                                      |
|    Job Number..... 00104000                                                                      |
Have you some solution or advice?
Best Regards
Jakub

Please could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue.

Script cannot find perl Data:Dumper module

Good day. I live in Australia and use a script called Shepherd to update my mythtv program listings.
After upgrading a couple of days ago (first time in about 6 months) Shepherd has stopped working.
Shepherd doesn't seem to find the perl data-dumper module, which is part of the base perl install.
All my packages are up to date as of this post, and I am on the current kernel -
uname -r
3.4.9-1-ARCH
~/.shepherd/shepherd --check
ERROR:
Mandatory module 'Data::Dumper' not found.
Please see the Wiki at <a href='http://svn.whuffy.com/wiki/Installation' class='bbc_url' title='External link' rel='nofollow external'>http://svn.whuffy.co...ki/Installation</a>
for details on how to install this module.
Shepherd is updating ~/.shepherd/output.xmltv (the listings information scraped from the net) but evidently needs the dumper module to post the data into MythTV.
I'm not sure if it has something to do with this, which I don't properly understand -
The current Arch Linux default perl installation installs updates to core modules into the perl core directories, creating file conflicts. Examples include modules such as Data::Dumper and version.
which is mentioned here.
I appear to have it installed as part of the perl base package -
sudo pacman -Qi perl
Name : perl
Version : 5.16.1-1
URL : <a href='http://www.perl.org' class='bbc_url' title='External link' rel='nofollow external'>http://www.perl.org</a>
Licenses : GPL PerlArtistic
Groups : base
Provides : perl-archive-extract=0.58 perl-archive-tar=1.82 perl-attribute-handlers=0.93 perl-autodie=2.10
perl-autoloader=5.72 perl-autouse=1.07 perl-b-debug=1.17 perl-b-deparse=1.14 perl-b-lint=1.14
perl-base=2.18 perl-bignum=0.29 perl-carp=1.26 perl-cgi=3.59 perl-compress-raw-bzip2=2.048
perl-compress-raw-zlib=2.048 perl-constant=1.23 perl-cpan=1.9800 perl-cpan-meta=2.120630
perl-cpan-meta-yaml=0.007 perl-cpanplus=0.9121 perl-cpanplus-dist-build=0.62 perl-data-dumper=2.135
So it seems Shepherd is suddenly not finding it for some reason, after the upgrade.
I tried installing the perl-data-dumper packages from the AUR (simple and concise) and neither of those made any difference.
I also tried installing the module with a cpan command (as root) but that gave me errors (which I'd rather not have to deal with unless I have to to fix this issue).
cpan
Terminal does not support AddHistory.
cpan shell -- CPAN exploration and modules installation (v1.9800)
Enter 'h' for help.
cpan[1]> install data:dumper
Reading '/root/.cpan/sources/authors/01mailrc.txt.gz'
sh: /bin/gzip: No such file or directory
............................................................................DONE
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'
sh: /bin/gzip: No such file or directory
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does not contain a Line-Count header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does not contain a Last-Updated header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
Subroutine AUTOLOAD redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 31.
Subroutine import redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 49.
Subroutine tv_interval redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 70.
.Could not split line["H\"rW{0M4K\cV1=YFH\cV\c^rqv\c?\c]hKUe\cGL)4:4\cH]C\cPW`_|#MU4}\c_\c_%\cQ\cN\cX8M}%e\cR|\cG-K\c?~\cAM_cREx#AnvAZDi\$\c\!h\cZ\cI^uG0 )>TQ}p{Q[Ah\cNIK\cV+R"]
Could not split line["-6W/GQp\cOm`>UwBP[5"]
Could not split line["\@\cPI\cW,(zY2]uA!fVegsf\\V\cGfL\cHY4ki\cFvLgY\\\c\Ed\cK\cTe-\cC0\@d!?\cSU/\\G8\cAt?(\cY.L\cZ\cBrtl~s[4\@\cF\cWu*D>I"]
Could not split line["hb\cSKA1\cCjX(w/K\cA"]
Giving up parsing your /root/.cpan/sources/modules/02packages.details.txt.gz, too many errorsReading '/root/.cpan/sources/authors/01mailrc.txt.gz'
sh: /bin/gzip: No such file or directory
............................................................................DONE
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'
sh: /bin/gzip: No such file or directory
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does not contain a Line-Count header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
Subroutine AUTOLOAD redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 31.
Subroutine import redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 49.
Subroutine tv_interval redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 70.
Warning: Your /root/.cpan/sources/modules/02packages.details.txt.gz does not contain a Last-Updated header.
Please check the validity of the index file by comparing it to more
than one CPAN mirror. I'll continue but problems seem likely to
happen.
Subroutine AUTOLOAD redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 31.
Subroutine import redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 49.
Subroutine tv_interval redefined at /usr/lib/perl5/site_perl/Time/HiRes.pm line 70.
.Could not split line["H\"rW{0M4K\cV1=YFH\cV\c^rqv\c?\c]hKUe\cGL)4:4\cH]C\cPW`_|#MU4}\c_\c_%\cQ\cN\cX8M}%e\cR|\cG-K\c?~\cAM_cREx#AnvAZDi\$\c\!h\cZ\cI^uG0 )>TQ}p{Q[Ah\cNIK\cV+R"]
Could not split line["-6W/GQp\cOm`>UwBP[5"]
Could not split line["\@\cPI\cW,(zY2]uA!fVegsf\\V\cGfL\cHY4ki\cFvLgY\\\c\Ed\cK\cTe-\cC0\@d!?\cSU/\\G8\cAt?(\cY.L\cZ\cBrtl~s[4\@\cF\cWu*D>I"]
Could not split line["hb\cSKA1\cCjX(w/K\cA"]
Giving up parsing your /root/.cpan/sources/modules/02packages.details.txt.gz, too many errorsTerminal does not support GetHistory.
Lockfile removed.
It says that the 02packages.details.txt.gz file is missing, but it looks like it's there -
ls /root/.cpan/sources/modules/
02packages.details.txt.gz 03modlist.data.gz
I thought I might uninstall and reinstall perl but I got dependency errors and I'm not game to force an uninstall unless I get advice to do so -
pacman -Rs perl
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: automake: requires perl
:: cdrkit: requires perl
:: ddclient: requires perl
:: git: requires perl>=5.14.0
:: groff: requires perl
:: gtk-doc: requires perl
:: hspell: requires perl
:: hyphen: requires perl
:: imagemagick: requires perl
:: lm_sensors: requires perl
:: mod_perl: requires perl
:: openssl: requires perl
:: perl-algorithm-diff: requires perl
:: perl-archive-zip: requires perl>=5.10.0
:: perl-class-factory-util: requires perl
:: perl-class-inspector: requires perl>=5.6.0
:: perl-class-load: requires perl
:: perl-class-methodmaker: requires perl>=5.10.0
:: perl-class-singleton: requires perl>=5.10.0
:: perl-convert-binhex: requires perl
:: perl-data-dump: requires perl>=5.006
:: perl-data-optlist: requires perl-scalar-list-utils
:: perl-datetime-format-builder: requires perl
:: perl-dbi: requires perl
:: perl-digest-sha1: requires perl
:: perl-email-date-format: requires perl
:: perl-encode-locale: requires perl>=5.008
:: perl-error: requires perl>=5.10.0
:: perl-fcgi: requires perl
:: perl-file-listing: requires perl>=5.8.8
:: perl-file-slurp: requires perl>=5.14.0
:: perl-font-afm: requires perl>=5.5.0
:: perl-html-form: requires perl>=5.8.8
:: perl-html-formattext: requires perl>=5.10.0
:: perl-html-parser: requires perl>=5.12.1
:: perl-html-tagset: requires perl>=5.10.0
:: perl-html-tree: requires perl>=5.10.0
:: perl-http-cache-transparent: requires perl>=5.10.0
:: perl-http-cookies: requires perl>=5.8.8
:: perl-http-daemon: requires perl>=5.8.8
:: perl-http-date: requires perl>=5.8.8
:: perl-http-message: requires perl>=5.8.8
:: perl-http-negotiate: requires perl>=5.8.8
:: perl-image-size: requires perl
:: perl-io-socket-ssl: requires perl>=5.10.0
:: perl-io-string: requires perl>=5.10.0
:: perl-io-stringy: requires perl
:: perl-libwww: requires perl>=5.8.1
:: perl-lingua-en-numbers-ordinate: requires perl>=5.10.0
:: perl-lingua-preferred: requires perl>=5.10.0
:: perl-linux-pid: requires perl
:: perl-list-moreutils: requires perl>=5.5.30
:: perl-lwp-mediatypes: requires perl>=5.6.2
:: perl-lwp-protocol-https: requires perl>=5.8.1
:: perl-math-round: requires perl
:: perl-mime-lite: requires perl
:: perl-mime-types: requires perl
:: perl-mozilla-ca: requires perl>=5.006
:: perl-net-http: requires perl>=5.6.2
:: perl-net-upnp: requires perl
:: perl-package-stash: requires perl>=5.8.1
:: perl-package-stash: requires perl-scalar-list-utils
:: perl-package-stash-xs: requires perl>=5.8.1
:: perl-params-classify: requires perl>=5.10.1
:: perl-params-util: requires perl>=5.5.30
:: perl-params-validate: requires perl
:: perl-parse-recdescent: requires perl>=5.10.0
:: perl-perl4-corelibs: requires perl>=5.006
:: perl-soap-lite: requires perl
:: perl-socket6: requires perl
:: perl-sub-exporter: requires perl>=5.6.0
:: perl-sub-install: requires perl
:: perl-sub-uplevel: requires perl
:: perl-term-readkey: requires perl
:: perl-test-warn: requires perl>=5.10.0
:: perl-text-iconv: requires perl
:: perl-timedate: requires perl
:: perl-tk: requires perl
:: perl-unicode-string: requires perl
:: perl-unicode-utf8simple: requires perl>=5.10.0
:: perl-uri: requires perl>=5.10.0
:: perl-www-robotrules: requires perl>=5.8.1
:: perl-xml-dom: requires perl>=5.10.0
:: perl-xml-namespacesupport: requires perl
:: perl-xml-parser: requires perl
:: perl-xml-regexp: requires perl
:: perl-xml-sax: requires perl
:: perl-xml-sax-base: requires perl
:: perl-xml-simple: requires perl
:: perl-xml-twig: requires perl
:: perl-xml-writer: requires perl
:: perl-xml-xpath: requires perl
:: perl-yaml: requires perl>=5.10.0
:: perl-yaml-syck: requires perl
:: rsync: requires perl
:: system-tools-backends: requires perl
:: webmin: requires perl
Any help would be greatly appreciated.
Thanks
belbo
Last edited by belbo (2012-08-26 00:33:52)

Thanks
Results as follows -
perl -MData::Dumper -e1
Perl API version v5.14.0 of Data::Dumper does not match v5.16.0 at /usr/lib/perl5/site_perl/XSLoader.pm line 95.
Compilation failed in require.
BEGIN failed--compilation aborted.
$ perl /mnt/Data/Scripts/Perl_Module_Check.pl wheremod Data::Dumper
Data::Dumper /usr/lib/perl5/site_perl/Data/Dumper.pm
Data::Dumper /usr/lib/perl5/core_perl/Data/Dumper.pm
I ran the full delete command after backing up the directories (there was a lot in them)
rm -rf /usr/lib/perl5/site_perl/* /usr/share/perl5/site_perl/*
This resulted in a different missing module -
$ sudo rm -rf /usr/lib/perl5/site_perl/* /usr/share/perl5/site_perl/*
$ ~/.shepherd/shepherd --check
ERROR:
Mandatory module 'List::Compare' not found.
I restored the backup and deleted only Data::Dumper but then got a missing XMLTV module -
$ ~/.shepherd/shepherd --check
$[ used in numeric lt (<) (did you mean $] ?) at /usr/share/perl5/site_perl/XML/Twig.pm line 7278.
$[ used in numeric lt (<) (did you mean $] ?) at /usr/share/perl5/site_perl/XML/Twig.pm line 7284.
$[ used in numeric lt (<) (did you mean $] ?) at /usr/share/perl5/site_perl/XML/Twig.pm line 7296.
ERROR:
Mandatory module 'XMLTV' not found.
Following this post, I did the following, which returned no results -
https://bbs.archlinux.org/viewtopic.php?pid=1110598
$ sudo pacman -Qml | awk '/_perl\/auto\/.+\.so$/ { print $1 }' | uniq
I then did the following -
$ sudo rm -rf /usr/lib/perl5/*
$ sudo pacman -S perl
warning: perl-5.16.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): perl-5.16.1-1
Total Installed Size: 48.33 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [#######################################################] 100%
(1/1) loading package files [#######################################################] 100%
(1/1) checking for file conflicts [#######################################################] 100%
(1/1) checking available disk space [#######################################################] 100%
(1/1) upgrading perl [#######################################################] 100%
$ ~/.shepherd/shepherd --check
ERROR:
Mandatory module 'XMLTV' not found.
Oops. Then saw your next post saying not to do that as you'd lose the vendor modules, which I did. I had backed up so I restored, so still have the vendor stuff.
In case its of any assistance, this is what my perl lib and share directories look like -
[ben@htpc ~]$ ls /usr/lib/perl5
core_perl site_perl site_perl.bak vendor_perl
[ben@htpc ~]$ ls /usr/lib/perl5/site_perl
Alien auto Data Encode encoding.pm Filter List Net perlfilter.pod SVN Term Unicode version.pm XML
Attribute Compress Digest Encode.pm FCGI.pm filter-util.pl Math Params Storable.pm Sys Time version version.pod XSLoader.pm
[ben@htpc ~]$ ls /usr/lib/perl5/vendor_perl
Apache Attribute Crypt DateTimePP.pm dbixs_rev.pl GD.pm Image ModPerl Package SNMP.pm Text Unicode YAML
Apache2 auto DateTime DBD Digest gv.pm JSON mod_perl2.pm Params Socket6.pm Tie Win32
APR Bundle DateTime.pm DBI FCGI.pm gv.so Linux Net qd.pl SVN Tk Xfce4
APR.pm Class DateTimePPExtra.pm DBI.pm GD HTML List NetSNMP RRDs.pm Term Tk.pm XML
[ben@htpc ~]$ ls /usr/lib/perl5/core_perl
arybase.pm Compress Cwd.pm DynaLoader.pm Fcntl.pm I18N List ODBM_File.pm perllocal.pod Socket.pm threads.pm
attributes.pm Config_git.pl Data Encode File IO Math Opcode.pm POSIX.pm Storable.pm Tie
auto Config_heavy.pl DB_File.pm Encode.pm Filter IO.pm MIME O.pm re.pm Sys Time
B Config.pm Devel encoding.pm GDBM_File.pm IPC mro.pm ops.pm Scalar Text Unicode
B.pm CORE Digest Errno.pm Hash lib.pm NDBM_File.pm PerlIO SDBM_File.pm threads
[ben@htpc ~]$ ls /usr/share/perl5/
core_perl site_perl vendor_perl
[ben@htpc ~]$ ls /usr/share/perl5/core_perl
AnyDBM_File.pm bignum.pm Config Digest.pm fields.pm IO Object PerlIO.pm Term utf8.pm
App bigrat.pm constant.pm DirHandle.pm File IPC open.pm pod Test vars.pm
Archive blib.pm CPAN Dumpvalue.pm FileCache.pm JSON overload Pod Test.pm version
Attribute bytes_heavy.pl CPANPLUS dumpvar.pl FileHandle.pm less.pm overloading.pm Safe.pm Text Version
autodie bytes.pm CPANPLUS.pm Encode filetest.pm Locale overload.pm Search Thread version.pm
autodie.pm Carp CPAN.pm encoding Filter locale.pm Package SelectSaver.pm Thread.pm vmsish.pm
AutoLoader.pm Carp.pm DBM_Filter English.pm FindBin.pm Log Params SelfLoader.pm Tie warnings
AutoSplit.pm CGI DBM_Filter.pm Env.pm Getopt Math parent.pm sigtrap.pm Time warnings.pm
autouse.pm CGI.pm DB.pm Exporter HTTP Memoize Parse sort.pm Unicode XSLoader.pm
B _charnames.pm deprecate.pm Exporter.pm I18N Memoize.pm Perl strict.pm unicore
base.pm charnames.pm Devel ExtUtils if.pm Module perl5db.pl subs.pm UNIVERSAL.pm
Benchmark.pm Class diagnostics.pm Fatal.pm inc Net perlfaq.pm Symbol.pm User
bigint.pm Compress Digest feature.pm integer.pm NEXT.pm PerlIO TAP utf8_heavy.pl
[ben@htpc ~]$ ls /usr/share/perl5/site_perl
Alien bigint.pm Bundle Class CPANPLUS DateTime ExtUtils HTML IPC Locale LWP.pm Math MythTV Object Try YAML
Archive bignum.pm CGI Compress CPANPLUS.pm Encode File HTTP JSON LWP lwptut.pod Module MythTV.pm Test WWW YAML.pm
Attribute bigrat.pm CGI.pm CPAN Date Env.pm Filter IO List lwpcook.pod Mail Mozilla Net Tie XML
[ben@htpc ~]$ ls /usr/share/perl5/vendor_perl
abbrev.pl bigrat.pl ctime.pl Error Font HTML LWP.pm open2.pl SOAP Time validate.pl
Algorithm cacheout.pl Data Error.pm ftp.pl HTTP Mail open3.pl stat.pl timelocal.pl WWW
Apache CGI Date exceptions.pl getcwd.pl Image Math Package Sub Tree XML
Archive CGI.pm DateTime fastcwd.pl getopt.pl importenv.pl MIME Parse syslog.pl Try XMLRPC
assert.pl chat2.pl Dist File getopts.pl IO Module Perl4 tainted.pl UDDI XMLTV
auto Class dotsh.pl finddepth.pl Git Lingua Mozilla pwd.pl Term Unicode XMLTV.pm
bigfloat.pl complete.pl Email find.pl Git.pm look.pl Net RRDp.pm termcap.pl URI YAML
bigint.pl Convert Encode flush.pl hostname.pl LWP newgetopt.pl shellwords.pl Test URI.pm YAML.pm
Any further assistance would be greatly appreciated.
Thanks
belbo
Last edited by belbo (2012-08-27 13:40:14)

Four GB of user data Limitation in Oracle 10g XE

Hi Mates!
There is one limitation in oracle XE which is:
It stores up to four GB of user data.
I am planning to migrate my database from Oracle 9i to Oracle 10g XE. My queries are below:
1. Is it possible to migrate from Oracle 9i to Oracle 10g XE?
2. I am confused regarding Four GB of user data Limitation. I don't understand nothing much about this. Presently If I prepare a dump (export) file in oracle 9i the size becomes around 250MB. If I switch to oracle 10g XE, how long will I be able to use my database?
Rgds,
Luther

Hi Mates!
There is one limitation in oracle XE which is:
It stores up to four GB of user data.
I am planning to migrate my database from Oracle 9i
to Oracle 10g XE. My queries are below:
1. Is it possible to migrate from Oracle 9i to Oracle
10g XE?this is a simple test case, you can install XE, export from 9i and import to XE. I did it before, it worked for me, but this does not mean it will for you, testing is only way to be sure.
There are lots of limitation of XE mentioned in the Licensing Information Guide.
http://www.oracle.com/pls/xe102/homepage?remark=tahiti
2. I am confused regarding Four GB of user data
Limitation. I don't understand nothing much about
this. Presently If I prepare a dump (export) file in
oracle 9i the size becomes around 250MB. If I switch
to oracle 10g XE, how long will I be able to use my
database?My XE is ~3,3 GB total, datafile + tempfile size, apex applications are working without problem. But consider all syatem + user data as a total, so 250 MB user data won't be a problem, most probably.
Rgds,
Luther

How to import a data dump into Oracle express

Hi
Thank you for reading my post
how i can import a data dump which is a dump of my Schema in oracle 10g into oracle database express ?
indeed it is just 20 tables and one sequence that i exported from oracle 10g and i want to import it into my oracle express 10g
thanks

Hi,
I
1) export the data from your source database XE
C:\WINDOWS\system32>exp userid=USER1@XE1 file=user1.dmp
2) in the target XE database you would have to recreate the same user, e.g. USER1
3) run imp on the same dump file:
C:\WINDOWS\system32>imp userid=USER1@xe2 file=user1.dmp full=yes ignore=yes
II
From DOS prompt make directory
DOS>md c:\oraclexe\tmp
DOS>cd c:\oraclexe\app\product\10.2.0\server\BIN
DOS>sqlplus SYS/Password AS SYSDBA
It is posible to be SYS/Password@SID AS SYSDBA
SQLPlus>CREATE OR REPLACE DIRECTORY XMLDIR AS 'C:\oraclexe\Tmp';
SQLPlus>GRANT READ, WRITE ON DIRECTORY XMLDIR TO property;
Go back to DOS prompt. There are two files - expdp.exe and impdp.exe in BIN directory.
DOS>expdp SYS/Password AS SYSDBA SCHEMAS=property DIRECTORY=XMLDIR DUMPFILE=property.dmp LOGFILE=property.log
From DOS prompt make directory
DOS>md c:\oraclexe\tmp
DOS>cd c:\oraclexe\app\product\10.2.0\server\BIN
DOS>sqlplus SYS/Password AS SYSDBA
It is posible to be SYS/Password@SID AS SYSDBA
SQLPlus>ALTER SYSTEM SET NLS_LENGTH_SIMANTICS='CHAR' SCOPE=BOTH;
SQLPlus>CREATE OR REPLACE DIRECTORY dmpdir AS 'C:\oraclexe\Tmp';
SQLPlus>GRANT READ, WRITE ON DIRECTORY XMLDIR TO public;
Go back to DOS prompt. There are two files - expdp.exe and impdp.exe in BIN directory.
DOS>impdp SYS/Password AS SYSDBA SCHEMAS=property DIRECTORY=XMLDIR DUMPFILE=property.dmp LOGFILE=property.log
There are so many treads about export and import in XE.
Konstantin

Problem while importing same data dump in 2 databases

Hi,
Oracle Version : 11G r2
I have installed oracle 11g and created a database db1. I created tablespace tbl1, user usr1, granted required permissions and imported oracle data dump into it using the impdp command.
Now, i want to import the same dump into another database. I created a fresh database db2. But the dump requires tablespace name as tbl1 and user name as usr1.
How do i import the dump into this new db2.
FYI - I tried a few things. I created db2. Logged into it using sqlplus system/pwd@db2 command. Created a new tablespace tbl1 and user usr1. I was able to create them successfully without errors like 'already existing'. But when i issue the impdp command, i get 'table already exists' for all tables in the dump. :(
Please tell me how to do this.
Thanks,
Anandhi

Hi,
When you import second fresh database, it means there haven't tbl1 tablespace. 1. you can create this tablespace in second database.
2. If you don't need create again same table space then you must use REMAP_TABLESPACE and REMAP_SCHEMA option of impdp
for example :
inpdp REMAP_TABLESPACE=TBL1:USERS REMAP_SCHEMA=USR1:USR2 DUMPFILE=DATA_PUMP_DIR:DUMP.DMPRegards
Mahir M. Quluzade

OIM 9.1 User data set

Hi,
In release note of 9.1 it is mentioned that :
Display of all OIM User attributes on the Step 3: Modify Connector Configuration page
On the Step 3: Modify Connector Configuration page, the OIM - User data set now shows all the OIM User attributes. In the earlier release, the display of fields was restricted to the ones that were most commonly used.
and
Attributes of the ID field are editable
On the Step 3: Modify Connector Configuration page, you can modify some of the attributes of the ID field. The ID field stores the value that uniquely identifies a user in Oracle Identity Manager and in the target system.
Can anyone please guide me how to get both things as I am getting only few fields of user profile in OIM-USer data set and also not able to modify ID field.
I am using OIM 9.1 on Websphere application server 6.1
Thanks

Unfortunately i do not have experience using the SPML generic connector. Have you read through all the documentation pertaining to the GTC?
-Kevin

What happens to my local user data? -newbie question sorry

Hi All,
Firstly apologies if this seems a dumb question, I've scoured the forums but I require something that fits my specific situation.
I've had a (my first) MacBook for about 9 months, built up a fairly healthy local user, setup just how I like it, MobileMe, iTunes, Chrome, iPhoto library, lots of other apps, etc etc and so forth.
I'm setting up a Mac Mini Server, and was wondering what I can do to join the new server, but take all my settings/downloads/iTunes etc with me... I don't want it all stored on the server, but I come from a Micro$oft Windows background. With MS, when you add a PC to a domain, login with the appropriate user account, you have a fresh profile, no settings, no files, no customisations etc etc is this also the case when I hit that Join Network Account server button on my Mac? Will I get a blank fresh account on my Macbook?
I'm guessing this must happen quite often as people start their way into Apple technology and build up a nice healthy local account before branching further into the Apple world...

The two laptops I use everyday have access to all the servers via my network account. It is set so that my user account is listed as having "no home" So I log into the laptop with my local user account with a UID of 501 but access all the network services via the go menu and my network account of the same name but with a UID of 1034.
For all other users in the company, if they are on a laptop, I use network accounts. The machines are managed to ask if the user wants to create a mobile account when they login. For permanently assigned laptop users, the answer is yes. This puts their home on the laptop and ties them to that machine. I use mobile account syncing to make sure their critical data is copied to the server for backup.
By having the machine ask to create the mobile account, users can answer no and login to their network home. The use of the laptop may be needed temporarily if a regular workstation is down.
Once in a while I will need to convert a local account to a network account. While a bit more laborious that setting it up correctly at the beginning, it can be done.
But I never let any user account have the UID of 501. I would set that up as the local admin account I use for installing updates and performing other maintenance. If needed, I would back up the user data and erase and re-install the OS.

Error message: User data is not indexed, yet. Index user data first

Greeting All,
Each time I try to index a 'Prepared' searchObjectConnector in the cockpit.. I get a message <
User data is not indexed, yet. Index user data first>. even that I ran the z_ESH_AU_UPLOAD_AUTH_RFC_720 report in R/3 system.. and checked the auth /user data in the admin cockpit.. and it was indexed..
1.any idea why I keep getting this error
2.any idea how can I clean the buffer or the message Queu.. my guess this might be not error but a q message..
3. any suggestion please
Thanks

Hi Areege,
I noticed that you created an OSS message on this issue. That was a good idea.
There is an answer for you in OSS from yesterday.
Kind regards, Klaus

Date Manipulation Depending on the various user date settings

hi,
I have a query.
In scripts, user date format setting is YYYY.MM.DD, values stored the table MHND are also in the format YYYY.MM.DD.
However when i pass the date values from MHND from form to subroutine pool the dates are available in the format DD.MM.YYYY in the subpool.
I want to calculate the diffenece between two dates. I have checked the function modules to calculate the differece betweent 2 dates those acccepts dates with type YYYYMMDD.
However i tried to bring my dates in from YYYY.MM.DD into YYYYMMDD format by using CONVERT_DATE_INTERNAL function module... That is not working as the user date format is YYYY.MM.DD and the dates are coming in subpool in DD.MM.YYYY format....
Please suggest me the approach the relavant function modules.... so as to manipulate the dates based on the user date settings.
Looking forward for your replies. Thanks in advance.
Regards,
Anuja.

hi anuja,
Try using the following formatting script symbol in your form routine
For example, you are passing the date into the subroutine then put K after the date field like below.
&date(K)& .
or
use SET DATE MASK : YYYY:MM:DD
Thanks,
Vamshi

Apple Configurator - Updating to iOS 6.1.2 removed saved user data

We are currently managing several classroom sets of iPads using Apple Configurator. When updating to iOS 6.1.2 on the Supervise tab, about two-thirds of one classroom (about 20 iPads) and another 4 out of 6 in a special education classroom lost all previously saved data (application data, documents, pictures, etc.) during the update. We have another classroom that updated approximately 30 iPads following the same exact steps using the same configurator computer and none were erased so we're having a hard time figuring out the issue.
When I was watching the configurator run through the status updates during the iOS update (e.g. downloading iOS, decompressing iOS, installing iOS) there was another step on the iPads that lost data which was "supervising device." All of the iPads were already supervised so I don't know why this step occurred or what caused it to happen. With the grouping of 6 iPads, the 4 that were erased immediately started decompressing and installing iOS while the 2 that saved user data went to the downloading iOS stage first. I wasn't monitoring the grouping of 30 as closely, but I did notice the "supervising device" stage on the iPads that lost all user data.

I think for the teachers you are going to have to tell them to copy their data off the device.
Suggest dropbox or other cloud storage. Could set up a WebDave server.
A simple and popular way to copy files.
http://wiki.dropbox.com
Could set up sync-ing so they would come back in he fall. I'd be cautios and do everythig simple.
For syncing pc or mac folders to iPad applications.
"Using SugarSync, you simply designate folders that you want to “sync” to the cloud and it keeps everything in sync anytime you make changes. This is the way cloud storage should be done and especially if you are using your iPad for buisness or for school."
The only potential downside is that so many apps for the iPhone/iPad come with Dropbox sync built in which makes it extremely convenient.
http://www.tcgeeks.com/best-ipad-cloud-sync-app/
Doug says:
"This can be done with Dropbox as well using one of the many Dropbox addons…"
http://wiki.dropbox.com/DropboxAddons

DOBJ.UPDATE_FAILED error while attaching adapters to Users Data Object

PROBLEM DESCRITPION:-
The following error occured while trying to attach entity adapters to Users Data Object (com.thortech.xl.dataobj.tcUSR) in Post-Update section.
Error Message: The security level for this data item indicates that it cannot be updated.
Update failed.
Update failed.
Error Keyword: DOBJ.UPDATE_FAILED
Description: Update failed.
Action: E
Severity: C
Kindly suggest to fix this issue.

Resolved the DOBJ.UPDATE_FAILED problem - I modified the dvt_data_level to 0 for dvt_post_update_sequence selective entries.
Able to attach the custom event handlers to Users Data Object - No more DOBJ.INVALID_UPDATE error!

Corrupt User Data Spinning Wheel Of Death Mac Palm Desktop Rev D

Hello,
My Treo 700p stopped working and Palm Desktop on My Mac will not open, import, or merge my user data files (current and backups). I've tried the apple-option Merge and import tricks to no avail. If it is set as the default user data, palm desktop will freeze on its splash screen and give me the spinning wheel of death. If i open, i get the message "Opening User Data One moment please..." with an eternal spinning wheel of death (SWOD). If i restore (apple-option merge) i immediately get the SWOD, If i merge, i am notified that the merge is successful, but then i get the spinning wheel of death before any data is displayed. I can open the userdata in textwrangler and see all of the phone numbers, notes, etc, but It seems impossible to parse into any format for reimporting or moving to my Pre. Are there any other tricks to opening the user data or recovering its contents. Any debug tools or software interrupts or anything I can do? Is there a way to open this stuff in a properly parsed format? Can User Data files be opened or imported by any other app? Also the Treo 700p gets power and the red light stays on but it never boots, perhaps there is a forensic tool that can recover the data?
Thank You for all your help and I would greatly appreciate any resolution.
David
Post relates to: Treo 700p (Sprint)
Message Edited by infdaze on 06-17-2009 08:29 PM

What BDAqua said. Get those crummy fonts you added off the drive. At least one of them must be so bad that's it's corrupting RAM every time the system tries to load it.
A Safe Mode boot removes the user cache files of the account you log into in Safe Mode, and clears Font Book's database. Normally, that would allow you to restart normally since Font Book's database is not rebuilt until you launch Font Book. That you can't even get that far means you have some really BAD fonts.
Boot into Safe Mode again. Make a new folder on the desktop and move all of the fonts you added out of the /Library/Fonts/ folded, or the Fonts folder of your user account. Whichever one you put them in.
Now you should be able to startup normally.

Error : CONNECT BY loop in user data

Getting CONNECT BY loop in user data:
Table X (sample data actually have 35K rows)
CODE             CASE              OLD_ID                NEW_ID            PERSON      AUTH
01              ab122         1234               0001             AU123     99393
07              vv353          7872               0919             FV982     78282
01              ab122         1982               9929             AU123     99393
04               hjsss         8839                8302            JK920     32320
01              ab122         0001               1982             AU123     99393
05              cg899         6728               32322           IKL020     65252
07              w353          0919                8282             FV982     78282
now I need to order this data comparing row values of old_id to new_id for each of the combinations of code, person, case
need output like below
Table X
CODE             CASE              OLD_ID                NEW_ID            PERSON      AUTH
01              ab122         1234               0001             AU123     99393
01              ab122         0001               1982             AU123     99393
01              ab122         1982               9929             AU123     99393
04               hjsss         8839                8302            JK920     32320
05              cg899         6728              32322           IKL020     65252
07              vv353          7872               0919             FV982     78282
07              w353          0919                8282            FV982     78282
to get this I am using:
--Query--
select * from table_x
start with old_id not in(
                                  select new_id
                                  from table_x
CONNECT BY old_id = PRIOR new_id
       AND   code   = PRIOR code
       AND   case   = PRIOR case
       AND   person = PRIOR person
--Query--
runs fine with sample data but the problem is when excute it with actual table that has 35K records..
Cause: The condition specified in a CONNECT BY clause caused a loop in the query, where the next record to be selected is a descendent of itself. When this happens, there can be no end to the query.
Action: Check the CONNECT BY clause and remove the circular reference.
Thanks,
AK

Hi,
CONNECT_BY_ISCYCLE is a pseudo-column that you can use in a CONNECT BY NOCYCLE query. It's separate from the CONNECT BY clause.
Try this:
select code, "CASE", person
,       SYS_CONNECT_BY_PATH (old_id, '/') AS path
from    table_x
where   CONNECT_BY_ISCYCLE = 1
start with old_id not in (
                                  select new_id
                                  from table_x
CONNECT BY NOCYCLE old_id = PRIOR new_id
        AND        code   = PRIOR code
        AND        "CASE" = PRIOR "CASE"
        AND        person = PRIOR person
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002#9362002

Cisco User Data Dump

Similar Messages

Maybe you are looking for