Cisco UT Lite script for windows 2012

Hi;
Will Cisco UT Lite script (for Prime LMS 4.2.4) will support with windows Active directory and domain controller on Windows 2012?
If yes can you please share Link, I try to search but unfortunitly I counldn't found. All document refere till Windows 2003.
Thanks for your cooperation.
Best regards;
Shoaib

Hi Shoaib,
there is no workaround. utlite script is supported on below platform only.
•Windows 2008
•Windows XP with SP2 or SP3
•Windows Vista
Thanks-
Afroz
[Do rate the useful post]

Similar Messages

  • Lauguage packs for Windows 2012. Where can I find them without using Windows updates? I have an MSDN account but don't see them

    Hello all,
    Where can I find the language packs for WIndows 2012 r2? I can't use Windows updates so get them. I'm trying to find a manual download. I have a MSDN account but I don't see language packs on the MSDN site. Are they located on the site? I think I need a
    win_srv_2012_64bit_multi_language_lp_oem. Will the 2008 r2 or Windows 7 language packs work?

    Hi,
    Please also take a look at the article below:
    Available Language Packs for Windows
    http://technet.microsoft.com/en-us/library/hh825678.aspx
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Adobe CS3Clean Script for Windows

    I have downloaded and unzipped the file located at:
    http://www.adobe.com/support/contact/cs3clean.html
    English/Japanese
    Download the Adobe CS3Clean Script for Windows (ZIP, 978 KB)
    Each time I extract the files, the
    AdobeCS3CleanReadMe.pdf
    will not open because it is corrupt.
    There is an additional file named:
    âNâèü[âôâAâbâvâXâNâèâvâgé+é-éóé-.pdf
    which I have not attempted to open for obvious reasons....

    I don't know for sure, but a good guess is that it's the same
    readme in
    Japanese. I don't have Japanese characters installed so
    perhaps that's why
    the gobbletygook?
    However, the AdobeCS3CleanReadMe.pdf in the download I just
    got is fine.
    Try downloading again .. if that doesn't help .. and your
    Adobe Reader is
    updated .. drop me a line and I'll send you the PDF from my
    download.
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "sbuck415" <[email protected]> wrote in
    message
    news:fg5q7a$l0s$[email protected]..
    >I have downloaded and unzipped the file located at:
    >
    >
    http://www.adobe.com/support/contact/cs3clean.html
    >
    > English/Japanese
    > Download the Adobe CS3Clean Script for Windows (ZIP, 978
    KB)
    >
    > Each time I extract the files, the
    > AdobeCS3CleanReadMe.pdf
    > will not open because it is corrupt.
    >
    > There is an additional file named:
    > ?N???[???A?b?v?X?N???v?g?+?-???-.pdf
    > which I have not attempted to open for obvious
    reasons....
    >
    >
    >

  • Cold Backup Script for windows

    Hi,
    I have the following script for windows
    set pages 0 lines 500;
    set heading off echo off feedback off verify off pagesize 0;
    select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP\ORADATA\' from v$datafile
    union all
    select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP' from v$controlfile
    union all
    select 'copy ' || member ||' c:\BACKUP\COLD_BACKUP' from v$logfile
    union all
    select 'copy ' || name || ' c:\BACKUP\COLD_BACKUP' from v$tempfile;
    exit;
    In the above script I have given COLD_BACKUP directory for Backup....But what i want is Dynamically it should create the Directory with timestamp in COLD_BACKUP Directory and copy the files to that directory..
    for example
    script should create like this
    c:\BACKUP\COLD_BACKUP\ORCL_11112007
    Like that..it should create the ORCL_11112007 directory and copy the files....
    how can i acheive this...I know we can do it in UNIX..
    But in windows..how we can acheive this...please help me

    You can try to adapt the following SQL*Plus script to create a directory:
    set echo on
    alter session set nls_date_format = 'DDMMYYYY';
    var dd varchar2(10);
    begin
    :dd := trunc(sysdate);
    end;
    set echo off
    spool mkd.sql
    set heading off
    select 'host mkdir ' || :dd from dual;
    spool off
    set echo on
    @mkd.sqlOutput is:
    dev001> alter session set nls_date_format = 'DDMMYYYY';
    Session altered.
    dev001> var dd varchar2(10);
    dev001>
    dev001> begin
      2  :dd := trunc(sysdate);
      3  end;
      4  /
    PL/SQL procedure successfully completed.
    dev001>
    dev001> set echo off
    host mkdir 08112007
    dev001> @mkd.sql
    dev001>
    dev001> host mkdir 08112007
    dev001>
    dev001>
    [pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Windows Assessment and Deployment Kit (ADK) for Windows 2012 Server

    Hi
    I need to download Windows ADK for Windows 2012 Server. The link mentioned on microsoft website "http://www.microsoft.com/en-in/download/details.aspx?id=30718" is not reachable. Can anyone please tell me, from where I can download Windows ADK for
    2012 Server.
    Thanks
    Manik Bansal

    Hi Johan, Hi Manik,
    Your reply with the link for the Windows Assessment and Deployment Kit (ADK) for Windows® 8 at http://www.microsoft.com/en-us/download/details.aspx?id=30652 has been very much appreciated.
    I have also found a new and updated link to the *NEW* Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 at http://www.microsoft.com/en-us/download/details.aspx?id=39982 that was released and published on 2013-Oct-17.
    Please note that this ADK can be used with Windows Server 2012, but there are some important differences between the Windows 8 ADK and the Windows Server 2012 ADK. The TechNet summary of the ADK may be explored at the link http://technet.microsoft.com/en-us/library/jj200116.aspx
    The details of the ADK for Windows 8 may be explored at the link http://go.microsoft.com/fwlink/?LinkId=248647
    Thank you,
    Michael C.

  • Admt tool for windows 2012

    Hi
    Please let me know if released ADMT for windows 2012.
    I need to forest migration from w2k8 to 2012
    http://social.technet.microsoft.com/Forums/en-US/winserverMigration/thread/6f9010f4-084d-41ca-b8ff-f0919c488cb5

    From an email from Mark Parris, fellow MVP
    Go to:
    https://connect.microsoft.com/directory/non-feedback
    click on Browse the full Product Directory. Then click on the last link on the left nav bar entitled View Connect products currently not accepting feedback.
    From there (which is the first URL I note above), you’ll see Azure Active Directory Customer Connection listed and can join.
    And finally you are allowed to download.
    J
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • Officejet 6830 support for windows 2012

    Can anyone assist with installation of HP officejet pro 6830 drivers/software on Windows 2012.   The HP literature states that Windows 2012 is supported but here are no available drivers available for Windows 2012.  The Windows 8.1 and 2008 drivers do not install in Windows 2012.  Any assistance is appreciated.
    This question was solved.
    View Solution.

    You can download the HP Printer Software for Officejet 6830 under the Win Server 2008 64 bit option :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-131212-2&cc=us&dlc=en&lc=en...
    Please note that the installers for enterprise solutions must be extracted from the webpack and run from a command line
    Here's the link to more details on how to install on Win Server environment for your reference : 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03351547
    We are in the process to update the HP website to reflex the correct info.
    Regards
    If my answer was helpful please click on the "Thumbs up" button on the left to say "Thanks".
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Baseline for Windows 2012 R2?

    Hello,
    Does anybody know when the Baseline for Windows 2012 R2 will be available? We want to start using 2012 R2 but without a Baseline we will run into compliancy issues
    Thanks in advance!
    Coen

    Hi,
    If you are looking for Windows Server 2012 Security Baseline, please refer to the below links:
    Windows Server 2012 Security Baseline
    http://technet.microsoft.com/en-us/library/jj898542.aspx
    Secure Windows Server 2012 R2 and Windows Server 2012
    http://technet.microsoft.com/en-us/library/hh831360.aspx
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • Cisco Connect Cloud - Apps for Windows Phone.

    Are you planning to make apps for windowsphone?

    Hi! So far, what's indicated on cisco's site is that the mobile apps are only available for iOS and andoid only. But I came across this site: http://news.cnet.com/8301-17938_105-57460150-1/cisco-woos-developers-adds-802.11ac-support-as-connec... and quoting one sentence: "Cisco says this is just the beginning and that there will be hundreds of mobile apps that take advantage of the Cisco Connect Cloud platform, making home networking not just more convenient to use but also more fun and offering features that many people may not have imagined possible before."  With this statement, cisco might develop cisco connect cloud apps for windows phone.

  • Script Issue for Windows 2012 R2 or 2012 Operating Systems

    I have this login script that works on older operating systems but fails to run under Window 2012 R2 for users when the login; its setup as a active directory domain user logon policy: Im not much with scripts ..any help you could provide would be great
    Option Explicit
    Dim objFSO, objFolder, strDirectory, WshS, WSHSell, strDriveLetter, intRunError, objShell, strUser
    Dim objNetwork, usrProfile, strProfilepath, usrName
    Set WshS = WScript.CreateObject("WScript.Shell")
    'Expand Environment
    'Create const's to spare time and place
    usrProfile = WshS.ExpandEnvironmentStrings("%UserProfile%")
    usrName = WshS.ExpandEnvironmentStrings("%UserName%")
    ' Message to prove my string contains the path to my profile
    strProfilepath = usrProfile
    ' CREATE FOLDERS ON USER SHARE IF IT DOES NOT EXIST AND ASSIGN RIGHTS
    strDirectory = "\\hadfs1.pmhadley.com\users\" & usrName
    ' Create folder in share.
    Set objFSO = CreateObject("Scripting.FileSystemObject")
    If Not objFSO.FolderExists(strDirectory) Then
    Set objFolder = objFSO.CreateFolder(strDirectory)
    ' Grant permissions to user in the folder.
    Set objShell = CreateObject("Wscript.Shell")
    intRunError = objShell.Run("%COMSPEC% /c Echo Y| cacls " & strDirectory & " /t /c /g " & usrName & ":C ""Domain Admins"":F", 2, True)
    strDriveLetter = "U:"
    Set objNetwork = CreateObject("WScript.Network") 
    objNetwork.MapNetworkDrive strDriveLetter, strDirectory 
    ELSE IF objFSO.FolderExists(strDirectory) Then
    strDriveLetter = "U:"
    Set objNetwork = CreateObject("WScript.Network") 
    objNetwork.MapNetworkDrive strDriveLetter, strDirectory
    END IF
    END IF
    It works if I run the script on the server from command prompt; but Remote Desktop sessions dont show the mapping created

    Hi,
    Get rid of the script and set up your user's home folder like so:
    https://support.microsoft.com/en-us/kb/320043/
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Maximum LUN size for Windows 2012 server

    Dear All
                    What is the Maximum size of the LUN that can be provided to windows 2012 server. Earlier it was 2 TB for windows 2008 server has the policy changed or it is still
    the same.
    Regards
    Zubair

    Hi,
    Would you please let me know if your OS version is Windows Server 2012 or Windows Server 2012 Essentials? If it’s Windows Server 2012, you’d better ask the question in the File Services and
    Storage forum. We will get a better assistance there.
    File Services and Storage
    http://social.technet.microsoft.com/Forums/en-US/winserverfiles/threads
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • [Oracle 9i Lite] Request for Windows CE 3.0 PowerPC 821 release

    After 10 days, we have unfortunately received no answer to our request mails.
    We try an ultimate post in this forum, hoping that Oracle representatives are watching AND answering.
    Laurent PICARD
    <[email protected]>
    Dear Oracle Development Team,
    Hitachi & Cytale are launching a project with the INSEE (National Institute of Statistics and Economic Studies), to equip their enquirers with a mobile platform (the Cybook Pro), to update national databases on a daily basis (e.g. the French Consumer Price Index).
    The INSEE considers integrating Oracle 9i Lite solution into their software architecture.
    Before moving developments any further, we need to know:
    - whether you are willing to compile Oracle 9i Lite for our platform;
    - if so, when the release can be expected for tests and development.
    Notes:
    - The Cybook Pro runs Windows 3.0 on a PowerPC 821 (PPC821).
    - The ODBC module of Oracle 9i Lite will be used.
    - If needed, we can provide you with a PPC821 SDK.
    - We (Cytale & INSEE) are willing to help if tests need be done.
    - The INSEE will have their choices finalized by the end of May, feasibility and development tests must be fully completed before that date.
    Companies working on the project are:
    - Hitachi <http://www.hitachi.fr>
    - INSEE <http://www.insee.fr>
    - Cytale <http://www.cytale.com>
    We are looking forward to hearing from you as soon as possible.
    Best regards,
    Laurent PICARD
    <[email protected]>

    This is caused by a bug in Oracle's ODBC API for Windows CE in
    the dbaccess.cpp header file. It can be fixed by doing the
    following;
    at (or about) line 155;
    Inside For Loop, before
    'if(::SQLGetData' statement.
    memset(&g_szBuff, 0, sizeof(g_szBuff));
    This will reset the memory for the data column after it has been
    read.
    Oracle would have to implement this fix and then recompile mSQL
    in order for mSQL to display NULL values correctly.
    Cheers,
    Allen.
    >
    Actually the problem is not (only) in mSQL as we are using the
    API to view the data and are seeing the same result. We suspect
    the problem is in the API which mSQL is probably also using to
    access the data.
    Allen.

  • Script for Windows

    Hi Experts,
    We have Goldengate environment and replicating the data between on source to Many target environments , both source and target environments are Oracle only,  To monitor the process and exceptions we have used shell scripts on both the environments,
    now we have new requirment for replicating the data between oracle to sql server , we have install goldengate on windows NT server for target environment , But in source we are using shell script for monitirong manger process and extract process , like if mgr or extract process is abended immediatly we will get the alert mail through mailx functionality, Now we need to use the same approach for windows sql serer as well , can any one please guide how to achive the monitoring requirment in windows environment as like unix/solaris, is there any option available in windows to writing the scritps like shell also sending the alert mails, Kindly suggest on this.
    Thanks in Advance.
    AT

    I get the scheduler to run this batch file, dbcgen.bat
    rem Set Correct Starting Directory
    D:
    cd \gw8\admin\utility\dbcopy\win32
    cscript //NoLogo dbcgen.vbs > dbcrun.bat
    dbcrun.bat
    and the dbcgen.vbs does the rest
    ' Script to generate DBCRun.Bat file
    ' Result needs to be something like this
    ' D:\gw8\admin\UTILITY\DBCOPY\WIN32\dbcopy.exe /i 12-01-2010 /w n:\gw5po
    c:\gw5back
    Dim cDate
    cDBCPath = "D:\GW8\Admin\Utility\DBCopy\Win32\DBCopy.exe"
    cSrcPath = "N:\GW5PO"
    cTgtPath = "C:\GW5Back"
    dDate = Now() - 1
    'WScript.Echo dDate
    cDay = cStr(Day(dDate))
    if Len(cDay) = 1 then
    cDay = "0" & cDay
    end if
    'WScript.Echo cDay
    cMonth = cStr(Month(dDate))
    if Len(cMonth) = 1 then
    cMonth = "0" & cMonth
    end if
    'WScript.Echo cMonth
    cYear = cStr(Year(dDate))
    'WScript.Echo cYear
    cDate = cMonth & "-" & cDay & "-" & cYear
    'WScript.Echo cDate
    WSCript.Echo cDBCPath & " /i " & cDate & " /w " & cSrcPath & " " & cTgtPath
    set cDate = Nothing
    You can add/alter the various startup flags to suit yourself
    Cheers Dave
    Dave Parkes [NSCS]
    Occasionally resident at http://support-forums.novell.com/

  • Subnet config and switch layout for windows 2012 ISCSI server

    I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets?  Also do you link the switches together when
    designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides.  However, I have not come across a best practices guide for deploying Server 2012 ISCSI.

    I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets?  Also do you link the switches together
    when designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides.  However, I have not come across a best practices guide for deploying Server 2012 ISCSI.
    For iSCSI you typically create a separate subnets around physical NICs you use for iSCSI traffic (assuming they are used by iSCSI target for MPIO of course). Here are few guides on how to do that (some for Windows Server 2008 R2 but you can ignore that fact
    as target itself did not change much and concepts are still the same). See:
    Configure iSCSI MPIO on Windows (full)
    http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx
    (make sure you have at leas one connection before you try to enable MPIO)
    Setting up a Target and Initiator
    http://www.server-log.com/blog/2011/7/26/setting-up-an-microsoft-iscsi-target-and-initiator-using-mpi.html
    You need however be aware of a couple of facts... 
    1) MSFT does not see much future in iSCSI and is replacing it with SMB3 where it can. So if you want to use iSCSI to provide shared storage to your guest VMs you need to use shared VHDX hosted on SMB3 share, see:
    Shared VHDX for guest VM Cluster
    http://technet.microsoft.com/en-us/library/dn265980.aspx
    If you plan to use iSCSI to host CSV and VM images there you again can use SMB3 share, see:
    Hyper-V over SMB
    http://technet.microsoft.com/en-us/library/jj134187.aspx
    That's both simpler to manage (you don't configure anything except teaming for NICs to enable SMB Multichannel and create a shared folder in a few clicks) and faster: MSFT iSCSI target is not cached @ server side while (OK, Hyper-V ovens VMs in a pass-thru
    mode but other users typically don't do that). SQL Server is the same as Hyper-V in terms of SMB3 support, Windows clusters support SMB3 share as a witness and so on.
    2) That's a single point of failure. Think about using SoFS instead of a single SMB3 share and think about clustering your target (you'll need a separate fault tolerant back end of that) to increase uptime. See:
    MSFT iSCSI Target Failover Cluster
    http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
    Good luck! :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Maintainence Mode script for SCOM 2012

     Hi All
     Currently we use PowerShell script to place servers in maintenance mode (SCOM 2007 ). While executing the script we specify a text file which contains list of agents.
     Am looking for same type of script which can work for SCOM 2012. After searching I got the MM tool for placing agent or group in Maintenance. Instead I would need the script to get agents from text file. Also it should check if agent is part of
    cluster and place related cluster also in MM.
    Let me know , if any one can help me here.
    Regards
    Madhavi

    Hi,
    The below two links should be helpful for you, please go through them:
    SCOM 2012: Put Cluster Node and Cluster Object in Maintenance Mode
    OpsMgr 2012: Group Maintenance Mode via PowerShell (the way it should be)
    http://www.systemcentercentral.com/opsmgr-2012-group-maintenance-mode-via-powershell-the-way-it-should-be/
    Please Note: Since site is not hosted by Microsoft, the link may change without notice. Microsoft does 
    not guarantee the accuracy of this information the web.
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for