Cisco video surveillance operations manager error

Hi!
Does anyone know What does mean "HttpHandler. 11391: critical coredump" error in cisco video surveillance operations manager?

Okay, well... right away; there is a very serious issue concerning the fact that mysql no longer appears installed on the server:
01-vssoftware.txt
Video Surveillance Operations Manager
MYSQL:              !! MySQL is not installed and is required
Which would indicate the root of your issues.  It appears something may have actually removed the package.
I also noticed from the roothistory that you've installed some other third party tools and executed what I assume are some scripts that appear to remove things?  Perhaps check there?
My recommendation is to pull a valid backup and perform a recovery with the Cisco Recovery DVD.  If this is not an option, you'll likely need to open a TAC case to determine how mysql has been broken, and how to correct it.
Best of luck,
Scott.

Similar Messages

  • Video surveillance operations manager 6.3.1

    We continue to have issues with the camera feed on the video surveillance operations manager freezing.  The camera will say it's up.  If we web directly to the camera, the feed is normal.
    The only solution we found is to hard reboot the server.  This has just recently started happening.  Is this a known issue?

    I can no longer seem to find an online copy of the original Support Devices for VSM 6.3.1 PDF, but I do have a local copy.
    The closest I can find online (and likely nearly identical) is for 6.3.2MR2 at:
    https://www.ciscoet.com/resource/vsm-632-mr2-supported-devices-list
    I'll attempt to attach the 6.3.1 PDF to this response, but I'm not sure if it's allowed.
    Cheers!

  • Cisco Video Surveillance Manager Software question

    Hi,
    We have installed Cisco Video Surveillance Manager and configured it for basic function. My question is quite simple but i had problems to understand how to install the cisco software in order to monitor the IP cam network. Can anyone provide some basic guidelines about how to install the monitoring software? Also Windows Explorer9 has problems for windows 7 is there a solution about the web monitoring?
    Thank you in advance

    Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
    The software that you are asking about is an Enterprise software. Please try asking your question in this group.
    https://supportforums.cisco.com/community/netpro/security/physical-security
    Thanks
    Eric Moyers
    Cisco Network Support Engineer
    SBSC Wireless and Surveillance SME
    CCNA, CCNA-Wireless
    1-866-606-1866

  • Cisco Video Surveillance Manager, Release 7.5

    Please tell me how to install the software on openSuse?
    I downloaded and installed all with of the archive:
    Cisco Video Surveillance Manager 7.5.0 upgrade software for SUSE Linux Enterprise Server 10 SP1 (i586)   
    Cisco_VSM-7.5.0-31i-sles10.zip
    But the program still does not start, I think there is not enough what that file.
    Which files are missing and where they I can take?
    Unfortunately the installation instructions exactly for version 7.5, I have not found.
    Version 6.3 got up and installed without difficulty.

    Hi,
    the file you are using is upgrade file, you need to use the .OVA file to deploy new VSM 7.x on your UCS blade.
    below link will lead you to the OVA download for 7.X, please download the file depending on the UCS blade you are using. C series or B series.
    https://software.cisco.com/download/release.html?mdfid=282976740&flowid=46918&softwareid=281933881&release=7.5.1&relind=AVAILABLE&rellifecycle=&reltype=latest

  • Problem whit snapshot on Cisco video surveillance manager 6.3.2

    I have problems with cisco video surveillance 6.3.2.
    when making a snapshot, the file is saved but can not be displayed on the computer, anyone know why?

    we don't have release notes for 7.6 hotfix but BU has posted a Read me file for the same. you could find it on cisco.com, find the attached snap shot to access the read me file.
    Let me know, if you have any questions.

  • Cisco Video Surveillance 3520 software recording capabilities

    Hi,
    i want to buy a single Cisco Video Surveillance 3520 camera, i know that there is a free software which come with this camera, but i am not sure if that software has recording capabilities, please can anyone verify if it has, or i have to buy some additional software ?!!

    Yassar,
         Per Cisco's white sheet on this model:
    Local storage. Video data can automatically be recorded to a microSD card when the camera loses network connectivity.
    But to stream parent proxies to a seperate storage device you need a media server to capture the RTP packets after HTTPS and RSTP has set up the connection.
    http://www.cisco.com/c/en/us/products/collateral/physical-security/video-surveillance-3000-series-ip-cameras/data_sheets_c78-723172.html

  • Cisco Prime Unified Operations Manager 8.7 Server Requirement

    I need a clarification regarding the Windows Server OS requirement for installing Cisco Prime Unified Operations Manager 8.7 with Service Monitor.
    The data sheet says Win 2008 (R1) Enterprise edition.
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/data_sheet_c78-697491.html
    The installation guide says Win 2008 (R1) Std or Enterprise.
    https://www.ciscosystems.net/en/US/docs/net_mgmt/prime/unified_operations_manager/8.7/install/guide/cuom_installguide.book.pdf
    My server is running on Windows 2008 (R1) Standard Edition, will I be able to install Cisco Prime UOM 8.7 on this server????
    The hardware meets the requirement. I am confused only with the Windows Server OS part as both documents are contradicting.

    I need a clarification regarding the Windows Server OS requirement for installing Cisco Prime Unified Operations Manager 8.7 with Service Monitor.
    The data sheet says Win 2008 (R1) Enterprise edition.
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/data_sheet_c78-697491.html
    The installation guide says Win 2008 (R1) Std or Enterprise.
    https://www.ciscosystems.net/en/US/docs/net_mgmt/prime/unified_operations_manager/8.7/install/guide/cuom_installguide.book.pdf
    My server is running on Windows 2008 (R1) Standard Edition, will I be able to install Cisco Prime UOM 8.7 on this server????
    The hardware meets the requirement. I am confused only with the Windows Server OS part as both documents are contradicting.

  • Cisco Prime Unified Operations Manager 9.0, "Service Level View" problem.

    Hello to all.
    Hope this mail finds all of you well.
    I have a problem with a CUOM Prime 9.0.
    The customer's infrastracture is a cluster CUCM (VM), 9.1.2.
    The CUCM cluster is up and running and all the cisco devices can be discovered.
    The customer wants to use a Cisco Prime Unified Operations Manager 9.0 in order to monitor all the Cisco devices.
    Also, in the CUOM server have been installed the browser "I.E 8.0" and the browser "Firefox Mozila" (Firefox Setup 10.0.5esr).
    The problem that I faced is that the page "Service Level View" can not be displayed.
    When I try to use the "Internet Explorer" the loading bar is being displayed, but can not be completed.
    When I try to use the "Firefox Mozila" a message is being displayed and prompt me to install the last Flash Player,
    which is already installed.
    Can anybody help me on that  problem?
    Thank you very much in advance.
    Regards,
    Isidoros

    Finally, the solution of the problem was:
    1-stop the daemon manager “net stop crmdmgtd” 
    2- Delete the xml files available under(please take backup from them) :
    CSCOpx\objects\sir\work
    CSCOpx\objects\topo\work
    3-Start the daemon manager  net start crmdmgtd  (wait for 20 minutes until all process are up )

  • Cisco Video Surveillance Manager 6.3.1

    I would like to know which Axis IP Camera models ( fixed & PTZ ) can be supported by Cisco VSM 6.3.1
    and where to find complete list of supported 3rd party IP cameras.
    Tnx

    I can no longer seem to find an online copy of the original Support Devices for VSM 6.3.1 PDF, but I do have a local copy.
    The closest I can find online (and likely nearly identical) is for 6.3.2MR2 at:
    https://www.ciscoet.com/resource/vsm-632-mr2-supported-devices-list
    I'll attempt to attach the 6.3.1 PDF to this response, but I'm not sure if it's allowed.
    Cheers!

  • Cisco Operation Manager and Service Monitor on Separate Machine?

    Hi,
       Can we install Cisco Unified Operation Manager and Server monitor on separate machines?
      What will be the procedure to do so?

    Yes You can install Service Monitor in a stand alone server. For Service Monitor to coreside on a system with other applications in the Cisco Prime Unified Communications Management Suite, see the coresidence requirements in
    Installation Guide for Cisco Prime Unified Operations Manager 9.0.
    Also you can check Coresidence Guidelines and Coexistence Guidelines.
    Here you can see the server requirements for a coexistent installation of Service Monitor:
    http://www.cisco.com/en/US/docs/net_mgmt/prime/unified_service_monitor/9.0/install/guide/prereq.html#wp1080694
    -Thanks

  • Single server solution for video surveillance

    Do we have a single server solution for Cisco video surveillance? Something similar to the Business Edition 6000 series in unified communications.
    If yes, please provide information.
    Thanks in advance

    Cisco VSM can be used as single server solution depending upon your requirement. you could install Management server (which manages recordings) and VSOM (Operation Manager which manages you user profile and user interface) on a single server.
    please refer to below doc for more info.
    http://www.cisco.com/c/dam/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/7_0/srnd/vsm_7_0_srnd.pdf

  • Cisco Video Camera Products

    Hi all,
    Can you throw some light on a requirement for a client of mine, on the isco's IP camera Products for monitoring hi Pharma Research Labs, spread over a 3000 s. mtr area.
    rgds,
    Durai, Bangalore, India

    Cisco Video Surveillance Value Proposition Cisco Systems? offers network-centric video surveillance software
    and hardware that supports video transmission, monitoring, recording, and management. These products protect customers'
    existing investments in analog equipment while enabling these devices to operate as part of an IP network-centric deployment.
    Cisco? products enable any-to-any multivendor device interoperability, allowing customers to build best-in-class video surveillance systems that optimize price, performance, and function. Cisco video surveillance works in unison with the advanced features and functions of the IP network infrastructure, i.e. switches, routers and other network security devices.
    Try:
    http://www.cisco.com/en/US/products/ps6936/prod_literature.html

  • Unified Operations Manager 8.x Software Download

    Hello Team,
    We has been ordered L-UOM-B-500=   Unified Operations Manager 8.x up to 500 IP Phone LIC-K9 ,now customer need to download the software ,Please suggest how we can download the software.
    Thanks Is Advance

    Hi there,
    The OVA's and .zip are located here
    Downloads Home
    Products
    Unified Communications
    Unified Communications Management
    Cisco Prime Unified Operations Manager
    Cisco Unified Operations Manager 8.6
    Unified Operations Manager Software-8.6
    Cheers!
    Rob
    "When it comes to luck you make your own  " 
    - Springsteen

  • Error in communicating with DCR server (Operations Manager 8.5)

    Hi,
    I just installed Operations Manager 8.5 on a new server. And, although I'm able to login to the OM, I'm unable to add any devices to the DCR. When attempting to add the device the following error is returned:
    "Error in communicating with DCR Server
    DCR Server may be down. Please start DCR server and then refresh the page. "
    The same error is returned when an attempt is made toaccess the screen to change the mode (standalone/master/slave.) However, according to pdshow output DCRServer is up and running:
    Process= DCRServer
    State  = Running normally
    Pid    = 9220
    RC     = 0
    Signo  = 0
    Start  = 7/29/2011 2:46:33 PM
    Stop   = Not applicable
    Core   = Not applicable
    Info   = DCRServer is up and running
    I've browsed the site and tried all suggestions for LMS since I didn't see any for OM. No success.
    Any/all suggestions are much appreciated.
    Kind regards,
    Bart

    It appears the answer is rather simple. According to a trusted source who works for a Cisco training partner, one must wait before even attempting a login into OM.
    Apparently,  it takes about 25 to 30 minutes for all the services to start. Any attempt to login to the OM may corrupt the  database. This is based on CiscoWorks.  When command "net stop crmdmgtd" is issued it takes about 5 minutes to stop the service and a confirmaiton that the service was stopped is displayed. However, when starting the service with "net start crmdmgtd"  there is no confirmation that it started successfully. One may look into ":\ program Files\CSCOpx\objects\dmgt\ready" directory for a _lock file." As long as the lock file is present one shouldn't  use the browser to login. However, I was advised the best approach is to restart the service and give it 30 minutes.
    It worked for me
    Kind regards,
    Bart.

  • Event in Cisco Unified Operations Manager makes no sense

    Hi
    The ennvironement is as follows:
    3 CCM 4.x Cluster and lot of h323 Gateways. All is controlled by a gatekeeper.
    For monitoring purposes I'm running a Cisco Unified Operations Manager 2.0.2. From a h323 gateway I recieve an event, that there happend packet loss and that the MOS was below the critical MOS threshold. As destination I see another h323 gateway in the same cluster. What does this mean? For me there is never voice between these 2 gateways. For me this event makes no sense. On the gateways everything looks fine, there are no drops or errors neither on the interface nor on the service-policy.
    Any idea why it's generating this event?
    Regards
    Peter

    Hi Peter,
    I think it would be best if you could get a packet capture (at the point of the 1040 sensor) during the times of one of these low MOS scores and then open a TAC case. The TAC engineer will need to contact the 1040 sensor developers to understand how exactly they are calculating packet loss and the packet capture will help greatly in finding the root cause. There are two components to packet loss for a 1040 sensor.
    1) Actual network packet loss (i.e. based on missing sequence numbers).
    2) Packets lost in the jitter buffer emulation (packet discards). This will
    count as a packet loss for any packet that arrives 20ms past its expected
    arrival time OR any "out of order" packet. Since the packets for a G711 are
    sent at a 20ms rate, a packet which is delayed 20ms may arrive out of order and
    be counted as lost.
    Sri

Maybe you are looking for

  • HT4623 how do i update from ios 4 to ios 6 without using itunes?

    i have recently got a iphone 4 but is still on the ios version ios 4.3.3 and need to update it badly! however the softwear update option is not in my settings? help!!

  • How to check the date in the date format

    hi all, i am using db10g i have to read the data column from some source. I should accept as it is and validate whether that date is in the date format how can i validate this condition? Thanks..

  • Information about constraints by using SQL query?

    Hi how can we view all the definition of a constraint by using SQL query. Suppose I create following tables: CREATE TABLE supplier ( supplier_id numeric(10) not null, supplier_name varchar2(50) not null, contact_name varchar2(50), CONSTRAINT supplier

  • Edit LOV of objects in universes build from Bex Queries

    Hi, We are creating webi from universes build from Bex Queries. Can anyone please tell me, is there any way to edit list of values for the objects in universes coming from Bex though i can see that option for edit/display LOV is greyed out. for eg--

  • Will a wet dropped 20 inch Cinema display work?

    I have a Cube and 2 ower Mac G3s I had been eyeing a display for ages at a local junk store Hard Off in Japan 'Do not laugh ! in the past years since the Earthquake the Jaanese around Sendai have been throwing out broken things caused by the 2011 Ear