Cisco view for Cisco 7201 router

Hi ,
We have LMS 3.0.1 and we are not able to get cisco view for Cisco 7201 router.
Any help would be appricated.
thanks,
Samir

Make sure you have version 22.0 of the Rtr7000 CiscoView package loaded. You can update your CiscoView packages under Common Services > Software Center > Device Update.

Similar Messages

Looking for Cisco service providers outside of USA

I am looking for Cisco service providers in Guyana.
It can be a third party vendor for Cisco partner for Cisco infrastructure maintenance.
Thanks,
Sam

Hello, xszhuMerak1.
I can help you find local Cisco support on your area. Would you be able to tell me for what Cisco infrastructure this support will be? Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

Hi All,
We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
Any help would be appriciated.
Thanks in advance
Samir

Hi,
*** Device Details for d0151-100 ***
Protocol ==> Unknown / Not Applicable
Selected Protocols with order ==> TFTP,SSH,HTTPS
Execution Result:
Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
This is the error while doing syn archieve.
I am not sure about Rtr7000 version but we have latest Rtr7000.
Waiting for your kind reply.
Samir

How to open a port for CCTV on Router Cisco DDR2201v1

Hello, I want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work. Could you help me please? Thanks
Can anybody tell me what's wrong with this configuration.

Hi.
Welcome to Cisco Home Community.
Please follow this link, https://supportforums.cisco.com/ for the correct product category.
Thanks.

What's "SAVE" configuration command for Cisco switch/ router?

What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well,
but so long, any other command that easy to remenber?

What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well, but so long,
any other command that easy to remenber?
yes, here: Switch#write,and want to know more about the Cisco switch, please visit:http://www.3anetwork.com/cisco-switches-price_c1

How to create custom GUI interface for Cisco router?

Hello,
I am working on a Cisco solution and I have my router configured for the solution I need. However, if a non-cisco person needs to use my solution then I think he will need a GUI interface which will have few "buttons" which when clicked will run some Cisco commands on Cisco router to make it work. Is there a way to design such GUI interface which is compatible with Cisco routers? I know Cisco has SDM, but that is too involved and detailed, which is useful only for people who know atleast a little bit about Cisco. Here I am looking at crowd who will have 0 knowledge of Cisco.
Please let me know if something like this can be done. If yes, how and how easily?
Thank you.

There are lots of ways to do this - you can use SNMP or even HTTP to push or pull commands from Cisco devices. How easy it is to create a GUI depends on your programming skills. I would guess a simple web page triggering backend scripts would be the easiest way to do this.

Uploading/Installing procedure for device packages in Cisco View/RME

Hi,
Running LMS3.2 with HUM 1.2.
In cisco view when we tried for below mwntioned devices it says "Device Package for these device is not available".
WS-C2960S
CISCO2921
CISCO3945E.
Please let me know the link to download the device packages for above devices and the procedure to install it on LMS.
Thanks & Regards,
Krishna

Hi Krishna,
Replace the attached file (vds.properties) in the below location :
NMSROOT\CSCOpx\lib\classpath\com\cisco\nm\xms\vds
then Restart the Daemon Manager ..
NOTE : Please take the Bcakup of your Existing file (vds.properties)
--Then go to common service > software center > device update >> check for the Device Pcakages , you will be able to see the Device Packages now..
Thanks--
Afroj
If this post answers your question, please click the "Correct Answer" button"

What is the suitable outdoor antenna for cisco 819 4g router ?

what is the suitable and highest gain outdoor antenna for cisco 819 4g router ?

I believe your trying to ask a different question. But here are the three options i know of:
Multiband Omni-Directional Stick Outdoor 4G Antenna (We have used a number of times)
Multiband Low-Profile Saucer Outdoor 4G Antenna
Multiband Panel Outdoor 4G Antenna
The panel I have no experience with, so I can not speak on what gains you will receive. But that is the hard part of the question for me to answer, high gains. Because in my experience, there is so many factors to account for and most of them are outside our control. But it looks like the Panel is the winner. Again I have zero experience with, but we install the Omnidirectional stick all the time and make good connections. Of course for the areas that have good cell coverage. Also to add, the length of the connecting cable plays a part.
Hope that help.
Nick

IOs for cisco 1900 series router

Hi,
Kindly provide me the IOS version (cisco 1900 router) which can fix the below listed Bugs,
Cisco IOS TCP Listener Crafted Packets Remote DoS (CSCek37177)
Cisco Multiple Devices Crafted IP Option Remote Code Execution (CSCeh52410)
Cisco IOS System Timers Remote Overflow (CSCei61732)
Cisco IOS Secure Shell Server TACACS+ Multiple DoS (CSCed65778, CSCed65285)
Cisco IOS IKE XAUTH ISAKMP IPSec SA Establish Authentication Bypass(CSCeg00277)
Cisco IOS Telnet Service DoS (CSCef46191)
Cisco IOS H.323 Protocol Implementation Flaws Cisco IOS Malformed IPv4 Packet Remote DoS Cisco SSH2 Server/Client Malformed Packet Remote DoS (CSCdz60229, CSCdy87221, CSCdu75477)
Cisco IOS SSH Large Packet CPU Consumption DoS (CSCdw33027) Cisco SIP Crafted INVITE Message Handling DoS (CSCdz39284, CSCdz41124) Cisco IOS Data-link Switching (DLSw) Capabilities Exchange Remote DoS (CSCsf28840)
Cisco IOS AAA RADIUS Long Username Authentication Bypass (CSCee45312)
Cisco IOS TCLSH AAA Command Authorization Bypass (CSCeh73049)
Cisco IOS MMP Stack Group Bidding Protocol (SGBP) Crafted UDP Packet Remote DoS (CSCsb11124)
Cisco IOS IPv6 Packet Processing Arbitrary Code Execution (CSCef68324)
Cisco IOS Malformed BGP Packet Processing Remote DoS (CSCee67450)
Cisco IOS Multi Protocol Label Switching (MPLS) Packet Remote DoS (CSCeb56909)
Cisco IOS IPv6 Packet Processing Remote DoS (CSCed40933)
Cisco IOS SCCP Control Protocol Malformed Message DoS (CSCee08584)
Cisco IOS OSPF Packet Handling DoS (CSCec16481) Cisco IOS ARP Table Overwrite DoS (CSCdu81936)
Regards,
Bala

Hi,
The Current running IOS version is 12.2(4)T7. I tried through bug toolkit. but i couldn't able to consolidate the IOS to fix these bugs.
Regards,
A.Bala
leolaohoo wrote at Tue Jan 25 02:20:52 GMT+05:30 2011:
>Balakrishnan Appavu,
>
>A new message was posted in the Discussion thread "IOs for cisco 1900 series router":
>
>https://supportforums.cisco.com/message/3277195#3277195
>
>Author : leolaohoo
>Profile : https://supportforums.cisco.com/people/leolaohoo
>
>Message:

Cisco tool for building router/switch configurations

Is there a tool on Cisco website that lets you build your own configurations of Cisco routers etc prior to you purchasing them? i.e. Giving you a complete list of part IDs ?

Hi
Your question is not clear , if you asked about a tool which can help you to do a configuration for your purchase order for routers , switches , any solution for Cisco . You can configure your chassis , cards , SFPs, Power , and so on. Please use the below link:-
https://cisco-apps.cisco.com/cisco/psn/commerce
Thank you
please rate all useful infomration

Ask the Expert: Cisco TelePresence for the Enterprise

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Telepresence® for the enterprise.
Cisco experts Jaret, Fernando, and Fred will be covering all Cisco TelePresence products. Topics include Cisco TelePresence endpoints and TelePresence infrastructure such as the Cisco TelePresence Video Communication Server (VCS), Cisco Expressway Series, Cisco Unified Communication Manager (CallManager), Cisco TelePresence Servers (MSE 8710, on Virtual Machine, etc.), MCU (MSE 8510, etc.), Cisco TelePresence Management Suite (TMS), and all other Cisco TelePresence related devices.
Jaret Osborne is an 8-year Cisco Advanced Services veteran. In his Advanced Services tour, Jaret has covered all aspects of Cisco Unified Communications and TelePresence products, including both enterprise and service provider verticals. Most recently Jaret has been working with global service providers supporting their Cisco TelePresence as a Service offerings while also incubating new cloud services at Cisco.
Fernando Rivas is a Cisco Advanced Services NCE, starting in the Cisco Technical Assistance Center (TAC), 2007, on the Collaboration Technology Team mastering the Cisco Unified Communication technologies and specialized in call control CUCM,VCS) and conferencing (MeetingPlace, Telepresence). In 2011, he joined Cisco Advanced Services as a member of the Cisco Collaboration team and participated in several Cisco TelePresence and video-related technologies deployments. Currently he is a member of the Video Cloud Technology Team, supporting video exchanges in several and architecting new private video cloud solutions for large enterprises. Fernando holds a routing and switching CCIE® certification (22975).
Fred Mollenkopf is a Cisco Advanced Services Network consulting engineer working at Cisco for the last 7 years. Fred has led some of the largest Cisco Unified Communication and Collaboration deployments done for Cisco customers and partners. Over 15 years’ experience in data networking with a specialization in Cisco Unified Communications in 2004. Currently he is a member of the SP Video Advanced Services Team, supporting SP video exchanges and the Cisco Telepresence solutions. Fred maintains an active CCIE® in Voice (17521).
Remember to use the rating system to let Jaret, Fernando, and Fred know if you have received an adequate response.
Because of the volume expected during this event, Jaret, Fred, and Fernando might not be able to answer every question. Remember that you can continue the conversation in the Collaboration, Voice and Video Community, under the sub-community TelePresence, shortly after the event. This event lasts through August 15, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Tenaro,
Additionally here are the most common login issues. Unfortunately this includes items related to Presence implementation but I commented where we did not use these in our lab setup for CUCM Phone Capabilities only.
Login Issues
Problem:
Jabber Unable to Sign-in Through MRA
Solution
This can be caused by a number of things, a few of which are outlined below.
1. Collaboration Edge SRV record not created and/or port 8443 unreachable
For a jabber client to be able to login successfully using MRA, a specific collaboration edge SRV record must be created and accessible externally. When a jabber client is initially started it will make server DNS SRV queries:
_cisco-uds : this SRV record is used to determine if a CUCM server is available.
_cuplogin : this SRV record is used to determine if an IM&P server is available.
_collab-edge : this SRV record is used to determine if MRA is available.
If the jabber client is started and does not receive an SRV answer for _cisco-uds and _cuplogin, and does receive an answer for _collab-edge then it will use this answer to try to contact the Expressway-E listed in the SRV answer.
The _collab-edge SRV record should point to the FQDN of the Expressway-E using port 8443. If the _collab-edge SRV is not created, or is not externally available, or if it is available, but port 8443 is not reachable, then the jabber client will fail to login.
2.  Unacceptable or No Available Certificate on VCS Expressway
After the jabber client has received an answer for _collab-edge, it will then contact the expressway using TLS over port 8443 to try to retrieve the certificate from the expressway to setup TLS for communication between the jabber client and the expressway.
If the Expressway does not have a valid signed certificate that contains either the FQDN or domain of the Expressway, then this will fail and the jabber client will fail to login.
If this is occurring, the you should use the CSR tool on the Expressway, which will automatically include the FQDN of the expressway as a Subject Alternative Name.
MRA requires secure communication between the Expressway-C and Expressway-E, and between the Expressway-E and external endpoints.
Expressway-C Server Certificate Requirements:
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation. The Expressway-C should automatically include these in the CSR provided that an IM&P server has already been discovered on the Expressway-C.
The names in FQDN format of all Phone Security Profiles in CUCM configured for TLS and used on devices configured for MRA. This allows for secure communication between the CUCM and Expressway-C for the devices using those Phone Security Profiles.
Expressway-E Server Certificate Requirements:
All domains configured for Unified Communications. This includes the domain of the Expressway-E and C, e-mail address domain configured for Jabber, and any presence domains.
The Chat Node Aliases configured on the IM&P servers. This is required if you are doing XMPP federation.
The MRA Deployment guide describes this in greater detail on pages 17-18. (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Ac...
Note: In our lab for testing Phone Capabilities only, we did not include the Chat Node Aliases in the certificate as we were not using IM&P.
3.  No UDS Servers Found in Edge Config
After the Jabber client successfully establishes a secure connection with the Expressway-E, it will ask for its edge config. This edge config will contain the SRV records for _cuplogin and _cisco-uds. If these SRV records are not returned in the edge config, then the jabber client will not be able to proceed with trying to login.
To fix this, make sure that _cisco-uds and _cuplogin SRV records are created internally and resolvable by the Expressway-C
More information on the DNS SRV records can be found on page 10 of the MRA deployment guide for X8.1.1 (http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-1-1.pdf)
Note: In our lab for testing Phone Capabilities only, we did not include the DNS SRV for _cuplogin.
4.  The Expressway-C logs will indicate the following error: XCP_JABBERD Detail="Unable to connect to host '%IP%', port 7400:(111) Connection refused"
If Expressway-E NIC is incorrectly configured, this can cause the XCP server to not be updated. If the Expressway-E meets the following criteria, then you will likely have this issue:
Using a single NIC
Advanced Networking Option Key is installed
Use Dual Network Interfaces option is set to “Yes”
To correct this problem, change the “Use Dual Network Interfaces” option to “No”
The reason this is a problem is because the Expressway-E will be listening for the XCP session on the wrong network interface, which will cause the connection to fail/timeout. The Expressway-E listens on TCP port 7400 for the XCP session. You can verify this by using the netstat command from the VCS as root.
Note: We used a Dual Network Interface Expressway for testing but were not using XCP, so this was not applicable to us.
5.  VCE-E Server hostname/domain name does not match what is configured in the _collab-edge SRV.
If the Expressway-E Server hostname/domain name does not match what was received in the _collab-edge SRV answer, the jabber client will not be able to communicate to the Expressway-E. The Jabber client uses the xmppEdgeServer/Address element in the get_edge_config response to establish the XMPP connection to the Expressway-E.
This is an example of what the xmppEdgeServer/Address would look like in the get_edge_config response from the Expressway-E to the Jabber client:
<xmppEdgeServer>
<server>
<address>ott-vcse1.vcx.cisco.com</address>
<tlsPort>5222</tlsPort>
</server>
</xmppEdgeServer>
To avoid this, make sure that the _collab-edge SRV record matches the Expressway-E hostname/domain name. Enhancement CSCuo83458 has been filed for this.
Note: This was one of our issues when we first setup. We adjusted our Expressway-E to insure the below:
System > Administration > System Name this was the FQDN
System > DNS > System Host Name was the host portion of the FQDN
System > DNS > Domain Name was the domain portion of the FQDN
System > Clustering > Cluster Name (FQDN for Provisioning) was the FQDN
6. Unable to log into certain IM&P servers. VCS logs say "No realm found for host cups-example.domain.com, check connect auth configuration"
From the Expressway-E, go to Configuration -> Unified Communications -> IM&P Servers. Open each server and click "Save" again. Not sure exactly why this happens.
Note: This was N/A to our test and can be ignored with Phone Capabilities only.
Thanks
Fred

HP Officejet Pro 8500a prints slowly over wireless on Cisco Linksys Smart Wi-Fi Router EA6500

I have the HP Officejet Pro 8500a. I recenrly change my wiress router to the Cisco Linksys Smart Wi-Fi Router EA6500.
Nearly every time I print, the documement remains "pending" for at least several minutes, sometimes as long as 20, until it finally starts printing. Once it starts printing, the document is printed quickly.
It doesn't matter the size of the document and the time it remains "pending." I've done test pages with just the word "test" in a Microsoft Word document, and it will remain in "pending" for well over five minutes.
If I print over the USB cord, there are no delays.
I need help. I can't figure out how to remedy this long delay when printing wirelessly.
On a side note in case this is helpful, the Linksys router does have a priority setting where you can select up to three devices for priority access (faster connection?), which seems to be more for bandwidth-intensive devices. I tried adding both the laptop I'm printing from and the printer to this priority list, but that did not improve the print connection speed.
Advice please! Thank you.

Hi Jim-Gr,
I understand you have an Officejet 8500A that has started printing very slowly after switching routers. I'm sorry to hear this has happened but will certainly do my best to assist you.
I appreciate you advising that you have tried connecting the printer via USB and it does make a huge difference. I'm also assuming your previous router didn't go this slowly either. With the things you have tried, my assumption is that it's a setting in the router that needs to be changed. If you're not sure how to change things in your router you can generally call the router company and they will walk you through it.
First you will want to ask them if there are any firmware updates for your router, if there are have them perform the update. If it is up to date already then have them make sure your router is broadcasting at a frequency of 2.4 GHz as that's the only frequency the printer works with.
Second, you will want to make sure the following ports are open:
UDP: 427, 161, 137, 138
TCP: 9100, 9220, 9500, 137, 139, 427
Once all of this is updated, then I would suggest you power cycle everything (turn off the printer and the PC, pull the power on the router for 30 seconds and then turn the other two back on once lights are back to normal) and try again. This should allow your printing speed to go back to normal
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Cisco 876 ADSL over ISDN Router

I am facing some problem in using ISDN bri S/T interface for connectivity to HO PRI router.I am not using the ATM interface of this router.The isdn status always shows that the isdn layer 1 and 2 is deactivated. IF i connect the same bri cable to other isdn router it works fine.
Is their any special configuration or command required in 876 router for the isdn dialing?
I found on cisco that the 876 router ISDN bri S/T interface is for the out-of-band mangement and dial backup.
Can i use this interface for the normal isdn dialing?
need some clarification.
regards,
khalid siddiq

Find the attach detail.
SCIENTECH-AVEER#
SCIENTECH-AVEER#sh runn
SCIENTECH-AVEER#sh running-config
Building configuration...
Current configuration : 1505 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname SCIENTECH-AVEER
boot-start-marker
boot-end-marker
username INET-Rou-ESA password 0 cisco123
no aaa new-model
ip subnet-zero
ip cef
no ftp-server write-enable
isdn switch-type basic-net3
isdn tei-negotiation first-call
interface BRI0
description connected to HQ PRI
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
shutdown
interface FastEthernet2
no ip address
shutdown
interface FastEthernet3
no ip address
shutdown
interface Vlan1
ip address 192.168.201.25 255.255.255.0
interface Dialer0
ip address negotiated
encapsulation ppp
dialer pool 2
dialer string 404444
dialer-group 1
router rip
network 192.168.201.0
network 192.168.251.0
ip classless
no ip http server
no ip http secure-server
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
control-plane
line con 0
password gbm4ibm
login
no modem enable
transport preferred all
transport output all
line aux 0
transport preferred all
transport output all
line vty 0 4
password gbm4ibm
login
transport preferred all
transport input all
transport output all
scheduler max-task-time 5000
end
SCIENTECH-AVEER# sh ver
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
LEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 14-Jun-05 18:58 by ealyon
ROM: System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
ROM: Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI
2, RELEASE SOFTWARE (fc1)
SCIENTECH-AVEER uptime is 22 hours, 13 minutes
System returned to ROM by reload
System image file is "flash:c870-advsecurityk9-mz.123-8.YI2.bin"
Last reload reason: Reload command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 876 (MPC8272) processor (revision 0x100) with 118784K/12288K bytes of memo
ry.
Processor board ID FCZ100223M7
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ISDN Basic Rate interface
1 ATM interface
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)
Configuration register is 0x2102

Enquiry on RMA for Cisco Products

Hi,
Recently i ran into some issue when processing a RMA for Cisco 3925 router.
I've RMAed the chassis but the i got the part, it didnt have a system board.
When i contacted Cisco, they mentioned that the system board can/must be RMAed separately.
Is there any documentation or list for Cisco Products that has system board as a FRU?
Thanks

Recently i ran into some issue when processing a RMA for Cisco 3925 router.I've RMAed the chassis but the i got the part, it didnt have a system board.
Before the replacment part/unit is shipped, you always get a shipping document in an email. This document will list down what item(s) are being shipped.
Did you get this?

Unable to configure PPPoE in Cisco 877 for DSL connectivity

Hi,
I am trying to setup a DSL connection with Cisco 877 as the CPE. The CLI does not list the option of PPPoE for protocol in the vpdn group config prompt. If i manually enter PPPoE as the encapsulation, the vpdn group configured vanishes from the config!
Any clues? Has anyone got a sample config for a cisco 877 connecting to DSL through PPPoE. I followed the sample config in the TAC website giving the example for cisco 827-pppoe -DSL.
Some more inputs - as soon as i connect the DSL line the ATM interface line protocol comes up but unable to see anything in debug vpdn or debug ppp auth. The router IOS feature set is Advanced Security services.
Regards
NSG

Hi Gnanavel,
You need bba-group instead :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftpprfls.htm#wp1088274
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541b8.html#wp1027195
Thanks and Regards,
~Zulfiqar

Cisco view for Cisco 7201 router

Similar Messages

Maybe you are looking for